User Guide

18
9 Wireless Data Service
Installing Management Program
This section introduces how to install the management program and the hardware driver.
The procedures are for your reference only.
This takes the Windows XP operating system (OS) as an example to describe how to
configure your computer. For other OSs, the configurations may be different and you need
to configure them as required.
 Note:
The OS configuration requirement of a PC: Windows 2000, Windows XP, Vista
(32-bit or 64 bit).
1. Use the USB cable to connect the device and a PC.
2. The system finds the new hardware and installs the modem driver automatically.
3. The installation program automatically starts. Then, the installation interface appears.
 Note:
 If the above interface doesn’t appear, restart the device.
 If the installation program does not automatically start, find the setup.exe file
and double-click it to start the installation.
4. According to the instructions, click Next to proceed.
5. Read License Agreement carefully. Then select I Agree and click Next.
6. Select an installation path and click Next.
 Note:
If you do not select a path, the default path is used. You can click Browse… to
change the path.
7. In the Folder text box, enter the name. Then click Next.
8. If a prompt indicating that the software has not passed Windows Logo testing is
displayed, click Continue Anyway to proceed.
9. Click Close to complete.
10. A shortcut icon appears on the PC desktop and then the device is restarted.