User Guide

Phone Calls 56
Note: Make sure the North American dialing option is enabled under Settings > Call > CDMA call
settings > Plus code dialing.
Note: To call someone in your contacts list, the stored phone number needs to have a "+" sign followed
by the country code, area code, and phone number.
1. Touch > .
2. Enter the first few letters of a contact name, and then touch a contact to call. If you don’t have the
number stored, touch and hold the zero key until a "+" sign appears. Then enter the country code,
area code, and phone number, and touch CALL.
The Phone dialer automatically adds your international dialing code to the number.
Note: The Phone dialer dials as is and doesn’t automatically add your international access code when
you dial a phone number that has a "+1" in front or when there’s no plus sign in front of the number.
Important: International calls may incur additional fees. Contact Sprint customer service for details.
Change the International Dialing Code
By default, the international dialing code is set to 011. When you’re traveling in another country, you can
set the international dialing code to your current location.
1. With two fingers, swipe down from the status bar, and then touch > Call.
2. Touch CDMA call settings > Plus code dialing > International dialing.
3. Enter the dialing code of the country where you’re located, and then touch OK.
Set Up Speed Dial
Your phone can store up to eight phone numbers in speed dial locations. (The number 1 is reserved for
Sprint voicemail access.)
To assign a speed dial number to a contact:
1. Touch > > People, and then touch a contact.
2. Touch > Set speed dial.
3. Touch Not assigned under Number to select the contact’s number that you want to assign to the
speed dial key.
4. Touch Not assigned under Location and then select a speed dial location.
5. Touch SAVE.
Note: If you assign a number to an already assigned speed dial location, the new phone number will
automatically replace the previous speed dial assignment.