C2803 CDMA 1X Mobile Phone Copyright © 2008 Huawei Technologies Co., Ltd. and other Huawei trademarks are the trademarks or registered trademarks of Huawei Technologies Co., Ltd. in the People’s Republic of China and certain other countries. All other trademarks mentioned in this manual are the property of their respective holders. The information in this manual is subject to change without notice.
Table of Contents Your Phone ............................................................................... 1 Keys and Functions .................................................................. 2 Screen Icons.............................................................................. 3 Menu Tree................................................................................. 5 Installing the UIM Card and Battery ........................................ 6 Removing the Battery and UIM Card ..............
Your Phone Earpiece Screen Navigation Keys Right Soft Key Left Soft Key End/Power Key Dial/Send Key Number Keys Key Key Charger Interface Microphone 1
Keys and Functions Press… To… z z View the dialled calls in the standby mode. Make or answer a call. z Power on or off the phone (by pressing and holding it). z End a call or reject an incoming call. z Return to the standby mode. Select the option displayed on the lower left corner of the screen. Select the option displayed on the lower right corner of the screen.
Press… To… z z – z z z z z z z Enter numbers and characters. Speed-dial phone numbers in the standby mode (by pressing and holding the 1-9 keys). Select a submenu item labeled the corresponding number. Enter the * symbol. Activated or deactivated the Vibrate Only profile in the standby mode (by pressing and holding it). Provide different functions according to the phone features being used. Enter the # symbol. Lock the keypad in the standby mode (by pressing and holding it).
Icon Description Alarm clock on Icon Description Keypad locked Message received Voice message received Emergency/Urgent message received Memory for messages full 4
Menu Tree Messages Fun & Utility 1 Write Message 2 Inbox 3 Outbox 4 Draft 5 Voice Mail 6 Templates 7 Message Settings 8 Delete All 1 Alarm 2 Scheduler 3 Calculator 4 Gallery 5 Game Profiles 1 General 2 Vibrate Only 3 Silent 4 Outdoor Phone Book 1 Search 2 Add New 3 Groups 4 Speed Dial 5 Copy All 6 Delete All 7 My Phone No.
Installing the UIM Card and Battery The User Identity Module (UIM) card and the T-SIM card are the same, that is, Subscriber Identity Module. Make sure that the golden area on the UIM card is facing downwards and the cut-off edge is correctly aligned with the card holder. 1 2 3 Removing the Battery and UIM Card Make sure that your phone is powered off. 2 1 3 Charging the Battery 1. Connect the charger to the charger interface at the bottom of your phone. 2.
4. When the charging icon becomes static, the battery is fully charged. Disconnect the charger from the AC power socket. 5. Disconnect the charger from the phone. Using the Function Menu 1. In the standby mode, press (Menu) to display the Menu interface. 2. Press to scroll to a menu item. 3. Press (Select) to display the menu. 4. Display the submenu in either of the ways: z z Press to scroll to a submenu item and press (Select) to display the submenu.
z To call a number with an extension, press twice to insert "P", or press three times to insert "T" between the phone number and the extension. to dial the number. 2. Press 3. Press to end the call. z When the phone is locked, enter the lock code to unlock the phone first; otherwise, you can make emergency calls or answer calls only. z In the standby mode, press to view the dialed calls. Select a record and press to dial. z Select a contact from the phonebook and press to dial.
Activating your Speaker phone During a call, press (Options) to select Speaker on/Speaker off for activating or deactivating your phone speaker. Phone Lock The phone lock function protects your phone from unauthorized use. The default phone lock code is 0000. You can change it into any numeric string of 4 digits. If the phone lock function is enabled, you need to enter the correct phone lock code when the phone is powered on or in the standby mode.
When the Keyguard function is enabled, if there is no operation on the phone for a preset period in the standby mode, the keypad is locked automatically. Changing the Text Input Modes The indicator of the current text input mode is displayed on the screen. In the editing mode, press z to change the input mode. In the editing mode, press (Clear) once to delete the letter on the left of the cursor. Press and hold (Clear) to delete all the letters at a time. z In the "eZiEn" input mode, press space.
4. Press Press to enter the word. to enter the word and a space. Entering English (ABC, Abc and abc) In the "ABC", "Abc" or "abc" input mode, you can press a key labeled the desired letters once to enter the first letter on the key, twice to enter the second letter on the key, and so on. If the letter you want to enter is on the same key as the previous one, you can enter the latter only after the cursor appears again or after you press to move the cursor to the next space.
Warnings and Precautions Electronic Device z Power off your phone near high-precision electronic devices. The phone may affect the performance of these devices. z Such devices include hearing aids, pacemakers, fire alarm systems, automatic gates, and other automatic control devices. If you are using an electronic medical device, consult the device manufacturer to confirm whether the radio wave affects the operation of this device.
z z z z z z Area for storing fuels (such as the bunk under the deck of a ship) Device/vehicle for transporting and storing fuels or chemical products Area with chemical substances and particles (such as granule, dust and metal powder) in the air Area with the sign of "Explosives" Area with the sign of "Power off bi-directional wireless equipment" Area where it is generally suggested to stop the engine of a vehicle Traffic Safety Please observe local laws and regulations on phone use.
Storage Environment z Do not place magnetic storage media such as magnetic cards and floppy disks near the phone. Radiation from the phone may erase the information stored on them. z Do not put your phone, battery, or other accessories in containers with strong magnetic field, such as an induction cooker and a microwave oven. Otherwise, circuit failure, fire, or explosion may occur. z Do not leave your phone, battery, or charger in a very hot or cold place.
z Do not allow children to touch the small fittings. Otherwise, suffocation or gullet jam can be caused if children swallow the small fittings. Operating Environment The phone, battery, and charger are not water-resistant. Keep them dry. Protect the phone, battery and charge from water or vapor. Do not touch the phone with a wet hand. Otherwise, short-circuit and malfunction of the product or electric shock may occur. z Do not use the phone in dusty, damp and dirty places or places with magnetic field.
z While using the mobile phone, observe the local laws and regulations, and respect others' privacy and legal rights. Clearing and Maintenance Before you clean or maintain the phone, power off the phone and disconnect it from the charger. Otherwise, electric shock or short-circuit of the battery or charger may occur. z Do not use any chemical detergent, powder, or other chemical agent (such as alcohol and benzene) to clean the phone and the charge. Otherwise, part damage or a fire can be caused.
collected separately and properly recy-cled under local regulations. Emergency Call You can use your phone for emergency calls. However, connections in all conditions cannot be guaranteed. You should never rely solely on the phone for essential communications. Battery Use the battery approved by the manufacturer only. Otherwise, explosion may occur. z Do not dispose of the battery in fire. Otherwise, the battery may ignite or explode.
z z Do not take out the battery when the phone is turned on. If you do not use the battery for a long time, store it in normal temperature after charging. Charger Use the charger approved by the phone manufacturer only. Any violation of this rule may result in fire or malfunction of the charger. z Do not short-circuit the charger. Short-circuiting the charger may cause fire or malfunction of the charger.
z Once the liquid such as water leaks into the charger, remove the plug of the charger from the socket immediately. Otherwise, overheating, fire and other malfunction may occur. Certification Information (SAR) THIS DEVICE MEETS THE GOVERNMENT'S REQUIREMENTS FOR EXPOSURE TO RADIO FREQUENCY ELECTROMAGNETIC FIELD. Your mobile phone is a low-power radio transmitter and receiver. When it is turned on, it emits low levels of radio frequency energy (also known as radio waves or radio frequency fields).
been tested and meets FCC RF exposure guidelines when the handset is positioned a minimum of 15 mm from the body with an accessory that contains no metal part. Use of other accessories may not ensure compliance with FCC RF exposure guidelines. The SAR limit adopted by the USA and Canada is 1.6 watts/kilogram (W/kg) averaged over one gram of tissue. The highest SAR value reported to the FCC and IC for this device type when tested for use at the ear is 1.050 W/kg, and when properly worn on the body is 1.
z Consult the dealer or an experienced radio/TV technician for help. Warning: Changes or modifications made to this equipment not expressly approved by HUAWEI may void the FCC authorization to operate this equipment.
