Use and Care Manual

Opening Your SpaOpening Your Spa
Easy and straightforward so you can Easy and straightforward so you can
invigorateinvigorate the body, while the body, while calmingcalming the the
mindmind
Nothing is more calming than soaking in a spa full
of warm, relaxing water. When your spa water is
crystal clear, you and your family and friends can feel
relaxed and rejuvenated. We promise to provide safe,
easy and effective sanitization technology so you can
enjoy your spa experience worry-free.
For both chlorine and bromine sanitization:For both chlorine and bromine sanitization:
Clean your spa.
• Remove any debris and scrub walls to
remove dirt and grime buildup.
• Use a surface cleaner to remove residue
from the sides of the spa.
If you use chlorine you should: If you use chlorine you should:
1
Balance: Test and adjust the total alkalinity,
calcium hardness and pH of the water (see
“Balanced Spa Care” on page 6 for specific
levels).
2
Sanitize: Broadcast HTH Spa
™
Chlorinating
Sanitizer
over the surface of circulating water.
Measure and adjust the free available
chlorine (FAC). For startup, do not
enter the spa until the FAC level is in
the range of 4 – 5 ppm. FAC levels
should be maintained in the range of
3 – 5 ppm.
4
www.hthpools.com
Eng_SpaGuide_wp.indd Sec1:4Eng_SpaGuide_wp.indd Sec1:4 5/22/09 2:34:07 PM5/22/09 2:34:07 PM