Chapter 7 Exchanging Messages 7.1 Messaging 7.2 Text Messages 7.3 MMS 7.4 Types of E-mail Accounts 7.5 E-mail Setup Wizard 7.
112 Exchanging Messages 7.1 Messaging Messaging is where your text messages (SMS), multimedia messages (MMS), and e-mails are located. When you receive new messages, you can open them from the Today screen by tapping the type of message that you want to open. New e-mail messages New SMS and MMS messages To select a messaging account Do one of the following: • Tap Start > Messaging. The Account Picker screen then appears where you can select an account.
Exchanging Messages 113 To automatically add a signature in outgoing messages You can automatically add your name and other information as your signature in outgoing SMS, MMS and e-mail messages by following these steps: Tip You need to specify your signature for each type of messaging account. 1. Tap Start > Messaging, then tap Menu > Options. 2. Tap Signatures. 3. Select a type of messaging account in which to add a signature. 4. Select the Use signature with this account check box. 5.
114 Exchanging Messages 5. A new text message is then created. To add more recipients, enter their mobile phone numbers in the To field, separating them with a semicolon. You can also tap To if you want to add mobile phone numbers from Contacts. 6. Enter your message. • To quickly add common messages, tap Menu > My Text and tap a desired message. • To check the spelling, tap Menu > Spell Check. 7. Tap Send. Tips • To enter symbols, tap 123 on the on-screen keyboard and then tap a symbol.
Exchanging Messages 115 7.3 MMS Sending multimedia messages (MMS) to your friends and family is fun and easy. You can include pictures, videos, and audio clips in a multimedia message. Notes • Multimedia messaging is a charged service and has to be provisioned on your mobile account. Please contact your wireless service provider to have MMS provisioned as part of your calling plan. • Make sure the size of MMS messages that you send is within the limits allowed by your wireless service provider.
116 Exchanging Messages • Server address. URL address of the server where MMS messages are stored. • Connect via. Select the connection that your device uses for MMS messages. • Send limit. Select the maximum MMS message size allowed by your wireless service provider. • WAP version. Select either WAP 1.2 or WAP 2.0, depending on which one is being used by your wireless service provider. 5. Tap Done.
Exchanging Messages 117 5. Tap the Insert icon ( )to select and insert a photo or video clip. When selecting a photo or video clip, you can: • Tap Select to insert the selected photo or video clip into the MMS message you are composing. • Tap to take a photo and insert it into the MMS message. • Tap to record MMS video and insert it into the MMS message. • Tap Exit ( ) to quit selection and return to the MMS message. 6. Enter text and insert audio clips by tapping the respective areas.
118 Exchanging Messages To add an audio clip to an MMS message You can add one audio clip per slide in your MMS message. 1. Tap Insert audio on your MMS message. By default, My Documents will be shown. Tap My Music or another folder that contains audio files. When navigating folders, tap the Down arrow ( ) to return to the upper folder. 2. Select an audio file. When selected, you can: • Tap • Tap Select to insert it into your MMS message.
Exchanging Messages 119 To block a phone number from sending you MMS messages If you do not want to receive MMS messages from a particular sender, you can add the sender’s phone number to the MMS Blacklist. 1. When you receive a new MMS message, open and view the message. 2. To avoid receiving MMS messages from this sender next time, tap Menu > Show > Message Detail. 3. On the MMS Detail screen, tap Menu > Show Contact Details. 4. Tap Menu > Save to Blacklist. 5. Tap Done.
120 Exchanging Messages 7.5 E-mail Setup Wizard Windows Mobile’s E-mail Setup Wizard lets you easily set up your personal and work e-mail accounts. You can add an e-mail account from an Internet Service Provider (ISP) or other e-mail provider as well as web-based accounts such as Gmail®, Yahoo!® Mail Plus, AOL®, etc. Note For more information about setting up your company Outlook e-mail account, see Chapter 8.
Exchanging Messages 121 Note If Auto Setup is unsuccessful, select Internet e-mail from the Your e-mail provider list on the next screen. You will also be asked to enter e-mail server settings during the setup process. See “To specify e-mail server settings” for details. 4. Enter your name. You can also edit the Account display name field to specify the name of your ISP or e-mail provider. Tap Next. 5. Enter your login name if it does not show automatically in the User name field.
2 Exchanging Messages To customize download and format settings Before you tap Finish when setting up your POP3 or IMAP4 e-mail account, you can tap Review all download settings to choose download options, message format, and other settings.
Exchanging Messages 123 7.6 Using E-mail After setting up e-mail accounts on your device, you can start sending and receiving e-mail messages. Create and send messages To compose and send a message 1. Tap Start > Contacts. 2. Slide your finger upward on the touch screen to scroll down the contact list. See “Finger scrolling and finger panning” in Chapter 1 for more details on finger scrolling. 3. Touch the contact’s name to open his or her contact card. 4.
124 Exchanging Messages Filter the Inbox message list When the Inbox on your device is full of messages, it may be difficult to browse and locate a desired message. You can filter your Inbox to display only the messages that contain a particular sender or subject you are searching for. To filter your Inbox • Enter the sender name or e-mail subject you want to look for using the on-screen keyboard. As you tap keys, the message list narrows down to the conditions you have set.
Exchanging Messages 125 To download an attachment An attachment appears below the subject of the message. Tapping the attachment opens the attachment if it has been fully downloaded or marks it for download the next time you send and receive e-mail. Notes • If there are multiple attachments in the message, all attachments are downloaded. • For information about setting your device to automatically download file attachments, see "Customize e-mail settings".
126 Exchanging Messages 5. If the e-mail does not download immediately, tap Menu > Send/ Receive. 6. If images do not immediately appear on the message, tap Internet pictures blocked then tap Download Internet pictures. 7. Tap Menu and choose whether to reply or forward the message. 8. Enter your response then tap Send. Tip E-mail can contain hyperlinks to web pages. Download messages The manner in which you download messages depends on the type of e-mail account you have.
Exchanging Messages 127 Customize e-mail settings To change the download size and format for Outlook e-mail 1. Disconnect your device from the computer. 2. Tap Start > Programs > ActiveSync. 3. Tap Menu > Options, select E-mail, then tap Settings. 4. On the E-mail Sync Options screen: • Under Message format, select HTML or Plain text. • Under Download size limit, select the desired e-mail size. 5. Close ActiveSync and reconnect your device to the computer.
128 Exchanging Messages 5. Select a download size from the Download attachments smaller than list box. 6. Tap Finish. To store attachments on a storage card 1. Tap Start > Messaging. 2. Tap Menu > Options > Storage tab. 3. Select the When available, use this storage card to store attachments checkbox.
Chapter 8 Working With Company E-mails and Meeting Appointments 8.1 Synchronizing with the Exchange Server 8.2 Working With Company E-mails 8.3 Managing Meeting Requests 8.
130 Working With Company E-mails and Meeting Appointments 8.1 Synchronizing with the Exchange Server To keep up-to-date with your company e-mails and meeting schedules while you’re out of the office, you can connect your device to the Internet wirelessly and synchronize with your company’s Exchange Server. Set up an Exchange Server connection Before you can synchronize or access information on the Exchange Server, you need to set up an Exchange Server connection on your device.
Working With Company E-mails and Meeting Appointments 131 Tip To change Exchange Server settings, open ActiveSync then tap Menu > Configure Server. Start synchronization Before you start synchronizing with the Exchange Server, make sure your device has been set up with a data connection to the Internet so that you can synchronize wirelessly. For more information about connections, see Chapter 10. After you finish setting up an Exchange Server connection, your device automatically starts synchronization.
132 Working With Company E-mails and Meeting Appointments You need to perform a full synchronization between your device and the Exchange Server first before Direct Push can be enabled. Requirement The Direct Push feature works for your device only if your company is using Microsoft Exchange Server 2003 Service Pack 2 (SP2) with Exchange ActiveSync or higher version. To enable Direct Push via Comm Manager 1. Tap Start > Programs > Comm Manager. 2.
Working With Company E-mails and Meeting Appointments 133 Instant download through Fetch Mail The Fetch Mail feature downloads an entire e-mail immediately without the need for you to perform a full Send/Receive action. This limits the download to just the e-mail message that you want and helps save data cost. Requirement Fetch Mail works for your device only if your company is using Microsoft Exchange Server 2007 or higher. 1. Tap Start > Messaging > Outlook E-mail. 2. Tap an e-mail message to open it.
134 Working With Company E-mails and Meeting Appointments 5. From the Look in list, choose whether to search from your inbox or outbox only or to search all folders. 6. Tap Search. Flag your messages Flags serve as a reminder for you to follow-up on important issues or requests contained in e-mail messages. Flagging messages, which has been a useful feature on desktop Outlook E-mail, can also be done in Outlook Mobile on your device. You can flag received e-mail messages on your device.
Working With Company E-mails and Meeting Appointments 135 Out-of-office auto-reply Outlook Mobile allows you to retrieve and change your out-of-office status. Just like desktop Outlook E-mail, Outlook Mobile automatically sends an auto-reply message when you’re not available. To send out-of-office auto-reply messages 1. Tap Start > Messaging > Outlook E-mail. 2. Tap Menu > Tools > Out of Office. 3. From the I am currently list, select Out of the Office. 4. Enter your auto-reply message then tap Done. 8.
136 Working With Company E-mails and Meeting Appointments 3. Choose whether or not to edit your response e-mail before sending then tap OK: 4. If you accepted the meeting request, it will automatically be added as an appointment in Calendar on your device. To view the list of meeting participants 1. Tap Start > Calendar. 2. Tap a meeting request that you previously sent, then tap Attendees. The list of required and optional attendees will be listed.
Working With Company E-mails and Meeting Appointments 137 8.4 Finding Contacts in the Company Directory In addition to having contacts on your device, you can access contact information from your organization’s Company Directory. By having over-the-air access to the Company Directory, you can easily send e-mail messages and meeting requests to anyone in your company.
138 Working With Company E-mails and Meeting Appointments 3. Enter a partial or full contact name and tap Search. In the search results list, tap a contact to select it. Notes • You can save a contact from the Company Directory to your device by selecting the contact then tapping Menu > Save to Contacts. • You can search on the following information as long as that information is included in the Company Directory: First name, Last name, E-mail name, Display name, E-mail address, or Office location.
Chapter 9 Working With Documents and Files 9.1 Microsoft® Office Mobile 9.2 Adobe® Reader® LE 9.3 Copying and Managing Files 9.4 ZIP 9.
140 Working With Documents and Files 9.1 Microsoft® Office Mobile Microsoft® Office Mobile consists of the following applications: • Microsoft® Office Word Mobile lets you create and edit documents and templates in Word Mobile and save them as *.doc, *.rtf, *.txt, and *.dot files. • Microsoft® Office Excel® Mobile lets you create and edit Excel workbooks and templates on your device. • Microsoft® Office PowerPoint® Mobile allows you to view (not create) slide show presentations in *.ppt and *.
Working With Documents and Files 141 9.2 Adobe® Reader® LE Adobe® Reader® LE is an application for viewing PDF (Portable Document Format) documents on your device. It supports a subset of the features found in the PC versions of Adobe Reader. To open Adobe Reader LE • Tap Start > Programs > Adobe Reader LE. To open a PDF file on your device Do one of the following: • • Open a PDF file in Adobe Reader LE. Open File Explorer and find the desired PDF file, then tap the file to open it.
142 Working With Documents and Files 9.3 Copying and Managing Files You can copy files between your device and PC, or copy files to a storage card that is inserted on your device. You can also efficiently manage your files and folders using File Explorer. To copy files using Windows Mobile Device Center or ActiveSync 1. Connect your device to the PC. 2. Click File Management > Browse the contents of your device in Windows Mobile Device Center or click Explore in ActiveSync on your PC.
Working With Documents and Files 143 To copy files to a storage card 1. Make sure the storage card is properly inserted into your device. 2. Tap Start > Programs > File Explorer and navigate to the appropriate folder. 3. Tap and hold the file you want to copy, and tap Copy. 4. Tap the Down arrow ( ) then tap Storage Card from the list. 5. Tap Menu > Edit > Paste. Tip You can configure programs such as Word Mobile and Excel Mobile to directly save edited files on your storage card.
144 Working With Documents and Files 3. Tap Menu > Action > Extract. 4. Choose a folder in which files will be extracted to, then tap Extract. To create a zip archive 1. Tap File > New Archive. 2. On the Save As screen, enter a zip file name and choose a folder in which to save the zip file. You can also choose whether the zip file will be saved on the device’s main memory or storage card. 3. Tap Save. 4. Tap Menu > Action > Add. 5. Double-tap the folder that contains the files you want to archive. 6.
Working With Documents and Files 145 To open Sprite Backup • On your device, tap Start > Programs > Sprite Backup. Sprite Backup operates in two different modes: Basic mode and Advanced mode. Basic mode Advanced mode To back up data in Basic mode Basic mode is the default mode, and allows you to easily back up your entire device with the tap of a button. Note To change backup options or location, you will need to do it in Advanced mode. 1. On the Basic mode screen, tap Backup Now. 2.
146 Working With Documents and Files To back up data in Advanced mode Advanced mode is designed for users with more advanced backup requirements. 1. Tap Options > Switch to Advanced Mode. 2. In the Backup tab, you will see a tree view of the data and files on your device. Tap the ‘+’ symbol at the left of an item to view its subitems. Use the check boxes to select or exclude items for backup. 3. Tap the Backup button and follow the on-screen instructions to complete the backup.
Chapter 10 Getting Connected 10.1 Comm Manager 10.2 Connection Setup 10.3 Ways of Connecting to the Internet 10.4 Wi-Fi 10.5 GPRS/3G 10.6 Dial-up 10.7 Starting a Data Connection 10.8 Internet Explorer® Mobile 10.9 Windows Live™ 10.10 Using Your Device as a Modem (Internet Sharing) 10.
148 Getting Connected 10.1 Comm Manager Comm Manager acts like a central switch that lets you enable or disable phone features as well as manage your data connections easily. To open Comm Manager • Tap Start > Settings > Connections tab > Comm Manager. • Tap Start > Programs > Comm Manager. 1 2 Off/disabled On/enabled 3 4 5 Unavailable 6 1 Tap to switch Airplane mode on or off. Turning on Airplane mode turns off the phone, Bluetooth and Wi-Fi functions.
Getting Connected 149 10.2 Connection Setup Connection Setup configures your device’s data connections, such as GPRS, WAP, and MMS, for you so that you do not need to enter the settings manually onto your device. All you need to do is to select your network operator, then Connection Setup does all the configuration for you.
150 Getting Connected 4. Tap Yes. Connection Setup configures the data connection settings. 5. After the Connection Setup completes the configuration, tap Restart. 10.3 Ways of Connecting to the Internet Your device’s networking capabilities allow you to access the Internet or your corporate network at work through wireless and conventional connections.
Getting Connected 151 Connect to wireless networks After Wi-Fi is turned on in Comm Manager, your device scans for available wireless networks in your area. To connect to a wireless network 1. The network names of the detected wireless networks are displayed on a pop-up message window. Tap the desired wireless network, then tap OK. 2. On the next pop-up message window, do one of the following: • Tap The Internet if the wireless network connects your device to the Internet.
152 Getting Connected • Title bar. When you enable Wi-Fi on your device, the Wi-Fi ON icon appears on the title bar. After Wi-Fi is turned on, your device scans for available wireless networks and the wireless signal icon appears on the title bar. The arrows in this icon move back and forth while your device is scanning for a wireless network signal. Once your device successfully connects to a wireless network, the arrows stop moving. • Wi-Fi Status screen.
Getting Connected 153 To save battery power while connected to a wireless network Using Wi-Fi quickly consumes battery power. Turn off Wi-Fi when not in use. You can also enable power saving settings. 1. Tap Start > Settings > Connections tab > Wireless LAN. 2. On the Power Mode tab, move the Power Save Mode slider to a position that optimizes performance with the least power consumption.
154 Getting Connected 4. In the Select a modem list, select Cellular Line (GPRS, 3G), then tap Next. 5. Enter the Access point name, then tap Next. 6. Enter the user name and password, only if required. 7. Tap Finish. Notes • To view help information for any screen, tap the help icon ( ). • To modify your connection settings, tap Manage existing connections on the Connections screen, and complete the connection wizard. 10.
Getting Connected 155 6. Enter your user name, password, and any other information required by your ISP. 7. Tap Finish. 10.7 Starting a Data Connection After setting up a data connection such as GPRS or ISP dial-up on your device, you can now connect your device to the Internet. The connection is started automatically when you begin using a program that accesses the Internet such as Internet Explorer® Mobile.
156 Getting Connected To view a Web page using finger scrolling and panning • Slide your finger upward to scroll down the Web page, or slide your finger downward to scroll up the Web page. • To pan downward, touch and hold on the touch screen then drag your finger upward. To pan upward, touch and hold on the touch screen then drag your finger downward. • To pan towards the right, touch and hold on the touch screen then drag your finger to the left.
Getting Connected 157 Tap Menu > Tools and choose to send the current Web page link, view the page’s properties, or set preferences. Note: To save an image from a Web page to your device, tap and hold the image then tap Save Image. For more information about using Internet Explorer® Mobile, please go to: http://www.microsoft.com/windowsmobile/help/pocketpc/browseinternet.mspx 10.9 Windows Live™ Windows Live™ gives you a full Internet experience on your device.
158 Getting Connected Set up Windows Live™ The first time you use Windows Live™, sign in by using your Windows Live ID, which is your Windows Live Mail or Hotmail address, and password. To set up Windows Live for the first time 1. Tap Start > Programs > Windows Live. 2. Tap Sign in to Windows Live. 3. On the next screen, tap the links to read the Windows Live™ Term of Use and the Microsoft Privacy Statement. After reviewing them, tap Accept. 4.
Getting Connected 159 The Windows Live™ interface On the main interface of Windows Live™, you will see a search bar, navigation bar, and an area where you can customize to show your picture. 1 1 Live Search Bar 2 Tap the Left or Right arrow to switch between Windows Live Messenger, Live Mail, and Sync status. 3 Tap to change the display name, picture, or personal message. 4 Tap Menu to access and change settings.
160 Getting Connected Windows Live Messenger With this mobile version of Windows Live Messenger, you enjoy many of the same cool features that you get from the desktop version, which include the following: • • • • • • • • Note Instant messaging via text and voice Multiple conversations Add emoticons Contact list with presence Send and receive files including photos Change status/display name View contacts by online status, groups, and more Send messages even when a contact is offline Before you can use W
Getting Connected 161 To start and end conversations 1. In the contact list, select a contact then tap Send IM to open a message screen. 2. Enter your text message in the text entry area of the message screen. 3. To add an emoticon, tap Menu > Add emoticon then tap an icon from the list of emoticons. 4. Tap Send. 5. To end a conversation with the current contact, tap Menu > End conversation. Tips • To send a file, tap Menu > Send. You can choose to send a picture, voice clip or any file.
162 Getting Connected 10.10 Using Your Device as a Modem (Internet Sharing) Internet Sharing connects your PC or notebook computer to the Internet by using your device’s data connection (GPRS or EDGE, for instance). You can choose to connect via USB or Bluetooth. Notes • Make sure your device has a SIM card installed, and your device has a GPRS or phone dial-up modem connection. If your device has not been set up with a data connection yet, tap Menu > Connection Settings on the Internet Sharing screen.
Getting Connected 163 To use your device as a Bluetooth modem For the computer to use the Internet connection of your device, activate Internet Sharing on your device, then set up a Bluetooth Personal Area Network (PAN) between the computer and your device. 1. On your device, turn on Bluetooth and set it to visible mode by following the steps in “To turn Bluetooth on and make your device visible”. 2.
164 Getting Connected Note If the Bluetooth adapter or dongle on your computer was installed using a third-party provided driver, open the Bluetooth software that came with the Bluetooth adapter/dongle to connect your computer and device via Bluetooth. Refer to the Bluetooth adapter/dongle documentation for more information. 8.
Getting Connected 165 To turn Bluetooth on and make your device visible 1. On your device, tap Start > Settings > Connections tab > Bluetooth > Mode tab. 2. Select the Turn on Bluetooth and Make this device visible to other devices check boxes. 3. Tap OK. Bluetooth partnerships A Bluetooth partnership is a relationship that you create between your device and another Bluetooth-enabled device in order to exchange information in a secure manner. To create a Bluetooth partnership 1.
166 Getting Connected To accept a Bluetooth partnership 1. Ensure that Bluetooth is turned on and in visible mode. 2. Tap Yes when prompted to establish a partnership with the other device. 3. Enter a passcode (the same passcode that is entered on the device requesting the partnership) to establish a secure connection. The passcode must be between 1 and 16 characters. 4. Tap Next. 5. Tap Finish. You can now exchange information with the paired device.
Getting Connected 167 4. Tap the name of the Bluetooth headset, then tap Next. 5. Enter the passcode of the Bluetooth headset, then tap Next. 6. Make sure the Hands Free check box is selected. If you have a Bluetooth stereo headset, also make sure Wireless Stereo is selected. 7. Tap Finish. While the Bluetooth stereo headset is connected, the Headset icon ( ) will appear on the title bar. Note If the Bluetooth stereo headset becomes disconnected, turn the headset on and repeat steps 1 to 3 above.
168 Getting Connected If your computer has Windows Vista® or Windows XP SP2 and your computer’s Bluetooth adapter is supported by your Windows version, do the following steps: a. On your computer, open Bluetooth Devices from the Control Panel then click the Options tab on the Bluetooth Devices window. b. For Windows Vista, select Allow Bluetooth devices to find this computer. For Windows XP, select Turn discovery on and Allow Bluetooth devices to connect to this computer. c.
Getting Connected 169 • For your device to receive Bluetooth beams, tap Start > Settings > Connections tab > Beam and make sure the Receive all incoming beams check box is selected. Bluetooth Explorer and Bluetooth file sharing Bluetooth Explorer searches for other Bluetooth devices that have file sharing enabled and lets you access their Bluetooth shared folder. You can copy files from and to their shared folder, and create subfolders in it.
170 Getting Connected 3. Select one or more files, then tap Menu > Edit and choose to cut or copy the files. 4. Tap Up twice. 5. Navigate to the folder where you want to paste the files on your device, then tap Menu > Edit > Paste. Print files via Bluetooth Connect your device to a Bluetooth printer to print contact information, appointment details, messages, and other file types. Note You can print files in the .txt, .jpg, .xhtml, .vcf, .vcs file formats.
Getting Connected 171 To print a JPEG file 1. Do one of the following: • In Pictures & Videos, select the JPEG file and then tap Menu > Print via Bluetooth. • In File Explorer, tap and hold the JPEG file and then on the menu, tap Print via Bluetooth. 2.
172 Getting Connected
Chapter 11 Using GPS 11.1 Guidelines and Preparation for Using GPS 11.2 Downloading Satellite Data via QuickGPS 11.
174 Using GPS 11.1 Guidelines and Preparation for Using GPS • Do not operate the GPS system while driving. The plotted GPS route is only for driving reference. It should not interfere with actual driving behavior. • Please use the GPS system cautiously. Users shall be liable for any damages resulting from negligent operation of the system. • The GPS signal cannot pass through solid non-transparent objects.
Using GPS 175 • When using the device inside a vehicle, use the car holder to mount the device securely in place. Avoid placing the device in the areas shown in the following diagram: 1 Do not place where it will block the driver’s vision. 2 Do not place where air bags could deploy. 3 Do not place anywhere in the vehicle without securing the device in the holder.
176 Using GPS 11.2 Downloading Satellite Data via QuickGPS Before you start to use your device for GPS navigation, open the QuickGPS program first to download ephemeris data (current satellite position and timing information) onto your device. This data is needed to determine the GPS position of your current location. QuickGPS downloads ephemeris data from a Web server, instead of from the satellites, using the Internet connection on your device, which can be via ActiveSync or 3G/GPRS.
Using GPS 177 Download options To configure download times, tap Menu > Options and choose from the available options: • Remind me when data expires. Enables your device to display a reminder message when the validity of the ephemeris data has expired. When you see the reminder message, tap Menu to dismiss the reminder or to set the snooze time so that you will be reminded again. Tap OK to open the QuickGPS program and download the latest data. • • Autodownload when data expires.
178 Using GPS 11.3 GPS Controls When a map or menu is shown on the GPS software, use the following controls on your device to navigate: • On the Map Browser screen, press NAVIGATION up to zoom in, press NAVIGATION down to zoom out on a map. • Use the NAVIGATION CONTROL to scroll through items in a menu. Press the ENTER button to select a menu item and open the corresponding screen. Tip You can also rotate the NAVIGATION WHEEL to select items in a menu and to zoom in and out on the Map Browser screen.
Chapter 12 Experiencing Multimedia 12.1 Camera 12.2 Camera Album 12.3 Pictures & Videos 12.4 Windows Media® Player Mobile 12.5 Streaming Media 12.6 Audio Manager 12.7 Using Audio Booster 12.
180 Experiencing Multimedia 12.1 Camera Taking photos and recording video clips along with audio are easy with your device’s two built-in cameras: Main camera: Rear 3 megapixel CMOS camera for capturing high resolution pictures and video clips with audio 2nd camera: Front camera for video calls and taking self-portrait shots To open the Camera screen • Press the CAMERA button on your device. • Tap Start > Programs > Camera.
Experiencing Multimedia 181 You can select from the following capture modes: Icon Capture Mode Photo: Captures standard still images. Video: Captures video clips, with or without accompanying audio. MMS Video: Captures video clips suitable for sending with MMS messages. Contacts Picture: Captures a still image and gives you the option to immediately assign it as a Photo ID for a contact. Picture Theme: Captures still images and places them within frames.
182 Experiencing Multimedia Camera controls • Press CAMERA or ENTER to take a photo or contacts picture. • Press CAMERA or ENTER to start recording video; press it again to stop recording. • Press CAMERA or ENTER each time when taking photos for a picture theme or panorama. • To take consecutive shots in Sports mode, press CAMERA or ENTER, then move your device to follow the movement of your subject.
Experiencing Multimedia 183 In Video and MMS Video modes, this shows the remaining duration that can be recorded. While recording video, this shows the recorded duration. 3 Zoom control. Tapping zoom out. / on the screen allows you to zoom in or Note This control only appears when zooming is supported by the Resolution you have selected. Tip You can also press Navigation up/down or rotate the NAVIGATION WHEEL to zoom in an out. 4 Album. Tap to open Camera Album. See “Camera Album” for details.
184 Experiencing Multimedia Quick Settings Panel The Quick Settings Panel provides a quick way of adjusting the most common camera settings. Tap the screen to open the Quick Settings Panel. Keep tapping a button on the panel, for instance, Resolution, to cycle through the available settings. Note The available settings on the menu depend on the Capture mode selected. 6 1 5 2 4 3 1 Resolution. Tap to change the resolution. See the table in the previous page for the detailed capture sizes. 2 Storage.
Experiencing Multimedia 185 4 Self-timer. Tap to set the self-timer to 2 seconds, 10 seconds, or Off when in the Photo or Contacts Picture mode. When you press the CAMERA or ENTER button to capture a still image, it starts to count down, and then captures a still image after the assigned time. 5 Brightness. Tapping the minus/plus icon ( / ) decreases or increases the brightness level. 6 White Balance. White balance enables the camera to capture colors more accurately in different lighting conditions.
186 Experiencing Multimedia Capture mode Photo Video MMS Video Contacts Picture Picture Theme Panorama Sports Burst Capture size setting Zoom range 3M (2048 x 1536) No zooming available 2M (1600 x 1200) No zooming available 1M (1280 x 960) 1.0x to 2.0x Large (640 x 480) 1.0x to 2.0x Medium (320 x 240) 1.0x to 4.0x Small (160 x 120) 1.0x to 8.
Experiencing Multimedia 187 The Review screen After taking a still image or recording a video clip, you can view, send, or delete the image or video clip on the Review screen. You can also tap the following icons at the bottom of the Review screen: Icon Function Back Return to the live Camera screen. Delete Remove the captured image or video. Send Send via e-mail or MMS. View View the image in the Camera Album program, or play the captured video in Windows Media® Player.
188 Experiencing Multimedia Camera settings Tap the Menu icon ( ) to open the Camera Settings screen. The Camera Settings screen allows you to configure capture and camera settings. The Camera settings consist of two tabs: Capture Settings and Advanced. Use the Capture Settings tab to adjust options for your selected capture mode; Use the Advanced tab to set the Camera program preferences. You can either tap on-screen or press the Navigation Control buttons to navigate the Camera Settings screen.
Experiencing Multimedia 189 • Quality. Select the JPEG image quality level for all captured still images. Choose from Basic, Normal, Fine, and Super Fine. • Metering Mode. Select a metering mode to allow the camera to measure the amount of light and calculate the best-fit exposure value before capturing. Choose either Center Area to measure light using the center area of the image or Average to measure light using the area all around the image. • Storage. Select where you want to save your files.
190 Experiencing Multimedia • Keep Backlight. Turn the backlight on or off. This overrides your device backlight settings while you are using the camera. • Review Duration. Set a time length for displaying the captured image/video on the Review screen. Select No Limit if you do not want to impose a time limit. Select No Review to immediately return to the live Camera screen after capturing and saving. • Flicker Adjustment.
Experiencing Multimedia 191 • Image Properties. This option lets you adjust the camera display properties, such as Contrast, Saturation, Hue, and Sharpness. 2 1 Tap a property to adjust. 2 Tap the left/right arrow icon or press NAVIGATION left/right (in landscape orientation) to increase/decrease the value. 3 Tap to close the submenu without applying and saving the changes. 4 Tap to reset all properties to their default values. 5 Tap to save the settings.
192 Experiencing Multimedia 12.2 Camera Album Use the Camera Album to view images and videos that you captured using the Camera program. Camera Album offers a host of features that let you rotate images, view your images as a slide show, use images as contact pictures, and more. Note Only files supported by the Camera program are displayed in Camera Album. To know which file formats are supported, see “File formats supported" in the Camera section.
Experiencing Multimedia 193 To view an image On the main Camera Album screen, touch the thumbnail of the image you want to view. While viewing the image, you can zoom in or rotate the image. To learn how to zoom and rotate the image, see the succeeding procedures. While viewing an image, touch the screen or press ENTER to open the onscreen menu. Icon Function Icon Function Touch to send the image via one of your Messaging accounts. Touch to start the slide show.
194 Experiencing Multimedia To rotate the image 1. View the image you want to rotate. 2. With your finger, make a semicircle motion on the screen. Slide your finger clockwise to rotate the image 90 degrees clockwise. Slide your finger counter-clockwise to rotate the image 90 degrees counterclockwise. To zoom in or out of an image While viewing an image, make a full circle motion on the screen with your finger. Slide your finger clockwise on an area to zoom in on that area.
Experiencing Multimedia 195 To view the images as a slide show On the Camera Album screen, touch Slide Show. While viewing the slide show, touch the screen to show playback controls. Touch to open the slide show options where you can set the transition effect to use, time per slide, and orientation of the images. Touch to go back to the previous image. Touch to return to the main Camera Album screen. Touch to play or pause slideshow playback. Touch to go to the next image.
196 Experiencing Multimedia 12.3 Pictures & Videos Pictures & Videos allows you to manage the following types of media files on your device: File Type File Extensions Image *.bmp, *.jpg, *.gif, *.png GIF animation *.gif Video *.avi, *.wmv, *.mp4, *.3gp, *.3g2 Audio *.wma To open Pictures & Videos • Tap Start > Programs > Pictures & Videos. To copy media files to your device • Copy pictures and GIF animation files from your PC or a storage card to the My Pictures folder on your device.
Experiencing Multimedia 197 To play GIF animation files 1. Select a GIF animation file (marked with a icon) and tap View. 2. The GIF Animation program then opens and plays the animation. To play videos 1. By default, the contents of the My Pictures folder will be shown. 2. To find the video clips that you captured, tap the down arrow ( ) next to the My Pictures folder and tap My Documents > My Videos. Video clips are displayed as thumbnails by default, which appear with a media icon ( ). 3.
198 Experiencing Multimedia • • To crop a picture, tap Menu > Crop. Next, tap and drag to select the area to crop. Tap inside the box to crop, or tap outside the box to cancel cropping. To adjust the brightness and contrast levels of a picture, tap Menu > Auto Correct. Note To undo an edit, tap Menu > Undo. To cancel all unsaved edits you made to the picture, tap Revert to Saved. 12.
Experiencing Multimedia 199 About the controls The following are available controls on the Windows Media® Player Mobile. Tap and drag to jump to any part of the video or audio Mute/Unmute Full screen Increase Volume Visit WindowsMedia.com Decrease Volume Skip to the beginning of Skip to the next file the current file or to the Play/Pause previous file About the screens and menus Windows Media® Player Mobile has three primary screens: • Playback screen.
200 Experiencing Multimedia Synchronize video and audio files Use the latest version of Windows Media® Player on your PC to synchronize digital media files from your PC to your device. This ensures that protected files and album art (for skins) are copied to your device correctly. To synchronize content to your device automatically 1. On your PC, start Windows Media® Player and then connect your device to your PC. 2. In the Device Setup Wizard, select Yes, search my computer now.
Experiencing Multimedia 201 Playlists and Library List Content List Sync List 4. Click Start Sync to start synchronizing the selected files to your device. Notes • Use Windows Media® Player 11 or higher on your PC to synchronize media files to your device. • Audio files copy faster if Windows Media® Player is configured to automatically set the quality level for audio files copied to your device. For more information, see the Windows Media® Player Help.
202 Experiencing Multimedia To play video and audio files on your device 1. Select a category (for example, My Music or My Playlists). 2. Tap and hold the item that you want to play (such as a song, album, or artist name), then tap Play. Tips • To play a media file that is stored on your device but is not in a library, on the Library screen, tap Menu > Open File. Tap and hold the item that you want to play (such as a file or a folder), then tap Play.
Experiencing Multimedia 203 12.5 Streaming Media Streaming Media lets you stream live broadcasts or on-demand media content from the Web. The media is sent in a continuous stream to your device and is played as it arrives, along with the audio. The Streaming Media program allows you to play 3GP and MPEG-4 files. It also supports playback of SDP (Session Description Protocol) files.
204 Experiencing Multimedia To stream media files directly on the Streaming Media Player Streaming Media only supports RTSP links when you stream *.3gp and *.mp4 files directly on the program. Note Before you launch the Streaming Media program, make sure that you are connected to the Internet. 1. Tap Start > Programs > Streaming Media. 2. From the program, tap Connect. 3. Enter the URL for the Web site (rtsp://) and the file name. 4. Tap Connect. 5. Streaming Media then starts playing the file.
Experiencing Multimedia 205 12.6 Audio Manager Audio Manager is a music browser and player in one. It gives you access to all the music files on your device, and allows you to easily browse for the music that you want to play by organizing music into categories such as title, artist, album, etc. You can also create playlists of your favorite songs and use the integrated Music Player to play them back. To launch Audio Manager • Tap Start > Programs > Audio Manager.
206 Experiencing Multimedia When you tap a category on the Library’s Main screen, you will see more submenus which may have deeper levels of menus. For example, when you tap Artists, another level of submenus will be listed showing artist names. When you tap an artist name, more submenus showing album names will be displayed. Keep opening the submenus until you reach the level where song titles can be selected for playback.
Experiencing Multimedia 207 Playlists The Playlists screen shows the current playlists that are found on the device memory and memory card. There are two types of playlists that will be shown on the Playlist screen: • Windows Media® Player playlists. These are playlists that are in Windows Media® Player Mobile’s Library (which is synchronized with Windows Media® Player on your computer), and they are indicated by the Windows Media® Player icon ( ).
208 Experiencing Multimedia To play back a playlist 1. On the Playlists screen, tap to select a playlist. 2. Tap the first song in the selected playlist. Music Player automatically opens and starts playing the first song. After each song, the next one in the playlist will be played. Note The content of playlists is not automatically updated when music files have been deleted from the device memory or memory card.
Experiencing Multimedia 209 12.7 Using Audio Booster Audio Booster enhances your music experience by providing you with controls for adjusting sound settings while you are listening to music. It adds 3D sound, treble and bass effects, and provides controls for adjusting them. It even has an equalizer with presets as well as a control panel for fine tuning sound. To access Audio Booster • Tap Start > Programs > Audio Booster.
210 Experiencing Multimedia This control Does this 6 • Tap Menu > Cancel to exit Audio Booster without applying Menu the modified settings: • Tap Menu > Reset to change back to the default settings. Equalizer The Equalizer optimizes sound for a better listening experience. It provides preset moods, such as hip hop, jazz, rock, etc., and several enhancement presets that suit different types of music. It also has a 10-band graphic equalizer that lets you adjust the loudness of sound by frequency.
Experiencing Multimedia 211 To apply a preset 1. Select the Equalizer check box to enable the equalizer. 2. Tap the list box then select a desired preset. 12.8 Using FM Radio FM Radio allows you to listen to FM radio stations on your device. Since FM Radio uses the provided stereo wired headset as an antenna, you must plug in the headset first onto the earphone jack of your device before you open the program. You can switch between the wired headset and speaker when listening to FM.
212 Experiencing Multimedia FM Radio controls 1 2 7 8 3 4 5 9 10 11 6 Tip Tap Menu to choose more options for FM Radio, such as Scan & Save to perform a rescan of the FM band for available FM stations and save them as presets, and more. This control Does this 1 Turns off the FM radio. 2 See “Radio Display” for details. 3 Decreases the radio frequency by 0.1MHz. 4 Stereo/Mono Allows you to switch between Mono and Stereo modes.
Experiencing Multimedia 213 This control Does this 10 Turns the sound on or off. 11 Adjusts the volume. Tap to increase the volume. Tap to decrease the volume. The volume level is displayed below the icon. Radio Display 1 Shows the station name when the RDS (Radio Data System) or RDBS (Radio Data Broadcast System) signal is available. 2 Shows the preset number when you select a preset FM station. 3 Shows the received signal strength. 4 Shows the radio frequency.
214 Experiencing Multimedia Saving presets Presets are favorite FM stations that you can save for easy access. You can save up to six FM stations to the preset buttons on the main FM Radio screen, or save up to 20 presets on the Presets screen. To save FM stations to the preset buttons 1. Tune to the desired FM frequency. Tap here 2. Tap the number on a preset button. The frequency number of your favorite FM station will be displayed on the preset button.
Experiencing Multimedia 215 FM Radio Main Menu Tap Menu on the FM Radio screen to access options for the FM Radio program. Scan & Save Automatically scan radio stations that can be picked up by the device and save them as presets. Existing presets will be cleared and replaced with the newly scanned radio stations. You can have a maximum of 20 preset radio stations. Stereo Toggles between using Stereo or Mono mode when listening to an FM radio station. Mute Toggles between muting and restoring the volume.
216 Experiencing Multimedia
Chapter 13 Managing Your Device 13.1 Adding and Removing Programs 13.2 Using Task Manager 13.3 Resetting Your Device 13.4 Managing Memory 13.5 Windows Update 13.
218 Managing Your Device 13.1 Adding and Removing Programs Before you purchase additional programs for your device, make sure that they are compatible with your device. To add programs 1. Download the program to your PC (or insert the CD or disk that contains the program into your PC). You may see a single *.exe file, a *.zip file, a Setup.exe file, or several versions of files for different device types and processors. Be sure to only select programs designed for your device and processor type. 2.
Managing Your Device 219 To configure the Exit ( ) button You can configure the Exit button to shut down running programs when the button is tapped, or to just temporarily close the program screen but keep the program running. 1. On the Task Manager screen, tap the Button tab. 2. Select the Enable the “X” button to end running programs check box. Note When the Enable the “X” button to end running programs check box is not selected, tapping the Exit button will only close a program screen.
220 Managing Your Device To set the sorting preference for running programs in the Quick Menu 1. On the Task Manager screen, tap the Advanced tab. 2. Choose whether to sort according to Program name or Memory usage. The list will be sorted in ascending order. 13.3 Resetting Your Device Soft reset Occasionally, you may need to reset your device. A soft (or normal) reset of your device clears all active program memory and shuts down all active programs.
Managing Your Device 221 Important If Encrypt files placed on storage cards is or was enabled before, then backup all files from the storage card before using Clear Storage, performing a hard reset, or updating the ROM system software. Otherwise you will no longer be able to access the encrypted files on the storage card. Use ActiveSync or Windows Mobile Device Center to transfer files between your storage card and computer. After the procedure, copy your files back to the storage card.
222 Managing Your Device 13.4 Managing Memory To see how much memory is available for use, tap Start > Settings > System tab > Memory. On the Main tab, the amount of memory allocated to data storage versus program storage is displayed, as well as the amount of memory in use versus the available memory. To see available storage card memory, tap Start > Settings > System tab > Memory > Storage Card tab.
Managing Your Device 223 13.5 Windows Update You can update Windows Mobile® on your device with the latest updates, security patches or fixes, if they are available. To set up Windows Update The first time you run Windows Update, you need to set up how you want Windows Update to check for patches on the Microsoft Web site. 1. Tap Start > Settings > Systems tab > Windows Update. 2. On the Update Setup screen, tap Next. 3. Select how you want to check for updates, Manual or Automatic, then tap Next.
224 Managing Your Device 13.6 Battery Saving Tips How long your battery power lasts depends on battery type and how you use your device. Try the following to help preserve battery life: • When the device is not in use, press POWER to switch off the display. • Tap Start > Settings > System tab > Power to open the Power settings screen. On the Advanced tab of the Power settings screen, you can specify when your device automatically turns off the display to conserve battery power.
Chapter 14 Using Other Applications 14.1 Voice Speed Dial 14.2 Java 14.
226 Using Other Applications 14.1 Voice Speed Dial You can record voice tags so that you can dial a phone number or launch programs simply by speaking a word. Create a voice tag for a phone number 1. Tap Start > Contacts to open the Contacts list. 2. Do one of the following: • Tap and hold the desired contact, then tap Add Voice Tag. • Select the desired contact, then tap Menu > Add Voice Tag. • Tap the desired contact to open the contact’s detailed screen, then tap Menu > Add Voice Tag. 3.
Using Other Applications 227 5. When you create a voice tag for the item, you can do one of the following: • • • Tap the Record button to rebuild the voice tag. Tap the Play button to play the voice tag. Tap the Delete button to delete the voice tag. Create a voice tag for a program 1. Tap Start > Settings > Personal tab > Voice Speed Dial > Application tab. 2. The Application tab displays a list of all installed programs on your device.
228 Using Other Applications 14.2 Java MIDlets are Java applications such as games and tools that can run on mobile devices, while a MIDlet suite is a collection of one or more MIDlets. The Java program lets you download, install and manage MIDlets or MIDlet suites on your device. Your device supports Java 2 Micro Edition, J2ME. To open the Java program • Tap Start > Programs > Java. Install and launch MIDlets/MIDlet suites There are several ways to install a MIDlet/MIDlet suite.
Using Other Applications 229 To run a MIDlet/MIDlet suite Do one of the following: • After installation of the MIDlet/MIDlet suite is complete, tap Yes. • On the Java screen, open the folder that contains the MIDlet/MIDlet suite. Select the MIDlet/MIDlet suite then tap Launch. To stop running a MIDlet/MIDlet suite • Tap Exit or Quit if presented on the MIDlet/MIDlet suite’s screen or menu.
230 Using Other Applications 14.3 Spb GPRS Monitor Using Spb GPRS Monitor, you can monitor how much data you have sent and received on your device, and check the network usage costs by taking into account your service plan details. You can also view connection cost and traffic charts, generate reports of network connection usage, and export reports to CSV files for use with Microsoft® Office Excel® and Access. Install GPRS Monitor The GPRS Monitor program is included on the Application CD.
Using Other Applications 231 The GPRS Monitor icon and pop-up window Another way of displaying status information visually is by enabling the GPRS Monitor icon to be shown on the title bar. This icon shows the GPRS/ dial-up connection speed, data traffic, and battery status. To show the GPRS Monitor icon on the title bar 1. Tap Start > Programs > Spb GPRS Monitor. 2. Tap Tools > Options > Icon tab. 3. Select the Show taskbar icon check box.
232 Using Other Applications To enter your service plan details Service plan details, or tariffs, determine the price that you pay for your data transfers. The tariff may either be flat rate or time-based, depending on whether you’re using GPRS or a phone dial-up connection for data transfers. Contact your service provider to find out about your tariff, and enter the information in the Tariff tab or the Tariff Details tab on the Options screen.
Appendix A.1 Regulatory Notices A.
234 Appendix A.1 Regulatory Notices Regulatory Agency Identifications For regulatory identification purposes, your product is assigned a model number of POLA100. To ensure continued reliable and safe operation of your device, use only the accessories listed below with your POLA100. The Battery Pack has been assigned a model number of POLA160. Note This product is intended for use with a certified Class 2 or Class 3 Limited Power Source, rated 5 Volts DC, maximum 1 Amp power supply unit.
Appendix 235 Modifications The FCC requires the user to be notified that any changes or modifications made to the device that are not expressly approved by High Tech Computer Corporation may void the user’s authority to operate the equipment. Safety precautions for RF exposure • • Use only original manufacturer-approved accessories, or accessories that do not contain any metal. Use of non-original manufacturer-approved accessories may violate your local RF exposure guidelines and should be avoided.
236 Appendix damage the phone, causing loss of performance and SAR levels exceeding the recommended limits as well as result in non-compliance with local regulatory requirements in your country. To assure optimal phone performance and ensure human exposure to RF energy is within the guidelines set forth in the relevant standards; always use your device only in its normal-use position. Do not touch or hold the antenna area unnecessarily when placing or receiving a phone call.
Appendix 237 Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Turn the phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
238 Appendix A.2 Specifications System Information Processor Qualcomm® MSM7200TM 400MHz Memory – ROM : 256 MB – RAM : 128 MB DDR SDRAM Note: Figures are the total ROM and RAM memory available for use and storage. Since the memory is shared by the Operating System, applications, and data, the actual available memory is less than what is written. Operating System Windows Mobile® 6 Professional Power Battery Rechargeable Lithium-ion battery, 1350 mAh Charging Time 2.
Appendix 239 Internal Antenna Yes Physical Dimensions 110 mm (L) x 58 mm (W) x 15.5 mm (T) Weight 130 g (with battery) Camera Module Type Main camera: 3.
240 Appendix RDS/RBDS • Radio Data Service (RDS)/Radio Broadcast Data Service (RBDS) decoder • Integrated RDS/RBDS demodulator in accordance with EN50067 Controls and Lights Device Control • HTC TouchFLO™ • 4-way NAVIGATION WHEEL with ENTER button • Two phone functions : TALK and END • Two program buttons : Voice Command and Camera • POWER button • RESET button LEDs The right bi-color LED shows green and amber lights for HSDPA/UMTS/EDGE/GSM/GPRS standby, message, and network status as well as for notif
Index Symbols 3D sound 209 3G 153 A A2DP 166 ActiveSync - set up 91 - synchronize 92, 131 Add and remove programs 218 Adobe Reader LE 47, 141 Alarm 82 Answer/end a call 69 Appointment search 62 Attachment - add to e-mail 123 - download 125 Audio Booster 47, 209 Audio Manager 47, 205 B Backlight 80, 81 Back up data 144 Basic settings 80 Bass effects 209 Battery - battery information 22 - charge battery 27 - save battery power 153, 224 Beam - via Bluetooth 167 Block Recognizer 60 Bluetooth - Bluetooth E
242 Index Car kit phones 77 Clear Storage 221 Clock & Alarms 50, 80 Comm Manager 47, 52, 148 Company Directory 137 Conference call 70 Configure data connection settings 26 Connection Setup 149 Connect device to Internet - Dial-up 154 - GPRS/3G 153 - start a connection 155 - ways of connecting 150 Contacts 46, 96 Contacts Picture capture mode 181 Contacts search 62 Copy - contacts to SIM card 100 - copy and manage files 142 - media files from PC to device 200 - SIM contacts to device 100 Customize - Start m
Index 243 I IMAP4 120 Input methods - Block Recognizer 60 - Keyboard 55 - Letter Recognizer 60 - Symbol Pad 59 - Transcriber 61 Input Panel 54 International call 77 Internet 150 Internet Explorer Mobile 46, 155 Internet Sharing 47, 162 J Java - create folders 229 - install MIDlets/MIDlet suites from device 228 - install MIDlets/MIDlet suites from Internet 228 - manage MIDlets/MIDlet suites 229 - overview 47 - rename MIDlet or folder 229 - uninstall MIDlets 229 - update a MIDlet/MIDlet suite 229 K Key
244 Index N Network Wizard 26, 44 Notes 47, 107 Notes search 62 Now Playing screen (Windows Media Player Mobile) 199 O Office Mobile 46, 140 Open PDF file 141 Owner information 84 P Panning - finger panning 41 Panorama capture mode 181 Password 85 Phone 46, 64, 66 Phone services 83 Photo capture mode 181 Pictures & Videos - edit picture 197 - file formats 196 - overview 48 - play GIF animation 197 - play videos 197 - view pictures 196 Picture Theme capture mode 181 PIN 64, 85 Playback screen (Windows
Index 245 Scrolling - finger scrolling 41 Search 48, 62 Send - e-mail 123 - MMS message 116 - text message (SMS) 113 Settings 80 - camera 184 Settings (Connections tab) - Beam 52 - Bluetooth 52, 164 - Comm Manager 148 - Connections 52, 153, 154 - CSD Line Type 52 - GPRS Setting 52 - HSDPA 52 - Network Wizard 52, 149 - SMS Service 52 - USB to PC 52, 93 - Wi-Fi 52 - Wireless LAN 52 Settings (Personal tab) - Buttons 49 - Input 49 - Large Start Menu 49 - Lock 49, 85 - Menus 49, 85 - Owner Information 49, 84 - P
246 Index - copy files 143 - encrypt 86 Streaming Media 48, 203 Swap/switch calls 70 Synchronize - ActiveSync 92 - change information types 92 - via Bluetooth 93 - Windows Media Player 94, 200 - with computer 92 - with Exchange Server 130 System information 239 T Tasks 48, 105 Tasks search 62 Task Manager 218 Text messages - copy from and to SIM card 114 - send 113 Text size (screen) 81 Today screen 29, 83 TouchFLO 37, 51, 67 Touch Cube (TouchFLO) 37 Touch Keyboard 55 Touch Keypad 58 Transcriber 61 Trebl
Index 247 Z ZIP - create archive 144 - open zip file and extract files 143 - overview 49, 143 Zoom (Camera) 185
248 Index
