C2206 CDMA 1X Mobile Phone Copyright © 2008 Huawei Technologies Co., Ltd. and other Huawei trademarks are the trademarks or registered trademarks of Huawei Technologies Co., Ltd. in the People’s Republic of China and certain other countries. All other trademarks mentioned in this manual are the property of their respective holders. The information in this manual is subject to change without notice.
Table of Contents Your Phone ............................................................................... 1 Keys and Functions .................................................................. 2 Screen Icons.............................................................................. 3 Menu Tree................................................................................. 4 Installing the UIM Card and Battery ........................................ 5 Removing the Battery and UIM Card ..............
Your Phone Earpiece Screen Navigation Keys Right Soft Key Left Soft Key Talk/Send Key End/Power Key Number Keys Headset Jack Charger Interface * Key # Key Speaker 1
Keys and Functions Press… To… z z z z z View the dialled calls in the standby mode. Make or answer a call. Power on or off the phone (by pressing and holding it). End a call or reject an incoming call. Return to the standby mode. z Select the option displayed on the lower left corner of the screen. z Select the option displayed on the lower right corner of the screen.
Press… To… z z z z z z Enter the * symbol. Enable or disable the Vibrate Only profile in the standby mode (by pressing and holding it). Provide different functions according to the phone features being used. Enter the # symbol. Lock the keypad in the standby mode (by pressing and holding it). Provide different functions according to the phone features being used.
M enu Tree Messages Tools 1 Write Message 2 Inbox 3 Outbox 4 Draft 5 Voice Mail 6 Templates 7 Message Settings 8 Delete All 1 Recorder 2 Alarm 3 Scheduler 4 Calculator 5 Gallery Contacts 1 Search 2 Add New 3 Groups 4 Speed Dial 5 Copy All 6 Delete All 7 My Phone No.
Installing the UIM Card and Battery The User Identity Module (UIM) card and the T-SIM card are the same, that is, Subscriber Identity Module. Make sure that the golden area on the UIM card is facing downwards and the cut-off edge is correctly aligned with the card holder. b a Removing the Battery and UIM Card Make sure that your phone is powered off. a b Charging the Battery 1. Connect the charger to the charger interface at the bottom of your phone. 2. Connect the charger to an AC power socket. 3.
4. When the charging icon becomes static, the battery is fully charged. Disconnect the charger from the AC power socket. 5. Disconnect the charger from the phone. Using the Function M enu (Menu) to display the Menu 1. In the standby mode, press interface. 2. Press to scroll to a menu item. 3. Press (Select) to display the menu. 4. Display the submenu in either of the ways: z z Press to scroll to a submenu item and press (Select) to display the submenu.
3. Press z z to end the call. When the phone is locked, enter the lock code to unlock the phone first; otherwise, you can make emergency calls or answer calls only. In the standby mode, press Select a record and press to view the dialled calls. to dial. z Select a contact from the contacts and press z Select a message in the inbox and press to dial. to dial.
All the voice clips are saved in the Menu > Tools > Gallery > Voice Folder. Switching On the Radio 1. In the standby mode, select Menu > FM Radio. 2. Press (Options) to select Auto Tuning. 3. Press to tune the channel. 4. Press to adjust the volume. Searching for a Channel Auto Tuning (Options) to select Auto Tuning. 2. The phone automatically searches for channels and saves them to the Save Channel. 1. In the FM Radio screen, press M anual Tuning 1.
If the phone lock function is enabled, you need to enter the correct phone lock code when the phone is powered on or in standby mode. PIN and PUK The personal identity number (PIN) protects your UIM card from unauthorized use. The PIN unlocking key (PUK) can unblock the blocked PIN. Both PIN and PUK are delivered with the UIM card. For details, consult your service provider. If you enter wrong PINs for a specified number of times consecutively, the phone asks you to enter the PUK code.
z (Clear) once to delete the In the editing mode, press (Clear) letter on the left of the cursor. Press and hold to delete all the letters at a time. z to enter a space. In In the "eZiEn" input mode, press the "ABC", "Abc" or "abc" input mode, press once to enter a space, twice to enter "0", and three times to move the cursor to the next line. z In the "ABC", "Abc" or "abc" input mode, press repeatedly to enter the commonly used punctuations. In the "eZiEn" input mode, press to enter a full stop.
If the letter you want to enter is on the same key as the previous one, you can enter the latter only after the cursor appears again or after you press to move the cursor to the next space. Entering Hindi You can enter Hindi words in the Hindi input mode, including "eHi"and " हन्दी". Hindi input mode is similar to English input mode. For details, see " Entering English (eZiEn)" and " Entering English (ABC, Abc and abc)".
z z Such devices include hearing aids, pacemakers, fire alarm systems, automatic gates, and other automatic control devices. If you are using an electronic medical device, consult the device manufacturer to confirm whether the radio wave affects the operation of this device. Pacemaker manufacturers recommend that a minimum distance of 15cm be maintained between a mobile phone and a pacemaker to avoid potential interference with the pacemaker.
z z z Area with the sign of "Explosives" Area with the sign of "Power off bi-directional wireless equipment" Area where it is generally suggested to stop the engine of a vehicle Traffic Safety z z z z z z Please observe local laws and regulations on phone use. Do not use your phone while driving to avoid traffic accident. Secure the phone on its holder. Do not place the phone on the seat or other places where it can get loose in a sudden stop or collision.
z z z z z microwave oven. Otherwise, circuit failure, fire, or explosion may occur. Do not leave your phone, battery, or charger in a very hot or cold place. Otherwise, malfunction of the products, fire, or explosion may occur. Keep the ambient temperature between 0ºC and 45ºC while the battery is being charged. Keep the ambient temperature between –20ºC and 60ºC for storing the battery.
z z z z z z z z z short-circuit and malfunction of the product or electric shock may occur. Do not use the phone in dusty, damp and dirty places or places with magnetic field. Otherwise, malfunction of the circuit may occur. Do not power on or off the phone when it is near your ears to avoid negative impact on your health. When carrying or using the phone, keep the antenna at least one inch (2.
z z z z charger. Otherwise, part damage or a fire can be caused. You can clean the phone and the charger with a piece of soft antistatic cloth that is a little wet. Do not scratch the shell of the phone. Otherwise, the shed coating may cause skin allergy. Once it happens, stop using the phone at once and go to see a doctor. Keep the plug dry when you clean it, to prevent fire. If the phone or any of its fittings does not work, turn to the local authorized service center for help.
z z z z z z z z z z Do not dispose of the battery in fire. Otherwise, the battery may ignite or explode. Do not connect two poles of the battery with conductors such as cables, jewelries or any other metal material. Otherwise, the battery is short-circuited and it may burn your body. Do not disassemble the battery or solder the battery poles. Otherwise fluid leakage, overheat, fire, or explosion may occur.
z z z z z z z z If the power cord is damaged (for example, the lead is exposed or broken), or the plug becomes loose, stop using the cable at once. Otherwise, electric shock, short-circuit of the charger, or fire may occur. Keep the charger dry. Once water or other liquid leaks into the charger, electrical leakage or other faults may occur. Do not use the charger in a dusty and damp environment. Keep the power cord away from any heating appliance.
Governments around the world have adopted comprehensive international safety guidelines, developed by scientific organizations, e.g. ICNIRP (International Commission on Non-Ionizing Radiation Protection) and IEEE (Institute of Electrical and Electronics Engineers Inc.), through periodic and thorough evaluation of scientific studies. These guidelines establish permitted levels of radio wave exposure for the general population.
The SAR limit adopted by the CNIRP is 2.0 W/kg over one gram of tissue. The value guarantees a safe distance to protect mobile phone users and the difference caused by measurement errors. Under different test requirements and frequency, the value varies. Statement This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: z This device may not cause harmful interference.
