Getting Started Guide

1. Slide the back cover lock,

and then lift the back

cover from the side.

2. With your micro SIM

card’s gold contacts

facing down and cut-off

corner facing in, insert

the micro SIM into the

micro SIM slot and push it

in until it clicks into place.

3. With your microSD™

card’s gold contacts

facing down, insert the

microSD card into the

storage card slot and

push it all the way in.

4. Align the back cover to

the left side of the card

slot compartment, and

then insert the tabs into

the slots on the left.

5. Close the back cover and

press starting from the

top to the bottom. Make

sure that there are no

gaps on any side.

(Turn to the next page.)

micro SIM

microSD

Inserting your micro SIM and microSD cards

Your HTC One max

IMPORTANT: USE A STANDARD MICRO SIM ONLY.

Inserting a smaller size SIM (such as nano SIM with an

adapter or a modified SIM) may damage the card slot or

cause the card to not fit properly.

PAGE 1
Your HTC One max Inserting your micro SIM and microSD cards IMPORTANT: USE A STANDARD MICRO SIM ONLY. Inserting a smaller size SIM (such as nano SIM with an adapter or a modified SIM) may damage the card slot or cause the card to not fit properly. 1. Slide the back cover lock, and then lift the back cover from the side. micro SIM 4 5 microSD 2.
PAGE 2
6 6. Press again on the right side to secure the cover into place, and then slide the lock all the way to the closed position. Turning on your phone for the first time NOTE: Before you turn on and start using your phone, it is recommended that you charge the battery. Use only the adapter and the USB cable that came with your phone to charge the battery. Press the POWER button on the right side to turn on your phone. When you turn on your phone for the first time, you’ll be asked to set it up.