Instruction Manual

Note: Please keep the wooden box, foam, plastic bag, fixing structures, and screws in

a safe place for future use.

5. Remove the fixing structures at positions A, B, C, and D as shown in the figure, and restore 4 counter

sink screws(in a plastic bag) to the red indication at positions A, B, and C.

6. Tear off the protective tape at position E that is used to fix the dust bin.

7. All sorted! Let’s commence!

1. Pry up buckles as shown at bottom of the crate, open the upper part.

2. Put the machine on a solid, flat and horizontal surface by two people. Keep at least 10 centimetres

distance from the wall to ensure no obstacle for protective cover or plugs.

3. Remove the plastic bag and printed materials.

4. Cut off the zip ties and take off the packing boxes inside the machine.

Unpack