User Manual

Step 4
has been added to the receiver already.
Activate the sensor again to confirm the sensor
Step 5
total 35 optional melodies .
Press”Melody”button to choose the melody for this sensor.
Step 1
Plug the receiver into an outlet
Step 2
Press and hold both the “Volume” button and “Melody”
button for 10 seconds and release the
buttons when you hear a long beep prompt;
Note: all the sensors will be deleted by this operation.
(2)How to delete the sensors of the receiver
Step 6
Same steps to add more sensors to the plug-in receiver.
(For example: add the 2nd sensor to the receiver)
Press and hold the “Volume button” for 5 seconds
-----release the button when the Zone 2 flashing slowly
(zone 1 lights up meaning one sensor has been added
to zone 1 already)----activate the 2nd sensor once
----Zone 2 flashing quickly and a ring tone prompt
meaning the 2nd sensor has been added to the receiver.
Note please: the receiver has 4 zones and up to 4 sensors
can be added to 1 receiver.(the receiver will have a long
beep prompt if you operate to add more than 4 sensors
to 1 receiver)
Volume
Melody
9