Instruction Manual

Note: After completing the sample case, you will understand how smooth the machin-

ing process is when using the Carvera.

Errors

The device triggers an alarm when encountering an abnormal. Some alarms can be closed by unlock-

ing. Some require rebooting the machine.

General Steps

Different from the cumbersome operation process of general CNC, Carvera greatly simplifies the

machining process. The general operation steps are as follows:

1. Turn on the Carvera device and wait for the homing to end.

2. Fix the workpiece to the anchor point.

3. Place the tools.

4. Open the control software and connect to the device.

5. Upload and open the G-Code file.

6. Open the task setting box, set the working zero point and automatic detection rules.

7. Start and wait until the machining process ends.

Software