User's Manual

Table Of Contents
Checking the wireless network status
1. Slide the Notifications panel open, and then tap .
2. Tap Wi-Fi, and then tap the wireless network that HTC Phone is connected to.
A message box is then displayed showing the Wi-Fi status, speed, signal strength, and
more.
If you want to remove the settings for this network, tap Forget.
Connecting to a different Wi-Fi network
1. Slide the Notifications panel open, and then tap .
2. Tap Wi-Fi. Detected Wi-Fi networks are displayed.
To manually scan for available Wi-Fi networks, tap > Scan.
3. Tap a Wi-Fi network to connect to it.
Connecting to a Wi-Fi network using enhanced security
You may need to install a network certificate (*.p12) to HTC Phone before you can
connect to a Wi-Fi network with EAP-TLS authentication protocol.
1. Save the certificate file to the root folder of the storage card.
2. Slide the Notifications panel open, and then tap > Security.
3. Tap Install from SD card.
4. Select the network certificate needed to connect to the EAP-TLS network.
5. Turn on Wi-Fi and connect to a wireless network.
Connecting to a virtual private network (VPN)
Add virtual private networks (VPNs) so you can connect and access resources inside
a secured local network, such as your corporate network.
Depending on the type of VPN you’re using at work, you may be asked to enter your
login credentials and install security certificates before you can connect to your
company’s local network. You can get this information from your network
administrator.
Also, HTC Phone must first establish a Wi-Fi or data connection before you can start a
VPN connection.
69 Internet connections
20120313_Primo UM Draft for certification only
20120313_Primo UM Draft for certification only
20120313_Primo UM Draft for certification only
20120313_Primo UM Draft for certification only
20120313_Primo UM Draft for certification only