Touch Phone User Manual www.htc.
Please Read Before Proceeding THE BATTERY IS NOT CHARGED WHEN YOU TAKE IT OUT OF THE BOX. DO NOT REMOVE THE BATTERY PACK WHEN THE DEVICE IS CHARGING. YOUR WARRANTY IS INVALIDATED IF YOU OPEN OR TAMPER WITH THE DEVICE’S OUTER CASING. PRIVACY RESTRICTIONS Some countries require full disclosure of recorded telephone conversations, and stipulate that you must inform the person with whom you are speaking that the conversation is being recorded.
Sprite Backup is a trademark or service mark of Sprite Software. All other company, product and service names mentioned herein are trademarks, registered trademarks or service marks of their respective owners. HTC shall not be liable for technical or editorial errors or omissions contained herein, nor for incidental or consequential damages resulting from furnishing this material. The information is provided “as is” without warranty of any kind and is subject to change without notice.
required, consult your authorized service provider or local power company. For a product that operates from battery power or other sources, refer to the operating instructions that are included with the product. • Handle battery packs carefully This product contains a Li-ion battery. There is a risk of fire and burns if the battery pack is handled improperly. Do not attempt to open or service the battery pack.
SAFETY IN AIRCRAFTS Due to the possible interference caused by this product to an aircraft’s navigation system and its communications network, using this device’s phone function on board an airplane is against the law in most countries. If you want to use this device when on board an aircraft, remember to turn off the phone by switching to Flight Mode.
INTERFERENCE WITH MEDICAL EQUIPMENT FUNCTIONS This product may cause medical equipment to malfunction. The use of this device is forbidden in most hospitals and medical clinics. If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.
General Precautions • Avoid applying excessive pressure to the device Do not put heavy objects or apply excessive pressure on the device to prevent damaging the device or distorting the touch screen display. Also avoid carrying the device inside your pocket for extensive lengths of time. • Heed service markings Except as explained elsewhere in the Operating or Service documentation, do not service any product yourself.
• Mounting accessories Do not use the product on an unstable table, cart, stand, tripod, or bracket. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer. • Avoid unstable mounting Do not place the product with an unstable base. • Use product with approved equipment This product should be used only with personal computers and options identified as suitable for use with your equipment.
Contents Chapter 1 Getting Started 13 1.1 Getting to Know Your Device and Accessories ..................................14 1.2 Installing the SIM Card, Battery, and Storage Card ..........................18 1.3 Starting Up ..........................................................................................21 1.4 The Today Screen.................................................................................24 1.5 The Start Menu ....................................................................
Chapter 4 Setting Up Your Device 63 4.1 Basic Settings ......................................................................................64 4.2 Personalizing the Today Screen .........................................................67 4.3 Protecting Your Device .......................................................................69 Chapter 5 Synchronizing Information With Your Computer 5.1 5.2 5.3 5.4 5.5 5.6 71 About Synchronization ...........................................................
Chapter 8 Working With Company E-mails and Meeting Appointments 8.1 8.2 8.3 8.4 Chapter 9 Working With Documents and Files 9.1 9.2 9.3 9.4 9.5 113 Synchronizing Your Device with the Exchange Server ...................114 Working With Company E-mails .......................................................115 Managing Meeting Requests ...........................................................119 Finding Contacts in the Company Directory ...................................
Chapter 12 Managing Your Device 12.1 12.2 12.3 12.4 12.5 12.6 179 Adding and Removing Programs ...................................................180 Using Task Manager.........................................................................180 Resetting Your Device......................................................................182 Managing Memory ..........................................................................183 Windows Update .........................................................
Chapter 1 Getting Started 1.1 Getting to Know Your Device and Accessories 1.2 Installing the SIM Card, Battery, and Storage Card 1.3 Starting Up 1.4 The Today Screen 1.5 The Start Menu 1.6 Quick Menu 1.7 HTC Home 1.8 TouchFLO™ 1.9 Status Icons 1.10 Programs 1.
Getting Started 1.1 Getting to Know Your Device and Accessories Top panel POWER Press to turn off the display temporarily. To turn off the power, press and hold for about 5 seconds. For more information, see “Starting Up” in this chapter. Left panel Volume Slider • Slide up or down to adjust the speaker volume. • During a call, slide up or down to adjust the earpiece volume. Right panel Stylus CAMERA Press to launch the Camera. See Chapter 11 for details.
Getting Started 15 Front panel Notification LEDs * See description below. Earpiece Listen to a phone call from here. Touch Screen TALK Press to answer an incoming call or dial a number. END Press to end a call or to return to the Today screen. NAVIGATION Control/ENTER Press this multi-directional control up, down, left, or right to move through menus and program instructions; carry out the selection by pressing the center button.
Getting Started Back panel Speaker EG AP IXELS CA M ER A Self-portrait Mirror • Use it when taking selfportrait shots. 2.0 M 2 Megapixel Camera See Chapter 11 for details. Back Cover Slide the back cover upward to remove it. Bottom panel Microphone RESET With the stylus, press the RESET button to soft-reset your device. Sync Connector/Earphone Jack Connect the supplied USB cable to synchronize information or plug in the AC adapter to recharge the battery.
Getting Started 17 Accessories 1 3 2 4 5 No. Accessory Function 1 AC adapter Recharges the battery. 2 USB Sync cable Connects your device to a PC and synchronizes data. 3 Stereo headset Provides a volume control slider and a Send/End button. Press the Send/End button to pick up a call or put a call on hold; press and hold the button to end the call. 4 Pouch Acts as a protective carrying case for your device. 5 microSD™ card Provides 1 GB of storage space.
Getting Started 1.2 Installing the SIM Card, Battery, and Storage Card Always turn off your device before installing or removing the SIM card or battery. The SIM card contains your phone number, service details, and phonebook/ message memory. Your device supports both 1.8V and 3V SIM cards. Some legacy SIM cards will not function with your device. You should consult with your service provider for a replacement SIM card. There may be fees for this service.
Getting Started 19 To remove the back cover Before installing the SIM card, battery, or storage card, you have to remove the back cover. 1. Make sure your device is turned off. 2. Slide the back cover upward as shown in the following illustration. To install the SIM card and microSD card 1. Use your thumb or finger to pry open the cover that houses the SIM and storage card slots. To open the slot cover easier, pry it open from both ends. 2. Flip your device so that the touch screen faces upward. 3.
Getting Started 4. The lower slot is the SIM card slot. Insert the SIM card with its gold contacts facing down and its cut-off corner facing toward the inside of the slot. 5. The upper slot is the storage card slot. Insert the microSD card into the storage card slot with the gold contacts facing down. 6. Close the slot cover. Note To remove the SIM card or storage card, press the card to pop it out of the slot. To install the battery 1.
Getting Started 21 1.3 Starting Up After inserting your SIM card and battery, you can now power on and start using your device. Turn your device on and off To turn on the power • Press and hold the POWER button for a few seconds. When you turn on your device for the first time, a Quick Start Wizard will guide you through the calibration process and the setup of regional settings, date and time, and password. For more information about touch screen calibration, see “Calibrate the device”.
Getting Started 4. After the Connection Setup completes the configuration, tap Restart. For more information about the Connection Setup, see Chapter 10. Charge the battery New batteries are shipped partially charged. Before you start using your device, it is recommended that you charge the battery. Some batteries perform best after several full charge/discharge cycles. You can charge the battery in two ways: • Charging the device’s battery by connecting the power adapter.
Getting Started 23 Manage screen settings The device’s display has the following orientation modes: Portrait and Landscape. To change the orientation, tap Start > Settings > System tab > Screen, and select the orientation you want. Tip To quickly change the screen orientation, you can also tap the Rotate Screen icon in HTC Home’s Launcher. See “HTC Home” later in this chapter for details. To smooth the edges of screen fonts for many programs, on the ClearType tab, select the Enable ClearType check box.
Getting Started 1.4 The Today Screen The Today screen displays important information, such as upcoming appointments and status indicators. You can touch or tap a section on the screen to open the associated program. Connection status Notification Open Start Menu Signal strength Adjust volume Battery status HTC Home (See “HTC Home” in this chapter for details) Open Quick Menu (See “Quick Menu” in this chapter for details) Your upcoming appointments • To access the Today screen, tap Start > Today.
Getting Started 25 1.5 The Start Menu The Start menu, located at the top left corner of the Today screen, displays a list of programs. You can start a program by scrolling through the programs list and then pressing ENTER, or by tapping a program with the stylus. Switch to the Today screen. Open a program. (The items displayed in the Start menu can be customized by tapping Start > Settings > Personal tab > Menus). Open a recently-used program. Access more programs. View and change settings.
Getting Started 1.7 HTC Home HTC Home is a Today screen plug-in that gives you up-to-date local information at a glance, such as time, day and weather information, and shows new messages and missed calls. It also has a customizable launcher where you can add your favorite applications for one-touch access. HTC Home has three components: Home, Weather and Launcher. At the bottom of HTC Home, there is a toolbar that allows you to switch between these components.
Getting Started 27 Time display. Touch this display area when you want to change the date or time, or to enable the alarm. Current day and date Alarm icon Number of missed calls. Touch this icon to view the Call History. Number of new e-mails. Touch this icon to view your e-mails. Number of new SMS/MMS messages. Touch this icon to view your SMS and MMS messages. Weather Weather shows you the current weather as well as weather information of the next four days of the week.
Getting Started To view weather information After selecting your city, your device automatically connects to the Internet via GPRS and downloads weather information of the current day and the next four days of the week. The current temperature, the highest and lowest temperatures, and a visual indicator of the climate (showing if it’s a cloudy or rainy day, etc.) will be displayed in the Weather tab. Shows the time or days that have passed since the last download of weather information.
Getting Started 29 from the AccuWeather Web site whenever you select the Weather tab, if the data has not been updated within the last three hours. Weather data will also be downloaded every time an ActiveSync connection occurs (through over-the-air or USB connection). Clear this check box if you prefer to manually download weather information. Tip • Download when roaming. Select this check box only if want to allow automatic download of weather data when you’re roaming. This may incur additional costs.
Getting Started Touch a shortcut to remove it. Return Note To replace a shortcut, you need to delete it first and then add a shortcut to your favorite program or setting. 1.8 TouchFLO™ TouchFLO™ is a special feature that gives you better touch panel experience on your device. With TouchFLO, you can simply use your finger to scroll and pan the screen. TouchFLO also features the Touch Cube where you can launch messaging programs, Internet Explorer® Mobile, and more.
Getting Started 31 To close the Touch Cube • To close the Touch Cube and return to the screen prior to opening the Touch Cube, slide your finger downward on the touch screen. To navigate the Touch Cube The Touch Cube is a three-dimensional, cubic user interface. To flip the interface from one side to another, slide your finger left or right on the touch screen.
Getting Started Note You should already have contacts created or synchronized on your device before you can add them as favorite contacts. SIM contacts cannot be added as favorite contacts. For more information about creating contacts, see Chapter 6. For more information about synchronizing your device with the PC, see Chapter 5. For information about synchronizing your device with the Exchange Server, see Chapter 8. Select a contact to access the contact card and make a phone call or send messages.
Getting Started 33 • The second side of the interface provides quick shortcuts to your e-mail messages, text and MMS messages, the Internet, and other applications. Simply touch the icons on the screen to open the corresponding program. • On the third side of the interface, you can play back music and access the images and video files on your device. Touch this icon to open Audio Manager and play back music files (For more information about using Audio Manager, see Chapter 11.
Getting Started Finger scrolling and finger panning With TouchFLO, you can use finger scrolling and finger panning when viewing content that cannot be fit entirely on the screen, such as Web pages, documents, and messages. Finger scrolling can also be used to scroll up and down lists such as the contacts list, file list, message list, calendar appointments list, and more. Note Finger scrolling and panning works in both portrait and landscape modes.
Getting Started 35 • To pan towards the right, touch and hold on the touch screen then drag your finger to the left. • To pan towards the left, touch and hold on the touch screen then drag your finger to the right. • You can also pan diagonally. Note Scrollbars shown on the screen indicate that there are more content that cannot be fit on the screen. You can use finger panning only when there are scrollbars shown on the screen. To continuously pan 1. Drag your finger towards the boundary and hold.
Getting Started 1.9 Status Icons The following are some of the status icons that you may see on the device. Icons that appear in this area Icons that appear in this area Connection Setup GPRS available There are more notifications. Tap the icon to view all New text messages; SMS notification of voice mail.
Getting Started 37 Icons that appear in this area Battery charging Battery full Battery very low Icons that appear in this area GPRS connecting GPRS in use EDGE connecting EDGE in use Maximum signal strength No signal Phone is turned off No phone service.
Getting Started 1.10 Programs The following are programs that are preinstalled on your device. Programs in the Start Menu Icon Description Office Mobile Use the complete suite of Microsoft® Office applications for your mobile device. Excel Mobile Create new workbooks or view and edit Microsoft® Office Excel® workbooks. PowerPoint Mobile View Microsoft® Office PowerPoint® slides and presentations. Word Mobile Create, view, and edit Microsoft® Office Word documents.
Getting Started 39 Icon Description Audio Manager Browse and play back music files. Bluetooth Explorer Search for other Bluetooth devices that have file sharing enabled and access their Bluetooth shared folder. Calculator Perform basic arithmetic and calculations, such as addition, subtraction, multiplication, and division. Camera Take photos or shoots video clips with accompanying audio.
Getting Started Icon Description Sprite Backup You will find this program in the Application CD. You can install and use this program to back up your data and files. See Chapter 9 for details. STK (SIM Tool Kit) Service Access information and other services offered by your wireless service provider. Streaming Media Stream live or on-demand video. Tasks Keep track of your tasks. Voice Recorder Record your voice, play it back, then send it via e-mail, MMS or beaming.
Getting Started 41 Icon Description Lock Set a password for your device. Menus Set what programs will appear in the Start menu. Owner Information Enter your personal information on your device. Phone Customize phone settings such as ring tone, set a PIN number for your SIM card, and more. Sounds & Notifications Enable sounds for events, notifications, and more, and set the type of notification for different events. Today Customize the appearance and the information to be displayed on the Today screen.
Getting Started Icon Description Encryption Allow files on your storage card to be encrypted. Encrypted files will be readable only on your device. Error Reporting Enable or disable the device's error reporting function. When this function is enabled and a program error occurs, technical data about the state of the program and your computer will be logged in a text file and delivered to Microsoft's technical support if you choose to send it.
Getting Started 43 Connections tab Icon Description Beam Set your device to receive incoming Bluetooth beams. Bluetooth Turn Bluetooth on, set your device to visible mode, and scan for other Bluetooth devices. Comm Manager Manage your device’s connections (including Wi-Fi, GPRS, Bluetooth, and ActiveSync), turn the phone on or off, switch to ringer/vibration mode, enable or disable the Direct Push function, and more.
Getting Started
Chapter 2 Entering and Searching Information 2.1 Entering Information 2.2 Using the On-screen Keyboard 2.3 Using Letter Recognizer 2.4 Using Block Recognizer 2.5 Using Transcriber 2.6 Using Symbol Pad 2.
Entering and Searching Information 2.1 Entering Information When you start a program or select a field that requires text or numbers, the Input Panel icon becomes available on the menu bar. Tap the Input Selector arrow (that appears next to the Input Panel icon) to open a menu where you can select a text input method and customize input options. After selecting a text input method, the corresponding Input Panel is then displayed and you can use it to enter text.
Entering and Searching Information 47 2.2 Using the On-screen Keyboard The on-screen Keyboard is available when text entry is possible. You can enter text by tapping keys on the keyboard that are displayed on the screen. To enter text using the on-screen Keyboard 1. In a program, tap the Input Selector arrow, and tap Keyboard. 2. Enter text by tapping keys on the on-screen Keyboard. To enlarge the on-screen Keyboard 1. Tap the Input Selector arrow, then tap Options. 2.
Entering and Searching Information 2.4 Using Block Recognizer With Block Recognizer, you use a single stroke to write letters, numbers, symbols, and punctuation, which are then converted into typed text. To use Block Recognizer 1. From a program, tap the Input Selector arrow, and tap Block Recognizer. 2. Write characters, numbers, and symbols in the designated writing area. • Enter letters by writing in the abc (left) area of the box. • Enter numbers by writing in the 123 (right) area of the box.
Entering and Searching Information 49 The keyboard remains visible until you tap the button again. Tips • To reposition the keyboard, tap and hold the title bar, then drag to the desired location. • When no text is selected, you can also open the keyboard by doing the gesture. For more information about using Transcriber gestures, see Help on your device. To edit text 1. In a program, draw a line across the text you want to edit. 2.
Entering and Searching Information To open the Symbol Pad and select a symbol 1. Create or open a document, such as a Word document. 2. To open the Symbol Pad, tap the Input Selector arrow, then tap Symbol Pad. 3. To browse through the pages of symbols, tap Symbol Pad screen. / on the 4. Tap a symbol to select it and close the Symbol Pad. The selected symbol will then be inserted in your document. 2.
Chapter 3 Using Phone Features 3.1 Using the Phone 3.2 Making a Call 3.3 Receiving a Call 3.4 Smart Dialing 3.5 Additional Dialing Information 3.
Using Phone Features 3.1 Using the Phone Like a standard mobile phone, you can use your device to make, receive, and keep track of calls and send messages. You can also dial directly from Contacts, and easily copy phonebook entries from your SIM card to Contacts on your device. The Phone screen From the Phone screen, you can access Call History, Speed Dial, and Phone settings. To open the Phone screen, do one of the following: • Tap Start > Phone; or • Press the TALK button.
Using Phone Features 53 To resume call function • Turn on the phone function by tapping the Phone button again on the Comm Manager screen. The icon indicates the phone function is turned on. Flight mode Another way to turn off the phone function is to switch your device to Flight mode. To enable Flight mode When you enable Flight mode, it turns off all wireless radios on your device, which include the phone function, Bluetooth, and Wi-Fi. 1.
Using Phone Features Notes • To adjust the conversation phone volume, you must do it during a call. Adjusting the volume at another time will affect the ring, notification, and MP3 sound levels. • When you activate Vibrate mode, sound will automatically be muted and your device will vibrate when an incoming call is received. The Vibrate icon ( ) will appear in the title bar to indicate that Vibrate mode is activated. 3.
Using Phone Features 55 To choose one of the numbers of a contact to dial By default, the mobile phone number (m) of a contact is dialed when you make a call from Contacts. However, you can specify that a different phone number is dialed instead. 1. Tap Start > Contacts. 2. Press NAVIGATION up or down to select the contact. 3. Press NAVIGATION left or right. The letters representing the number will change as you scroll through them.
Using Phone Features Make a call from Call History 1. On the Phone screen, tap the Call History button ( tap Menu > Call History. ) or 2. You can either finger-scroll through all calls in Call History, or tap Menu > Filter and select from a category of call types. 3. Finger-scroll to the desired contact or phone number, and tap Call. One-touch Speed Dial Use Speed Dial to call frequently-used numbers with a single tap.
Using Phone Features 57 Make a call from SIM Manager SIM Manager allows you to view the contents of your SIM card, transfer SIM phonebook entries to Contacts on your device, and make a call from your SIM card. To call a SIM contact 1. Tap Start > Programs > SIM Manager. Wait for your SIM card contents to load. 2. Tap and hold the name or phone number of the person you want to call, and tap Call. For more information about SIM Manager, see Chapter 6. 3.
Using Phone Features To put a call on hold Your device notifies you when you have another incoming call, and gives you the choice of rejecting or accepting the call. If you are already on a call and accept the new call, you can choose to switch between the two callers, or set up a conference call between all three parties. 1. Tap Answer to take the second call, and put the first one on hold. 2. To end the second call and return to the first call, tap End or press END on the device.
Using Phone Features 59 3.4 Smart Dialing Smart Dialing makes it easy for you to dial a phone number. When you start entering a phone number or contact name, Smart Dialing will automatically search and sort the contact entries on the SIM card, in Contacts, and the phone numbers in Call History (including incoming, outgoing, and missed calls). You can then select the desired number or contact from the filtered list to dial.
Using Phone Features down to the following names: “Ben Miller”, “George Adams”, “Carter, Ellen”, “Dixon, Allan”. Make a call or send a text message using Smart Dialing 1. Press the TALK button on your device to open the Phone screen. 2. Begin entering the first few numbers or characters. When you start entering a number or letter, the Smart Dialing panel will display matches found. 3.
Using Phone Features 61 Tip To view or edit information associated with the selected contact, tap the contact’s name on the shortcut menu (applies only to entries stored in Contacts on your device). Set up Smart Dialing 1. On the Phone screen, tap Menu > Smart Dialing Options. 2. On the Options tab, select the Enable Smart Dialing check box.
Using Phone Features 3.6 Setting Up Bluetooth SIM Access for Car Kit Phones Bluetooth car kits that support the SIM Access Profile (SAP) can connect to your device and access its SIM card via Bluetooth. Once a SAP connection has been established, you can download SIM contacts from your device to the car kit phone. You can also use the car kit phone to answer and make calls using your device’s SIM card.
Chapter 4 Setting Up Your Device 4.1 Basic Settings 4.2 Personalizing the Today Screen 4.
Setting Up Your Device 4.1 Basic Settings Time and date To set the time and date 1. Tap Start > Settings > System tab > Clock & Alarms > Time tab. 2. Select the correct time zone and change the date or time. Note During synchronization, the time on your device is updated with the time on your PC. To set the time and date for a different location If you visit or communicate with someone in a particular time zone often, you can select it as your visiting time zone. 1.
Setting Up Your Device 65 To set the backlight to dim after a time delay 1. Tap Start > Settings > System tab > Backlight. 2. Tap the Battery power tab, or the External power tab. 3. Select the Turn off backlight if device is not used for check box, and specify the time delay. To increase or decrease the size of text on the screen 1. Tap Start > Settings > System tab > Screen > Text Size tab. 2. Move the slider to increase or decrease the text size.
Setting Up Your Device Tip You can use *.wav, *.mid, *.mp3, *.wma, or other types of sound files that you downloaded from the Internet or copied from your PC as ring tones. For a complete list of supported audio file formats for ring tones, see "Specifications" in the Appendix. To use your sound files as ring tones, copy them first to the /Windows/Rings folder on your device, then select the sound from the Ring tone list of your device. For more information about copying files, see Chapter 9.
Setting Up Your Device 67 Phone services Your device can directly link to the mobile phone network, and allow you to access and change the settings of various phone services for your device. Phone services may include Call Forwarding, Call Waiting, Voicemail, and more. Contact your wireless service provider to find out about the availability of phone services for your device. To access and change settings of phone services 1. Tap Start > Settings > Personal tab > Phone > Services tab. 2.
Setting Up Your Device To display owner information Having owner information displayed on the Today screen makes it easier for someone to return your device to you if it is lost. 1. Tap Start > Settings > Personal tab > Owner Information. 2. On the Identification tab, enter your personal information. Tips • If you don’t see owner information on the Today screen, tap Start > Settings > Personal tab > Today. On the Items tab, select the Owner Info check box.
Setting Up Your Device 69 4. Do any of the following: • Under Display number of, select the type of tasks you want to appear on the Today screen. • In the Category list, select whether to display only tasks assigned to a specific category or to display all tasks. For more information about creating tasks on your device, see Chapter 6. Customize the Start menu You can choose which items appear in the Start menu. 1. Tap Start > Settings > Personal tab > Menus. 2.
Setting Up Your Device Protect your device with a password You can help keep your data more secure by requiring a password every time the device is turned on. To set a device password 1. Tap Start > Settings > Personal tab > Lock. 2. Select the Prompt if device unused for check box, and in the box to the right, select how long your device must be idle before a password is required. 3. In the Password type box, select the type of password you would like to use.
Chapter 5 Synchronizing Information With Your Computer 5.1 About Synchronization 5.2 Setting Up Windows Mobile® Device Center on Windows Vista™ 5.3 Setting Up ActiveSync® on Windows XP® 5.4 Synchronizing With Your Computer 5.5 Synchronizing via Bluetooth 5.
Synchronizing Information With Your Computer 5.1 About Synchronization You can take information from your computer wherever you go by synchronizing them to your device.
Synchronizing Information With Your Computer 73 5.2 Setting Up Windows Mobile® Device Center on Windows Vista™ Microsoft Windows Mobile® Device Center is the replacement for Microsoft® ActiveSync® on Windows Vista™. Note Some versions of Windows Vista come with Windows Mobile Device Center already installed. If Windows Mobile Device Center is not available on your Windows Vista, you can install it from the Getting Started Disc that came with your device.
Synchronizing Information With Your Computer 4. Select the items you want to synchronize, then click Next. 5. Enter a device name and click Set Up. When you finish the setup wizard, Windows Mobile Device Center synchronizes your device automatically. Notice that Outlook e-mails and other information will appear on your device after synchronization.
Synchronizing Information With Your Computer 75 5.3 Setting Up ActiveSync® on Windows XP® The Getting Started Disc that comes with your device contains Microsoft ActiveSync 4.5 or later. Follow the steps in this section to install and set up ActiveSync on Windows XP or other compatible Windows systems. Note For a list of compatible Windows systems, please go to http://www.microsoft.com/windowsmobile/activesync/activesync45.mspx. Install ActiveSync 1.
Synchronizing Information With Your Computer 5.4 Synchronizing With Your Computer Connect and synchronize your device with your PC using the USB cable or Bluetooth connection. Start and stop synchronization You can manually synchronize either from your device or PC. From your device • Tap Start > Programs > ActiveSync., then tap Sync. To end synchronization before it completes, tap Stop. Tip To delete a partnership with one PC completely, disconnect your device from that PC first.
Synchronizing Information With Your Computer 77 the same information type elsewhere in the list. 3. To change synchronization settings for an information type, for instance, E-mail, select it and tap Settings. You can then set the download size limit, specify the time period of information to download, and more. Notes • Some information types such as Favorites, Files and Media cannot be selected in ActiveSync Options on your device.
Synchronizing Information With Your Computer 3. Make sure that Bluetooth on both your device and the computer are turned on and set to visible mode. For more information, see “Bluetooth” in Chapter 10. 4. Tap Menu > Connect via Bluetooth. Make sure the Bluetooth function of both your device and the computer are turned on and set to visible mode. 5.
Chapter 6 Organizing Contacts, Appointments, Tasks, and Other Information 6.1 Contacts 6.2 SIM Manager 6.3 Calendar 6.4 Tasks 6.5 Notes 6.
Organizing Contacts, Appointments, Tasks, and Other Information 6.1 Contacts Contacts is your address book and information storage for the people and businesses you communicate with. You can create the following types of contacts on your device: There are three types of contacts that you can create on your device: • Outlook contacts. Contacts that are stored on your device, which can be created on your device or synchronized with your PC or the Exchange Server. • SIM contacts.
Organizing Contacts, Appointments, Tasks, and Other Information 81 4. To add a photo of the contact, tap Select a picture, then select the picture file or tap Camera to take a photo of the contact. This photo appears on the Phone screen when you receive a call from the contact. 5. To assign a ring tone to the contact, tap the Ring tone field, scroll through the list of tones, then select a desired tone. 6. When finished, tap OK.
Organizing Contacts, Appointments, Tasks, and Other Information 3. Touch the name of a contact to open his or her contact card. 4. On the contact card, you will see the last outgoing or incoming call as well as detailed information such as phone numbers of the contact, e-mail address, and more. To group similar contacts You can group similar contacts for easier management by assigning them to categories. 1. Create a new Outlook contact or edit an existing Outlook contact. 2. Tap Categories. 3.
Organizing Contacts, Appointments, Tasks, and Other Information 83 Share contact information To beam a contact’s details You can quickly send contact information to another mobile phone or device through Bluetooth beaming. 1. Tap Start > Contacts, then select a contact. 2. Tap Menu > Send Contact > Beam then select a device where to beam the contact to. Note Before you can beam, make sure Bluetooth is turned on and set to visible mode on your device and the target mobile device.
Organizing Contacts, Appointments, Tasks, and Other Information 6.2 SIM Manager SIM Manager allows you to view the contents of your SIM card, transfer contacts from your SIM card to your device or vice versa, and make a call to a SIM contact. To create a contact on your SIM card 1. Tap Start > Programs > SIM Manager. 2. Tap New and enter a contact name and phone number. 3. Tap Save to save the information on your SIM card.
Organizing Contacts, Appointments, Tasks, and Other Information 85 3. Under the Mark column, you can change the indicator that will be appended to the SIM contact names for each phone number type. To do so, select a phone type, tap Edit, enter your desired indicator, then tap Save. 4. After modifying, tap OK. 5. Tap Menu > Contacts to SIM. 6. Select the check boxes of the contact’s phone numbers that you want to copy to your SIM card, then tap Save. To store your SIM card’s phone number 1.
Organizing Contacts, Appointments, Tasks, and Other Information 6.3 Calendar Use Calendar to create appointments, including meetings and other events. You can also synchronize Calendar appointments between your device and PC. Create appointments To schedule an appointment 1. Tap Start > Calendar. 2. Tap Menu > New Appointment. 3. Enter a name for the appointment. 4. Do one of the following: • If it is a special occasion such as a birthday or a whole-day event, set the All Day option to Yes.
Organizing Contacts, Appointments, Tasks, and Other Information 87 4. Set the time when you want the reminder to alert you. 5. Tap OK to return to the calendar. View appointments By default, Calendar displays appointments in Agenda view. You can also look at your appointments in Day, Week, Month, and Year views. The highlighted hours here indicate the time of your appointments. Indicates that there is a conflict with another appointment. Tap to view appointment details. Tap to switch views.
Organizing Contacts, Appointments, Tasks, and Other Information Send appointments To send a meeting request Use Calendar to schedule meetings via e-mail with contacts who use Outlook or Outlook Mobile. 1. Tap Start > Calendar. 2. Schedule a new appointment, or open an existing one and tap Edit. 3. Tap Attendees, then tap Add Required Attendee or Add Optional Attendee and add the contacts whom you want to invite.
Organizing Contacts, Appointments, Tasks, and Other Information 89 6.4 Tasks Use Tasks to keep track of things you need to do. A task can occur once or repeatedly (recurring). You can set reminders for your tasks and you can organize them using categories. Your tasks are displayed in a task list. Overdue tasks are displayed in red. To create a task 1. Tap Start > Programs > Tasks. 2. Tap Menu > New Task, enter a subject for the task, and fill in information such as start and due dates, priority, and so on.
Organizing Contacts, Appointments, Tasks, and Other Information To set a default reminder for all new tasks 1. Tap Start > Programs > Tasks. 2. Tap Menu > Options. 3. Select the Set reminders for new items check box. 4. Tap OK to return to the task list. Note The new tasks must have due dates set in order for the reminder to take effect. To show start and due dates in the task list 1. Tap Start > Programs > Tasks. 2. Tap Menu > Options. 3. Select the Show start and due dates check box. 4. Tap OK.
Organizing Contacts, Appointments, Tasks, and Other Information 91 6.5 Notes Using Notes, you can create handwritten and typed notes, record voice notes, convert handwritten notes to text for easy readability, and more. To create a note 1. Tap Start > Programs > Notes. In the note list, tap New. 2. Tap the Input Selector arrow next to the Input Method icon on the menu bar, tap the input method you want, and enter your text. 3. If the Input Selector arrow is not displayed, tap the Input Method icon. 4.
Organizing Contacts, Appointments, Tasks, and Other Information To record a voice note You can create a stand-alone recording (voice note) or you can add a recording to a note. 1. Tap Start > Programs > Notes. 2. Do one of the following: • To create a stand-alone recording, record from the note list. • To add a recording to a note, create or open a note. 3. If you do not see the Recording toolbar, tap Menu > View Recording Toolbar. 4. Tap the Record icon ( ) to begin recording your voice.
Organizing Contacts, Appointments, Tasks, and Other Information 93 6.6 Voice Recorder Voice Recorder lets you record your voice and then quickly send it in an MMS or e-mail, beam it, or set the recorded voice as your ringtone. Note Voice Recorder saves voice recordings in AMR-NB (Adaptive Multi-Rate Narrowband) format only. This is a common speech audio format used in mobile devices. To record your voice 1. Tap Start > Programs > Voice Recorder. 2. Hold the device’s microphone near your mouth. 3.
Organizing Contacts, Appointments, Tasks, and Other Information To beam the voice recording 1. Select the voice recording(s) you want to beam then tap Menu > Beam File. 2. Tap the device you want to send the voice recording(s) to. 3. On the other device, accept the file transfer to receive the file. To set the voice recording as a ring tone • Select the desired voice recording the tap Menu > Set as Ringtone. To rename or move a recording 1. Select a voice recording then tap Menu > Rename/Move. 2.
Chapter 7 Exchanging Messages 7.1 Messaging 7.2 Text Messages 7.3 MMS 7.4 Types of E-mail Accounts 7.5 E-mail Setup Wizard 7.
Exchanging Messages 7.1 Messaging Messaging is where your text messages (SMS), multimedia messages (MMS), and e-mails are located. When you receive new messages, you can open them from the Today screen. Simply tap the type of message that you want to open. New e-mail messages New SMS and MMS messages To select a messaging account Do one of the following: • Tap Start > Messaging. The Account Picker screen then appears where you can select an account.
Exchanging Messages 97 To automatically add a signature in outgoing messages You can automatically add your name and other information as your signature in outgoing SMS, MMS and e-mail messages by following these steps: Tip You need to specify your signature for each type of messaging accounts. 1. Tap Start > Messaging, then tap Menu > Options. 2. Tap Signatures. 3. Select a type of messaging account in which to add a signature. 4.
Exchanging Messages d. The contact card of your selected contact is then displayed. Touch the item that shows Send text message. Select from Contacts: a. Tap Start > Contacts. b. Slide your finger upward on the touch screen to scroll down the contact list. See “Finger scrolling and finger panning” in Chapter 1 for more details on finger scrolling. c. Touch the contact’s name to open his or her contact card. d. On the contact card, touch the item that shows Send text message. 2.
Exchanging Messages 99 Tips • To enter symbols, tap Shift using the on-screen keyboard then tap a symbol, or use the Symbol Pad. For more information about entering text and symbols, see Chapter 2. • If you want to know when a text message is received, before sending the message that you are composing, tap Menu > Message Options then select the Request message delivery notification check box.
Exchanging Messages To configure MMS message settings 1. Tap Start > Messaging > SMS \ MMS. 2. Tap Menu > New > MMS. 3. Tap Menu > Options > Message Options. The Settings screen then appears. 4. In the Preferences tab, select or clear the provided check boxes according to your needs. 5. Tap the Servers tab and check if your device is preset with MMS server settings.
Exchanging Messages 101 • If you add several MMS message service providers to the Settings screen, you can choose one as your default provider. Select the provider's name in the list then tap Set As Default. Create and send MMS messages You can compose MMS messages in a combination of slides, where each slide can consist of a photo, video or audio clip, and/or text. To compose an MMS message 1. Tap Start > Messaging > SMS \ MMS, then tap Menu > New > MMS. 2.
Exchanging Messages To add text to an MMS message When you tap Insert text here on your MMS message, an empty screen appears where you can enter your text.
Exchanging Messages 103 View and reply MMS messages To view an MMS message • Use the playback controls • , , and . Tap Contents to see a list of files included in the message. On the Message Contents screen, you can do the following: • To save a file, select it, and tap Menu > Save. • To save the contents of a text file to the My Text list, tap Menu > Save into My Text. • To associate a photo to one of your contacts, tap Menu > Assign to Contact.
Exchanging Messages 7.4 Types of E-mail Accounts You can set up the following types of e-mail accounts on your device: • Outlook e-mail that you sync with your PC or the Exchange Server. • E-mail account that you have from an Internet Service Provider (ISP). • Web-based e-mail accounts such as Yahoo!® Mail, AOL®, etc. • Work account that you access using a VPN connection. 7.5 E-mail Setup Wizard Windows Mobile’s E-mail Setup Wizard lets you easily set up your personal and work e-mail accounts.
Exchanging Messages 105 work account that you access using a VPN server connection as a POP3/ IMAP4 account. 1. Tap Start > Messaging > New E-mail Account. 2. Enter your e-mail address, and select the Try to get e-mail settings automatically from the Internet check box. By selecting the option, the device attempts to download e-mail server settings so that you do not need to enter them manually. Tap Next. 3. After Auto Setup finishes, tap Next.
Exchanging Messages password for sending e-mail check box. You will prompted to enter these information. • Tap Advanced Server Settings, then select the Require SSL check boxes if your e-mail provider uses an SSL connection for more secured e-mail. From the Network connection list, select the data connection that you use for connecting to the Internet.
Exchanging Messages 107 7.6 Using E-mail After setting up e-mail accounts on your device, you can start sending and receiving e-mail messages. Create and send messages To compose and send a message 1. You can select a contact either from TouchFLO’s Touch Cube or from Contacts. Select a favorite contact from TouchFLO’s Touch Cube: a. Open the Touch Cube by sliding your finger upward, starting from the bottom of the touch screen where it shows a logo image. (See Chapter 1 for detailed instructions.) b.
Exchanging Messages c. Touch the contact’s name to open his or her contact card. d. On the contact card, touch the item that shows Send e-mail. 2. If you have several e-mail accounts, the Account Picker screen will appear. Select an e-mail account that you want to use. 3. A new e-mail message is then created. To add more recipients, enter their e-mail addresses, separating them with a semicolon. You can also tap To if you want to add e-mail addresses stored in Contacts. 4.
Exchanging Messages 109 For example, tapping “S”, then “A” narrows the list to only the e-mails that contain sender names and email subjects that start with “SA.” View and reply to messages To read an incoming message By default, only the first few kilobytes of a message are shown when you open an incoming message. To read the whole message: • Finger-scroll to the end of the message and tap Get the rest of this message; or • Tap Menu > Download Message.
Exchanging Messages • If your company is running Microsoft Exchange Server 2007, the attachment downloads immediately, without waiting until the next time you synchronize. For more information about working with company e-mails, see Chapter 8. To reply to or forward a message 1. Open the message and tap Menu > Reply, Menu > Reply All, or Menu > Forward. 2. Enter your response then tap Send.
Exchanging Messages 111 Download messages The manner in which you download messages depends on the type of e-mail account you have. To send and receive e-mail for an Outlook account 1. Tap Start > Programs > ActiveSync. 2. Connect your device to your PC using the USB cable or Bluetooth. Otherwise, connect wirelessly if you are synchronizing Outlook e-mail with the Exchange Server. For more information, see Chapter 8. 3.
Exchanging Messages To change the download size and format for POP3/IMAP4 e-mail 1. Tap Menu > Options on the Account Picker screen, or tap Menu > Tools > Options while you’re in a message list. 2. Tap your e-mail account. 3. Keep tapping Next until you see Message format and Message download limit on the screen. 4. Under Message format, select HTML or Plain text. 5. Under Download size limit, select the desired email size. 6. Tap Finish. To automatically receive attachments on Outlook e-mails 1.
Chapter 8 Working With Company E-mails and Meeting Appointments 8.1 Synchronizing Your Device with the Exchange Server 8.2 Working With Company E-mails 8.3 Managing Meeting Requests 8.
Working With Company E-mails and Meeting Appointments 8.1 Synchronizing Your Device with the Exchange Server To keep up-to-date with your company e-mails and meeting schedules while you’re out of the office, you can connect your device to the Internet wirelessly and synchronize with your company’s Exchange Server. Set up an Exchange Server connection Before you can synchronize or access information on the Exchange Server, you need to set up an Exchange Server connection on your device.
Working With Company E-mails and Meeting Appointments 115 Note If you synchronized e-mails with your PC before, open ActiveSync on your device and tap Menu > Add Server Source to set up an Exchange Server connection. When you're prompted to select information types for synchronization, you need to clear the E-mail check box under the Windows PC item first before you can select E-mail under Exchange Server. Tip To change Exchange Server settings, open ActiveSync then tap Menu > Configure Server.
Working With Company E-mails and Meeting Appointments also immediately updated onto your device when these items have been changed or new entries have been added on the Exchange Server. To make Direct Push work, you need to have a GPRS connection on your device. You need to perform a full synchronization between your device and the Exchange Server first before Direct Push can be enabled.
Working With Company E-mails and Meeting Appointments 117 Instant download through Fetch Mail The Fetch Mail feature downloads an entire e-mail immediately without the need for you to perform a full Send/Receive action. This limits the download to just the e-mail message that you want and helps save data cost. Requirement Fetch Mail works for your device only if your company is using Microsoft Exchange Server 2007 or higher. 1. Tap Start > Messaging > Outlook E-mail. 2. Tap an e-mail message to open it.
Working With Company E-mails and Meeting Appointments 5. From the Look in list, choose whether to search from your inbox or outbox only or to search all folders. 6. Tap Search. Flag your messages Flags serve as a reminder for you to follow-up on important issues or requests contained in the e-mail messages. Flagging messages, which has been a useful feature on desktop Outlook E-mail, can also be done in Outlook Mobile on your device. You can flag received e-mail messages on your device.
Working With Company E-mails and Meeting Appointments 119 Out-of-office auto-reply Outlook Mobile allows you to retrieve and change your out-of-office status. Just like desktop Outlook E-mail, Outlook Mobile automatically sends an auto-reply message when you’re not available. To send out-of-office auto-reply messages 1. Tap Start > Messaging > Outlook E-mail. 2. Tap Menu > Tools > Out of Office. 3. From the I am currently list, select Out of the Office. 4. Enter your auto-reply message then tap Done. 8.
Working With Company E-mails and Meeting Appointments • If the time of the meeting conflicts with your other appointments, a “Scheduling Conflict” status appears on top of the e-mail. 3. Choose whether or not to edit your response e-mail before sending then tap OK: 4. If you accepted the meeting request, it will automatically be added as an appointment in Calendar on your device. To view the list of meeting participants 1. Tap Start > Calendar. 2.
Working With Company E-mails and Meeting Appointments 121 8.4 Finding Contacts in the Company Directory In addition to having contacts on your device, you can access contact information from your organization’s Company Directory. By having over-the-air access to the Company Directory, you can easily send e-mail messages and meeting requests to anyone in your company.
Working With Company E-mails and Meeting Appointments Notes • You can save a contact from the Company Directory to your device by selecting the contact then tapping Menu > Save to Contacts. • You can search on the following information as long as that information is included in the Company Directory: First name, Last name, E-mail name, Display name, E-mail address, or Office location.
Chapter 9 Working With Documents and Files 9.1 Microsoft® Office Mobile 9.2 Adobe® Reader® LE 9.3 Copying and Managing Files 9.4 ZIP 9.
Working With Documents and Files 9.1 Microsoft® Office Mobile Microsoft® Office Mobile consists of the following applications: • Microsoft® Office Word Mobile lets you create and edit documents and templates in Word Mobile and save them as *.doc, *.rtf, *.txt, and *.dot files. • Microsoft® Office Excel® Mobile lets you create and edit Excel workbooks and templates on your device. • Microsoft® Office PowerPoint® Mobile allows you to view (not create) slide show presentations in *.ppt and *.
Working With Documents and Files 125 9.2 Adobe® Reader® LE Adobe® Reader® LE is an application for viewing PDF (Portable Document Format) documents on your device. It supports a subset of the features found in the PC versions of Adobe Reader. To open Adobe Reader LE • Tap Start > Programs > Adobe Reader LE. To open a PDF file on your device • Open a PDF file in Adobe Reader LE; or • Open File Explorer and find the desired PDF file, then tap the file to open it.
Working With Documents and Files 9.3 Copying and Managing Files You can copy files between your device and PC, or copy files to a storage card that is inserted on your device. You can also efficiently manage your files and folders using File Explorer. To copy files using Windows Mobile Device Center or ActiveSync 1. Connect your device to the PC. 2. Click File Management > Browse the contents of your device in Windows Mobile Device Center or click Explore in ActiveSync on your PC.
Working With Documents and Files 127 To copy files to a storage card 1. Make sure the storage card is properly inserted into your device. 2. Tap Start > Programs > File Explorer and navigate to the appropriate folder. 3. Tap and hold the file you want to copy, and tap Copy. 4. Tap the Down arrow ( ) then tap Storage Card from the list. 5. Tap Menu > Edit > Paste. Tip You can configure programs such as Word Mobile and Excel Mobile to directly save edited files on your storage card.
Working With Documents and Files 3. Tap Menu > Action > Extract. 4. Choose a folder in which files will be extracted to, then tap Extract. To create a zip archive 1. Tap File > New Archive. 2. On the Save As screen, enter a zip file name and choose a folder in which to save the zip file. You can also choose whether the zip file will be saved on the device’s main memory or a storage card. 3. Tap Save. 4. Tap Menu > Action > Add. 5. Double-tap the folder that contains the files you want to archive. 6.
Working With Documents and Files 129 To open Sprite Backup • On your device, tap Start > Programs > Sprite Backup. Sprite Backup can operate in two different modes: Basic mode and Advanced mode. Basic mode Advanced mode To back up data in Basic mode Basic mode is the default mode, and allows you to easily back up your entire device with the tap of a button. Note To change backup options or location, you will need to do it in Advanced mode. 1. On the Basic mode screen, tap Backup Now. 2.
Working With Documents and Files To back up data in Advanced mode Advanced mode is designed for users with more advanced backup requirements. 1. Tap Options > Switch to Advanced Mode. 2. In the Backup tab, you will see a tree view of the data and files on your device. Tap the ‘+’ symbol at the left of an item to view its subitems. Use the check boxes to select or exclude items for backup. 3. Tap the Backup button and follow the on-screen instructions to complete the backup.
Chapter 10 Getting Connected 10.1 Comm Manager 10.2 Connection Setup 10.3 Ways of Connecting to the Internet 10.4 Wi-Fi 10.5 GPRS 10.6 Dial-up 10.7 Starting a Data Connection 10.8 Internet Explorer® Mobile 10.9 Windows Live™ 10.10 Using Your Device as a Modem (Internet Sharing) 10.
Getting Connected 10.1 Comm Manager Comm Manager acts like a central switch that lets you enable or disable phone features as well as manage your data connections easily. To open Comm Manager • Tap Start > Programs > Comm Manager or tap Start > Settings > Connections tab > Comm Manager. 1 5 2 6 3 7 4 8 1 Tap to toggle between turning on or off Flight mode. Turning on Flight mode turns off the phone, Bluetooth and WLAN functions. For more information, see "Flight mode" in Chapter 3.
Getting Connected 133 10.2 Connection Setup Connection Setup configures your device’s data connections, such as GPRS, WAP, and MMS, for you so that you do not need to enter the settings manually onto your device. All you need to do is to select your network operator, then Connection Setup does all the configuration for you.
Getting Connected Connection Setup then starts to configure the data connection settings. 5. After the Connection Setup completes the configuration, tap Restart. 10.3 Ways of Connecting to the Internet Your device’s networking capabilities allow you to access the Internet or your corporate network at work through wireless and conventional connections.
Getting Connected 135 : Wi-Fi is turned off. 3. Available wireless networks will be detected. Connect to wireless networks After Wi-Fi is turned on in Comm Manager, your device scans for available wireless networks in your area. To connect to a wireless network 1. The network names of the detected wireless networks will be displayed on a popup message window. Tap the desired wireless network, then tap OK. 2.
Getting Connected Next time you want to connect to the wireless network that you selected, just turn on Wi-Fi in Comm Manager and you will automatically be connected. You will not see the pop-up message windows again, and you will not be prompted to enter the network key of the previously accessed wireless network (unless you perform a hard reset which will erase custom settings on your device).
Getting Connected 137 • Configure Wireless Networks screen. Tap Start > Settings > Connections tab > Wi-Fi > Wireless tab. This screen displays the wireless networks currently available. To connect to a wireless network in the list, tap and hold on the desired network, then tap Connect. Tap a wireless network in the list to view or change its connection settings. You can also add new wireless networks, if available, by tapping Add New. 10.
Getting Connected 5. Enter the Access point name, then tap Next. 6. Enter the user name and password, only if required. 7. Tap Finish. Notes • To view help information for any screen, tap the help icon ( ). • To modify your connection settings, tap Manage existing connections on the Connections screen, and complete the connection wizard. 10.
Getting Connected 139 10.7 Starting a Data Connection After setting up a data connection such as GPRS or ISP dial-up on your device, you can now connect your device to the Internet. The connection is started automatically when you begin using a program that accesses the Internet such as Internet Explorer® Mobile. To manually start a data connection If you have set up multiple types of data connections on your device, you can manually start a connection. 1.
Getting Connected • To pan towards the right, touch and hold on the touch screen then drag your finger to the left. To pan towards the left, touch and hold on the touch screen then drag your finger to the right. • To pan freely around a Web page, touch and hold on the touch screen then drag your finger in the desired direction. For more information about finger scrolling and panning, see Chapter 1.
Getting Connected 141 Tap Menu > Tools and choose to send the current Web page link, view the page’s properties, or set preferences. To save an image from a Web page to your device, tap and hold the image then tap Save Image. For more information about using Internet Explorer® Mobile, please go to: http://www.microsoft.com/windowsmobile/help/pocketpc/ browseinternet.
Getting Connected 10.9 Windows Live™ Windows Live™ gives you full Internet experience on your device. It helps you to find information, pursue your interests, and get in touch with friends and family on the Internet easier. Windows Live™ offers the following key features: • Live Search Bar, which lets you search for information on the Web. • Live Messenger, the next generation of MSN Messenger Mobile. • Live Mail, the next generation of Hotmail.
Getting Connected 143 If you sync Contacts and Messenger, your Windows Live contacts will be added to the contact list and to Live Messenger on your device. If you sync E-mail, your Windows Live Mail or Hotmail inbox messages will be downloaded to your device. 7. Tap Next. 8. After synchronization is complete, tap Done. The Windows Live™ interface On the main interface of Windows Live™, you will see a search bar, navigation bar, and an area where you can customize to show your picture.
Getting Connected Windows Live Messenger With this mobile version of Windows Live Messenger, you enjoy many of the same cool features that you get from the desktop version, which include the following: • Instant messaging via text and voice • Multiple conversations • Add emoticons • Contact list with presence • Send and receive files including photos • Change status/display name • View contacts by online status, groups, and more • Send messages even when a contact is offline Note Before
Getting Connected 145 To start and end conversations 1. In the contact list, select a contact then tap Send IM to open a message screen. 2. Enter your text message in the text entry area of the message screen. 3. To add an emoticon, tap Menu > Add emoticon then tap an icon from the list of emoticons. 4. Tap Send. 5. To end a conversation with the current contact, tap Menu > End conversation. Tips • To send a file, tap Menu > Send. You can choose to send a picture, voice clip or any file.
Getting Connected 10.10 Using Your Device as a Modem (Internet Sharing) Internet Sharing connects your PC or notebook computer to the Internet by using your device’s data connection (GPRS or EDGE, for instance). You can choose to connect via USB or Bluetooth. Notes • Make sure your device has a SIM card installed, and your device has a GPRS or phone dial-up modem connection. If your device has not been set up with a data connection yet, tap Menu > Connection Settings on the Internet Sharing screen.
Getting Connected 147 To use your device as a Bluetooth modem For the computer to use the Internet connection of your device, activate Internet Sharing on your device, then set up a Bluetooth Personal Area Network (PAN) between the computer and your device. 1. On your device, turn on Bluetooth and set it to visible mode by following the steps in “To turn Bluetooth on and make your device visible”. 2.
Getting Connected 8. On the Internet Sharing screen on your device, check if a connected status is displayed, which indicates that your computer has been successfully connected to the Internet using your device as a Bluetooth modem. To end the Internet connection • On the Internet Sharing screen, tap Disconnect. 10.11 Bluetooth Bluetooth is a short-range wireless communications technology.
Getting Connected 149 Bluetooth partnerships A Bluetooth partnership is a relationship that you create between your device and another Bluetooth-enabled device in order to exchange information in a secure manner. To create a Bluetooth partnership 1. On your device, tap Start > Settings > Connections tab > Bluetooth. 2. On the Devices tab, tap Add new device. Your device searches for other Bluetooth devices and displays them in the box. 3. Tap the desired device name in the box, then tap Next. 4.
Getting Connected Tips • To rename a Bluetooth partnership, tap and hold the partnership’s name on the Devices tab of the Bluetooth Settings screen, then tap Edit. • To delete a Bluetooth partnership, tap and hold the partnership’s name on the Devices tab, then tap Delete. Connect a Bluetooth hands-free or stereo headset For hands-free phone conversations, you can use a Bluetooth hands-free headset such as a car kit with your device.
Getting Connected 151 Beam information using Bluetooth You can beam information, such as contacts, calendar items, and tasks, as well as files from your device to your computer or to another Bluetoothenabled device. Note If your computer does not have built-in Bluetooth capability, you need to connect and use a Bluetooth adapter or dongle on your computer. To beam information from your device to a computer 1. Turn on Bluetooth on your device, and make your device visible.
Getting Connected 4. To beam a contact, tap Menu > Send Contact > Beam. To beam other types of information, tap Menu > Beam [type of item]. 5. Tap the device name to which you want to send the beam. 6. If you beamed a calendar, task, or contact item to your computer and it is not automatically added to Outlook, select File > Import and Export in Outlook to import it.
Getting Connected 153 To use Bluetooth Explorer 1. Bluetooth Explorer is integrated with the File Explorer program. You can open it by tapping Start > Programs > Bluetooth Explorer or by tapping Down arrow ( ) on the upper left of File Explorer then tapping Bluetooth. 2. Bluetooth Explorer then scans for other Bluetooth devices that have file sharing enabled. From the list, tap to select a Bluetooth device you want to connect to.
Getting Connected
Chapter 11 Experiencing Multimedia 11.1 Camera 11.2 Pictures & Videos 11.3 Windows Media® Player Mobile 11.4 Streaming Media 11.
Experiencing Multimedia 11.1 Camera Taking photos and recording video clips along with audio are easy with your device’s built-in camera. To open the Camera screen • Press the CAMERA button on your device; or • CAMERA button Tap Start > Programs > Camera. The screen orientation automatically switches to landscape mode when you open Camera. To exit the Camera • Tap the Exit icon ( screen.
Experiencing Multimedia 157 The available capture modes of the camera are as follows: • Photo: Captures standard still images. • Video: Captures video clips, with or without accompanying audio. • MMS Video: Captures video clips suitable for sending with MMS messages. • Contacts Picture: Captures a still image and gives you the option to immediately assign it as a Photo ID for a contact. • Picture Theme: Captures still images and places them within frames.
Experiencing Multimedia On-screen controls and indicators 1 6 2 3 4 Photo mode 5 Video mode 1 Mode Switching control. Tapping the left/right arrow ( / ) on the screen allows you to switch the capture mode. 2 Remaining information indicator. In Photo, Contacts Picture, Picture Theme, Sports, and Burst modes, this shows the remaining, available shots of pictures based on current settings. In Video and MMS Video modes, this shows the remaining duration that can be recorded.
Experiencing Multimedia 159 9 7 Picture Theme mode 8 Sports mode 7 Template Selector icon. In Picture Theme mode, tap to toggle among the different templates. After taking the first photo, this icon switches to Progress indicator. 8 Progress indicator. In Picture Theme, Sports and Burst modes, this shows the number of consecutive shots. 9 Exit. Tap to exit the Camera program.
Experiencing Multimedia The camera zoom range for a picture or a video clip depends on the capture mode and capture size. The following table is a summary. Capture mode Photo Video MMS Video Contacts Picture Picture Theme Sports Burst Capture size setting Zoom range 2M (1200 x 1600) No zooming available 1M (960 x 1280) 1.0x to 2.0x Large (480 x 640) 1.0x to 2.0x Medium (240 x 320) 1.0x to 4.0x Small (120 x 160) 1.0x to 10.
Experiencing Multimedia 161 1 4 2 5 3 1 Resolution. Available resolutions include: . See the table in the previous page for the detailed capture sizes. 2 Storage. Tap to toggle between saving captured photos or video clips on the device memory ( ) or on the storage card ( ). 3 White Balance. White balance settings include: Auto ( ), Daylight ( ), Night ( ), Incandescent ( ), and Fluorescent ( ). 4 Brightness. Tapping the minus/plus icon ( / ) decreases or increases the brightness level. 5 Self-timer.
Experiencing Multimedia You can also tap the following icons at the bottom of the Review screen: Icon Function Back Go back to the live Camera screen. Delete Remove the captured image or video. Send Send via e-mail or MMS. View View the image in the Pictures & Videos program, or play the captured video in Windows Media® Player. Assign to Contacts Associate the photo to a selected contact.
Experiencing Multimedia 163 Self-timer menu • Self-timer. Setting the Self-timer to 2 seconds or 10 seconds delays the capturing by the specified time after you press the CAMERA button or the ENTER button. Template menu • Template. Select a template (in Picture Theme mode only). Sports/Burst Settings menu • Capture Speed. This determines the interval between shots. Fast captures consecutive shots at the shortest interval. • Snapshots. Select the number of consecutive shots to capture (in Sports mode only).
Experiencing Multimedia Capture Mode menu • Mode. Switch between different capture modes such as Photo, Video, Contacts Picture, and more. For more information about these modes, see “Capture modes” earlier in this chapter. Advanced menu Tap the left/right icon in this bar to switch between the menu pages in the Advanced menu. Alternatively, when using the NAVIGATION Control buttons, press NAVIGATION up/down to go to this bar. Then, press NAVIGATION left/right to switch between the menu pages.
Experiencing Multimedia 165 • Flicker Adjustment. When taking indoor shots, flicker on the camera screen may be caused by inconsistencies between the vertical scan rate of the camera display and the flicker frequency of fluorescent lighting. To reduce flicker, you can change the flicker adjustment setting to Auto or to the proper frequency (50Hz or 60Hz) of the country where your device is being used. • Record with Audio.
Experiencing Multimedia 11.2 Pictures & Videos Pictures & Videos allows you to manage the following types of media files on your device: File Type File Extensions Image *.bmp, *.jpg, *.gif, *.png GIF animation *.gif Video *.avi, *.wmv, *.mp4, *.3gp, *.3g2 Audio *.wma To open Pictures & Videos • Tap Start > Programs > Pictures & Videos. To copy media files to your device • Copy pictures and GIF animation files from your PC or a storage card to the My Pictures folder on your device.
Experiencing Multimedia 167 To play GIF animation files 1. Select a GIF animation file (marked with a icon)and tap View. 2. The GIF Animation program then opens and plays the animation. To play videos 1. By default, the contents of the My Pictures folder will be shown. 2. To find the video clips that you captured, tap the down arrow ( ) next to the My Pictures folder and tap My Documents > My Videos. Video clips are displayed as thumbnails by default, which appear with a media icon ( ). 3.
Experiencing Multimedia • • Note To crop a picture, tap Menu > Crop. Next, tap and drag to select the area to crop. Tap inside the box to crop, or tap outside the box to cancel cropping. To adjust the brightness and contrast levels of a picture, tap Menu > Auto Correct. To undo an edit, tap Menu > Undo. To cancel all unsaved edits you made to the picture, tap Revert to Saved. 11.
Experiencing Multimedia 169 About the controls The following are available controls on the Windows Media® Player Mobile. Tap and drag to jump to any part of the video or audio Mute/Unmute Full screen Increase Volume Visit WindowsMedia.com Decrease Volume Skip to the beginning of Skip to the next file the current file or to the Play/Pause previous file About the screens and menus Windows Media® Player Mobile has three primary screens: • Playback screen.
Experiencing Multimedia Synchronize video and audio files Use the latest version of Windows Media® Player on your PC to synchronize digital media files from your PC to your device. This ensures that protected files and album art (for skins) are copied to your device correctly. To synchronize content to your device automatically 1. On your PC, start Windows Media® Player and then connect your device to your PC. 2. In the Device Setup Wizard, select Yes, search my computer now. 3.
Experiencing Multimedia 171 Playlists and Library List Content List Sync List 4. Click Start Sync to start synchronizing the selected files to your device. Notes • Use Windows Media® Player 11 or higher on your PC to synchronize media files to your device. • Audio files copy faster if Windows Media® Player is configured to automatically set the quality level for audio files copied to your device. For more information, see the Windows Media® Player Help.
Experiencing Multimedia To play video and audio files on your device 1. Select a category (for example, My Music or My Playlists). 2. Tap and hold the item that you want to play (such as a song, album, or artist name), then tap Play. Tips • To play a media file that is stored on your device but is not in a library, on the Library screen, tap Menu > Open File. Tap and hold the item that you want to play (such as a file or a folder), then tap Play.
Experiencing Multimedia 173 11.4 Streaming Media Streaming Media lets you to stream live broadcasts or on-demand media content from the Web. The media is sent in a continuous stream to your device and is played as it arrives, along with the audio. Jog Bar Volume level Full screen Stop Play/Pause Increase/Decrease volume Mute/Unmute The Streaming Media program allows you to play 3GP and MPEG-4 files. It also supports playback of SDP (Session Description Protocol) files.
Experiencing Multimedia To stream media files directly on the Streaming Media Player Streaming Media only supports RTSP links when you stream *.3gp and *.mp4 files directly on the program. Note Before you launch the Streaming Media program, make sure that you are connected to the Internet. 1. Tap Start > Programs > Streaming Media. 2. From the program, tap Connect. 3. Enter the URL for the Web site (rtsp://) and the file name. 4. Tap Connect. 5. Streaming Media then starts playing the file.
Experiencing Multimedia 175 11.5 Audio Manager Audio Manager is a music browser and player in one. It gives you access to all the music files on your device, and allows you to easily browse for the music that you want to play by organizing music into categories such as title, artist, album, etc. You can also create playlists of your favorite songs and use the integrated Music Player to play them back. To launch Audio Manager • Tap Start > Programs > Audio Manager.
Experiencing Multimedia When you tap a category on the Library’s Main screen, you will see more submenus which may have deeper levels of menus. For example, when you tap Artists, another level of submenus will be listed showing artist names. When you tap an artist name, more submenus showing album names will be displayed. Just keep opening the submenus until you reach the level where song titles can be selected for playback.
Experiencing Multimedia 177 Playlists The Playlists screen shows the current playlists that are found on the device memory and memory card. There are two types of playlists that will be shown on the Playlist screen: • Windows Media® Player playlists. These are playlists that are in Windows Media® Player Mobile’s Library (which is synchronized with Windows Media® Player on your computer), and they are indicated by the Windows Media® Player icon ( ).
Experiencing Multimedia To play back a playlist 1. On the Playlists screen, tap to select a playlist. 2. Tap the first song in the selected playlist. Music Player automatically opens and starts playing the first song. After each song, the next one in the playlist will be played. Note The content of playlists is not automatically updated when music files have been deleted from the device memory or memory card. Music Player will display a notification message when music files in a playlist cannot be found.
Chapter 12 Managing Your Device 12.1 Adding and Removing Programs 12.2 Using Task Manager 12.3 Resetting Your Device 12.4 Managing Memory 12.5 Windows Update 12.
Managing Your Device 12.1 Adding and Removing Programs Before you purchase additional programs for your device, make sure that they are compatible with your device. To add programs 1. Download the program to your PC (or insert the CD or disk that contains the program into your PC). You may see a single *.exe file, a *.zip file, a Setup.exe file, or several versions of files for different device types and processors. Be sure to select a program designed for your device and processor type. 2.
Managing Your Device 181 To configure the Exit ( ) button You can configure the Exit button to shut down running programs when the button is tapped, or to just temporarily close the program screen but keep the program running. 1. On the Task Manager screen, tap the Button tab. 2. Select the Enable the “X” button to end running programs check box. Note When the Enable the “X” button to end running programs check box is not selected, tapping the Exit button will only close a program screen.
Managing Your Device 12.3 Resetting Your Device Soft reset Occasionally, you may need to reset your device. A soft (or normal) reset of your device clears all active program memory and shuts down all active programs. This can be useful when your device is running slower than normal, or a program is not performing properly. A soft reset is also necessary after the installation of some programs. If a soft reset is performed when programs are running, unsaved work will be lost.
Managing Your Device 183 This operation will delete all your personal data, and reset all settings to manufacturer default. Press Action to restore manufacturer default, or press other keys to cancel. 3. Release the TALK and END buttons, and then press ENTER on your device. Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.
Managing Your Device • Move files to a storage card. Tap Start > Programs > File Explorer. Tap and hold the file, and tap Cut. Browse to the storage card folder and tap Menu > Edit > Paste. • Delete unnecessary files. Tap Start > Programs > File Explorer. Tap and hold the file, and tap Delete. • Delete large files. To find your largest files, tap Start > Programs > Search. In the Type list, tap Larger than 64 KB, and tap Search.
Managing Your Device 185 To change Windows Update options 1. Tap Start > Settings > Systems tab > Windows Update. 2. Tap Menu and select the option you want to change. • Tap Connections to change how the device connects to the Internet when checking for updates. • Tap Change Schedule to change how Windows Update checks for Windows Mobile® updates. 12.6 Battery Saving Tips How long your battery power lasts depends on battery type and how you use your device.
Managing Your Device • Turn Bluetooth off when you are not using it. Make your device visible to other devices only when you are trying to establish a Bluetooth partnership. For more information about Bluetooth, see Chapter 10. • Lower the volume. • Close battery-intensive programs, such as the Camera, when you are done using them. Make sure the programs are ended and are not continuously running in the background.
Chapter 13 Using Other Applications 13.1 Voice Speed Dial 13.2 Java 13.
Using Other Applications 13.1 Voice Speed Dial You can record voice tags so that you can dial a phone number or launch programs simply by speaking a word. Create a voice tag for a phone number 1. Tap Start > Contacts to open the Contacts list. 2. Do one of the following: • Tap and hold the desired contact, then tap Add Voice Tag. • Select the desired contact, then tap Menu > Add Voice Tag. • Tap the desired contact to open the contact’s detailed screen, then tap Menu > Add Voice Tag. 3.
Using Other Applications 189 • • Tip Tap the Play button ( Tap the Delete button ( ) to play the voice tag. ) to delete the voice tag. To ensure voice recognition accuracy, please record your voice in a quiet place. Create a voice tag for a program 1. Tap Start > Settings > Personal tab > Voice Speed Dial. 2. The Application tab displays a list of all installed programs on your device.
Using Other Applications 13.2 Java MIDlets are Java applications such as games and tools that can run on mobile devices, while a MIDlet suite is a collection of one or more MIDlets. The Java program lets you download, install and manage MIDlets or MIDlet suites on your device. Your device supports Java 2 Micro Edition, J2ME. To open the Java program • Tap Start > Programs > Java. Install and launch MIDlets/MIDlet suites There are several ways to install a MIDlet/MIDlet suite.
Using Other Applications 191 To run a MIDlet/MIDlet suite Do one of the following: • After installation of the MIDlet/MIDlet suite is complete, tap Yes. • On the Java screen, open the folder that contains the MIDlet/MIDlet suite. Select the MIDlet/MIDlet suite then tap Launch. To stop running a MIDlet/MIDlet suite • Tap Exit or Quit if presented on the MIDlet/MIDlet suite’s screen or menu.
Using Other Applications 13.3 Spb GPRS Monitor Using Spb GPRS Monitor, you can monitor how much data you have sent and received on your device, and check the network usage costs by taking into account your service plan details. You can also view connection cost and traffic charts, generate reports of network connection usage, and export reports to CSV files for use with Microsoft® Office Excel® and Access. Install GPRS Monitor The GPRS Monitor program is included on the Application CD.
Using Other Applications 193 The GPRS Monitor icon and pop-up window Another way of displaying status information visually is by enabling the GPRS Monitor icon to be shown on the title bar. This icon shows the GPRS/ dial-up connection speed, data traffic, and battery status. To show the GPRS Monitor icon on the title bar 1. Tap Start > Programs > Spb GPRS Monitor. 2. Tap Tools > Options > Icon tab. 3. Select the Show taskbar icon check box.
Using Other Applications To enter your service plan details Service plan details, or tariff, determine the price that you pay for your data transfers. The tariff may either be flat rate or time-based, depending on whether you’re using GPRS or a phone dial-up connection for data transfers. Contact your service provider to find out about your tariff, and enter the information in the Tariff tab or the Tariff Details tab on the Options screen.
Appendix A.1 Specifications A.
Appendix A.1 Specifications System Information Processor TI’s OMAP™ 850 201 MHz Operating System Windows Mobile® 6 Professional Power Battery Rechargeable Lithium-ion battery, 1100 mAh Charging Time 4 hours Battery Life (estimates) Standby time: Up to 200 hours Talk time: Up to 5 hours Media playback time: Up to 8 hours (WMV); Up to 12 hours (WMA) AC Adapter Voltage range/frequency: 100 - 240V AC, 50/60 Hz DC output: 5V and 1A Display LCD Type 2.
Appendix 197 Camera Module Type 2 megapixel color CMOS camera Resolution Photo: 1200x1600 (UXGA), 960x1280 (SXGA), 480x640 (VGA), 240x320 (QVGA), 120x160 (QQVGA) Video: 176x144 (QCIF), 128x96 Digital Zoom Up to 10X Connections I/O Port HTC ExtUSBTM : 11-pin mini-USB and audio jack in one Full-speed USB 2.0 HTC H2Wire support (ExtUSB is a proprietary connection interface that is trademarked by HTC). Wireless Connections Bluetooth 2.0, Wi-Fi (IEEE 802.
Appendix Controls and Lights Device Control • • • • • • • LEDs The right LED shows Green and Amber lights for GSM/ GPRS/EDGE standby, message, and network status as well as for notification and battery charging status.
Appendix 199 A.2 Regulatory Notices Regulatory Agency Identifications For regulatory identification purposes, your product is assigned a model number of ELF0100. To ensure continued reliable and safe operation of your device, use only the accessories listed below with your ELF0100. The Battery Pack has been assigned a model number of ELF0160. Note This product is intended for use with a certified Class 2 or Class 3 Limited Power Source, rated 5 Volts DC, maximum 1 Amp power supply unit.
Appendix • ETSI EN 300 328 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; data transmission equipment operating in the 2.4 GHz ISM band and using spread spectrum modulation techniques. • EN 50360:2001 Product standard to demonstrate the compliance of mobile phones with the basic restrictions related to human exposure to electromagnetic fields (300 MHz - 3 GHz).
Appendix 201 The exposure standard for wireless mobile phones employs a unit of measurement known as the Specific Absorption Rate, or SAR. The standard incorporates a substantial margin of safety to give additional protection for the public and to account for any variations in usage.
Appendix Hearing Aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider, or call the customer service line to discuss alternatives. Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.
Index A A2DP 150 ActiveSync - Comm Manager 132 - overview 38 - set up 75 - synchronize 76, 115 Add and remove programs 180 Adobe Reader LE 38, 125 Alarm 66 Answer/end a call 57 Appointment search 50 Attachment - add to e-mail 108 - download 109 Audio Manager 39, 175 B Backlight 64, 65 Back up data 128 Basic settings 64 Battery - battery information 18 - charge battery 22 - save battery power 185 Beam - via Bluetooth 151 Block Recognizer 48 Bluetooth - Bluetooth Explorer 39, 152 - Bluetooth file sharing 152
Index Conference call 58 Configure data connection settings 21 Connect device to Internet - Dial-up 138 - GPRS 137 - start a connection 139 - ways of connection 134 - Wi-Fi 134 Connection Setup 21, 36, 133 Contacts 38, 80 Contacts Picture capture mode 157 Contacts search 50 Copy - contacts to SIM card 84 - copy and manage files 126 - media files from PC to device 170 - SIM contacts to device 84 Customize - Start menu 69 - Today screen 67 D Device ID 65 Device name 65 Dial-up 138 Dimensions and weight 197
Index 205 I M IMAP4 104 Input methods - Block Recognizer 48 - Keyboard 47 - Letter Recognizer 47 - Symbol Pad 49 - Transcriber 48 Input Panel 46 International call 61 Internet 134 Internet Explorer Mobile 38, 139 Internet Sharing 39, 146 Mail search 50 Make call - from Call History 56 - from Contacts 54 - from Phone program 54 - from SIM Manager 57 - from Speed Dial 56 - from TouchFLO 55 Memory 183 Messaging - about 38, 96 - e-mail 104, 107 - multimedia (MMS) 99 - text (SMS) 97 Messenger 39, 144 Microso
Index N Notes 39, 91 Notes search 50 Now Playing screen (Windows Media Player Mobile) 169 O Plug-in - GPRS Monitor 192 - HTC Home 26 POP3 104 Portrait 23 PowerPoint Mobile 38, 124 Programs 38 Put call on hold 58 Office Mobile 38, 124 Open PDF file 125 Owner information 68 Q P R Panning - finger panning 34 Password 70 Phone 38, 52, 54 Phone services 67 Photo capture mode 157 Pictures & Videos - edit picture 167 - file formats 166 - overview 39 - play GIF animation 167 - play videos 167 - view pictu
Index 207 - e-mail 107 - MMS message 101 - text message (SMS) 97 Settings 40, 64 - camera 160 Settings (Connections tab) - Beam 43 - Bluetooth 43, 148 - Comm Manager 43, 132 - Connections 43, 137, 138 - CSD Line Type 43 - GPRS Setting 43 - Connection Setup 43, 133 - SMS Service 43 - USB to PC 43, 77 - Wi-Fi 43, 137 - Wireless LAN 43, 136 Settings (Personal tab) - Buttons 40 - Input 40 - Lock 41, 70 - Menus 41, 69 - Owner Information 41, 68 - Phone 41, 65, 67 - Sounds & Notifications 41, 66 - Today 41, 67 - V
Index - ActiveSync 76 - change information types 76 - via Bluetooth 77 - Windows Media Player 78, 170 - with computer 76 - with Exchange Server 114 System information 196 T Tasks 40, 89 Tasks search 50 Task Manager 180 Text messages - copy from and to SIM card 99 - send 97 Text size (screen) 65 Today screen 24, 67 TouchFLO 30, 42, 55 Touch Cube (TouchFLO) 30 Transcriber 48 Troubleshoot - sync connection 77 - Windows Media Player Mobile 172 Turn device on and off 21 Turn phone function on and off 52, 13
