User Manual
Table Of Contents
- About This Document
- Contents
- 1 Changes in the BTS3202E LTE Installation Guide
- 2 Installation Preparations
- 3 Information About the Installation
- 4 Unpacking the Equipment
- 5 Obtaining the ESN
- 6 Installation Process
- 7 Installing a BTS3902E
- 7.1 Mounting Kits for Installing a BTS3202E
- 7.2 Installing a BTS3202E on a Pole with the Diameter of 60 mm to 114 mm (2.36 in. to 4.49 in.)
- 7.3 Installing a BTS3202E on a Pole with the Diameter of 114 mm to 400 mm (4.49 in. to 15.75 in.)
- 7.4 Installing a BTS3202E on a Wall
- 7.5 Installing a BTS3202E on a Wood Pole
- 7.6 Installing BTS3202Es on an IFS06
- 8 Installing an AC Surge Protection Box and Related Cables
- 9 Installing Cables
- 9.1 Cabling Requirements
- 9.2 Cable Connections
- 9.3 Installing a PGND Cable and Equipotential Cable
- 9.4 Installing a BTS3202E Power Cable
- 9.5 (Optional) Installing a BTS3202E RF Jumper
- 9.6 Installing Transmission Cables
- 9.7 (Optional) Installing the Alarm Cable
- 9.8 Installing the RGPS Signal Cable (Optional)
- 10 Installing the Housing
- 11 Checking the BTS3202E Hardware Installation
- 12 Performing a Power-On Check on the BTS3202E
- 13 Appendix
----End
7.4 Installing a BTS3202E on a Wall
This section describes the procedure and precautions for installing a BTS3202E on a wall.
Context
CAUTION
You must use adjustable torque tools to tighten all the screws and nuts to the requirements
described in this document.
Procedure
Step 1 Install two adapting plates on the top and bottom of the main mounting bracket. Tighten two
M6x14 screws to 4.8 N·m (42.48 lbf·in.) to secure each of the plate, as shown in Figure 7-11.
Figure 7-11 Installing the adapting plate assembly
(1) Adapting plate
(2) Screw (3) Main mounting bracket
Step 2 Place the adapting plates against the wall, use a level to verify that the plates are horizontal, and
then mark anchor points using a marker, as shown in Figure 7-12.
BTS3202E LTE
Installation Guide 7 Installing a BTS3902E
Issue Draft A (2011-07-30) Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
33