SDS

SAFETY DATA SHEET
HTH Calcium Hardness Increaser
REVISION DATE : 05/27/2015 Page 4 of 9
Air Release:
Vapors may be suppressed by the use of water fog.
Water Release:
This material is soluble in water. Notify all downstream users of
possible contamination. Divert water flow around spill if possible and
safe to do so.
Land Release:
Sweep up and place in suitable clean, dry containers for reclamation
or later disposal.
Additional Spill Information :
Remove all sources of ignition. Stop source of spill as soon as
possible and notify appropriate personnel. Utilize emergency
response personal protection equipment prior to the start of any
response. Evacuate all non-essential personnel. Dispose of spill
residues per guidelines under Section 13, Disposal Consideration.
SECTION 7. HANDLING AND STORAGE
Handling:
Do not take internally. Avoid contact with skin, eyes and clothing.
Upon contact with skin or eyes, wash off with water. Avoid breathing
dust from this material.
Storage:
Store in a cool, dry and well ventilated place. Material is
hygroscopic. Protect from moisture-laden air.
Incompatible Materials for Storage:
Refer to Section 10, "Incompatible Materials."
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Ventilation:
Local exhaust ventilation is recommended if significant dusting occurs.
Otherwise use general exhaust ventilation.
Protective Equipment for Routine Use of Product
Respiratory Protection :
Respiratory protection not normally needed. Wear a NIOSH approved
respirator if dusts are created.
Respirator Type :
Wear a NIOSH approved N95 respirator.
Skin Protection :
Wear impervious gloves to avoid skin contact. A safety shower should be
provided in the immediate work area.
Eye Protection:
Use chemical goggles. Emergency eyewash should be provided in the
immediate work area.
Protective Clothing Type:
Impervious
Components with workplace control parameters
no data available
SECTION 9. PHYSICAL AND CHEMICAL PROPERTIES
Physical State:
solid
Form
Flakes
Color:
White
Odor:
None