Quick Start Guide

Before using the device, review and download the latest Quick Start

Guide at https://consumer.huawei.com/en/support/.

Getting Started

1. Connect the power adapter to the router, then connect the WAN port

of the router to the LAN port of the optical/broadband modem or a wall-

mounted network port using a network cable.

2. Connect your mobile phone or computer to the router’s Wi-Fi

network (no password required). Check for the Wi-Fi name on the

bottom of the router.

3. Open the browser, then enter 192.168.3.1 in the address bar. Follow

the instructions to set up your router.

Indicator

Steady green Connected to the network

Steady red Not connected to the network

Flashing The router has detected a pairable device

Safety Information

• Please consult your doctor and the device manufacturer to

determine if using your device may interfere with the operation of

your medical device.

• Avoid using the device in a dusty, damp, or dirty place, or near a

magnetic field.

• Ideal temperatures: 0°C to 40°C for operating, -40°C to +70°C for

storage.

• When charging, an adapter should be plugged into a socket nearby

and easily accessible. Use approved power adapters and chargers.

• Do not touch the device or the charger with wet hands. Doing so

may lead to short circuits, malfunctions, or electric shocks.

Disposal and recycling information

The symbol on the product, battery, literature, or packaging

means that the products and batteries should be taken to separate

waste collection points designated by local authorities at the end of the

lifespan. This will ensure that EEE waste is recycled and treated in a

manner that conserves valuable materials and protects human health

and the environment. For more information, please contact your local

authorities, retailer, or household waste disposal service or visit the

website https://consumer.huawei.com/en/.

RF Exposure Information

This device is not a portable radio equipment, it is designed to be used

at a distance larger than 20 cm between the user and/or bystander and

the antenna and/or radiating element of the device.

Only for FCC ID Application

TÜV Rheinland(Shenzhen) Use Only

Huawei Information Assets