Operation Manual

Getting Started 21
1.3 Starting Up
After inserting your SIM card and battery, you can now power on and start
using your device.
Turn your device on and off
To turn on the power
• Press and hold the POWER button for a few seconds.
When you turn on your device for the first time, a Quick Start Wizard
will guide you through the calibration process and the setup of
regional settings, date and time, and password. For more information
about touch screen calibration, see “Calibrate the device”.
To turn off the power
• Press and hold the POWER button for a few seconds.
A message will then be displayed, prompting you whether or not to
turn off the device completely.
Auto configure the data connection settings
The first time you power on your device, you will see a notification message
from the Connection Setup on the Today screen.
The Connection Setup can automatically configure your device’s data
connections, such as GPRS, WAP, and MMS, for you so that you do not need
to enter the settings manually onto your device.
To automatically configure data connection settings
1. When you see the notification message from the Connection Setup,
tap Yes.
Note If you do not see the notification message, tap on the title bar to
display the message.
2. If your SIM card supports multiple network operator profiles, a
message will appear with network profile choices. Select the profile
you want to use and tap OK.
3. Connection Setup then starts to configure your device’s data
connection settings.