MSDS

MATERIAL SAFETY
DATA SHEET
HTH® PH PLUS
REVISION DATE : 09/16/2013 Page 4 of 10
6. ACCIDENTAL RELEASE MEASURES
Personal Protection for Emergency
Situations:
Use the personal protective equipment recommended in Section 8
and a NIOSH approved self-contained breathing apparatus.
Spill Mitigation Procedures
Air Release: Dusting from this product could occur. Contain all solids for
treatment or disposal.
Water Release: This material is soluble in water. Notify all downstream users of
possible contamination. Divert water flow around spill if possible and
safe to do so. Contain all solids for treatment or disposal.
Land Release: Sweep up and place in suitable clean, dry containers for reclamation
or later disposal. Do not place spill materials back in their original
containers. After removal, flush contaminated area thoroughly with
water. Contain all solids for treatment or disposal.
Additional Spill Information : Stop source of spill as soon as possible and notify appropriate
personnel. Utilize emergency response personal protection
equipment prior to the start of any response. Evacuate all non-
essential personnel. Dispose of spill residues per guidelines under
Section 13, Disposal Consideration.
7. HANDLING AND STORAGE
Handling: Do not take internally. Avoid contact with skin, eyes and clothing.
Upon contact with skin or eyes, wash off with water. Avoid breathing
dust from this material.
Storage: Store in a cool, dry place. Isolate from incompatible materials.
Incompatible Materials for Storage: Refer to Section 10, "Incompatible Materials."
8. EXPOSURE CONTROLS / PERSONAL PROTECTION
Ventilation: Local exhaust ventilation is recommended if significant dusting occurs.
Otherwise use general exhaust ventilation.
Protective Equipment for Routine Use of Product
Respiratory Protection : Respiratory protection not normally needed. If dusting occurs, wear a NIOSH
approved respirator.
Respirator Type : Wear a NIOSH approved N95 respirator.
Skin Protection : Wear impervious gloves to avoid skin contact. A safety shower should be
provided in the immediate work area.