User Manual

Table Of Contents
Changing camera settings
Open the menu panel to access and change camera settings.
To open the camera settings, press .
Self-timer (photo mode
only)
Set a time delay before your camera automatically takes
the photo.
Image adjustments Slide your finger across each of the slider bars to adjust
the exposure, contrast, saturation, and sharpness.
White balance White balance enables the camera to capture colors more
accurately by adjusting to your current lighting
environment.
ISO (photo mode only) Choose an ISO level or set it back to Auto. Higher ISO
numbers are better for taking pictures in low light
conditions.
Resolution/Video
quality (2D only)
Choose a photo or video resolution to use.
Review duration Set the time for a captured photo or video to be displayed
on the Review screen before the camera changes back to
the Viewfinder screen.
Widescreen (2D photo
mode only)
When this check box is selected (default), photo
resolutions available for selection are in 16:9 ratio and you
can use the entire Viewfinder screen to frame your subject.
When not selected, photo resolutions available for
selection are in standard 4:3 ratio.
Geo-tag photos (photo
mode only)
Select to store GPS location in your captured photos.
Auto enhance (2D photo
mode only)
Select to reduce noise when using a high ISO setting and
to automatically adjust photo brightness
Auto focus (photo mode
only)
Enables or disables centered auto focus.
Face detection (2D
photo mode only)
Select to automatically recognize faces and adjust the
focus when you take people photos. Face detection will be
turned off if you disable auto focus.
Shutter sound Select to play a sound when you press the shutter release
or record button.
Grid (photo mode only) Select to display a grid on the Viewfinder screen so you
can easily frame and center your subject before taking the
photo.
Stereo recording (video
mode only)
Select to record sound in stereo when capturing videos.
71 Camera
2011/06/07 for certification review only