Instruction Manual

Manual Operation

1. Jogging control: Manually control the movement of the X/Y/Z axis and rotate the A axis at G0 fast

speed (3000mm/min by default). You can set movement distance. The

2. Status control: You can unlock, reboot or reset the device.

3. Automatic detection: Automatically scan the machining area; perform Z-axis probe or automatic

leveling. The difference between here and the task configuration is that you can just apply one-time

detection, without executing the G code file.

4. Move to the specified location: Provide a shortcut to quickly move to the specific location; includ-

ing anchor points 1, 2, working zero points, G-code starting point, and clearance point (the upper right

corner next to the machine zero points by default. You can quickly move the machine to there before

cleaning the working surface after machining process end).

5. XYZ Probe：Use the manual probe to do x/y/z axis probing. See detailed introductions in the next

chapter.

G-Code Preview

1. Graphical preview: Open the G code file to preview the G code graphics in the tool path preview

area. Green lines are G1/G2/G3 code, and red lines are fast moving G0 code.

2. Display control toolbar: You can pan (right mouse button), rotate (left mouse button), zoom in

(scroll wheel up), zoom out (scroll wheel down), and restore the preview (double-click) . You can also

select to show/hide the G-Codes for for different tools.

3. Playback toolbar: When the task is not running, you can play, fast forward, or backward the preview.

When the task is running, the preview graph shows the real-time machining trace.

Software