SDS

SAFETY
DATA
SHEET
PHENOL RED SOLUTION
REVISION DATE : 5/21/2015 Page 3 of 7
SECTION 6. ACCIDENTAL RELEASE MEASURES
Personal Protection for Emergency
Situations:
Use the personal protective equipment recommended in Section 8
and a NIOSH approved self-contained breathing apparatus.
Spill Mitigation Procedures
Air Release:
Not applicable
Water Release:
This material is slightly soluble in water. Notify all downstream users
of possible contamination. Divert water flow around spill if possible
and safe to do so.
Land Release:
Absorb spill with inert material (e.g., dry sand, clay, earth or
commercial absorbent), then place in a chemical waste container.
Contain all liquids for treatment or disposal.
Additional Spill Information :
Stop source of spill as soon as possible and notify appropriate
personnel. Utilize emergency response personal protection
equipment prior to the start of any response. Evacuate all non-
essential personnel. Dispose of spill residues per guidelines under
Section 13, Disposal Consideration.
SECTION 7. HANDLING AND STORAGE
Handling:
Do not take internally. Avoid contact with skin, eyes and clothing by
wearing proper protective equipment. Upon contact with skin or
eyes, wash off with water. Avoid breathing mist or vapor.
Storage:
Store in a cool, dry and well ventilated place. Do not expose to
direct light.
Incompatible Materials for Storage:
Refer to Section 10, "Incompatible Materials."
SECTION 8. EXPOSURE CONTROLS/PERSONAL PROTECTION
Ventilation:
Local exhaust ventilation is recommended if vapors, mists or aerosols are
generated. Otherwise, use general exhaust ventilation.
Protective Equipment for Routine Use of Product
Respiratory Protection :
Respiratory protection not normally needed.
Skin Protection :
Wear impervious gloves to avoid skin contact.
Eye Protection:
Use safety glasses with side shields.
Protective Clothing Type:
Impervious
Components with workplace control parameters
no data available