Specification

Advanced Heating and Hot Water Systems
272 Duchaine Blvd. ∙ New Bedford, MA 02745 ∙ 508-763-8071∙ Fax: [phone]
Submittal Sheet for Everlast Light Duty Commercial Electric Water Heaters
JOB NAME:
LOCATION:
ARCH./ENGR.:
WHOLESALER:
MECH. CONTRACTOR:
MODEL NUMBER:
ELECTRICAL SPECIFICATIONS:
NOTES:
Light Duty Commercial Models
 Available in 80, 100, and 115 gallon capacities
 Standard Voltage and Phase: 240V, Single Phase,
Staged Operation
Construction
 316L Stainless Steel Tank construction tolerates high
temperatures and offers superior corrosion resistance
 Super-Insulated for minimal heat loss and energy
efficiency
 Top hot water outlet draws the hottest water from the
tank
 Outer jacket offers attractive stainless steel
appearance
 Water connections on the top of the water heater ease
installation
 Cold water connection with dip tube directs cold water
to the bottom of the tank, minimizing the mixing of
cold and heated water
 Hot and cold feed connections with built-in heat traps
provide great efficiency
 Electric Junction Box located on top of heater for easy
wiring and installation
Certifications and Ratings Efficiency
 Meets or exceeds ANSI requirements and have been
tested according to DOE procedures
 Meets or exceeds the energy efficiency requirements of
NAECA, ASHRAE standard 90, ICE code and all
state energy performance criteria
 Exceeds energy efficiency codes of all states, including
California Energy Commission (CEC)
 NSF listed for use in sanitary applications
Electric Elements / Thermostat
 Stainless Steel incoloy electric elements with a stainless
steel screw base – reduces the chance of element
burnout and provides longer service life versus
conventional elements
 Direct Immersion Elements allow maximum recovery
efficiency and direct, efficient heat transfer
 Adjustable surface mounted thermostat provides
years of reliable, trouble-free service at the desired
water temperature
 Factory Installed Wiring eliminates the need for
splicing and taping wires
 Fully automatic high limit controls provide adequate
temperature control and overheat protection – manual
reset cutoff
Safety and Construction
 ETL Design Certified to meet UL Standard 1453 for
Electric Booster and Commercial Storage Tank Water
Heaters
 North Carolina code compliant
 Lead Free Compliant, as required by the Safe
Drinking Water Act, Section 1417
Additional Features
 Extended Limited Warranty if registered online –
extends coverage on component parts and against
inner tank leakage from the date of installation
 Included ASME rated Temperature and Pressure
Relief Valve
 Included Brass Drain Valve
LP-563 Rev. 7.27.15