User's Guide

16 Your mobile phone user guide
Before turning on your phone
Back cover
Removing the back cover
Remove the back cover to access the battery compartment, SIM card slot, and storage card
slot.
1. With the phone turned off, hold your phone securely with the front facing down.
2. Slide down the back cover lock to remove the back cover.
Replacing the back cover
1. Insert and secure the tabs of the right part of the back cover into the two openings located at
the right part of the phone’s exposed back panel.
2. Press the back cover against the phone until it is in place. You will hear a click when the back
cover is locked in place.
SIM card
The SIM card contains your phone number, service details, and phonebook/message memory.
Your phone supports both 1.8V and 3 V SIM cards.
Inserting the SIM card
1. Remove the back cover. Refer to "Removing the back cover."
2. If the battery is installed, remove the battery. Refer to "Removing the battery."
3. Locate the SIM card slot at the top of the battery compartment.
4. Insert the SIM card into the slot with its cut-off corner first and its gold contacts facing down,
and then push it in completely into the slot.
Removing the SIM card
1. Remove the back cover. Refer to "Removing the back cover."
2. If the battery is installed, remove the battery. Refer to "Removing the battery."
3. Slide the SIM card towards the direction of the battery compartment.
4. Pull out the SIM card.
Storage card
Store your pictures, music, and applications in the microSD card that came with your phone.
Inserting the storage card
1. Remove the back cover. Refer to "Removing the back cover."
2. If the battery is installed, remove the battery. Refer to "Removing the battery."
3. Slide the storage card holder to the direction of “OPEN” (etched on the storage card holder),
and then flip it open.
4. Insert the storage card with its gold contacts facing the connectors on the storage card slot
and then slide the storage card completely into the holder.
5. Close the storage card holder and then slide it to the direction of “LOCK” (etched on the
storage card holder) to lock it.