User Manual www.htc.
Please Read Before Proceeding THE BATTERY IS NOT CHARGED WHEN YOU TAKE IT OUT OF THE BOX. DO NOT REMOVE THE BATTERY PACK WHEN THE DEVICE IS CHARGING. YOUR WARRANTY IS INVALIDATED IF YOU OPEN OR TAMPER WITH THE DEVICE’S OUTER CASING. PRIVACY RESTRICTIONS Some countries require full disclosure of recorded telephone conversations, and stipulate that you must inform the person with whom you are speaking that the conversation is being recorded.
Opera® Mobile from Opera Software ASA. Copyright 1995-2008 Opera Software ASA. All Rights Reserved. Google is a registered trademark and Google Maps is a trademark of Google, Inc. in the United States and other countries. YouTube is a trademark of Google, Inc. Sprite Backup is a trademark or service mark of Sprite Software. Copyright © 2008, Esmertec AG. All Rights Reserved. Copyright © 2003-2008, ArcSoft, Inc. and its licensors. All Rights Reserved.
Disclaimers THE WEATHER INFORMATION, DATA AND DOCUMENTATION ARE PROVIDED “AS IS” AND WITHOUT WARRANTY OR TECHNICAL SUPPORT OF ANY KIND FROM HTC.
Limitation of Damages TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL HTC OR ITS PROVIDERS BE LIABLE TO USER OR ANY THIRD PARTY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES OF ANY KIND, IN CONTRACT OR TORT, INCLUDING, BUT NOT LIMITED TO, INJURY, LOSS OF REVENUE, LOSS OF GOODWILL, LOSS OF BUSINESS OPPORTUNITY, LOSS OF DATA, AND/OR LOSS OF PROFITS ARISING OUT OF, OR RELATED TO, IN ANY MANNER, OR THE DELIVERY, PERFORMANCE OR NONPERFORMANCE OF OBLIGATIONS, OR
notebook computer has an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet which is properly installed and grounded in accordance with all local codes and ordinances. SAFETY PRECAUTIONS FOR POWER SUPPLY UNIT • Use the correct external power source A product should be operated only from the type of power source indicated on the electrical ratings label.
• Keep metal objects away so they don’t come in contact with the battery or its connectors as it may lead to short circuit during operation. • Do not use a battery that appears damaged, deformed, or discolored, or the one that has any rust on its casing, overheats, or emits a foul odor. • Always keep the battery out of the reach of babies and small children, to avoid swallowing of the battery. Consult the doctor immediately if the battery is swallowed.
NOTE: For France, Earphone (listed below) for this device have been tested to comply with the Sound Pressure Level requirement laid down in the applicable NF EN 503321:2000 and/or NF EN 50332-2:2003 standards as required by French Article L. 5232-1. • Earphone, manufactured by HTC, Model HS S300.
ROAD SAFETY Vehicle drivers in motion are not permitted to use telephony services with handheld devices, except in the case of emergency. In some countries, using handsfree devices as an alternative is allowed. SAFETY PRECAUTIONS FOR RF EXPOSURE • Avoid using your phone near metal structures (for example, the steel frame of a building). • Avoid using your phone near strong electromagnetic sources, such as microwave ovens, sound speakers, TV and radio.
NONIONIZING RADIATION Your device has an internal antenna. This product should be operated in its normaluse position to ensure the radiative performance and safety of the interference. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, it is recommended that no part of the human body be allowed to come too close to the antenna during operation of the equipment. Use only the supplied integral antenna.
11 General Precautions • Avoid applying excessive pressure to the device Do not apply excessive pressure on the screen and the device to prevent damaging them and remove the device from your pants’ pocket before sitting down. It is also recommended that you store the device in a protective case and only use the device stylus or your finger when interacting with the touch screen. Cracked display screens due to improper handling are not covered by the warranty.
• Avoid wet areas Never use the product in a wet location. • Avoid using your device after a dramatic change in temperature When you move your device between environments with very different temperature and/or humidity ranges, condensation may form on or within the device. To avoid damaging the device, allow sufficient time for the moisture to evaporate before using the device.
13 Contents Chapter 1 Getting Started 23 1.1 Getting to Know Your Touch Phone and Accessories...................................... 24 Left panel......................................................................................................................................24 Right panel...................................................................................................................................24 Front panel . ...............................................................
1.10 Quick Menu...................................................................................................... 46 1.11 LED Alerts......................................................................................................... 47 1.12 Adjusting the Volume...................................................................................... 47 1.13 Using your Device as a USB Drive...................................................................
15 Mail.................................................................................................................................................75 Internet..........................................................................................................................................77 Photos and Videos.....................................................................................................................77 Music................................................................
Chapter 5 Synchronizing Information With Your Computer 103 Chapter 6 Exchanging Messages 113 5.1 About Synchronization...................................................................................104 Ways to synchronize.............................................................................................................. 104 5.2 Setting Up Windows Mobile® Device Center on Windows Vista®................. 105 Set up synchronization in Windows Mobile Device Center...................
17 6.5 E-mail Setup Wizard.........................................................................................126 Set up an Internet e-mail account.................................................................................... 126 Set up a custom domain e-mail........................................................................................ 129 6.6 Using E-mail......................................................................................................
8.2 Starting a Data Connection.............................................................................155 8.3 Using Opera Mobile™.......................................................................................156 View web pages...................................................................................................................... 158 Opera Mobile menu............................................................................................................... 158 8.
19 Chapter 10 Navigating on the Road 191 Chapter 11 Experiencing Multimedia 199 10.1 Google™ Maps (Available by Country)......................................................... 192 Open Google Maps................................................................................................................ 192 Search for a place of interest.............................................................................................. 193 10.2 Guidelines and Preparation for Using GPS..............
11.4 Using FM Radio.............................................................................................. 223 FM Radio controls................................................................................................................... 223 Device controls used in FM Radio..................................................................................... 225 Save presets.......................................................................................................................
21 12.11 12.12 12.13 12.14 12.15 12.16 SIM Manager................................................................................................ 255 Sprite Backup............................................................................................... 257 Tasks............................................................................................................. 260 Voice Recorder.............................................................................................
13.8 Managing Memory........................................................................................ 287 13.9 Resetting Your Device.................................................................................... 288 Soft reset.................................................................................................................................... 288 Hard reset...........................................................................................................................
Chapter 1 Getting Started 1.1 Getting to Know Your Touch Phone and Accessories 1.2 Installing the SIM Card, Battery, and Storage Card 1.3 Charging the battery 1.4 Using the Strap Holder 1.5 Starting Up 1.6 Navigating Your Device 1.7 Home Screen 1.8 Status Icons 1.9 Start Menu 1.10 Quick Menu 1.11 LED Alerts 1.12 Adjusting the Volume 1.
Getting Started 1.1 Getting to Know Your Touch Phone and Accessories Left panel Right panel VOLUME UP During a call or when playing music, press this button to increase the volume. VOLUME DOWN During a call or when playing music, press this button to lower the volume. Stylus (See “Stylus” in this chapter for details.
Getting Started 25 Front panel Hardware Keyboard See Chapter 4 for details. Touch Screen Earpiece Listen to a phone call from here. Second Camera Use this camera for video call conversations or to take a self-portrait. HOME Press to return to the Home screen. See Chapter 3 for details. BACK Press to return to the previous screen. END • Press to end a call or return to the Home screen. • Press and hold to lock the device.
Getting Started Notes When using the four buttons — HOME, BACK, TALK/SEND, and END — and the Navigation Control, please observe the following precautions: • Make sure to press on the icons of the four buttons for the best accuracy. When pressing on the Navigation Control, make sure to press the outer areas near the ENTER button for directional control. • For best results, press with your fingertip. Do not wear gloves. Back panel 3.
Getting Started 27 Top panel POWER Press to turn off the display temporarily. To turn off the power, press and hold for about 5 seconds. For more information, see “Starting Up” in this chapter. Bottom panel Microphone Reset With the stylus, press the Reset button to soft-reset the device. Sync Connector/Earphone Jack/TV Out • Connect the supplied USB cable to synchronize information or plug in the AC adapter to recharge the battery.
Getting Started Accessories The product package includes the following items and accessories: • Battery • AC adapter • Screen protector • Stereo headset • USB sync cable • Pouch • Quick Start Guide and TouchFLO 3D Guide • Getting Started and Application discs • Extra stylus 1.2 Installing the SIM Card, Battery, and Storage Card Always turn off your device before installing or replacing the SIM card, battery, and storage card.
Getting Started 29 SIM card The SIM card contains your phone number, service details, and phonebook/ message memory. Your device supports both 1.8V and 3V SIM cards. Note Some legacy SIM cards may not function with your device. You should consult with your service provider for a replacement SIM card. There may be fees for this service. To install the SIM card 1. Make sure your device is turned off. 2.
Getting Started Battery life estimates (approximations): • Standby time: Up to 367 hours for GSM Up to 462 hours for WCDMA • Talk time: Up to 419 minutes for GSM Up to 378 minutes WCDMA • Video call time: Up to 189 minutes for WCDMA Note Battery life is subject to network and phone usage. Warning! To reduce risk of fire or burns: • Do not attempt to open, disassemble, or service the battery pack. • Do not crush, puncture, short external contacts, or dispose of in fire or water.
Getting Started 31 To remove the battery 1. Make sure your device is turned off. 2. Remove the back cover. 3. The bottom right side of the battery has a protruding grip. Lift the protruding grip to remove the battery. Storage card Battery grip To have additional storage for your images, videos, music, and files, you can purchase a microSD™ card and install it into your device. To install a microSD card Insert the microSD card into the slot with its gold contacts facing down.
Getting Started 1.3 Charging the battery New batteries are shipped partially charged. Before you start using your device, it is recommended that you install and charge the battery. Some batteries perform best after several full charge/discharge cycles. To charge the battery 1. Connect the USB connector of the AC adapter to the sync connector on your device. 2. Plug in the AC adapter to an electrical outlet to start charging the battery.
Getting Started 33 1.4 Using the Strap Holder The strap holder at the bottom panel of your device allows you to attach a wrist strap, neck lanyard, or string accessory. To attach a strap, lanyard or string accessory to the strap holder 1. Remove the back cover. 2. Insert the loop of the strap, lanyard or string accessory through the strap holder hole on the back cover.
Getting Started 1.5 Starting Up After installing your SIM card and battery and charging the battery, you can now power on and start using your device. Turn your device on and off To turn on the power 1. Press and hold the POWER button for a few seconds. 2. When you turn on your device for the first time, a Quick Start Wizard guides you to set up regional settings, date and time, and password. For more information about these settings, see Chapter 13.
Getting Started 35 Auto configure the data connection settings The first time you power on your device, you will see a notification message from Connection Setup. Connection Setup automatically configures your device’s data connections, such as 3G/GPRS, WAP, and MMS, so that you do not need to enter the settings manually for your device. To automatically configure data connection settings 1. When you see the notification message from the Connection Setup, tap Yes.
Getting Started 1.6 Navigating Your Device There are different ways you can navigate and interact with the interface of your device. Finger-touch control A quick and easy way to interact with the home screen and the whole interface of your device is by touch.
Getting Started 37 The direction of swiping resembles the way you move a printed document as you are reading it. For detailed instructions, see “Finger scrolling” in Chapter 3. Slide Sliding on the touch screen also involves dragging with your finger, but you need to press and hold your finger with some pressure before you start to drag. While dragging, do not release your finger until you have reached the target position.
Getting Started Stylus You can use the stylus to navigate and interact with the touch screen. To use the stylus, pull it out from the stylus compartment at the bottom of the right panel of your device. If the backlight is off, removing the stylus automatically turns the backlight back on. The stylus is magnetic and sticks to the side when held close to the device. This prevents you from accidentally losing or misplacing the stylus.
Getting Started 39 The Navigation Control is also touch sensitive and can be used for zooming. Slide your finger clockwise around the Navigation Control to zoom in, counterclockwise to zoom out.
Getting Started 1.7 Home Screen The default home screen of the device is the TouchFLO™ 3D Home screen which allows finger-touch access to the most important functions such as contacts, text messages, e-mail, Internet, and more. For more information about using the TouchFLO 3D Home screen, see Chapter 3.
Getting Started 41 Tasks screen When you open the hardware keyboard while on the Home screen, a screen is shown letting you quickly start a task such as writing an e-mail or SMS message, creating a new appointment, opening the web browser, and more. Note If you do not have an e-mail account set up on your device, the E-mail setup wizard will open when you tap Email. 1.
Getting Started The following are some of the status icons that you may see on the device.
Getting Started 43 Icons that appear in this area GPRS available EDGE available HSPA available WCDMA/UMTS available Connected to a wireless network Connection is active Connection is not active Synchronization in progress
Getting Started Icons that appear in this area Icons that appear in this area GPRS connecting Vibrate mode GPRS in use Sound on EDGE connecting Sound off EDGE in use HSPA connecting Icons that appear in this area HSPA in use Battery charging WCDMA/UMTS connecting Battery full WCDMA/UMTS in use Maximum signal strength No signal Phone is turned off No phone service Searching for phone service Voice call in progress Call on hold Calls are forwarded Dialing while no SIM card is inserted No SI
Getting Started 45 1.9 Start Menu The Start menu, which can be opened from the top left corner of the screen, gives you access to all the programs and settings of your Windows Mobile-powered device. Touch or tap to select an item on the Start menu. Open the Start menu. Open a recently-used program. When you are on another screen, touch or tap this item to return to the TouchFLO 3D Home screen. Open a program. Access more programs. View and change settings. View Help information for the current screen.
Getting Started 1.10 Quick Menu The Quick menu, which can be opened from the top right corner of the screen, shows the currently running programs. You can quickly switch between running programs, stop programs, and see how much program memory is being used. Customize Task Manager settings. (See “Using Task Manager” in Chapter 13.) Stop all currently running programs. Touch this icon to open the Quick Menu. Shows the total percentage of program memory in use.
Getting Started 47 1.11 LED Alerts The buttons below the touch screen and the exterior edge of the Navigation Control which is an LED ring will light up in the following situations: Controls Light Behavior SEND button Light flashes when there is an incoming call. END button Light stays solid when there is an incoming call. Navigation Control • The LED ring shows a “breathing” white light when the battery is being charged. • The LED ring shows a solid white light when the battery is fully charged.
Getting Started 2. To switch between the Ring Volume and System Volume screens, touch Ring or System on top of the screen. 3. On either screen, you can do the following: • To increase or decrease the volume level, drag your finger up or down the volume bars. You can also press the VOLUME UP/DOWN buttons on the left panel of your device. Volume bars • Touch Vibrate to switch both System and Ring to Vibrate mode. • Touch Silent to mute both the system and ring volume. 4.
Getting Started 49 1.13 Using your Device as a USB Drive To easily carry media and other files with you, you can use your device’s storage card as a USB flash drive. Touch Start > Settings > Connections tab > USB to PC and then select Disk Drive mode. This allows you to copy files from your computer to the device’s storage card and vice versa faster. Note You need to have a storage card installed on your device to be able to use your device as a disk drive.
Getting Started
Chapter 2 Using Phone Features 2.1 Using the Phone 2.2 Voice Call 2.3 Video Call 2.4 Smart Dial 2.
Using Phone Features 2.1 Using the Phone Like a standard mobile phone, you can use your device to make, receive, and keep track of calls and send messages. The Phone screen To open the Phone screen, do one of the following: • On the Home screen, tap Phone. • Press the TALK/SEND ����������������� button. TALK/SEND button Enter your PIN Most SIM cards are preset with a PIN (personal identification number) that is provided by your wireless service provider. 1.
Using Phone Features 53 2.2 Voice Call Make a call To make a call from the Phone screen 1. On the Home screen, tap Phone. 2. Tap the keys on the keypad to enter the phone number. Tip If you tapped a wrong number, tap to erase each subsequent digit of a number. To erase the entire number, tap and hold . 3. Press the TALK/SEND ����������������������������������� button to place the call. Tip Note When in a call, use the VOLUME UP/DOWN buttons on the side of the device to adjust the phone volume.
Using Phone Features • Tap and hold the contact you want to call and then from the menu, select Call Work, Call Home, or Call Mobile. To make a call from the TouchFLO 3D Home screen Refer to Chapter 3 to learn how to make a call from the TouchFLO 3D Home screen. To make an emergency call Enter the international emergency number for your locale, and press the TALK/ SEND button on your device. Tip Additional emergency numbers may be included in your SIM card.
Using Phone Features 55 To answer or reject an incoming call • To answer the call, tap Answer, or press the TALK/SEND button. • To reject the call, tap Ignore, or press the END button. • To mute the ringing sound without rejecting the call, tap Mute Ring. Tip You can also place your phone face down on a table to mute the ring without rejecting the call.
Using Phone Features To put a call on hold Your device notifies you when you have another incoming call, and gives you the option of rejecting or accepting the call. If you are already on a call and accept the new call, you can choose to switch between the two callers, or set up a conference call between all three parties. 1. Tap Answer to take the second call, and put the first one on hold. 2. To end the second call and return to the first call, tap End Call or press END on your device.
Using Phone Features 57 To mute the microphone during a call Tap to toggle between turning on or off the microphone. When the microphone is turned off, the mute icon appears on the screen. To open Notes while in a call Tap or pull out the stylus. To vibrate the device when the call is established You can set the device to vibrate once to alert you that the call has been established with the other party. 1. On the Phone screen, tap Menu > Options >Advanced tab. 2.
Using Phone Features To check a missed call You will see the icon in the title bar when you missed a call. To check who the caller was, do one of the following: • Tap the title bar, then tap and then tap View. • On the Phone screen, tap Menu > Call History and then tap . Call History Use Call History to check for missed calls, dialed numbers, and calls received. To open the Call History screen, tap Menu > Call History on the Phone screen.
Using Phone Features 59 Turn the phone function on and off In many countries, you are required by law to turn off the phone while on board an aircraft. To enable or disable the phone function 1. Tap Start > Programs > Comm Manager. 2. On the Comm Manager screen, tap the Phone button to enable or disable the phone function. When enabled, the ON indicator is activated. To enable or disable Airplane Mode Another way to turn off the phone function is to switch your device to Airplane Mode.
Using Phone Features 2.3 Video Call Your device lets you make video calls when you are within a 3G network coverage area. You need to use a 3G-enabled SIM card to make video calls. Make a video call Do one of the following: • On the Phone keypad, tap the phone number to call, then tap Menu > Video Call to start a video call. • From Contacts, tap and hold the desired contact, and tap Video Call. • From Call History, tap and hold the desired phone number or contact, and tap Video Call.
Using Phone Features 61 End a video call Once a video call is in progress, tap End Call to hang up. Change settings While on a video call, you can change certain settings such as the size of the image, brightness of the video image, the camera to use, and more. The following shows the Video Call screen and control buttons during an ongoing call. 5 1 2 3 4 1 Image display area. Displays your image and the other party's image, depending on the selected Swap View setting. 2 Camera.
Using Phone Features Brightness To adjust the brightness of the live image, press NAVIGATION right to make it brighter or press NAVIGATION left to make it less bright. When you press NAVIGATION left or right during a video call, a brightness bar appears on the screen. Notes • You can also tap Menu > Brightness to adjust the brightness of the live image. • You cannot adjust the brightness for a still image.
Using Phone Features 63 General tab • Show still image. Select the image you want to display when you turn off the camera. • Preset (female). Displays a female picture in place of your image. • Preset (male). Displays a male picture in place of your image. • Custom image. Lets you use an image file as your display picture.
Using Phone Features Services tab To set up further calling options for Video Call, tap the Services tab. On the Services screen, select the desired service from the list, then tap Get Settings to access its settings. 2.4 Smart Dial Smart Dial makes it easy for you to dial a phone number.
Using Phone Features 65 If the matching list is long and you want to narrow down the search further, enter another letter. Using the same example above, if you continue to tap “3” which is associated with [d, e, f ], the matching list will be narrowed down to the following names: “Ben Miller”, “George Adams”, “Carter, Ellen”, “Dixon, Allan”. Make a call or send a text message using Smart Dial 1. On the Home screen, tap Phone. 2. Begin entering the first few numbers or characters.
Using Phone Features 2.5 Setting Up Bluetooth SIM Access for Car Kit Phones Bluetooth car kits that support the SIM Access Profile (SAP) can connect to your device and access its SIM card via Bluetooth. Once a SAP connection has been established, you can download SIM contacts from your device to the car kit phone. You can also use the car kit phone to answer and make calls using your device’s SIM card.
Chapter 3 TouchFLO™ 3D 3.1 About TouchFLO™ 3D 3.2 Using the TouchFLO 3D Home Screen 3.
TouchFLO™ 3D 3.1 About TouchFLO™ 3D TouchFLO™ 3D gives you touch control over your Windows Mobile-powered device. TouchFLO 3D provides the following features: • A Home screen that allows finger-touch access to the most widely-used functions, such as People, Messages, Mail, Music, Internet, and more • Allows you to use finger gestures to navigate screens 3.
TouchFLO™ 3D 69 • Press Navigation Right or Left to move to the next or previous tab. Press and hold your finger on the active tab, then slide your finger right or left over the tabs. Release when you have selected the desired tab. Note Apply some pressure when pressing and holding on the active tab to be able to slide over the tabs. • Swipe left across the screen to move to the next tab, and swipe right across the screen to move to the previous tab.
TouchFLO™ 3D Home The Home tab displays the current date, a flip-style clock, and an Alarm icon that indicates whether the alarm is on or off. Missed calls and your upcoming calendar appointments are also shown on the Home tab. To select an item on the Home tab • Touch the item; or • Press Navigation Up or Down first to navigate to the item you want to select and then press ENTER.
TouchFLO™ 3D 71 Touch the date or the flip clock to open the Clock & Alarms screen where you can set the date, time, and alarm. (See Chapter 13 for details.) Swipe upward on the screen to display the smaller digital clock and view more appointments. Touch this area to view details about missed calls in the Call History. (See Chapter 2 for details.) Home tab with flip clock One all-day appointment and up to two timed appointments can be displayed. Touch this area to create, edit or view an appointment.
TouchFLO™ 3D People On the People tab, you can add favorite contacts who you most frequently communicate with. This allows you to quickly make calls, send text messages, and send e-mails to your favorite contacts. Tip You can add up to 15 favorite contacts on the People tab. To add favorite contacts You should already have created or synchronized contacts on your device before you can add them to the People tab. 1. On the Home screen, slide your finger to the People tab. 2.
TouchFLO™ 3D 73 5. To add another favorite contact, touch the small Plus icon ( side of the screen and repeat steps 3 and 4. ) at the right To choose from your favorite contacts • Do any of the following: To flip through the contact pictures one at a time, swipe your finger up or down the screen. You can also press Navigation Up or Down to flip through the contact pictures.
TouchFLO™ 3D • Touch the picture of the contact on the center screen to access his or her contact card. On the contact card, you will see the last outgoing or incoming call as well as contact details such as phone numbers, e-mail address, and more. Tips • On the People tab, touch All People to access SIM contacts and all contacts that are stored on your device. • To remove the current favorite contact, touch Menu > Remove Favorite.
TouchFLO™ 3D 75 For more information about working with SMS and MMS messages, see “Text Messages” and “MMS” in Chapter 6. Mail The Mail tab is where you send and receive e-mail messages. Including Outlook E-mail, you can add up to four POP3/IMAP4 and web-based e-mail accounts in this tab. To add an e-mail account 1. On the Home screen, slide your finger to the Mail tab. 2. If this is your first time to add an e-mail account, touch New Account on the bottom-right side of the screen. 3.
TouchFLO™ 3D • To browse through received e-mails, swipe up or down on the envelope image or press Navigation Up/Down. • Touch the e-mail on the screen to open and read the message. Touch Inbox to access all e-mail messages of the currently selected account. After selecting an e-mail account, touch this icon to create and send a new e-mail message. These are your e-mail accounts. Touch an icon to select an e-mail account and view the new e-mails received in that account.
TouchFLO™ 3D 77 Internet On the Internet tab, you can open Opera Mobile™ to browse the web and add web favorites for one-touch access to your favorite web sites. Touch here to browse the web using Opera Mobile. Touch All Bookmarks to open Opera Mobile and add, view or delete web favorites. Swipe upward or press Navigation Down to scroll down the screen and access more web favorites. For more information about using Opera Mobile, see Chapter 8.
TouchFLO™ 3D To view photos and videos Touch here to take a photo. Touch the photo or video on the screen to view or play it in full screen. Touch here to open the Album program. (See “Viewing Photos and Videos Using Album” in Chapter 11 for details.) Touch here to shoot video. To flip through photos and videos, swipe upward/ downward, touch the Up/Down arrow, or press Navigation Up/Down. Touch Slideshow to view the photos as a slideshow. If a video is selected, touch Play.
TouchFLO™ 3D 79 To play music On the Music tab, flip through albums and all the music in each album, then touch the Play icon on the middle-right side of the screen to start playback. Touch here to go to the previous album or the previous music in the current album. Swipe upward/ downward on the screen or press Navigation Up/Down to flip through albums and the music or songs in an album. Touch here to play or pause. You can also press the ENTER button to play or pause.
TouchFLO™ 3D To move backward in the music, slide your finger counterclockwise. To set repeat and shuffle modes Touch Menu > Repeat and choose whether to repeat once, repeat all, or do not repeat. To toggle shuffle mode on and off, touch Menu > Shuffle and then select Shuffle On or Shuffle Off. The icons on the upper-right side of the Music tab show whether repeat and shuffle modes are enabled.
TouchFLO™ 3D 81 To use playlists You can group your favorite music into a playlist and then play back the playlist. • To create a new playlist: 1. Select the desired music on the Music tab or the Library. 2. Touch Menu > Add to Playlist. 3. Touch , enter a Playlist name and then touch OK. • To add more music files to a playlist: 1. On the Playlists tab, touch a playlist to open it. 2. Touch Menu > Edit. 3. Touch Menu > Add. 4.
TouchFLO™ 3D Custom playlists Windows Media® Player playlists Note If a Windows Media® Player playlist contains a combination of music, video and image files, only music files in the playlist will be synchronized to your device and other media types will be filtered out. Weather The Weather tab shows you the current weather as well as weather information for the next five days of the week. To add a city The Weather tab can display weather information of your local city and other added cities.
TouchFLO™ 3D 83 3. The Select City screen then appears. Flick your finger on the screen or use the random access bar on the right of the screen to choose the city. You can also slowly scroll through the city list by dragging your finger upward on the screen. Touch the desired city to select it. To view weather information Your device automatically connects to the Internet via the 3G/GPRS/EDGE data connection or Wi-Fi to download and display weather information.
TouchFLO™ 3D • Download weather automatically. When this option is selected, weather information is automatically downloaded from the AccuWeather web site whenever you select the Weather tab, if the data has not been updated within the last three hours. Weather data is also downloaded every time an ActiveSync connection is established (through over-the-air or USB connections). Clear this option if you prefer to manually download weather information. • Download weather when roaming.
TouchFLO™ 3D 85 Programs The Programs tab allows you to add your favorite programs for one-touch access. Touch an empty slot to add a favorite program. Touch All Programs to access all the programs of your device. Touch a program icon to open the corresponding program. Touch Remove to choose which program to remove from the Programs tab. When you have filled up the screen with programs, scroll down the Programs tab to access more empty slots and add more programs.
TouchFLO™ 3D 3.3 Finger Gestures You can use finger gestures to scroll, zoom and pan on the touch screen. Finger scrolling Finger scrolling can be used to scroll up and down web pages, documents, and lists such as the contacts list, file list, message list, calendar appointments list, and more. When finger scrolling, swipe or flick your finger on the touch screen. To scroll up and down • To scroll down, swipe your finger upward on the touch screen.
TouchFLO™ 3D 87 Finger zooming The type of finger gesture to use when zooming varies in different programs. • To zoom in on a web page in Opera Mobile, tap your finger twice on the screen. See “Using Opera Mobile” in Chapter 8 for details. • To zoom in on a photo in Album, make a full-circle swipe on the touch screen. See “Viewing Photos and Videos Using Album” in Chapter 11 for details.
TouchFLO™ 3D
Chapter 4 Entering Text 4.1 Entering Information 4.2 Using the Hardware Keyboard 4.3 Using the Full QWERTY 4.4 Using the Compact QWERTY 4.5 Using the Phone Keypad 4.6 Using Multitap and T9 Modes 4.7 Using Numeric and Symbol Mode 4.8 Using Block Recognizer 4.9 Using Letter Recognizer 4.
Entering Text 4.1 Entering Information When you start a program or select a field that requires text or numbers, you can either use the QWERTY keyboard or one of the on-screen input methods to enter information. QWERTY keyboard Your device comes with a QWERTY keyboard, which is similar to a standard keyboard on your PC. To use the keyboard, slide the screen panel to the right to reveal the keyboard. The screen orientation automatically switches to landscape mode when the keyboard is opened.
Entering Text 91 Key when pressed Input Panel (Full QWERTY) Input Panel icon Input Selector arrow Icon Notes Input method Icon Text input methods Input method Full QWERTY Letter Recognizer or Block Recognizer Compact QWERTY Transcriber Phone Keypad Keyboard • Some text input methods may not be available in certain language versions of the device. • When in landscape mode, the Compact QWERTY and Phone Keypad are not available.
Entering Text 4.2 Using the Hardware Keyboard You can do the following with the hardware keyboard: • To type lowercase letters and numbers, press the keys using your thumbs or fingers. • To use all uppercase letters, press press . To change back to all lowercase letters, again. • To use a single uppercase letter, press corresponding key.
Entering Text 93 • Press to open the Messaging program. • Press to open your SMS/MMS messaging account. • Press and hold , then press to open the T9 menu. 4.3 Using the Full QWERTY The Full QWERTY is a full on-screen QWERTY keyboard layout similar to a desktop PC keyboard. Tip You can also use the Windows Mobile on-screen keyboard which also has a QWERTY keyboard layout by selecting Keyboard (or Other Input Methods > Keyboard) on the Text input method menu. • Tap to enter letters or symbols.
Entering Text To enter text using the Full QWERTY 1. Start a program that accepts text input, such as Word Mobile. 2. Tap the Input Selector arrow, then tap Full QWERTY. 3. Start tapping keys on the keyboard as you would on a PC keyboard to enter your text. To learn how to enter text using T9 mode, see “Using Multitap and T9 Modes” in this chapter. 4.4 Using the Compact QWERTY The Compact QWERTY is a type of on-screen keyboard which features 20 keys.
Entering Text 95 Tip You can tap and hold to immediately open the numeric keyboard. To enter text using the Compact QWERTY 1. Start a program that accepts text input, such as Word Mobile. 2. Tap the Input Selector arrow, then tap Compact QWERTY. 3. Start tapping keys on the keyboard to enter your text. To learn how to enter text using Multitap or T9 mode, see “Using Multitap and T9 Modes” in this chapter. 4.
Entering Text Tip You can tap and hold to immediately open the numeric keyboard. To enter text using the Phone Keypad 1. Start a program that accepts text input, such as Word Mobile. 2. Tap the Input Selector arrow, then tap Phone Keypad. 3. Start tapping keys on the keyboard to enter your text. To learn how to enter text using Multitap or T9 mode, see “Using Multitap and T9 Modes” in this chapter. 4.
Entering Text 97 Note Navigate through the word candidate list if there are more words to choose from. To add a word to the T9 dictionary If the word that you have entered is not found in the dictionary, you can add it to the dictionary. 1. While in T9 mode, type a letter and then tap candidate list. on right side of the word 2. Type the word you want to add and then tap ADD. Tap to not add the word. To customize Touch Input settings 1. Tap the Input Selector arrow, then tap Touch Input Settings. 2.
Entering Text 4.7 Using Numeric and Symbol Mode Switch to Numeric and Symbol mode to let you easily enter numbers and common symbols such as parentheses, braces, currency signs, punctuation marks, special characters, and more. Numeric and Symbol mode is available when using the Full QWERTY, Compact QWERTY, and Phone Keypad. Tap a number or symbol to insert it into your text. Tap to go to the previous or next page of symbols. See “To lock the keyboard in Numeric and Symbol mode.
Entering Text 99 Tip In Compact QWERTY and Phone Keypad, tap / to toggle between locking the keyboard in Numeric and Symbol mode and switching back to the letter keyboard layout after tapping a symbol or number. 4.8 Using Block Recognizer With Block Recognizer, you use a single stroke to write letters, numbers, symbols, and punctuation, which are then converted into typed text. To use Block Recognizer 1. From a program, tap the Input Selector arrow and then tap Other Input Methods > Block Recognizer. 2.
Entering Text 4.9 Using Letter Recognizer With Letter Recognizer, you can write individual letters, numbers, and punctuation marks, which are then converted into typed text. To use Letter Recognizer 1. From a program, tap the Input Selector arrow and then tap Other Input Methods > Letter Recognizer. 2. Write characters, numbers, and symbols in the designated writing area. • Enter uppercase letters by writing in the ABC (left) area of the box.
Entering Text 101 To enter punctuation and symbols Transcriber comes with an on-screen keyboard that provides an easy way to add punctuation or a special symbol to existing text. To use this on-screen keyboard, tap on the Transcriber toolbar. The keyboard remains visible until you tap the button again. Tips • To reposition the keyboard, tap and hold the title bar, then drag to the desired location.
Entering Text
Chapter 5 Synchronizing Information With Your Computer 5.1 About Synchronization 5.2 Setting Up Windows Mobile® Device Center on Windows Vista® 5.3 Setting Up ActiveSync® on Windows XP® 5.4 Synchronizing With Your Computer 5.5 Synchronizing via Bluetooth 5.
Synchronizing Information With Your Computer 5.1 About Synchronization You can take information from your computer wherever you go by synchronizing them to your device.
Synchronizing Information With Your Computer 105 Bluetooth. For more information about setting up a Bluetooth partnership, see Chapter 9. For information about synchronizing through Bluetooth, see “Synchronizing via Bluetooth” later in this chapter. Try to synchronize regularly in order to keep information up-to-date in both your device and your computer. Notes • You can also synchronize Outlook e-mail, contacts, calendar, and tasks on your device with the Exchange Server at your work.
Synchronizing Information With Your Computer 3. On the Windows Mobile Device Center’s Home screen, click Set up your device. Note Choose Connect without setting up your device if you only want to transfer media files, check for updates, and explore your device but not synchronize Outlook information. 4. Select the items you want to synchronize, then click Next. 5. Enter a device name, then click Set Up.
Synchronizing Information With Your Computer 107 On Windows Mobile Device Center, you can do the following: • Click Mobile Device Settings to change synchronization settings. • When you click Pictures, Music and Video > XX new pictures/video clips are available for import, a wizard guides you to tag and transfer photos from your device to the Photo Gallery on your computer.
Synchronizing Information With Your Computer 5.3 Setting Up ActiveSync® on Windows XP® The Getting Started disc that comes with your device contains Microsoft ActiveSync 4.5 or later. Follow the steps in this section to install and set up ActiveSync on Windows XP or other compatible Windows systems. Note For a list of compatible Windows systems, go to http://www.microsoft.com/windowsmobile/activesync/activesync45.mspx. Install ActiveSync 1.
Synchronizing Information With Your Computer 109 When you finish the wizard, ActiveSync synchronizes your device automatically. Notice that Outlook e-mails and other information appear on your device after synchronization. 5.4 Synchronizing With Your Computer Connect and synchronize your device with your computer using the USB cable or Bluetooth connection. Start and stop synchronization You can manually synchronize either from your device or computer.
Synchronizing Information With Your Computer Change which information is synchronized You can change the information types and the amount of information to synchronize for each type either on your device or your computer. Follow the steps below to change synchronization settings on your device. Note Before changing synchronization settings on your device, disconnect it from your computer. 1. In ActiveSync on your device, tap Menu > Options. 2.
Synchronizing Information With Your Computer 111 Troubleshoot sync connection problem In some cases, when the computer connects to the Internet or a local network, it may disconnect the connection with your device in favor of the Internet or network connection. If this happens, tap Start > Settings > Connections tab > USB to PC, then clear the Enable advanced network functionality check box. This makes your computer utilize a serial USB connection with your device. 5.
Synchronizing Information With Your Computer 5.6 Synchronizing Music and Video If you want to carry your music or other digital media along with you while you travel, set up Windows Media® Player on your computer to synchronize music and video with your device. Other than selecting the Media information type to be synchronized, all media synchronization settings must be set in Windows Media® Player.
Chapter 6 Exchanging Messages 6.1 Messaging 6.2 Text Messages 6.3 MMS 6.4 Types of E-mail Accounts 6.5 E-mail Setup Wizard 6.
Exchanging Messages 6.1 Messaging Messaging is a central location where you will find all types of messaging accounts, which include text messages (SMS), multimedia messages (MMS), and e-mail accounts. To select a messaging account Do one of the following: • On the TouchFLO 3D Home screen, slide to the Mail tab and then touch Menu > Accounts > Accounts. The Account Picker screen then opens where you can select an account. Tip You can also tap Start > Messaging to access the Account Picker screen.
Exchanging Messages 115 4. Select the Use signature with this account check box. 5. In the provided text box, enter the information that will be displayed as your signature. 6. If you want the signature to be added whenever you reply or forward messages, select the Use when replying and forwarding check box, then tap OK. 7. Repeat the steps to add a signature to other messaging accounts. 6.2 Text Messages Send short text messages (SMS) up to 160 characters long to other mobile phones.
Exchanging Messages From the Contacts screen 1. Tap Start > Contacts. 2. Tap the contact’s name to open his or her contact card. 3. Touch Send text message. Compose and send a text message After creating a new text message, follow the steps below to enter your message and then send it. 1. To add recipients, enter their mobile phone numbers in the To field, separating them with a semicolon. You can also tap To or tap Menu > Add Recipient to add mobile phone numbers from Contacts�. 2.
Exchanging Messages 117 To reply to a text message 1. In the SMS \ MMS inbox, tap a message thread to open it. 2. At the bottom of the screen, type your reply message and then tap Send. Enter your reply message here To copy a message in the thread to the SIM card 1. In the SMS \ MMS inbox, tap the message to open it. 2. Use the Navigation Up or Down control to select a message in the thread that you want to copy to the SIM card. Note You cannot copy a sent message from the thread to the SIM card.
Exchanging Messages To copy a text message from the SIM card to the device 1. In the SMS \ MMS inbox, select the SIM message you want to copy. 2. Tap Menu > Copy to Phone. Note Copying SIM text messages to your device results in duplicate messages in the Inbox folder when your SIM card is in use. To delete a message in the thread 1. In the SMS \ MMS inbox, tap a message thread to open it. 2. Use the Navigation Up or Down control to select a message in the thread that you want to delete. 3.
Exchanging Messages 119 6.3 MMS Sending multimedia messages (MMS) to your friends and family is fun and easy. You can include pictures, videos, and audio clips in a multimedia message. Notes • Multimedia messaging is a charged service and has to be provisioned on your mobile phone account. Contact your wireless service provider to have MMS provisioned as part of your calling plan. • Make sure the size of MMS messages that you send is within the limits allowed by your wireless service provider.
Exchanging Messages • Gateway. Location of the MMS server, which is usually in the form of an IP address. • Port number. HTTP port number used for connecting to the MMS server and for file transfer. • Server address. URL address of the server where MMS messages are stored. • Connect via. Select the connection that your device uses for MMS messages. • Send limit. Select the maximum MMS message size allowed by your wireless service provider. • WAP version. Select either WAP 1.2 or WAP 2.
Exchanging Messages 121 3. In To, enter the recipient’s phone number or e-mail address directly, or tap To, Cc, or Bcc to choose a phone number or an e-mail address from Contacts. Note You may need to scroll up to see Cc and Bcc. 4. Enter a subject for your message. 5. Tap the Insert icon ( )to select and insert a photo or video clip. When selecting a photo or video clip, you can: • Tap Select to insert the selected photo or video clip into the MMS message you are composing.
Exchanging Messages To add text to an MMS message When you tap Insert text here on your MMS message, an empty screen appears where you can enter your text. You can insert the following types of information: Enter your own text Choose from common words or phrases from the My Text list Include a Favorites link Add an emoticon Tip Insert contact information Insert calendar appointment To edit or delete a phrase on the My Text list, tap and hold a string, then tap Edit or Delete from the shortcut menu.
Exchanging Messages 123 Note To record a new audio clip and add it to your MMS message, tap . The Record popup window then opens. Tap Record to start recording, and Stop to end the recording. Tap Play to listen to the recorded audio clip, then tap Add. The new audio clip is then inserted into your MMS message. View and reply to MMS messages To view an MMS message • Use the playback controls , , and . • Tap Contents to see a list of files included in the message.
Exchanging Messages To block a phone number from sending you MMS messages If you do not want to receive MMS messages from a particular sender, you can add the sender’s phone number to the MMS Blacklist. 1. When you receive a new MMS message, open and view the message. 2. To avoid receiving MMS messages from this sender next time, tap Menu > Show > Message Detail. 3. On the Message Detail screen, tap Menu > Show Contact Details. 4. Tap Menu > Save to Blacklist. 5. Tap Done.
Exchanging Messages 125 Set up your device to synchronize Outlook e-mail with the computer If you have installed the synchronization software on your computer and created a partnership with your device, then your device is ready to send and receive Outlook e-mail. If you have not yet installed the synchronization software nor created a partnership, do so by following the procedures in Chapter 5.
Exchanging Messages 6.5 E-mail Setup Wizard Windows Mobile’s E-mail Setup wizard walks you through the process of setting up your e-mail account. It has an Auto Setup feature which can automatically set up your e-mail account based on the e-mail address and password that you enter, if your e-mail provider settings are preconfigured on your device.
Exchanging Messages 127 4. Enter Your name and the Account display name and then tap Next. Note If the E-mail Setup wizard was unsuccessful in finding and downloading settings from the Internet, select Internet e-mail from the Your e-mail provider list on the next screen. You will be asked to enter e-mail server settings. See “To specify e-mail server settings” for details. 5.
Exchanging Messages To customize download and format settings Before you tap Finish when setting up your POP3 or IMAP4 e-mail account, you can tap the Review all download settings link at the bottom of the screen to choose download options, message format, and other settings.
Exchanging Messages 129 Set up a custom domain e-mail When you are using an e-mail domain name that is hosted by a different e-mail provider (for example, your e-mail address may be Benjamin@startup.com but Email.com hosts the e-mail account and provides e-mail services), select the Custom Domain option in the E-mail Setup wizard to set up your e-mail account on your device. 1. Add a new e-mail account. See “Add an e-mail account” for instructions. 2.
Exchanging Messages 6.6 Using E-mail After setting up e-mail accounts on your device, you can start sending and receiving e-mail messages. Create a new e-mail message Depending on your preference, there are two ways you can create a new e-mail message. To start from an empty message 1. On the TouchFLO 3D Home screen, slide to the Mail tab. 2. Select the e-mail account you want to use on the right side of the screen.
Exchanging Messages 131 Compose and send an e-mail After creating a new e-mail, follow the steps below to enter your message and then send it. 1. To add recipients, enter their e-mail addresses, separating them with a semicolon. You can also tap To if you want to add e-mail addresses stored in Contacts. 2. Enter a subject and compose your message. Tip To choose from preset messages, tap Menu > My Text and tap a desired message. To check the spelling, tap Menu > Spell Check. 3. Tap Send.
Exchanging Messages For example, entering “B”, then “E” narrows the list to only the e-mails that contain sender names and e-mail subjects that start with “BE.” View and reply to messages To download a complete e-mail By default, each e-mail received in the inbox on your device contains only the first few kilobytes of the message. When you open an e-mail, it displays only the headers and part of the message. You must download the whole e-mail to view the complete content.
Exchanging Messages 133 Fetch Mail is also available for Outlook E-mail. See “Instant download through Fetch Mail” in Chapter 7 for details. • Download may take some time, depending on the speed of your Internet connection, size of the whole e-mail, and whether file attachments are automatically downloaded. To download file attachments • POP3 e-mail account: File attachments of a POP3 Internet e-mail account are automatically downloaded when you download a complete e-mail.
Exchanging Messages Synchronize e-mails Synchronizing e-mails ensures that new e-mails are downloaded to the device Inbox folder, e-mails in the Outbox folder are sent, and e-mails deleted from the server are removed from your device. The manner in which you synchronize e-mails depends on the type of e-mail account you have. To automatically synchronize an Outlook e-mail account 1. Connect your device to your computer through USB or Bluetooth.
Exchanging Messages 135 To change the download size and format for Internet e-mail 1. Tap Menu > Options on the Account Picker screen, or tap Menu > Tools > Options while you’re in a message list. 2. Tap your POP3 or IMAP4 Internet e-mail account. 3. Tap Download Size Settings. 4. Under Message format, select HTML or Plain Text. 5. Under Download size limit, select the desired e-mail size. 6. Tap Done. To automatically receive attachments on Outlook e-mails 1. Tap Start > Programs > ActiveSync. 2.
Exchanging Messages
Chapter 7 Working With Company E-mails and Meeting Appointments 7.1 Synchronizing with the Exchange Server 7.2 Working With Company E-mails 7.3 Managing Meeting Requests 7.
Working With Company E-mails and Meeting Appointments 7.1 Synchronizing with the Exchange Server To keep up-to-date with your company e-mails and meeting schedules while you’re out of the office, you can connect your device to the Internet through Wi-Fi or a data connection and synchronize with your company’s Exchange Server. Set up an Exchange Server connection Before you can synchronize or access information on the Exchange Server, you need to set up an Exchange Server connection on your device.
Working With Company E-mails and Meeting Appointments 139 9. Select the items that you want to sync with the Exchange Server. Tips • To change synchronization settings of an information item, for example, E-mail, select the item, then tap Settings. • To change the rules for resolving synchronization conflicts, tap Menu > Advanced. 10. Tap Finish.
Working With Company E-mails and Meeting Appointments 7.2 Working With Company E-mails Your device gives you instant access to your company e-mails and lets you manage your messages easier. Direct Push, Fetch Mail, Remote e-mail search, and e-mail flags are just some of the tools you can use to manage your e-mails. Note Some messaging features depend on the Microsoft Exchange Server version used in your company. Check with your network administrator for the availability of these features.
Working With Company E-mails and Meeting Appointments 141 To turn on Direct Push in ActiveSync 1. Tap Start > Programs > ActiveSync and then tap Menu > Schedule. 2. Select As items arrive in the Peak times and Off-peak times boxes. Note When Direct Push is off, you need to manually retrieve your e-mails. Scheduled synchronization If you do not want to use Direct Push, you can set a regular schedule for synchronizing Outlook e-mail and information. 1.
Working With Company E-mails and Meeting Appointments 3. By default, only the first few words of the message is shown. To download the whole e-mail, finger-scroll to the end of the message, then tap Get the rest of this message. 4. Wait for the remainder of the message body to download. Notes • For information about changing e-mail sync options such as setting the download size for e-mail, see "Customize e-mail settings" in Chapter 6.
Working With Company E-mails and Meeting Appointments 143 Flag your messages Flags serve as a reminder for you to follow-up on important issues or requests contained in e-mail messages. Flagging messages, which has been a useful feature on desktop Outlook E-mail, can also be done in Outlook Mobile on your device. You can flag received e-mail messages on your device. Requirement Flags are enabled only if e-mails are synchronized with Microsoft Exchange Server 2007 or higher.
Working With Company E-mails and Meeting Appointments Out-of-office auto-reply Outlook Mobile allows you to retrieve and change your out-of-office status. Just like desktop Outlook E-mail, Outlook Mobile automatically sends an autoreply message when you’re not available. To send out-of-office auto-reply messages 1. Tap Start > Messaging > Outlook E-mail. 2. Tap Menu > Tools > Out of Office. 3. In the I am currently list, select Out of the Office. 4. Enter your auto-reply message, then tap Done.
Working With Company E-mails and Meeting Appointments 145 • If the time of the meeting conflicts with your other appointments, a “Scheduling Conflict” status appears on top of the e-mail. 3. Choose whether or not to edit your response e-mail before sending, then tap OK. If you accepted the meeting request, it will automatically be added as an appointment in Calendar on your device. To view the list of meeting participants 1. Tap Start > Calendar. 2.
Working With Company E-mails and Meeting Appointments • To view an attendee’s contact information, tap the attendee’s name. If the attendee is included in your contacts list, you will see the contact information immediately. If the attendee is not in your contacts list, tap Company Directory to view the contact information. 7.4 Finding Contacts in the Company Directory In addition to having contacts on your device, you can access contact information from your organization’s Company Directory.
Working With Company E-mails and Meeting Appointments 147 • When creating a meeting request and selecting required and optional attendees in Calendar, tap Company Directory. 3. Enter a partial or full contact name and tap Search. In the search results list, tap a contact to select it. Notes • You can save a contact from the Company Directory to your device by selecting the contact, then tapping Menu > Save to Contacts.
Working With Company E-mails and Meeting Appointments
Chapter 8 Internet 8.1 Ways of Connecting to the Internet 8.2 Starting a Data Connection 8.3 Using Opera Mobile™ 8.4 Using YouTube™ 8.5 Using Streaming Media 8.6 Using Windows Live™ 8.7 Using Your Device as a Modem (Internet Sharing) 8.
Internet 8.1 Ways of Connecting to the Internet Your device’s networking capabilities allow you to access the Internet or your corporate network at work through one of the following connections: • Wi-Fi • GPRS, 3G or EDGE • Dial-up Note You can also add and set up the following connections: • VPN: A VPN connection is used to access your corporate network by using an existing Internet connection.
Internet 151 1. The network names of the detected wireless networks are displayed on a pop-up message window. Tap the desired wireless network, then tap OK. Note When you select an open (unsecured) network, you will be automatically connected to the network after tapping OK. You do not need to do steps 2 and 3. 2. On the next pop-up message window, do one of the following: • Tap The Internet if the wireless network connects your device to the Internet.
Internet To check wireless network status You can check the current wireless connection status from any of the following screens of your device: • Title bar. When you enable Wi-Fi on your device, the Wi-Fi ON icon title bar. appears on the After Wi-Fi is turned on, your device scans for available wireless networks and the wireless signal icon appears on the title bar. The arrows in this icon move back and forth while your device is scanning for a wireless network signal.
Internet 153 • Configure Wireless Networks screen. On the Home screen, slide to the Settings tab and then tap All Settings. In the Connections tab, tap Wi-Fi. This screen displays the wireless networks currently available. To connect to a wireless network in the list, tap and hold on the desired network, then tap Connect. Tap a wireless network in the list to view or change its connection settings. You can also add new wireless networks, if available, by tapping Add New.
Internet GPRS/3G Use GPRS/3G (or EDGE, if available) to connect to the Internet and to send and receive e-mail and picture messages on your device. You will need a data plan to use your wireless service provider’s GPRS/3G network. Check with your wireless service provider to find out about GPRS/3G rates. GPRS/3G settings are already preconfigured on your device, and your device is ready to use your wireless service provider’s GPRS/3G services.
Internet 155 6. Enter the Access point name, then tap Next. 7. Enter the user name and password, if required, then tap Finish. Notes • To view help information for any screen, tap the help icon ( • To modify your connection settings, tap Manage existing connections and then tap Edit. ). Dial-up To set up a dial-up connection to your Internet Service Provider (ISP) on your device, you need the same settings that you normally use when you dial up from your computer.
Internet 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. On the Connections tab, tap Connections. 3. Tap Manage existing connections. 4. Tap and hold the name of the desired connection, then tap Connect. To disconnect active data connections 1. Tap Start > Programs > Comm Manager. 2. Tap the Data Connection button. Note You cannot reconnect a data connection in Comm Manager. 8.
Internet 157 1 Refresh. Tap to reload the web page being viewed. 2 Address bar. Enter the URL of the web site here. 3 Back. Tap to go back to the previous web page viewed. 4 Bookmarks. Tap to go to the Bookmarks screen where you can add a bookmark, edit bookmarked web pages, and send the favorite URL link via one of the Messaging accounts. 5 Tabs. Tap to add a new browsing tab or switch to another existing browsing tab. 6 Home. Tap to go to the Home page. 7 Menu.
Internet View web pages While browsing web pages, use finger gestures to pan and zoom on the web page. To zoom in, tap your finger twice on the screen. To zoom out, tap your finger twice on the screen again. Tip Touch and hold an empty area on a web page to open a shortcut menu that lets you go back to the previous page, reload the page, add the page as a Favorite, and more. You can also tap and hold a link or image on a web page to open a menu with different options.
Internet 159 Tap to open the Settings screen where you can set the default home page, change display settings, set privacy settings, and more. Tap to view items being downloaded. You can also resume or stop current downloads. Tap to view information about the Web page you are browsing. Tap to see web pages that you have viewed. Tap to manage and view web pages that you have saved. Tap to open the Opera Mobile help file. Tap to close Opera Mobile completely. Opera Mobile will not run in the background.
Internet Tap to open the Program Displays the current program Guide list. The Program channel being viewed. Guide list only appears if you Tap to set video are subscribed to a channel. playback quality. Tap the arrows to filter the list by Most Viewed, Top Rated, and Featured. Tap to switch between the different YouTube screens. Browse for videos Tap to close the YouTube. Displays the available videos for the selected program channel. Tap a video to watch it. Tap to view details about the video.
Internet 161 To add a new program channel into the Program Guide list 1. On the YouTube screen, tap . 2. On the Search screen, enter the channel you want to add to the Program Guide list. 3. Tap Search. YouTube searches for the channel and then displays the available videos from it. 4. Tap and then on the confirmation screen, tap OK. The channel you just subscribed to will now be shown when you tap Program Guide. Tip You can also add a YouTube user as a program channel.
Internet Watching videos On the Videos, Bookmarks, or History screen, tap a video to launch the YouTube Video Player. Drag to go forward or backward in the video. Download progress Buffered video Tap to go back to the beginning of the video. . Tap to toggle between playing and pausing the video. Tip Tap to stop the video playback. Tap to resize the video to fit the screen. Tap again to go back to actual size. To adjust the volume, press the VOLUME CONTROLS on the side of the device.
Internet 163 This control Does this NAVIGATION left (Landscape orientation) Press and hold to go back in the video VOLUME BUTTONS Press to adjust the volume. When you tap Stop ( ) or finish watching the entire video, you are presented with options on what you can do next. Tap to go to the next page of related videos. If no action is taken, it automatically goes to the next page after 10 seconds. Tap to view details about the video you just watched.
Internet Bookmarks You can store frequently viewed videos into Bookmarks for quick access. To view Bookmarks On the YouTube screen, tap watch it. . Tap a video to To add a video into Bookmarks Do one of the following: • After watching a video, tap . • On the list of videos, tap on the video you want to add to Bookmarks and then tap . To delete a video from Bookmarks 1. On the Bookmarks screen, tap Edit. 2. Tap on the video you want to remove from Bookmarks. 3.
Internet 165 Note To clear the History list, tap Clear. 8.5 Using Streaming Media Streaming Media lets you stream live broadcasts or on-demand media content from the web. The media is sent in a continuous stream to your device and is played as it arrives, along with the audio. The Streaming Media program allows you to play 3GP and MPEG-4 files. It also supports playback of SDP (Session Description Protocol) files.
Internet 3. On the web page, tap the RTSP link. 4. Streaming Media then automatically opens and starts playing the file. During playback, use the button controls to play/pause, switch to full screen, rewind, and fast forward. Rewind Drag to go backward or forward on the video. Tap to toggle between playing or pausing the video playback. Tap to switch to full screen mode. In full screen mode, tap the screen to switch back.
Internet 167 To view streaming video information Tap Menu > Properties to view the properties and general information of a streaming video clip, such as video codec, audio codec, dimension, frames, and duration of the video. To configure streaming video connection settings Tap Menu > Options to configure the following settings: • Connect via. Choose whether you want to connect to the Internet or corporate network (intranet) to locate a streaming video clip. • UDP port range.
Internet To set up Windows Live™ for the first time 1. Tap Start > Programs > Windows Live and then tap Sign in to Windows Live. 2. Tap the links to read the Windows Live™ Term of Use and the Microsoft Privacy Statement. After reviewing them, tap Accept. 3. Enter your Windows Live™ Mail or Hotmail address and password, select the Save password checkbox, then tap Next. 4. Tap Next. 5. Choose what information you want to sync online with your device.
Internet 169 The Windows Live™ interface On the Windows Live™ main screen, you will see a search bar, navigation buttons, and an area where you can show and customize your profile. 1 1 Search bar 2 Navigation buttons. Tap the left or right arrow to switch between Windows Live™ Messenger, Windows Live™ Mail, and Sync status. 3 Tap to change the display name, picture, or personal message. 4 Tap Menu to access and change settings.
Internet • • • • • • • Instant messaging via text and voice Multiple conversations Insert emoticons Contact list with presence Send and receive files including photos Change status/display name View contacts by online status, groups, and more • Send messages even when a contact is offline Note Before you can use Windows Live™ Messenger, your device must be connected to the Internet.
Internet 171 To start and end conversations 1. In the contact list, select a contact, then tap Send IM to open a message screen. 2. Enter your text message in the text entry area of the message screen. 3. To add an emoticon, tap Menu > Add emoticon then tap an icon from the list. 4. Tap Send. 5. To end a conversation with the current contact, tap Menu > End conversation. Tips • To send a file, tap Menu > Send. You can choose to send a picture, voice clip or any file.
Internet Tip You can fill in other information about the contact, if desired. This is not necessary if you will communicate with the contact only through Windows Live™ Messenger or Live Mail. 4. Tap OK. 5. Follow the remaining instructions to add the new contact to your Windows Live™ contact list. 8.7 Using Your Device as a Modem (Internet Sharing) Internet Sharing connects your desktop or notebook computer to the Internet by using your device’s data connection (GPRS or EDGE, for instance).
Internet 173 To set up your device as a USB modem 1. On your device, tap Start > Programs > Internet Sharing. 2. In the PC Connection list, select USB. 3. In the Network Connection list, select the name of the connection that your device uses to connect to the Internet. 4. Connect your device to the computer using the USB cable. 5. Tap Connect.
Internet For Windows Vista: a. Click Start > Control Panel > Network and Internet > Network and Sharing Center. b. Click Manage network connections and then under Personal Area Network, double-click Bluetooth Network Connection. c. In the Bluetooth Personal Area Network Devices dialog box, select your device, then click Connect. For Windows XP: a. Tap Start > Control Panel > Network Connections. b. Under Personal Area Network, click the Bluetooth Network Connection icon. c.
Internet 175 8.8 Using RSS Hub RSS Hub is an RSS reader that keeps you up-to-date with the latest news from the Internet. It monitors Internet news channels and downloads the most current news updates and podcasts so you are instantly informed of breaking news and events. For more information and tips on using RSS Hub, see Help on your device. Note Make sure you have an active Internet connection (such as EDGE or GPRS) before using RSS Hub.
Internet Note If the RSS channel you want to subscribe to is not in the list of known channels, tap Back, then select another option on the New Channel Wizard screen. For more information on these other options, see the Help on your device. 3. Select the checkboxes of the RSS channels you want to subscribe to, then tap Finish. Tip Channels are grouped by categories. If you want to select all channels in a category, select the category check box. 4. The channel list appears.
Internet 177 To filter the channels in the display In the channel list, tap Menu > View, then select: • Updated to display only those channels with unread headlines. • All to display all subscribed channels. Manage channel categories To view all the channels in a particular category, tap All Categories in the upper left area of the channel list, then tap the category you want to display. To add a new category, tap Menu > Categories in the channel list to display all categories, then tap Menu > New.
Internet New or unread headlines display in bold and are marked with a blue newspaper icon. Headlines that have been read are marked with a gray newspaper icon. View the news summary Tap a headline in the headline list to display the news summary. Channel name Headline and read status Audio/Video/Image file attachment. Tap to download the file. News summary Tap to open the news item in Opera Mobile. See “Using Opera Mobile” in this chapter for details.
Internet 179 To download, play, or save podcasts 1. When you see an audio or video file attachment in the news summary, do one of the following to download the file: • Tap Menu > Podcasts > Start Download. • Tap the Download audio/Download video link below the audio/video file icon. Tip To cancel the file download, tap Menu > Podcasts > Cancel Download, or tap Cancel download below the audio/video file icon. 2.
Internet To view the next or previous news summary In the news summary screen, tap Menu > Next or Menu > Previous, or press NAVIGATION left or right. For more information about the features and configuring RSS Hub, refer to the online help. To open the online help, tap Start > Help while in RSS Hub.
Chapter 9 Bluetooth 9.1 Bluetooth Modes 9.2 Bluetooth Partnerships 9.3 Connecting a Bluetooth Hands-free or Stereo Headset 9.4 Beaming Information Using Bluetooth 9.5 Bluetooth Explorer and Bluetooth File Sharing 9.
Bluetooth 9.1 Bluetooth Modes Bluetooth is a short-range wireless communications technology. Devices with Bluetooth capabilities can exchange information over a distance of about eight meters without requiring a physical connection. Bluetooth on your device operates in three different modes: • On. Bluetooth is turned on. Your device can detect other Bluetooth-enabled devices, but not vice versa. • Visible. Bluetooth is turned on, and all other Bluetooth-enabled devices can detect your device. • Off.
Bluetooth 183 9.2 Bluetooth Partnerships A Bluetooth partnership is a relationship that you create between your device and another Bluetooth-enabled device in order to exchange information in a secure manner. To create a Bluetooth partnership 1. On the Home screen, slide to the Settings tab and then tap Menu > Bluetooth Devices > Devices tab. 2. Tap Add new device. Your device displays the names of other Bluetooth devices within range. 3. Tap the device name in the box, then tap Next. 4.
Bluetooth To accept a Bluetooth partnership 1. Ensure that Bluetooth is turned on and in visible mode. 2. Tap Yes when prompted to establish a partnership with the other device. 3. Enter a passcode (the same passcode that is entered on the device requesting the partnership) to establish a secure connection. The passcode must be between 1 and 16 characters. 4. Tap Next. 5. Tap Done. You can now exchange information with the paired device.
Bluetooth 185 3. Tap the name of the Bluetooth headset, then tap Next. The device will automatically pair the device with the Bluetooth headset. Windows Mobile will automatically try one of the preconfigured passcodes (0000, 1111, 8888, 1234) to pair the Bluetooth headset with the device. If this fails, you have to enter the passcode delivered with your headset manually. Note If the Bluetooth stereo headset becomes disconnected, turn the headset on and repeat step 1 to 2 above.
Bluetooth a. On your computer, open Bluetooth Devices from the Control Panel, then click the Options tab on the Bluetooth Devices window. b. For Windows Vista, select Allow Bluetooth devices to find this computer. For Windows XP, select Turn discovery on and Allow Bluetooth devices to connect to this computer. c. Create a Bluetooth partnership between your device and computer. For information about creating a partnership, see “Bluetooth partnerships”. d.
Bluetooth 187 9.5 Bluetooth Explorer and Bluetooth File Sharing Bluetooth Explorer searches for other Bluetooth devices that have file sharing enabled and lets you access their Bluetooth shared folder. You can copy files from and to their shared folder, and create subfolders in it. When you enable Bluetooth file sharing on your device, other Bluetooth-enabled devices will also be able to access your Bluetooth shared folder. To enable Bluetooth Explorer and Bluetooth file sharing on your device 1.
Bluetooth 2. Bluetooth Explorer then scans for other Bluetooth devices that have file sharing enabled. From the list, tap to select a Bluetooth device you want to connect to. You may need to enter a passcode in order for you to connect to the selected device. If there are files contained in the Bluetooth shared folder on the other device, you will be able to see them on the Bluetooth Explorer screen. 3. Select one or more files, then tap Menu > Edit and choose to cut or copy the files. 4.
Bluetooth 189 To print contact information 1. On the Home screen, slide to the People tab and then tap All People. 2. Select the contact whose information you want to print. 3. Tap Menu > Print via Bluetooth > Menu > Search Devices. Your device starts to search for Bluetooth devices. 4. Select the Bluetooth printer and tap Menu > Send File. 5. Set the printing options you want, then tap Print. To print a calendar appointment 1.
Bluetooth
Chapter 10 Navigating on the Road 10.1 Google™ Maps (Available by Country) 10.2 Guidelines and Preparation for Using GPS 10.
Navigating on the Road 10.1 Google™ Maps (Available by Country) Google™ Maps lets you track your current location, view real-time traffic situations, and receive detailed directions to your destination. It also provides a search tool where you can locate places of interest or an address on a vector or a satellite map. Note You need an active data connection or Wi-Fi connection to use Google Maps. Open Google Maps Tap Start > Programs > Google Maps.
Navigating on the Road 193 Search for a place of interest You can search and locate a place of interest using Google Maps. Google Maps also shows the contact information and gives directions on how to get to the place of interest from your current location. Note You can also search for keywords, addresses, and postal codes. 1. On the Google Maps screen, tap Search. 2. Enter the place of interest you want to go to (for example, museums in London), then tap OK. 3.
Navigating on the Road • Tap Directions to here or Directions from here to get directions on how to get to the place of interest from your current location or vice versa. • Tap Search nearby to search for other places of interest near your current location. • Tap Send as text message to send the contact information to a contact saved on your device via SMS. For more information about Google Maps, go to http://www.google.com/gmm/ index.html. 10.
Navigating on the Road 195 1 Do not place where it will block the driver’s vision. 2 Do not place where air bags could deploy. 3 Do not place anywhere in the vehicle without securing the device in the holder. • Please use the GPS system cautiously. Users shall be liable for any damages resulting from negligent operation of the system. • The GPS signal cannot pass through solid non-transparent objects.
Navigating on the Road 10.3 Downloading Satellite Data via QuickGPS Before you start using your device for GPS navigation, open the QuickGPS program first to download ephemeris data (current satellite position and timing information) onto your device. This data is needed to determine the GPS position of your current location. QuickGPS downloads ephemeris data from a web server, instead of from the satellites, using the Internet connection on your device, which can be via Wi-Fi, ActiveSync or GPRS/3G.
Navigating on the Road 197 Download options To configure download times, tap Menu > Options and choose from the available options: • Remind me when data expires. Enables your device to display a reminder message when the validity of the ephemeris data has expired. When you see the reminder message, tap Menu to dismiss the reminder or to set the snooze time so that you will be reminded again. Tap OK to open the QuickGPS program and download the latest data. • Auto download when data expires.
Navigating on the Road
Chapter 11 Experiencing Multimedia 11.1 Taking Photos and Videos 11.2 Viewing Photos and Videos Using Album 11.3 Using Windows Media® Player Mobile 11.4 Using FM Radio 11.5 Using Audio Booster 11.
Experiencing Multimedia 11.1 Taking Photos and Videos Use Camera to take photos and record video clips. You can either use the main (back) camera or second (front) camera to take photos or shoot videos. To open the Camera screen On the Home screen, slide to the Photos and Videos tab and then tap the camera icon ( ). The screen orientation automatically switches to landscape mode when you open Camera. Tip You can also tap Start > Programs > Camera to open the Camera program.
Experiencing Multimedia 201 You can select from the following capture modes: Icon Capture Mode Photo Captures standard still images. Video Captures video clips, with or without accompanying audio. Panorama Captures a sequence of still images continuously in one direction, and allows stitching of all the images to create a panoramic view of a scenery. MMS Video Captures video clips suitable for sending with MMS messages.
Experiencing Multimedia Camera controls The camera comes with an auto-focus function to let you capture sharp and crisp photos and videos of your subjects. Depending on the Shoot Option you have chosen, you will need to either touch or press the ENTER button to activate autofocus. When auto-focus is activated, it is indicated by a flashing white bracket ( ). When focus is set, the bracket changes to a steady green bracket ( ).
Experiencing Multimedia 203 1 Zoom control. Tap Tip to zoom in, or to zoom out. You can also press NAVIGATION up/down (Landscape orientation) or slide your finger clockwise or counterclockwise on the center NAVIGATION CONTROL to zoom in or out. 2 Album. Tap to open Album. See “Viewing Photos and Videos Using Album” for details. 3 Capture mode. Displays the current capture mode. Tap to open an on-screen menu where you can choose the capture mode. 4 Menu. Tap to open the Camera Settings screen.
Experiencing Multimedia 9 Template Selector icon. In Picture Theme mode, tap to toggle among different templates. 10 Progress indicator. In Picture Theme and Panorama modes, this shows the number of consecutive shots. Menu Panel The Menu Panel provides a quick way of adjusting most common camera settings and lets you access more advanced camera settings. On the Camera screen, tap to open the Menu Panel.
Experiencing Multimedia 205 3 Self-timer. Tap to set the self-timer to 2 seconds, 10 seconds, or Off when in the Photo or Contacts Picture mode. When you press the ENTER button to capture a still image, it starts to count down, then captures a still image after the time expires. 4 Advanced. Tap to open the advanced camera settings. See “Advanced Options” for details. 5 Brightness. Tap to open the Brightness bar at the bottom of the screen.
Experiencing Multimedia Zoom In Zoom Out The camera zoom range for a photo or a video clip depends on the capture mode and resolution. Refer to the table for more information. Capture mode Photo Video Resolution Zoom range 3M (2048 x 1536) 1.0x to 2.0x 2M (1600 x 1200) 1.0x to 2.0x 1M (1280 x 960) 1.0x to 2.0x Large (640 x 480) 1.0x to 2.0x Medium (320 x 240) 1.0x to 4.0x CIF (352 x 288) 1x and 1.5x Large (320 x 240) 1x and 1.5x Medium (176 x 144) 1x and 1.
Experiencing Multimedia 207 Capture mode Resolution Panorama MMS Video Contacts Picture Picture Theme Note Zoom range Large (640 x 480) 1x and 2x Medium (320 x 240) 1x, 2x and 4x Medium (176 x 144) 1x and 1.5x Small (128 x 96) 1x and 1.5x Medium (240 x 320) 1.0x to 4.0x Determined by the current template Depends on the size of the selected template For capture size settings and zoom ranges when using the second camera, please refer to the online help.
Experiencing Multimedia Icon Function Back Return to the live Camera screen. Delete Delete the captured image or video. View View the captured image or video in the Album program. Send Send the captured image or video via e-mail or MMS. Assign to Contact After capturing in Contacts Picture mode, tap this icon to assign the photo to a selected contact. Advanced Options The Advanced Options let you adjust options for your selected capture mode and set Camera program preferences.
Experiencing Multimedia 209 • Review Duration. Set a time length for displaying the captured image/video on the Review screen. Select No Limit if you do not want to impose a time limit. Select No Review to immediately return to the live Camera screen after capturing and saving. • Resolution. Select the resolution to use when taking photos or capturing videos. • Quality. Select the JPEG image quality level for all captured still images. Choose from Basic, Normal, Fine, and Super Fine. • Capture Format.
Experiencing Multimedia 1 1 Tap a property to adjust. 2 Tap to reset all properties to their default values. 3 Tap to save the settings. 4 Tap / or press NAVIGATION left/right (Landscape orientation) to increase/decrease the value. 5 Tap to close the submenu without applying and saving the changes. 2 3 4 5 • Effect. Choose a special effect such as Grayscale, Sepia, or Negative, to apply to your photos or video clips. • Metering Mode.
Experiencing Multimedia 211 • Flicker Adjustment. When taking indoor shots, flicker on the camera screen may be caused by inconsistencies between the vertical scan rate of the camera display and the flicker frequency of fluorescent lighting. To reduce flicker, you can change the flicker adjustment setting to Auto or to the proper frequency (50Hz or 60Hz) of the power in the country where your device is being used. • Grid (Photo mode). Choose whether or not to show a grid on the Camera screen.
Experiencing Multimedia 11.2 Viewing Photos and Videos Using Album Use Album to view images and videos in your device. Album offers a host of features that let you rotate images, view your images as a slideshow, use images as contact pictures, and more. Note Album can only display files in the BMP, GIF, PNG, JPG, Animated GIF, 3GP, MP4, and WMV formats. To open Album Do one of the following: • On the Home screen, slide to the Photos and Videos tab and tap Album. • In the Camera program, tap .
Experiencing Multimedia 213 • Tap an image to view it in full screen mode. See “View an image” for details. • Tap a video file (files with the icon) to play back the video file. See “Play back video” in this chapter for details. • Select a still image and then tap Menu > Slideshow to view the images in the album as a slideshow. Animated GIF and video files will not be played back in the slideshow. See “To view still images as a slideshow” in this chapter for details.
Experiencing Multimedia To view the next or previous image When viewing images in Portrait or Landscape mode, go to the next image by swiping your finger across the screen from right to left. Go back to the previous image by swiping your finger from left to right. To zoom in or out of an image While viewing an image, make a full circle motion on the screen with your finger.
Experiencing Multimedia 215 Slide your finger clockwise on an area to zoom in on that area. Slide your finger counterclockwise to zoom out. Tips • When you zoom in on an image, double tap the screen to automatically zoom out and fit the image to the screen. • When you zoom in on an image, tap and hold the screen so you can pan the image. • You can also zoom in and out of the image by sliding your finger around the NAVIGATION CONTROL clockwise/counterclockwise.
Experiencing Multimedia Tap to open the slideshow options where you can set the transition effect to use, time per slide, and orientation of the images. Tap to return to the main Album screen or the Photos and Videos tab. Tap to go back to the previous image. Tip Tap to play or pause the slideshow playback. Tap to go to the next image. If the images are in your favorite album, you can start the slideshow from the Photos and Videos tab on the Home screen.
Experiencing Multimedia 217 Tip If the video is in your favorite album, you can start the video playback from the Photos and Videos tab on the Home screen. On the Photos and Video tab, tap Play. Close Album Close Album by tapping on the main Album screen. When viewing files in full screen mode, tap the screen to show the on-screen menu or playback controls and then tap to go back to the main Album screen. 11.
Experiencing Multimedia To open Windows Media® Player Mobile Tap Start > Programs > Windows Media. About the controls Tap and drag to jump to any part of the video or audio Mute/Unmute Full screen Increase volume Visit WindowsMedia.com Decrease volume Skip to the beginning of Skip to the next file the current file or to the Play/Pause previous file About the screens and menus Windows Media® Player Mobile has three primary screens: • Playback screen.
Experiencing Multimedia 219 • Library screen. The screen that lets you quickly find your audio files, video files, and playlists. It contains categories such as My Music, My Videos, My TV, and My Playlists. At the bottom of each screen, you can open a Menu. The commands on this menu vary, depending on which screen you are viewing. For more information about the commands in these menus, see Help on your device.
Experiencing Multimedia Note On the Device Setup dialog box, make sure that the Sync this device automatically check box is selected. 6. Click Finish. The files will begin synchronizing to your device. The next time you connect your device to your computer while Windows Media® Player is running, synchronization will start automatically. To synchronize content manually to your device 1.
Experiencing Multimedia 221 4. Click Start Sync to start synchronizing the selected files to your device. Notes • Use Windows Media® Player 11 or higher on your computer to synchronize media files to your device. • Audio files copy faster if Windows Media® Player is configured to automatically set the quality level for audio files copied to your device. For more information, see the Windows Media® Player Help.
Experiencing Multimedia Playlists In Windows Media® Player Mobile, you can create a new playlist by saving the current Now Playing playlist and giving it a new name. To save a new playlist 1. If you are not on the Library screen, tap Menu > Library. 2. Tap to select a category (for example, My Music or My Playlists). 3. Select a media file that you want, then tap Menu > Queue Up. This adds the file to the Now Playing list.
Experiencing Multimedia 223 11.4 Using FM Radio FM Radio allows you to listen to FM radio stations on your device. Since FM Radio uses the provided stereo wired headset as an antenna, you must plug in the headset first onto the earphone jack of your device before you open the program. To open FM Radio Tap Start > Programs > FM Radio. The first time this program is used, it will automatically scan for available FM channels in your area, save them as presets, then play the first FM station found.
Experiencing Multimedia This control Does this 1 Turns off FM radio. 2 See “Radio display” for details. 3 Searches the FM band for the next higher FM channel. 4 Increases the radio frequency by 0.1MHz. 5 Turns the sound on or off. 6 Allows you to save up to six favorite FM stations as presets. Tap a button to tune in to a favorite station. 7 Switches between headset and speaker output. 8 Stereo/Mono Allows you to switch between Mono and Stereo modes.
Experiencing Multimedia 225 Radio display 1 Shows the status of FM Radio. 1 2 2 Shows the preset number when you select a preset FM station. 3 Shows the received signal strength. 3 4 Shows the radio frequency. 4 Device controls used in FM Radio Navigation • Press NAVIGATION left/right to search the FM band for the next lower/higher FM channel. When the search reaches the last station, it cycles back to the beginning of the FM band.
Experiencing Multimedia where you want to save the FM station. You can save up to 20 preset radio stations. Radio stations that are saved on Presets 1 to 6 can be accessed on the main FM Radio screen. Tip Tap to remove a favorite FM station from the list. 3. When done, tap OK. To listen to a preset FM station Do one of the following: • On the main FM Radio screen, tap the preset button that shows your favorite station.
Experiencing Multimedia 227 11.5 Using Audio Booster Audio Booster optimizes sound for a better listening experience. It provides preset moods, such as hip hop, jazz, rock, etc., and several enhancement presets that suit different types of music. To access Audio Booster Tap Start > Programs > Audio Booster. 5 1 This control Does this 1 On Select the check box to enable or disable the equalizer. 2 Frequency band Drag the sliders to adjust the frequency.
Experiencing Multimedia 3. Enter a preset name and then tap Done. The preset you created will be added to the list box. To delete a custom equalizer preset 1. Tap the list box then select the Equalizer preset you want to delete. 2. Tap Menu > Delete Preset. Note You can only delete custom equalizer presets. Equalizer presets that are pre-installed cannot be deleted. 11.6 Using MP3 Trimmer Use MP3 Trimmer to trim MP3 files. You can choose to save it as a new file or set it as a ring tone.
Experiencing Multimedia 229 To trim the MP3 file 1. Tap Start > Programs > MP3 Trimmer. 2. Tap Open to find the MP3 file in the device or storage card. 3. On the MP3 Trimmer screen, use the stylus to adjust the Start Point and End Point. After you set the Start Point, the song will play back starting from the start point. After you set the End Point, the song will play back starting from 5 seconds before the end point. 4. Tap Play to play back the trimmed song. 5.
Experiencing Multimedia
Chapter 12 Programs 12.1 Programs on your Device 12.2 Adding and Removing Programs 12.3 Adobe® Reader® LE 12.4 Calendar 12.5 Contacts 12.6 Comm Manager 12.7 JETCET™ PRINT 12.8 Microsoft® Office Mobile 12.9 Notes 12.10 Java 12.11 SIM Manager 12.12 Sprite Backup 12.13 Tasks 12.14 Voice Recorder 12.15 Voice Speed Dial 12.16 WorldCard Mobile 12.
Programs 12.1 Programs on your Device The following are programs you can find on your device or install from the Application disc. Programs in the Start Menu Icon Description Office Mobile Use the complete suite of Microsoft® Office applications for your mobile device. Excel Mobile Create new workbooks or view and edit Excel workbooks. OneNote Mobile Create notes with text, photos, and voice recordings. PowerPoint Mobile View PowerPoint slides and presentations.
Programs 233 Programs screen Icon Description Games Play these pre-installed games: Bubble Breaker, Teeter and Solitaire. ActiveSync Synchronize information between your device and a PC or the Exchange Server. See Chapter 5 and 7 for details. Adobe Reader LE View PDF (Portable Document Format) files on your device. Album View photos and videos that you captured using the device camera. See Chapter 11 for details.
Programs Icon Description Google Maps (Available by Country) View your current location, search for places of interest and addresses, seek directions, and more. See Chapter 10 for details. Internet Sharing Connect your notebook computer to the Internet using your device's data connection. See Chapter 8 for details. Java Download and install Java applications, such as games and tools, on your device. JETCET PRINT Print documents, image files, e-mails, web pages and more from your device.
Programs 235 Icon Description SIM Manager Manage the contacts that are stored on your SIM card. You can also use this program to copy SIM contents to Contacts on your device. Sprite Backup Back up your device’s data and files to a specified folder, a storage card, or a computer. You can install this program from the Application disc. Streaming Media Stream live or on-demand video. See Chapter 8 for details. Tasks Keep track of your tasks.
Programs 12.2 Adding and Removing Programs Additional programs, such as the programs in the Application disc or other programs that you purchase, can be installed and uninstalled on your device. Your device does not allow you to uninstall most of the preinstalled programs. Note Before you purchase additional programs for your device, make sure that they are compatible with your device. To install a program 1.
Programs 237 12.3 Adobe® Reader® LE Adobe® Reader® LE is an application for viewing PDF (Portable Document Format) documents on your device. It supports a subset of the features found in the PC versions of Adobe Reader. To open Adobe Reader LE Tap Start > Programs > Adobe Reader LE. To open a PDF file on your device • Open a PDF file in Adobe Reader LE; or • Open File Explorer, find the PDF file, then tap the file to open it.
Programs To search for text in the document 1. Tap Tools > Find > Text or tap in the toolbar. 2. Type in the text to be searched, then tap Find. The matched text in the document will be highlighted. 3. To view the next occurrence of the text, tap Tools > Find > Next. Tips • Adobe Reader LE displays a bookmark pane for the PDF files that contain bookmarks. Tap the bookmarks to go to a specific section/page within the file.
Programs 239 • If there is a time frame for the appointment, set the start and end dates and times. 4. Specify the type of category for your appointment, so that it can be grouped with other related appointments. Tap Categories, then select a preset category (Business, Holiday, Personal, or Seasonal), or tap New to create your own category. 5. When finished, tap OK to return to the calendar.
Programs View appointments By default, Calendar displays appointments in Agenda view. You can also look at your appointments in Day, Week, Month, and Year views. The highlighted hours here indicate the time of your appointments. The red box and arrows indicate that there are conflicting appointments. Tap to view appointment details. Tap to switch views. Agenda view • To see detailed appointment information in any view, tap the appointment.
Programs 241 Send appointments To send a meeting request Use Calendar to schedule meetings via e-mail with contacts who use Outlook or Outlook Mobile. 1. Open the Calendar screen. 2. Schedule a new appointment, or open an existing one and tap Menu > Edit. 3. Tap Attendees, then tap Add Required Attendee or Add Optional Attendee and add the contacts whom you want to invite. Note You can specify if an attendee is required or optional only if your device is connected to a Microsoft Exchange 2007 server.
Programs 12.5 Contacts Contacts is your address book and information storage for people and businesses you communicate with. You can add the following types of contacts to your device: • Outlook contacts. Contacts that are stored on your device, which can be created on your device or synchronized with your PC or the Exchange Server. • SIM contacts. Contacts that are stored on the SIM card. Only a name and phone number can be stored for each entry. • Windows Live™ contacts.
Programs 243 Add new contacts To add a contact on your device 1. Open the Contacts screen. 2. Tap New, select Outlook Contact, and enter the contact information. 3. In the File as field, choose how you want the contact name to appear in the contact list. 4. To add a photo of the contact, tap Select a picture, and then select the picture file or tap Camera to take a photo of the contact. 5.
Programs Organize and search contacts To group similar contacts For easier management, you can group similar contacts by assigning them to categories. 1. Create a new Outlook contact or edit an existing Outlook contact. 2. Tap Categories. 3. Select a preset category such as Business or Personal, or tap New to create your own category. 4. When finished, tap OK.
Programs 245 Note You can disable the Quick Scroll bar by tapping Menu > Options and selecting the Show alphabetical index check box. This will show the alphabetical index at the top of the Contacts list. • Filter the list by categories. In the contact list, tap Menu > Filter, then tap a category you’ve assigned to a contact. To show all contacts again, select Menu > Filter > All Contacts.
Programs To send contact information as a vCard A vCard (virtual business card) is a standard file format used for exchanging contact information. vCard files can be exported to Outlook on the computer. From your device, you can send a vCard containing contact information as file attachment in an MMS message. 1. On the Contacts screen, select a contact. 2. Tap Menu > Send as vCard. 3. A new MMS message is created with the vCard file attached.
Programs 247 1 2 3 4 5 6 1 Switch Airplane Mode on or off. Turning on Airplane Mode turns off the phone, Wi-Fi and Bluetooth functions. For more information, see "To enable or disable Airplane Mode" in Chapter 2. 2 Switch the phone on or off. Tap Settings > Phone to set the ring tone and other phone settings. See Chapter 13 for details. 3 Switch Bluetooth on or off. Tap Settings > Bluetooth to configure Bluetooth on your device. See Chapter 9 for details. 4 Switch Wi-Fi on or off.
Programs 12.7 JETCET™ PRINT JETCET PRINT lets you print image files or documents from your device straight to a Bluetooth or network printer. You can also print e-mails, e-mail attachments, web pages, appointments, contacts, and tasks. Tip For more information about JETCET PRINT, consult the JETCET PRINT help in your device by tapping Menu > Help > Contents in the JETCET PRINT screen. Open JETCET PRINT Tap Start > Programs > JETCET PRINT. Tap to select an image to print.
Programs 249 1. Tap Start > Programs > JETCET PRINT. 2. If you are not in the Settings tab, tap the settings button ( ), then: • Tap Add Network Printer to set up and connect to a shared network printer. Note The device will wait continuously if you have entered an incorrect IP address while setting up a network printer. • Tap Add Bluetooth Printer to set up and connect to a Bluetooth printer. Note To learn how to set up a printer, refer to the JETCET PRINT help on your device. Print a file 1.
Programs 12.8 Microsoft® Office Mobile Microsoft® Office Mobile consists of the following applications: • Microsoft® Office Excel® Mobile lets you create and edit Excel workbooks and templates on your device. • Microsoft® Office OneNote® Mobile lets you create notes with text, photos, and voice recordings for synchronization later with Microsoft® Office OneNote® 2007 on your computer. • Microsoft® Office PowerPoint® Mobile allows you to view (not create) slide show presentations in *.ppt and *.
Programs 251 Tips • By default, Word Mobile saves documents in .docx format, while Excel Mobile saves workbooks in .xlsx format. If you want to open these types of files on a computer that uses Microsoft Office 2000, Office XP, or Office 2003, you need to download and install the File Format Converter in your computer. You can find this converter at http://www.microsoft.com/downloads/details. aspx?FamilyId=941B3470-3AE9-4AEE-8F43-C6BB74CD1466&displaylang=en.
Programs 3. Tap OK to save. Note To select a drawing (for example, to copy or delete it), tap and hold the drawing briefly. When you lift the stylus, the drawing is selected. To record a voice note You can create a stand-alone recording (voice note) or you can add a recording to a note. 1. Tap Start > Programs > Notes. 2. If you do not see the Recording toolbar, tap Menu > View Recording Toolbar. 3. Do one of the following: • To add a recording to a note, create or open a note.
Programs 253 12.10 Java MIDlets are Java applications such as games and tools that can run on mobile devices, while a MIDlet suite is a collection of one or more MIDlets. The Java program lets you download, install and manage MIDlets or MIDlet suites on your device. Your device supports Java 2 Micro Edition, J2ME. To open the Java program Tap Start > Programs > Java. Install and launch MIDlets/MIDlet suites There are several ways to install a MIDlet/MIDlet suite.
Programs To run a MIDlet/MIDlet suite Do one of the following: • After installation of the MIDlet/MIDlet suite is complete, tap Yes. • On the Java screen, open the folder that contains the MIDlet/MIDlet suite. Select the MIDlet/MIDlet suite, then tap Launch. Manage MIDlets/MIDlet suites You can organize MIDlets/MIDlet suites into folders for easy identification, renaming, updating, and more. If the device memory is full, uninstall some MIDlets/ MIDlet suites to free up memory space.
Programs 255 12.11 SIM Manager SIM Manager allows you to view the contents of your SIM card, transfer contacts from your SIM card to your device or vice versa, and make a call to a SIM contact. To create a contact on your SIM card 1. Tap Start > Programs > SIM Manager. 2. Tap New and enter a contact name and phone number. 3. Tap Save to save the information on your SIM card. Tip To change contact information on your SIM card, tap a SIM contact, edit the information, and then tap Save.
Programs 2. Select the check boxes of the types of phone numbers that you want to be added to the SIM card. 3. Under the Mark column, you can change the indicator that will be appended to the SIM contact names for each phone number type. To do so, select a phone type, tap Edit, enter your desired indicator, then tap Save. 4. After modifying, tap OK. 5. Tap Menu > Contacts to SIM. 6. Select the check boxes of the contact’s phone numbers that you want to copy to your SIM card, then tap Save.
Programs 257 12.12 Sprite Backup Use Sprite Backup to back up data, which includes settings, files, contacts, and all other information, to the device memory, storage card or a computer. Note If you are sending your device for repair or performing a hard reset, data from your device will be lost. It is recommended that you use Sprite Backup to back up your files including settings, contacts and other information to your computer or a storage card. To install Sprite Backup 1.
Programs Use the check boxes to select or exclude items for backup. Main screen Backup Data Selection screen Notes It is recommended that you do not back up the File System of your device as this may cause restoration problems. To not back up the File System, expand the System Data folder by tapping “+” on its left side and then clearing the File System checkbox.
Programs 259 To restore data 1. On the Sprite Backup main screen, tap Restore. Sprite Backup then searches for all available backup files from the device memory and storage card and then displays them on the Open File screen. Tip To search for backup files created on your computer, connect your device to your computer and run Sprite Backup PC Manager on your computer. In Sprite Backup’s Open File screen on your device, set Location to PC. 2. Select the backup file you want to restore and then tap Next.
Programs 12.13 Tasks Use Tasks to keep track of things you need to do. A task can occur once or repeatedly (recurring). Your tasks are displayed in a task list. Overdue tasks are displayed in red. A reminder will be displayed when you have new tasks to be completed. To create a task 1. Tap Start > Programs > Tasks. 2. Tap Menu > New Task, enter a subject for the task, and fill in information such as start and due dates, priority, and so on. 3.
Programs 261 To send task information as a vCalendar After selecting the task to send in the Task screen, tap Menu > Send as vCalendar to send a vCalendar containing task details as a file attachment in an MMS message. For more information, see “MMS” in Chapter 6. 12.14 Voice Recorder Voice Recorder lets you record your voice and quickly send it as an MMS or e-mail attachment, beam it via Bluetooth, or set the recorded voice as your ring tone.
Programs Tip If you need to adjust the sound volume, touch any of the status icons on the title bar and then touch the Volume icon ( ) to open the System Volume screen where you can adjust the volume. To send a voice recording through MMS Select a voice recording, then tap Menu > Send via MMS. A new MMS message is then created with the voice recording automatically inserted as an audio clip. See “MMS” in Chapter 6 to learn how to compose and send MMS messages.
Programs 263 12.15 Voice Speed Dial You can record voice tags so that you can dial a phone number or launch programs simply by speaking a word. To create a voice tag for a phone number 1. On the TouchFLO 3D Home screen, slide to the People tab and then touch All People to open the Contacts screen. Tip You can also touch Start > Contacts to open the Contacts screen. 2. Do one of the following: • Scroll to the desired contact, then touch Menu > Add Voice Tag.
Programs Select the desired phone number. Touch the Record icon to start recording. To create a voice tag for a program Touch Start > Settings > Personal tab > Voice Speed Dial > Application tab. The Application tab displays a list of all installed programs on your device. The procedure for creating a voice tag for a program is the same as the procedure for creating a voice tag for a phone number. To make a call or launch programs using a voice tag 1. Touch Start > Programs > Voice Speed Dial. 2.
Programs 265 To view and test the voice tags you have created 1. Touch Start > Settings > Personal tab > Voice Speed Dial. 2. The Voice Tag tab displays a list that contains all the voice tags you have created. Select an item in the list, then do one of the following. • Touch the Record button ( • Touch the Play button ( • Touch the Delete button ( ) to rebuild the voice tag. ) to play the voice tag. ) to delete the voice tag. 12.
Programs Capture and export business card information Capture a business card and export the card information as a new contact in your Contacts list. To capture a business card and export its information to Contacts 1. Tap on the WorldCard Mobile screen. 2. Press ENTER to take a photo of the business card. Refer to Chapter 11 for details on how to use the camera.
Programs 267 5. Tap Export, then go to your Contacts list to view the exported contact. For more information about using WorldCard Mobile, see Help on your device. 12.17 ZIP The ZIP program increases the storage capacity of your device by allowing you to compress files in the conventional ZIP format. It also allows you to extract files from a zip file. To start ZIP on your device Tap Start > Programs > ZIP. Each time you start ZIP, it searches for files that have the .
Programs 2. From the zip file, select files by doing one of the following: • Touch a file to select it. • To select several files, touch Menu > Action and make sure Multi-Select Mode is selected. Select files by touching each file. (Touch a selected file to deselect it). • To select all files, touch Menu > Action > Select All. 3. Touch Menu > Action > Extract. 4. Choose a folder where the files will be extracted to, then touch Extract. 5. Touch Menu > File > Close Archive to close the zip file.
Chapter 13 Managing Your Device 13.1 Copying and Managing Files 13.2 Settings on your Device 13.3 Changing Basic Settings 13.4 Using Connection Setup 13.5 Using Task Manager 13.6 Connecting to an External Display 13.7 Protecting Your Device 13.8 Managing Memory 13.9 Resetting Your Device 13.10 Windows Update 13.
Managing Your Device 13.1 Copying and Managing Files You can copy files between your device and computer, or copy files to a storage card installed on your device. You can also efficiently manage your files and folders using File Explorer. To copy files using Windows Mobile Device Center or ActiveSync 1. Connect your device to the computer. 2. Click File Management > Browse the contents of your device in Windows Mobile Device Center on your computer, or click Explore in ActiveSync on your computer.
Managing Your Device 271 the desired operation on the shortcut menu. To copy or delete multiple files, tap and drag over the desired files to select, tap and hold the selection, then choose the desired operation on the shortcut menu. To copy files to a storage card 1. Make sure that the storage card is properly installed on your device. 2. Tap Start > Programs > File Explorer and navigate to the appropriate folder. 3. Tap and hold the file you want to copy, then tap Copy. 4.
Managing Your Device Icon Description Lock Set a password for your device. Menus Set which programs will appear in the Start menu. Owner Information Enter your personal information on your device. Phone Customize phone settings such as ring tone, set a PIN number for your SIM card, and more. Sounds & Notifications Enable sounds for events, notifications, and more, and set the type of notification for different events.
Managing Your Device 273 Icon Description Clock & Alarms Set the device clock to the date and time of your locale or to a visiting time zone when you’re traveling. Alarms can also be set at specified days and times of a week. Customer Feedback Set your device to automatically send information about how you use Windows Mobile. By default, this option is disabled. Device Information See information about the firmware version, hardware, identity, and the duration of calls made on your device.
Managing Your Device Icon Description Power Check the remaining battery power. You can also set the brightness of the backlight and timeout for turning off the display (switching device to Sleep mode) to conserve battery power. Regional Settings Set the regional configuration to use, including the format for displaying numbers, currency, date, and time on your device. Remove Programs Remove programs that you installed on your device.
Managing Your Device 275 Connections tab Icon Description Advanced Network Turn on/off HSPA, set the line type to use when making circuit switch data (CSD) connection, set the GPRS authentication method, and set the SMS service preference. HSPA is a digital data service that provides high-speed downstream data rates.
Managing Your Device Icon Description Wi-Fi Scan for available wireless networks. Wireless LAN See information about the active wireless network, and customize Wi-Fi settings. 13.3 Changing Basic Settings Date and time To set the date and time 1. On the Home screen Home tab, tap the time display and then tap the Time tab. Tip Tap the More tab and select the Display the clock on the title bar in all programs option to show the clock on all screens. 2.
Managing Your Device 277 Regional settings The style in which numbers, currency, dates, and times are displayed is specified in regional settings. 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. On the System tab, tap Regional Settings > Region tab and then select your region from the list. Note This does not change the language of your device’s operating system. The region you select determines which options will be available on the other tabs. 3.
Managing Your Device 2. On the System tab, tap Screen > Text Size tab. 3. Move the slider to increase or decrease the text size. Device name The device name is used to identify your device in the following situations: • Synchronizing with a computer • Connecting to a network • Restoring information from a backup Note If you synchronize multiple devices with the same computer, each device must have a unique name. To change the device name 1.
Managing Your Device 279 Tips • You can use *.wav, *.mid, *.mp3, *.wma, or other types of sound files that you downloaded from the Internet or copied from your computer as ring tones. To quickly set the music file as a ring tone, tap and hold the music file and then select Set As Ringtone. For a complete list of supported audio file formats for ring tones, see "Specifications" in the Appendix.
Managing Your Device 3. On the Notifications tab, in Event, tap an event name and choose how you want to be notified by selecting the appropriate check boxes. You can choose from several options, such as a special sound, a message, a flashing light, or vibrate. Tip Turning off sounds and flashing light notifications helps conserve battery power.
Managing Your Device 281 To automatically configure the device’s data connections The first time you power on your device, or when you insert a new SIM card and then power on your device, Connection Setup will display a notification message to inform you that it will automatically configure your device’s connection settings. 1. Tap Yes on the notification message. Note If your SIM card supports multiple network operator profiles, the next message that appears will display network profile choices.
Managing Your Device 13.5 Using Task Manager Task Manager lets you view and stop running programs, configure the and enable the Quick Menu on the Home screen. button, To open Task Manager • Tap the Quick Menu button on the top right corner of the Home screen to open the Quick Menu, then tap . • On the Home screen, slide to the Settings tab and then tap All Settings. On the System tab, tap Task Manager. To switch back to a running program • Tap the program name in the Quick Menu.
Managing Your Device 283 To close running programs from the Task Manager 1. On the Task Manager screen, tap the Running tab. 2. Do one of the following: • Select the check box of the programs that you want to close, then tap Stop Selected. • Tap Stop All to close all programs in the list. • Tap Menu > Stop All but Selected to close all programs except those which check boxes are selected. Tip You can also close running programs from the Quick Menu on the Home screen.
Managing Your Device 13.6 Connecting to an External Display The TV Out function outputs the device’s screen contents and audio to an external display with an RCA cable socket such as a television. Notes • You need an HTC TV Out cable to be able to connect your device to an external display. The HTC TV Out cable is sold separately. • When you plug in the HTC TV Out cable to your device, you will not be able to play music files from the TouchFLO 3D Music tab.
Managing Your Device 285 5. Tap the type of media you want to output. 6. Turn on the external display and then switch it to the input signal that you connected the HTC TV Out cable to (for example, Video 1). 13.7 Protecting Your Device Protect your SIM card with a PIN You can protect your SIM card from unauthorized use by assigning a PIN (personal identification number). The default SIM card PIN is provided by your wireless service provider. To enable the SIM card PIN 1.
Managing Your Device Tip If your device is configured to connect to a network, use an alphanumeric password for increased security. 5. Enter the password in both the Password and Confirm boxes. 6. Tap OK. The next time the device is turned on, you will be prompted to enter your password. Notes • To ensure that you can always make emergency calls, do not begin your password with the digits of your local emergency number.
Managing Your Device 287 13.8 Managing Memory To see how much memory is available for use 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. On the System tab, tap Memory > Main tab. The amount of memory allocated to data storage versus program storage is displayed, as well as the amount of memory in use versus the available memory. To see the available space of the storage card 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2.
Managing Your Device 13.9 Resetting Your Device Soft reset Occasionally, you may need to reset your device. A soft (or normal) reset of your device clears all active program memory and shuts down all active programs. This can be useful when your device is running slower than normal, or a program is not performing properly. A soft reset is also necessary after the installation of some programs. If a soft reset is performed when programs are running, unsaved work will be lost. To perform a soft reset 1.
Managing Your Device 289 Important If Encrypt files when placed on a storage card is enabled, backup all files from the storage card before using Clear Storage, hard reset, or updating the ROM system software. Otherwise you will no longer be able to access the encrypted files on the storage card. Use ActiveSync or Windows Mobile Device Center to transfer files between your storage card and computer. After the procedure, copy your files back to the storage card. To perform a hard reset 1.
Managing Your Device 13.10 Windows Update You can update Windows Mobile® on your device with the latest updates, security patches or fixes, if these are available. To set up Windows Update The first time you run Windows Update, you need to set up how you want Windows Update to check for patches on the Microsoft web site. 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. On the System tab, tap Windows Update. 3. On the Update Setup screen, tap Next. 4.
Managing Your Device 291 • Tap Connections to change how the device connects to the Internet when checking for updates. • Tap Change Schedule to change how Windows Update checks for Windows Mobile® updates. 13.11 Battery Saving Tips How long your battery power lasts depends on the battery type and how you use your device. Try the following to help conserve battery life: • When the device is not in use, press POWER to switch off the display.
Managing Your Device • Turn Bluetooth off when you are not using it. Make your device visible to other devices only when you are trying to establish a Bluetooth partnership. For more information about Bluetooth, see Chapter 9. • Lower the volume. • Close battery-intensive programs, such as the Camera, when you are done using them. Make sure the programs are ended and are not continuously running in the background. Refer to “Using Task Manager” in this chapter for information on closing programs.
Appendix A.1 Specifications A.
Appendix A.1 Specifications System Information Processor Qualcomm® MSM7201A™ 528 MHz Memory • ROM : 512 MB • RAM : 288 MB DDR Note: Figures are the total ROM and RAM memory available for use and storage. Since the memory is shared by the operating system, applications, and data, the actual available memory is less than what is specified. Operating System Windows Mobile® 6.
Appendix 295 Physical Dimensions 102 mm (L) X 51 mm (W) X 18.05 mm (T) Weight 165 g (with battery) Display LCD Type 2.8-inch TFT-LCD flat touch-sensitive screen Resolution 480 x 640 VGA resolution Camera Module Type Main camera: 3.
Appendix Audio Microphone/ Speaker Built-in Ring tone • Supports MP3, AAC, AAC+, WMA, WAV, AMR-NB formats • 40 polyphonic and standard MIDI format 0 and 1 (SMF) / SP MIDI Supported Playback Formats • Windows Media® Player: MP3, MPEG-4, AAC, AAC+, eAAC+, WMA, WAV, AMR, AMR‑NB, AMR-WB, AWB, SP-MIDI • TouchFLO™ 3D: AMR-NB/WB, MP3, MPEG-4, WMA, AAC, AAC+, eAAC+ Controls Device Control • • • • • • • • Hardware Keyboard 5-row QWERTY keyboard TouchFLO™ 3D Touch-sensitive navigation control with ENTER
Appendix 297 A.2 Regulatory Notices Regulatory Agency Identifications For regulatory identification purposes, your product is assigned a model number of RAPH100. To ensure continued reliable and safe operation of your device, use only the accessories listed below with your RAPH100. The Battery Pack has been assigned a model number of DIAM171. Note This product is intended for use with a certified Class 2 Limited Power Source, rated 5 Volts DC, maximum 1 Amp power supply unit.
Appendix • EN 301 489-24 Electromagnetic compatibility and Radio spectrum Matters (ERM); Electromagnetic Compatibility (EMC) standard for radio equipment and services; Part 24: Specific conditions for IMT-2000 CDMA direct spread (UTRA) for mobile and portable (UE) radio and ancillary equipment. • ETSI EN 301 511 Global system for mobile communications (GSM); Harmonized EN for mobile stations in the GSM 900 and GSM 1800 bands, covering essential requirements of article 3.
Appendix 299 • EN 50360 / 50361 Product standard to demonstrate the compliance of mobile phones with the basic restrictions related to human exposure to electromagnetic fields (300 MHz ~ 3 GHz). • EN 50392 Generic standard to demonstrate the compliance of low power electronic and electrical apparatus with the basic restrictions related to human exposure to electromagnetic fields (10 MHz - 300 GHz) - General public.
Appendix Safety Precautions for RF Exposure Use only original manufacturer-approved accessories, or accessories that do not contain any metal. Use of non-original manufacturer-approved accessories may violate your local RF exposure guidelines and should be avoided. Exposure to Radio Frequency (RF) Signals Your device contains a radio transmitter and receiver. The radiated output power is far below the international radio frequency exposure limits.
Appendix 301 causing loss of performance and SAR levels exceeding the recommended limits as well as result in non-compliance with local regulatory requirements in your country. To assure optimal phone performance and ensure human exposure to RF energy is within the guidelines set forth in the relevant standards; always use your device only in its normal-use position. Do not touch or hold the antenna area unnecessarily when placing or receiving a phone call.
Appendix Hearing Aids Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider, or call the customer service line to discuss alternatives. Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.
Appendix 303 The WEEE logo (shown at the left) on the product or on its box indicates that this product must not be disposed of or dumped with your other household waste. You are liable to dispose of all your electronic or electrical waste equipment by relocating over to the specified collection point for recycling of such hazardous waste. Isolated collection and proper recovery of your electronic and electrical waste equipment at the time of disposal will allow us to help conserving natural resources.
Appendix
Index Symbols 3G 154 A A2DP 184 ActiveSync - about 233 - set up 108 - synchronize with computer 109 - synchronize with Exchange Server 138 Add and remove programs 236 Adobe Reader LE 233, 237 Airplane Mode 59, 247 Alarm 279 Album - about 212, 233 - close Album 217 - play back video 216 - select a photo or video to view 212 - view an image 213 Attachment - add to e-mail 131 - download 133 - set IMAP4 to automatically receive attachments 135 - set Outlook to automatically receive attachme
Index - turn on and off 247 - visible 182 Bluetooth Explorer 233 C Calculator 233 Calendar - about 232 - create appointment 238 - send appointment 241 - view appointment 240 Call History 58 Calling - from Contacts 53 - from Home screen 54 - from Phone screen 53 Camera - about 200, 233 - Advanced Options 208 - capture modes 200 - controls 202 - file formats 201 - icons 202 - Menu Panel 204 - specifications 295 - zooming 205 Car kit phones 66 Clear Storage 289 Clock & Alarms 27
Index 307 E E-mail - Internet e-mail account (POP3/ IMAP4) 126 - mail server settings 127 - Mail tab (Home screen) 75 - send 131 - settings (POP3/IMAP4) 128 - setup wizard 126 - synchronize 104, 134, 138 - types of e-mail accounts 124 EDGE 154 Emergency call 54 Emoticon - MMS 122 - Windows Live Messenger 171 Entering Information 90 - On-screen 90 - QWERTY keyboard 90 Equalizer 227 Excel Mobile 232, 250 Exchange Server 138 F Favorite contacts 72 File Explorer 233, 270 Find contact - C
Index J Java - about 234 - create folders 254 - install MIDlets/MIDlet suites from device 253 - install MIDlets/MIDlet suites from Internet 253 - manage MIDlets/MIDlet suites 254 - uninstall MIDlets 254 - update a MIDlet/MIDlet suite 254 JETCET PRINT 234 L Letter Recognizer 100 Library - Music tab (Home screen) 80 - Windows Media Player Mobile 218 Live Messenger 169 M Mail tab (Home screen) 75 Meeting request 144, 241 Memory 46, 287, 294 Messages tab (Home screen) 74 Messaging - a
Index 309 P Panorama capture mode 201 Password 285 People tab (Home screen) 72 Phone 52, 232 Phone Keypad 95 Phone services 280 Photo capture mode 201 Photos and Videos tab (Home screen) 77 Pictures & Videos 234 Picture Theme capture mode 201 PIN 52, 285 Playlists - Music tab (Home screen) 81 - Windows Media Player Mobile 222 Play media 221 Play music - Music tab (Home screen) 79 - Windows Media Player Mobile 221 Podcasts 179 POP3 126 PowerPoint Mobile 232, 250 Programs 232 Programs ta
Index - Advanced Network 275 - Beam 275 - Bluetooth 275 - Connections 154, 155, 275 - Connection Setup 275, 280 - Domain Enroll 275 - USB to PC 111, 275 - Wi-Fi 153, 276 - Wireless LAN 152, 276 Settings (Personal tab) - Buttons 271 - Input 271 - Keyboard Sliding Sound 271 - Lock 272, 285 - Menus 272 - Owner Information 272 - Phone 272, 278, 280 - Sounds & Notifications 272, 279 - Today 272 - Voice Speed Dial 265, 272 Settings (System tab) - About 272, 278 - Certificates 272 - Clear
Index 311 - install 31 Streaming Media 165, 235 Swap/switch calls 56 Synchronize - ActiveSync 109 - change information types 110 - music and videos 112 - via Bluetooth 111 - Windows Media Player 219 - Windows Mobile Device Center 105 - with computer 84, 109 - with Exchange Server 84, 138 T T9 96 Task Manager 274, 282 Tasks 235, 260 Text messages - copy from SIM card 118 - copy to SIM card 117 - create new message 115 - Messages tab (Home screen) 74 - send 116 Text size (screen) 277 Tou
Index W Weather tab (Home screen) 82 Wi-Fi 150, 247 Windows Live 167, 235 Windows Live Messenger 169, 234 Windows Media Player Mobile - about 235 - file formats 217 - menus 218 - playlists 222 - troubleshoot 222 Windows Mobile Device Center 105 Windows Update 274, 290 Word Mobile 232, 250 WorldCard Mobile 235, 265 Y YouTube 159, 235 Z ZIP - about 235, 267 - create archive 268 - open zip file and extract files 267 Zooming - Camera 205 - finger gestures 87
