WLTFSR-115GN Quick Start Guide Issue 01 Date 2014-10-15 HUAWEI TECHNOLOGIES CO., LTD.
Copyright © Huawei Technologies Co., Ltd. 2014. All rights reserved. No part of this document may be reproduced or transmitted in any form or by any means without prior written consent of Huawei Technologies Co., Ltd. Trademarks and Permissions and other Huawei trademarks are trademarks of Huawei Technologies Co., Ltd. All other trademarks and trade names mentioned in this document are the property of their respective holders.
WLTFSR-115GN Quick Start Guide For FCC-rev Contents Contents Contents ............................................................................................................................................ ii 1 About This Document .................................................................................................................. 1 2 What You Need ..............................................................................................................................
WLTFSR-115GN Quick Start Guide For FCC-rev 1 1 About This Document About This Document Change History Changes between document issues are cumulative. The latest document issue contains all the changes made in earlier issues. Issue 01 (2014-10-15) This is the first release. Issue 01 (2014-10-15) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
WLTFSR-115GN Quick Start Guide For FCC-rev 2 What You Need 2 What You Need The LTE Indoor CPE Quick Start Guide RJ45 Cable for connecting the CPE and the computer Power Adapter Issue 01 (2014-10-15) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
WLTFSR-115GN Quick Start Guide For FCC-rev 3 LED Indicators 3 LED Indicators 6 5 4 3 2 1 Issue 01 (2014-10-15) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
WLTFSR-115GN Quick Start Guide For FCC-rev 1 2 3 Power LAN VoIP ON Power ON OFF Power OFF ON LAN activated OFF LAN deactivated Flashing Transmitting data ON SIP Register OFF SIP Unregister Flashing 4 5 6 WiFi Status SIM Card Status 3 LED Indicators Unhook ON Wi-Fi ON OFF Wi-Fi OFF Flashing Transmitting data ON SIM card detected OFF No SIM card inside Signal Strength Display signal strength 1 LED: 0<=CINR<8 ON 2 LED: 8<=CINR<12 3 LED: 12<=CINR<16 4 LED: 16<=CINR<24 5 L
WLTFSR-115GN Quick Start Guide For FCC-rev 4 Connectors 4 Connectors 2 3 1 4 5 Issue 01 (2014-10-15) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
WLTFSR-115GN Quick Start Guide For FCC-rev 4 Connectors 1. Reset Button: Press “Reset” button for less than 5 seconds to reboot the device. Or press and hold the Reset button for more than 10 seconds to set the device to factory default settings. 2. SIM card slot: Insert SIM card into the slot with right direction. 3. Telephone Port (RJ-11): Connect your telephone to LTE Indoor CPE using RJ-11 telephone cable. 4.
WLTFSR-115GN Quick Start Guide For FCC-rev 5 Installation 5 Installation Please follow the steps below to install the device: Step1: Connect the device LAN port to your PC with a RJ-45 Ethernet cable that is supplied. Step2: Insert SIM card into the device with right direction. Step3: Insert the power cord into the LTE Indoor CPE's DC-12V power jack; and insert the plug into power outlet. Step4: Switch ON the power. The device will start the booting process.
WLTFSR-115GN Quick Start Guide For FCC-rev 6 Easy Setup 6 Issue 01 (2014-10-15) Huawei Proprietary and Confidential Copyright © Huawei Technologies Co., Ltd.
WLTFSR-115GN Quick Start Guide For FCC-rev 6 Easy Setup Please follow the steps below to configure your device through the web interface: Step1: Open the Web browser (Internet Explorer) and enter the default IP address of the IDU CPE : http://192.168.1.1 Step2: Enter IDU administrator login username/password to access the web management interface. The default username/password is admin/LTEcpe. The page displays in your browser after login; you can simply configure the device settings.
WLTFSR-115GN Quick Start Guide For FCC-rev 7 FCC Statement 7 FCC Statement Federal Communication Commission Interference Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.