XV6900 User Manual
Please Read Before Proceeding THE BATTERY IS NOT CHARGED WHEN YOU TAKE IT OUT OF THE BOX. DO NOT REMOVE THE BATTERY PACK WHEN THE DEVICE IS CHARGING. YOUR WARRANTY IS INVALIDATED IF YOU OPEN OR TAMPER WITH THE DEVICE’S OUTER CASING. PRIVACY RESTRICTIONS Some countries require full disclosure of recorded telephone conversations, and stipulate that you must inform the person with whom you are speaking that the conversation is being recorded.
Disclaimers THE WEATHER INFORMATION, DATA AND DOCUMENTATION ARE PROVIDED “AS IS” AND WITHOUT WARRANTY OR TECHNICAL SUPPORT OF ANY KIND FROM HTC.
SAFETY PRECAUTIONS FOR POWER SUPPLY UNIT • Use the correct external power source A product should be operated only from the type of power source indicated on the electrical ratings label. If you are not sure of the type of power source required, consult your authorized service provider or local power company. For a product that operates from battery power or other sources, refer to the operating instructions that are included with the product.
ear), hypersensitivity to sound and distorted hearing. Individual susceptibility to noise-induced hearing loss and other potential hearing problems varies. The amount of sound produced by a portable audio device varies depending on the nature of the sound, the device, the device settings and the headphones. You should follow some commonsense recommendations when using any portable audio device: • Set the volume in a quiet environment and select the lowest volume at which you can hear adequately.
ENVIRONMENT RESTRICTIONS Do not use this product in gas stations, fuel depots, chemical plants or where blasting operations are in progress, or in potentially explosive atmospheres such as fuelling areas, fuel storehouses, below deck on boats, fuel or chemical transfer or storage facilities, and areas where the air contains chemicals or particles, such as grain, dust, or metal powders. Please be aware that sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.
NONIONIZING RADIATION Your device has an internal antenna. This product should be operated in its normal-use position to ensure the radiative performance and safety of the interference. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, it is recommended that no part of the human body be allowed to come too close to the antenna during operation of the equipment. Use only the supplied integral antenna.
• Avoid pushing objects into product Never push objects of any kind into cabinet slots or other openings in the product. Slots and openings are provided for ventilation. These openings must not be blocked or covered. • Mounting accessories Do not use the product on an unstable table, cart, stand, tripod, or bracket. Any mounting of the product should follow the manufacturer’s instructions, and should use a mounting accessory recommended by the manufacturer.
Contents Chapter 1 Getting Started 1.1 1.2 1.3 1.4 1.5 1.6 1.7 Getting to Know Your XV6900 and Accessories ...................................... 14 The Battery and the Storage Card ............................................................ 17 Starting Up ................................................................................................. 20 The Today Screen ....................................................................................... 21 TouchFLO™ ...............................
5.4 5.5 5.6 Synchronizing With Your Computer ......................................................... 61 Synchronizing via Bluetooth .................................................................... 62 Synchronizing Music and Video ............................................................... 62 Chapter 6 Organizing Contacts, Appointments, Tasks, and Other Information 6.1 6.2 6.3 6.4 6.5 Contacts ...................................................................................................
10.4 Bluetooth .................................................................................................. 108 10.5 Using Your XV6900 As a Modem (BroadbandAccess Connect) ............ 111 Chapter 11 Experiencing Multimedia 11.1 11.2 11.3 11.4 Camera ...................................................................................................... 120 Camera Album .......................................................................................... 126 Pictures & Videos.................
Chapter 1 Getting Started 1.1 Getting to Know Your XV6900 and Accessories 1.2 The Battery and the Storage Card 1.3 Starting Up 1.4 The Today Screen 1.5 TouchFLO™ 1.6 Programs 1.
Getting Started 1.1 Getting to Know Your XV6900 and Accessories Front panel Notification LEDs Left LED: Shows Green and Amber lights for CDMA standby, message, and network status as well as for notification and battery charging status. Right LED: Shows a flashing Blue light when the Bluetooth system is powered up and ready to transmit Bluetooth radio signal. Earpiece Listen to a phone call from here. Touch Screen TALK Press to answer an incoming call or dial a number.
Getting Started 15 Top panel POWER Press to turn off the display temporarily. To turn off the power, press and hold for about 5 seconds. For more information, see “Starting Up” in this chapter. Right panel Left panel Stylus Volume Slider • Slide up or down to adjust the speaker volume. • During a call, slide up or down to adjust the earpiece volume. Storage Card Slot Cover Remove the back cover and then pry open the slot cover to install the microSD card (not included) for storing data.
Getting Started Accessories 1 2 3 4 5 No. Accessory Function 1 AC adapter Recharges the battery. 2 Mini USB Cable Connects your XV6900 to a PC and synchronizes data. 3 USB Splitter Cable Lets you connect the supplied power adapter and your stereo headset to the device. This allows you to charge the battery on your XV6900 or synchronize the device with your PC, and at the same time, listen to audio media. 4 Pouch Acts as a protective carrying case for your XV6900.
Getting Started 17 The USB Splitter Cable Use the supplied USB Splitter Cable when you want to charge the battery on your XV6900, and at the same time, use a standard 2.5mm stereo headset (sold separately) for hands-free conversation or for listening to music. 1. Connect the USB Splitter Cable to XV6900’s Sync connector. 3. Connect the AC adapter to the splitter cable’s power connector. 2. Connect a 2.5mm stereo headset (sold separately) to the splitter cable’s audio jack. 1.
Getting Started Install the battery To remove the back cover Before installing the battery or storage card, you have to remove the back cover. 1. Make sure your XV6900 is turned off. 2. Slide the back cover upward. To install the battery 1. Install the battery by inserting it with its exposed copper part aligned with the protruding copper conductor on the upper right side of the battery compartment. Insert the right side of the battery first, then gently push the battery into place. 2.
Getting Started 19 To check the battery power 1. Power on your XV6900. 2. Do one of the following: • Tap the Battery icon ( ) on the title bar of the Today screen. • Alternatively, tap Start > Settings > Systems tab > Power. Low battery When the low-battery warning appears, do the following: • Immediately save your current data. • Synchronize with your PC or connect the power adapter to charge the battery. • Turn off your XV6900. Install the microSD card (not included) 1. Remove the back cover. 2.
Getting Started 1.3 Starting Up After inserting the battery, you can now power on and start using your XV6900. Turn your XV6900 on and off To turn on the power • Press the POWER button. When you turn on your XV6900 for the first time, a Quick Start Wizard will guide you through the calibration process and the setup of regional settings, date and time, and password. For more information about touch screen calibration, see “Calibrate the device”.
Getting Started 21 1.4 The Today Screen The Today screen displays important information, such as upcoming appointments and status indicators. You can tap a section on the screen to open the associated program. Connection status Notification Signal strength Adjust volume Battery status Open Quick Menu (See “Quick Menu” in this chapter for details.) Open Start Menu. HTC Home (See “HTC Home” in this chapter for details.) Your upcoming appointments. • To access the Today screen, tap Start > Today.
Getting Started The Start Menu The Start menu, located at the top left corner of the Today screen, displays a list of programs. You can start a program by scrolling through the programs list and then pressing ENTER, or by tapping a program with the stylus. Open a recently-used program. Switch to the Today screen. Open a program. (The items displayed in the Start menu can be customized by tapping Start > Settings > Personal tab > Menus.) Access more programs. View and change settings.
Getting Started 23 The Home tab Home displays the current day, date and local time. When you have new incoming messages and calls, it shows you the number of new e-mails, text messages, and missed calls. If you have set up the alarm, it also shows the Alarm icon. Time display. Touch this display area when you want to change the date or time, or to enable the alarm. Current day and date. Alarm icon. Number of missed calls. Touch this icon to view the Call History. Number of new e-mails.
Getting Started Note If you have not connected to the Internet and downloaded weather information for five days, the following error message will be displayed: "Unable to retrieve data for selected city. Select here to retry." Use the data connection to connect your XV6900 to the Internet, then touch the area that shows the error message to download weather data. You can also customize weather settings through the following steps: 1. Touch the area that shows the city name. 2.
Getting Started 25 The Sound tab Sound lets you quickly set the device volume and change the ring tone of your XV6900. Silent Vibrate Normal Automatic Tap to change the ring tone. • Tap the sound mode icon to set the device to Normal, Silent, Vibrate, or Automatic mode. • Touch the Ringtone area to open the phone sound settings to change the ring tone. Note Tap the Automatic icon to set the device volume to Automatic mode.
Getting Started To navigate Touch Cube Touch Cube is a three-dimensional, cubic user interface. To flip the interface from one side to another, slide your finger left or right on the touch screen. Touch Cube screens There are three sides to the Touch Cube interface: • On the first side of the interface, you can add up to nine favorite contacts. If you make calls to certain people frequently, you can add them as favorite contacts for quicker access.
Getting Started 27 Note When you have different phone numbers assigned to the same contact, an icon appears on the top left corner of the contact square to tell you which number is assigned to the particular square: mobile phone ( ), work phone ( ), or home phone ( ). • The second side of the interface provides quick shortcuts to your e-mail messages, text messages, the Internet, and other applications. Simply touch the icons on the screen to open the corresponding program.
Getting Started • Slide your finger downward to scroll up the screen. • Slide your finger upward to scroll down the screen. • To scroll towards the left, slide your finger to the right. • To scroll towards the right, slide your finger to the left. • While the screen is scrolling, you can stop the scrolling by pressing your finger on the touch screen. Note Scrollbars shown on the screen indicate that there are more content that cannot entirely fit on the screen.
Getting Started 29 Tip If you slide to the right and you are on the first e-mail message, or slide to the left and you are on the last e-mail message, you will be returned to the e-mail list screen. To random access in Contacts When you open the Contacts list, the Random Access bar allows you to quickly scroll through the list. Random Access bar On the Random Access bar, tap a letter or scroll to a letter to contacts beginning with that letter.
Getting Started 1.6 Programs The following are programs that are preinstalled on your XV6900. Programs in the Start Menu Icon Description Calculator Perform basic arithmetic and calculations, such as addition, subtraction, multiplication, and division. File Explorer Organize and manage files on your XV6900. Get Applications Link you to a Web site where you can purchase and download programs that you can install on your XV6900.
Getting Started 31 Icon Description Pictures & Videos View, organize, and sort pictures, animated GIFs (Graphics Interchange Format), and video files on your XV6900 or a storage card. Running Programs Allow you to check which programs are currently running and stop running programs to free up memory space. Search Search contacts, data, and other information on your XV6900. Tasks Keep track of your tasks. Text Messages Retry Resend SMS messages that failed delivery.
Getting Started System tab Icon Description About This is where you can see basic information such as the Windows Mobile version and type of processor used on your XV6900. You can also specify a name for your XV6900. Backlight Set the backlight timeout and adjust brightness. Certificates See information about certificates that are installed on your XV6900. Clear Storage Tap this icon only when you need to remove all your data and files from the memory and reset your XV6900 to factory default settings.
Getting Started 33 Connections tab Icon Description Beam Set your XV6900 to receive incoming Bluetooth beams. Bluetooth Turn Bluetooth on, set your XV6900 to visible mode, and scan for other Bluetooth devices. Comm Manager Manage your XV6900’s connections (including Bluetooth and ActiveSync), turn the phone on or off, switch to ringer/vibration mode, enable or disable the Direct Push function, and more.
Getting Started
Chapter 2 Entering and Searching Information 2.1 Entering Information 2.2 Using the On-screen Keyboard 2.3 Using Touch Keypad or Touch Keyboard 2.4 Using Letter Recognizer 2.5 Using Block Recognizer 2.6 Using Transcriber 2.
Entering and Searching Information 2.1 Entering Information When you start a program or select a field that requires text or numbers, the Input Panel icon becomes available on the menu bar. Tap the Input Selector arrow (that appears next to the Input Panel icon) to open a menu where you can select a text input method and customize input options. After selecting a text input method, the corresponding Input Panel is then displayed and you can use it to enter text.
Entering and Searching Information 37 2.3 Using Touch Keypad or Touch Keyboard Touch Keypad simulates a wireless phone keypad on the touch screen to allow you to enter text, numbers, and symbols just as if you were using a wireless phone keypad. Touch Keyboard simulates a 20-key QWERTY (typewriter) keyboard on the touch screen to allow you to enter text, numbers, and symbols similar to the way you would using a QWERTY keyboard.
Entering and Searching Information Use XT9 mode To enter a word in XT9 mode, press the keys that contain the letters you want. As you enter letters, XT9 analyses your keypresses and attempts to complete the word. If there is more than one choice in the XT9 dictionary for your entry, a list of available words is displayed in the candidate word list (at the top of the keypad or keyboard). For example, to enter the word “shoe” in Touch Keypad, tap , , , .
Entering and Searching Information 39 2.5 Using Block Recognizer With Block Recognizer, you use a single stroke to write letters, numbers, symbols, and punctuation, which are then converted into typed text. To use Block Recognizer 1. From a program, tap the Input Selector arrow, and tap Block Recognizer. 2. Write characters, numbers, and symbols in the designated writing area. • Enter letters by writing in the abc (left) area of the box. • Enter numbers by writing in the 123 (right) area of the box.
Entering and Searching Information 2.7 Searching Information You can search for files and other items stored in My Documents folder or on an installed storage card of your XV6900. You can search by file name or by words located in the item. For example, you can search in e-mail messages, notes, appointments, contacts, and tasks, as well as in online Help. To search for a file or an item 1. Tap Start > Programs > Search. 2.
Chapter 3 Using Phone Features 3.1 Using the Phone 3.2 Making a Call 3.3 Receiving a Call 3.4 Smart Dialing 3.
Using Phone Features 3.1 Using the Phone Like a standard mobile phone, you can use your device to make, receive, and keep track of calls and send messages. The Phone screen From the Phone screen, you can access Call History, Speed Dial, and Phone settings. To open the Phone screen, do one of the following: • Tap Start > Phone; or TALK button • Press the TALK button. Turn the phone function on and off In many countries, you are required by law to turn off the phone while on board an aircraft.
Using Phone Features 43 3.2 Making a Call With your device, you can make a call from Phone, Contacts, Speed Dial, and Call History. Make a call from Phone 1. Tap Start > Phone or press the TALK button. 2. On the Phone keypad, simply touch the keys with your finger or tap the keys using the stylus to enter the phone number. 3. Press the TALK button on your device to place the call. Tip If you tap a wrong number, tap Delete ( ) to erase each subsequent digit of a number.
Using Phone Features One-touch Speed Dial Use Speed Dial to call frequently-used numbers with a single tap. For example, if you assign a contact to the location 2 in Speed Dial, you can simply tap and hold the key on the Phone screen to dial the contact’s number. To create a Speed Dial entry Before you can create a Speed Dial entry, the number must already exist in Contacts. 1. On the Phone screen, tap Menu > Speed Dial. 2. Tap Menu > New. 3. Tap a contact.
Using Phone Features 45 To put a call on hold Your device notifies you when you have another incoming call, and gives you the choice of rejecting or accepting the call. If you are already on a call and accept the new call, you can choose to switch between the two callers, or set up a conference call between all three parties. 1. Tap Answer to take the second call, and put the first one on hold. 2. To end the second call and return to the first call, tap End or press END on the device.
Using Phone Features 3.4 Smart Dialing Smart Dialing makes it easy for you to dial a phone number. When you start entering a phone number or contact name, Smart Dialing will automatically search and sort the Smart Dialing panel contact entries in Contacts and the phone numbers in Call History (including incoming, outgoing, and missed calls). You can then select the desired number or contact from the filtered list to dial.
Using Phone Features 47 Tap and hold the contact to pop up the shortcut menu. Tip To view or edit information associated with the selected contact, tap the contact’s name on the shortcut menu (applies only to entries stored in Contacts on your device). Set up Smart Dialing 1. On the Phone screen, tap Menu > Smart Dialing Options. 2. On the Options tab, select the Enable Smart Dialing check box.
Using Phone Features
Chapter 4 Setting Up Your XV6900 4.1 Basic Settings 4.2 Personalizing the Today Screen 4.3 Customizing Phone Services 4.
Setting Up Your XV6900 4.1 Basic Settings Time and date To set the time and date 1. Tap Start > Settings > System tab > Clock & Alarms > Time tab. 2. Select the correct time zone and change the date or time. Note During synchronization, the time on your XV6900 is updated with the time on your PC. To set the time and date for a different location If you visit or communicate with someone in a particular time zone often, you can select it as your visiting time zone. 1.
Setting Up Your XV6900 51 Device name The device name is used to identify your XV6900 in the following situations: • Synchronizing with a PC • Connecting to a network • Restoring information from a backup Note If you synchronize multiple devices with the same PC, each device must have a unique name. To change the device name 1. Tap Start > Settings > System tab > About. 2. Tap the Device ID tab. 3. Enter a name.
Setting Up Your XV6900 To choose how to be notified about events or actions 1. Tap Start > Settings > Personal tab > Sounds & Notifications. 2. On the Sounds tab, choose how you want to be notified by selecting the appropriate check boxes. 3. On the Notifications tab, in Event, tap an event name and choose how you want to be notified by selecting the appropriate check boxes. You can choose from several options, such as a special sound, a message, or a flashing light.
Setting Up Your XV6900 53 4. Do any of the following: • Select Next appointment to show only the next appointment in your schedule, or Upcoming appointments to show multiple appointments. • Clear the Display all day events check box if you do not want to display all-day events. For more information about using Calendar, see Chapter 6 and 8.
Setting Up Your XV6900 4.3 Customizing Phone Services To access phone settings and services • Tap Start > Phone, then tap Menu > Options on the Phone screen; or • Tap Start > Settings > Phone. To enable optional phone services Optional phone services can be easily activated and used on your XV6900 if provided by your wireless service provider. Some of these services may not be available on your XV6900. Contact your service provider first to ask about the availability of these services. 1.
Setting Up Your XV6900 55 4.4 Protecting Your XV6900 Protect your XV6900 with a password You can prevent unauthorized access to your XV6900 by using password protection. To keep your data more secure, you can set your XV6900 to prompt for a password every time the device is turned on or when your XV6900 has been idle after a specified amount of time. To set a device password 1. Tap Start > Settings > Personal tab > Lock. 2.
Setting Up Your XV6900
Chapter 5 Synchronizing Information With Your Computer 5.1 About Synchronization 5.2 Setting Up Windows Mobile® Device Center on Windows Vista® 5.3 Setting Up ActiveSync® on Windows XP® 5.4 Synchronizing With Your Computer 5.5 Synchronizing via Bluetooth 5.
Synchronizing Information With Your Computer 5.1 About Synchronization You can take information from your computer wherever you go by synchronizing them to your XV6900.
Synchronizing Information With Your Computer 59 Note Choose Connect without setting up your device if you only want to transfer media files, check for updates, and explore the device but not sync Outlook information. 4. Select the items you want to synchronize, then click Next. 5. Enter a device name and click Set Up. When you finish the setup wizard, Windows Mobile Device Center synchronizes your XV6900 automatically.
Synchronizing Information With Your Computer 5.3 Setting Up ActiveSync® on Windows XP® The Getting Started Disc that comes with your XV6900 contains Microsoft ActiveSync 4.5 or later. Follow the steps in this section to install and set up ActiveSync on Windows XP or other compatible Windows systems. Note For a list of compatible Windows systems, please go to http://www.microsoft.com/windowsmobile/activesync/activesync45.mspx. Install ActiveSync 1.
Synchronizing Information With Your Computer 61 5.4 Synchronizing With Your Computer Connect and synchronize your XV6900 with your PC using the USB cable or Bluetooth connection. Start and stop synchronization You can manually synchronize either from your XV6900 or PC. From your XV6900 • Tap Start > Programs > ActiveSync., then tap Sync. To end synchronization before it completes, tap Stop. Tip To delete a partnership with one PC completely, disconnect the device from that PC first.
Synchronizing Information With Your Computer 5.5 Synchronizing via Bluetooth You can connect and synchronize your XV6900 with the PC using Bluetooth. To synchronize with a computer via Bluetooth 1. Set up Windows Mobile Device Center or ActiveSync on your PC to synchronize through Bluetooth. See the program’s Help for instructions. 2. On your XV6900, tap Start > Programs > ActiveSync. 3. Make sure that Bluetooth on both your XV6900 and the computer are turned on and set to visible mode.
Chapter 6 Organizing Contacts, Appointments, Tasks, and Other Information 6.1 Contacts 6.2 Calendar 6.3 Tasks 6.4 Notes 6.
Organizing Contacts, Appointments, Tasks, and Other Information 6.1 Contacts Contacts is your address book and information storage for the people and businesses you communicate with. Store phone numbers, e-mail addresses, home addresses, and any other information that relates to a contact, such as a birthday or an anniversary date. You can also add a picture or assign a ring tone to a contact. From the contact list, you can quickly communicate with people.
Organizing Contacts, Appointments, Tasks, and Other Information 65 To group similar contacts You can group similar contacts for easier management by assigning them to categories. 1. Create a new Outlook contact or edit an existing Outlook contact. 2. Tap Categories. 3. Select a preset category such as Business or Personal, or tap New to create your own category. 4. When finished, tap OK. To view contacts by category • Tap Menu > Filter then select the desired category.
Organizing Contacts, Appointments, Tasks, and Other Information 6.2 Calendar Use Calendar to schedule appointments, including meetings and other events. Your appointments for the day can be displayed on the Today screen. If you use Outlook on your PC, you can synchronize appointments between your XV6900 and PC. You can also set Calendar to remind you of appointments with a sound or flashing light, for example.
Organizing Contacts, Appointments, Tasks, and Other Information 67 View appointments By default, Calendar displays appointments in Agenda view. You can also look at your appointments in Day, Week, Month, and Year views. The highlighted hours here indicate the time of your appointments. Tap to view appointment details. Tap to switch views. Agenda view • To see detailed appointment information in any view, tap the appointment.
Organizing Contacts, Appointments, Tasks, and Other Information 6.3 Tasks Use Tasks to keep track of things you need to do. A task can occur once or repeatedly (recurring). You can set reminders for your tasks and you can organize them using categories. Your tasks are displayed in a task list. Overdue tasks are displayed in red. To create a task 1. Tap Start > Programs > Tasks. 2. Tap Menu > New Task, enter a subject for the task, and fill in information such as start and due dates, priority, and so on.
Organizing Contacts, Appointments, Tasks, and Other Information 69 To locate a task When your list of tasks is long, you can display a subset of the tasks or sort the list to quickly find a specific task. 1. Tap Start > Programs > Tasks. 2. In the task list, do one of the following: • Sort the list. Tap Menu > Sort By, and tap a sort option. • Filter the list by category. Tap Menu > Filter, and tap the category you want displayed.
Organizing Contacts, Appointments, Tasks, and Other Information To change recording formats 1. Tap Start > Settings > Personal tab > Input. 2. Tap the Options tab, and select the desired format you want in the Voice recording format list. 3. Tap OK. Note You can also change recording formats from within Notes. In the note list, tap Menu > Options > Global Input Options link (at the bottom of the page), then tap the Options tab. 6.
Chapter 7 Exchanging Messages 7.1 Messaging 7.2 Text Messages 7.3 MMS Messages 7.4 Setting Up E-mail Accounts 7.
Exchanging Messages 7.1 Messaging Messaging is where your text messages (SMS) and e-mails are located. When you receive new messages, you can open them from the Today screen. Simply tap the type of message that you want to open. New e-mail messages New text messages To select a messaging account • Tap Start > Messaging. The Account Picker screen then appears where you can select an account.
Exchanging Messages 73 7.2 Text Messages Send text messages To compose and send a text message 1. You can select a contact either from TouchFLO’s Touch Cube or from Contacts. Select a favorite contact from TouchFLO’s Touch Cube: a. Open Touch Cube by sliding your finger upward, starting from the logo at the bottom of the touch screen. (See Chapter 1 for detailed instructions.) b. Slide your finger left or right to rotate the cube and navigate to the screen where it shows your favorite contacts. c.
Exchanging Messages To reply to or forward a text message 1. Select or open the message. 2. Tap Reply, or Menu > Reply All, or Menu > Forward. To automatically resend text messages that failed delivery If text messages were not successfully sent due to network problem or loss of signal coverage, they will be queued in the Text Messages Retry program and automatically resent. While text messages remain queued, you can choose to delete some or all of them by following these steps: 1.
Exchanging Messages 75 Change MMS settings When you send an MMS message, a notification (text message) will first be sent to the recipient, while your MMS message will be temporarily stored on an MMS server of your wireless service provider. When others send you an MMS message, similarly, the MMS message will be stored on the MMS server until you retrieve it. Hence, your device must be configured with the location of the MMS server for you to be able to send and receive MMS messages on your device.
Exchanging Messages Create and send MMS messages After configuring the required settings, you can start to compose and send MMS messages. To compose an MMS message You can compose MMS messages in a combination of various slides, where each slide can consist of an image or video clip, audio, and/or text. 1. On the MMS screen, do one of the following: • Tap Menu > New > New Flix Message to create an MMS message containing video and text, then skip to step 3.
Exchanging Messages 77 To add an audio clip to an MMS message You can add an audio clip to a pix message. 1. While composing a pix message, tap Tap here to insert an audio clip. Open the folder that contains audio files. When navigating folders, tap the Down arrow ( to the upper folder. ) to return 2. Select an audio file. When selected, you can: • Tap • Tap to insert it into your MMS message, or tap message.
Exchanging Messages 7.4 Setting Up E-mail Accounts Types of E-mail Accounts You can set up the following types of e-mail accounts on your device: • Outlook e-mail that you sync with your PC or the Exchange Server. • E-mail account that you have from an Internet Service Provider (ISP). • Web-based e-mail accounts such as Yahoo!® Mail, AOL®, etc. • Work account that you access using a VPN connection.
Exchanging Messages 79 To specify e-mail server settings If Auto Setup is unsuccessful, contact your ISP or e-mail provider for the Incoming mail server and outgoing mail server settings so you can enter them on your device. Other options that you can select include the following: • Select the Outgoing server requires authentication check box, if required by your provider.
Exchanging Messages 7.5 Using E-mail After setting up e-mail accounts on your device, you can start sending and receiving e-mail messages. Create and send messages To compose and send a message 1. You can select a contact either from TouchFLO’s Touch Cube or from Contacts. Select a favorite contact from TouchFLO’s Touch Cube: a. Open Touch Cube by sliding your finger upward, starting from the logo at the bottom of the touch screen. (See Chapter 1 for detailed instructions.) b.
Exchanging Messages 81 To add an attachment to a message 1. In the message that you are composing, tap Menu > Insert and tap the item you want to attach: Picture, Voice Note, or File. 2. Select the file you want to attach, or record a voice note. Filter the Inbox message list When the Inbox on your device is full of messages, it may be hard to browse and locate a desired message. You can filter your Inbox to only display the messages that contain a particular sender or subject you are searching for.
Exchanging Messages To reply to or forward a message 1. Open the message and tap Menu > Reply, Menu > Reply All, or Menu > Forward. 2. Enter your response then tap Send. Tip Whenever you reply to all the recipients of an Outlook e-mail, your own e-mail address will also be added to the recipient list. You can customize ActiveSync so that your e-mail address will be excluded. To do so, tap Menu > Options in ActiveSync, select the E-mail item, tap Settings, then tap Advanced.
Exchanging Messages 83 Customize e-mail settings To change the download size and format for Outlook e-mail 1. Disconnect your device from the computer. 2. Tap Start > Programs > ActiveSync. 3. Tap Menu > Options, select E-mail, then tap Settings. 4. On the E-mail Sync Options screen: • Under Download size limit, select the desired e-mail size. • Under Message format, select HTML or Plain text. 5. Close ActiveSync and reconnect your device to the computer.
Exchanging Messages
Chapter 8 Working With Company E-mail and Meeting Appointments 8.1 Synchronizing Your XV6900 with the Exchange Server 8.2 Working With Company E-mail 8.3 Managing Meeting Requests 8.4 Finding Contacts in the Company Directory 8.
Working With Company E-mail and Meeting Appointments 8.1 Synchronizing Your XV6900 with the Exchange Server To keep up-to-date with your company e-mail while you’re out of the office, you can connect your XV6900 to the Internet wirelessly and synchronize it with your company’s Exchange Server. You can also access your company address book anytime. Your company must have a mail server that is running Microsoft Exchange Server with Exchange ActiveSync.
Working With Company E-mail and Meeting Appointments 87 8.2 Working With Company E-mail Your XV6900 gives you instant access to your company e-mail and lets you manage your messages easier. Direct Push, Fetch Mail, Remote e-mail search, and e-mail flags are just some of the tools you can use to manage your e-mails. Note Some messaging features depend on the Microsoft Exchange Server version used in your company. Please check with your network administrator for the availability of these features.
Working With Company E-mail and Meeting Appointments Instant download through Fetch Mail The Fetch Mail feature downloads an entire e-mail immediately without the need for you to perform a full Send/Receive action. This limits the download to just the e-mail message that you want and helps save data cost. Requirement Fetch Mail works for your XV6900 only if your company is using Microsoft Exchange Server 2007 or higher. 1. Tap Start > Messaging > Outlook E-mail. 2. Tap an e-mail message to open it. 3.
Working With Company E-mail and Meeting Appointments 89 To flag or unflag message 1. Tap Start > Messaging > Outlook E-mail. 2. Select a message or open a message. 3. Tap Menu > Follow Up and select one of the following options: Note • Set Flag Mark the message with a red flag to indicate that it needs follow up. • Complete Flag Mark the message with a check mark to indicate that the issue or request in the e-mail is already completed. • Clear Flag Remove the flag to unmark the message.
Working With Company E-mail and Meeting Appointments 8.3 Managing Meeting Requests When you schedule and send meeting requests from your XV6900, you can invite attendees to your meeting and check their status to know about their availability. When you receive a meeting request, you can reply by accepting or declining the request. The meeting request also clearly indicates whether or not there are conflicting or adjacent meetings.
Working With Company E-mail and Meeting Appointments 91 8.4 Finding Contacts in the Company Directory In addition to having contacts on the device, you can access contact information from your organization’s Company Directory. By having over-the-air access to the Company Directory, you can easily send e-mail messages and meeting requests to anyone in your company.
Working With Company E-mail and Meeting Appointments 8.5 E-mail Security Windows Mobile protects your Outlook e-mails through Secure/Multipurpose Internet Mail Extension (S/MIME), which allows you to digitally sign and encrypt your messages. Digitally signing a message applies your certificate with the authorization key to the message. This proves to the recipient that the message is from you and not from an impostor or a hacker, and that the message has not been altered.
Working With Company E-mail and Meeting Appointments 93 4. Do one or both of the following: • To sign all your outgoing e-mail messages so that recipients can be certain that the messages were sent by you and have not been altered in any way, select the Sign all outgoing e-mail messages check box.
Working With Company E-mail and Meeting Appointments
Chapter 9 Working With Documents and Files 9.1 Microsoft® Office Word Mobile 9.2 Microsoft® Office Excel® Mobile 9.3 Microsoft® Office PowerPoint® Mobile 9.4 Adobe Reader LE 9.5 Copying and Managing Files 9.
Working With Documents and Files 9.1 Microsoft® Office Word Mobile Microsoft® Office Word Mobile is a streamlined version of Microsoft Word. Word documents created on your PC can be opened and edited on your XV6900. You can also create and edit documents and templates in Word Mobile and save them as *.doc, *.rtf, *.txt, and *.dot files. You can have only one document open at a time. When you open a second document, the first one is saved and closed automatically. To create a Word file 1.
Working With Documents and Files 97 9.3 Microsoft® Office PowerPoint® Mobile With Microsoft® Office PowerPoint® Mobile, you can open and view slide show presentations created on your PC. Slide shows in *.ppt and *.pps format created using PowerPoint '97 and later can be viewed in PowerPoint Mobile. Many presentation elements built into the slide shows such as slide transitions and animations will play back on the device.
Working With Documents and Files • Tap the space between the arrow keys and the scrollbar with your stylus to move one screen towards the desired position. • Tap and drag the scrollbar tab to quickly scroll through pages and jump to a desired page number. • Tap Tools > Go To and select an option to go to a specific page in a multi-page PDF file. To enlarge or reduce the display size 1. Open a PDF file you want to view. 2. Tap Tools > Zoom. 3. Select In or Out to enlarge or reduce the display size.
Working With Documents and Files 99 9.5 Copying and Managing Files You can copy files between your XV6900 and PC using Windows Mobile Device Center or ActiveSync, or copy files to a storage card that is inserted on the device. You can also efficiently manage your files and folders using File Explorer. Copy files using Windows Mobile Device Center or ActiveSync Using Windows Mobile Device Center or ActiveSync, you can copy files from your PC to your XV6900 and vice versa.
Working With Documents and Files Store files to a storage card To copy files to a storage card 1. Make sure the storage card is properly inserted into the device. 2. Tap Start > Programs > File Explorer and navigate to the appropriate folder. 3. Tap and hold the file you want to copy, and tap Copy. 4. Tap the folder list (labeled My Documents by default) and tap Storage Card. 5. Tap Menu > Edit > Paste.
Working With Documents and Files 101 3. Tap Menu > Action > Extract. 4. Choose a folder in which files will be extracted to, then tap Extract. To create a zip archive 1. Tap New or File > New Archive. 2. On the Save As screen, enter a zip file name and choose a folder in which to save the zip file. You can also choose whether the zip file will be saved on the device’s main memory or a storage card. 3. Tap Save. 4. Tap Menu > Action > Add. 5. Double-tap the folder that contains the files you want to archive. 6.
Working With Documents and Files
Chapter 10 Getting Connected 10.1 Comm Manager 10.2 Connecting to the Internet 10.3 Internet Explorer® Mobile 10.4 Bluetooth 10.
Getting Connected 10.1 Comm Manager Comm Manager acts like a central switch that lets you enable or disable phone features as well as manage the connections of your XV6900 easily. To open Comm Manager • Tap Start > Programs > Comm Manager or tap Start > Settings > Connections tab > Comm Manager. 1 Off/disabled 2 On/enabled 3 4 Unavailable 5 1 Tap to switch Airplane mode on or off. Turning on Airplane mode turns off the phone and Bluetooth functions.
Getting Connected 105 3. On the Make New Connection screen, enter a name for the connection. 4. In the Select a modem list, select Cellular Line, then tap Next. 5. Enter the ISP server phone number, then tap Next. 6. Enter your user name, password, and any other information required by your ISP. 7. Tap Finish. Tips • To view help information for any screen, tap the Help icon ( ) on the Connections screen.
Getting Connected 10.3 Internet Explorer® Mobile Internet Explorer Mobile is a full-featured Internet browser, optimized for use on your device. To start Internet Explorer Mobile • Tap Start > Internet Explorer. To set a Home page 1. In the address bar on top of the Internet Explorer Mobile screen, enter the desired Web page address. Tap to open the Web page. 2. Tap Menu > Tools > Options > General tab. 3. Do one of the following: Tip • To use the displayed page as the Home page, tap Use Current.
Getting Connected 107 To change how Web pages fill the screen 1. In Internet Explorer Mobile, tap Menu > View. 2. Tap one of the following: • One Column. Arranges the content into one column that is as wide as the screen. This means that you will rarely have to scroll horizontally. • Default. Maintains a layout similar to what you see on a desktop computer, but it makes items smaller and arranges the content so that you can see most of it without having to scroll horizontally. • Desktop.
Getting Connected 10.4 Bluetooth Bluetooth is a short-range wireless communications technology. Devices with Bluetooth capabilities can exchange information over a distance of about eight meters without requiring a physical connection. Bluetooth modes Bluetooth on your device operates in three different modes: • On. Bluetooth is turned on. Your device can detect other Bluetooth-enabled devices, but not vice versa. • Off. Bluetooth is turned off.
Getting Connected 109 4. Tap Next. 5. Tap Finish. You can now exchange information with the paired device. Tips • To rename a Bluetooth partnership, tap and hold the partnership’s name on the Devices tab of the Bluetooth Settings screen, then tap Edit. • To delete a Bluetooth partnership, tap and hold the partnership’s name on the Devices tab, then tap Delete.
Getting Connected c. Create a Bluetooth partnership between your device and computer. For information about creating a partnership, see “Bluetooth partnerships”. d. In the Options tab of Bluetooth Devices, select Show the Bluetooth icon in the notification area. e. To enable your computer to receive Bluetooth beams, right-click the Bluetooth icon at the bottom-right of your computer screen and select Receive a File. 3. Now you are ready to beam. On your device, select an item to beam.
Getting Connected 111 3. If there are files contained in the Bluetooth shared folder on the other device, you will be able to see them on the Bluetooth Explorer screen. Select one or more files, then tap Menu > Edit and choose to cut or copy the files. 4. Tap Up twice. 5. Navigate to the folder where you want to paste the files on your device, then tap Menu > Edit > Paste. 10.
Getting Connected To install VZAccess Manager 1. Run Start.exe from the CD. 2. Click Next. 3. Click Install VZAccess Manager and follow the on-screen instructions to complete the installation. Set Up Internet access After installation is complete, the VZAccess Manager Setup Wizard automatically opens and walks you through the process of setting up your notebook computer for Internet access. Follow the steps below to complete the setup process. 1.
Getting Connected 113 5. VZAccess Manager will now detect and set up your XV6900. Click Next. 6. Select Data Cable and click Next. 7. Before proceeding, make sure your XV6900’s modem driver is already installed on your computer. See “To install XV6900’s modem driver” for details. If the driver has already been installed, click Next to continue. 8. A message then appears, indicating that your XV6900 has been detected. Click Yes.
Getting Connected 9. Your XV6900 is generally recognized as HTC USB Modem by VZAccess Manager. Click Next to proceed. 10. The mobile phone number that you use on your XV6900 is automatically recognized and then displayed on the next screen. Click Next. 11. You can set VZAccess Manager to automatically run whenever you start up your computer by selecting the Run VZAccess Manager at Startup check box. 12. Click Finish.
Getting Connected 115 Use VZAccess Manager to connect your notebook to the Internet After you finished setting up VZAccess Manager on your notebook, the software automatically launches. You can also manually launch VZAccess Manager whenever you want to access the Internet on your notebook. To manually launch VZAccess Manager 1. Connect XV6900 to your notebook’s USB port. 2. On your XV6900, tap Start > Programs > Modem Link, then tap Menu > Start. 3.
Getting Connected Overview of the user interface One cool feature of VZAccess Manager is that it allows you to view, send and receive SMS text messages directly on the user interface. From VZAccess Manager, you can also launch Internet Explorer, open Outlook E-mail if it is your notebook’s default e-mail software, and add shortcuts of your favorite applications.
Getting Connected 117 Text messaging Click on VZAccess Manager to use its text messaging feature. VZAccess Manager then downloads SMS text messages from your XV6900 and lists them in the TXT Messaging view. You can manage your text messages right on this screen, such as check and read incoming text messages, reply, forward, etc. Click these tabs to choose messaging functions. New incoming messages text messages appear in bold. Shows the content of a selected message.
Getting Connected
Chapter 11 Experiencing Multimedia 11.1 Camera 11.2 Camera Album 11.3 Pictures & Videos 11.
Experiencing Multimedia 11.1 Camera Taking photos and recording video clips along with audio are easy with your XV6900’s built-in camera. To open the Camera screen • Press the CAMERA button on your XV6900; or • Tap Start > Programs > Camera. CAMERA button The screen orientation automatically switches to landscape mode when you open Camera. To exit the Camera • Tap the Exit icon ( ) on the Camera screen.
Experiencing Multimedia 121 File formats supported Using the available capture modes, the camera in your XV6900 captures files in the following formats: Capture type Format Still image / Contacts Picture / Panorama / Sports / Burst JPEG Video MPEG-4 (.mp4), Motion-JPEG (.avi), H.263 (.3gp), 3GPP2 (.3g2) MMS Video MPEG-4 (.mp4), H.263 (.3gp), 3GPP2 (.3g2) Camera controls • Press CAMERA or ENTER to take a photo or contacts picture.
Experiencing Multimedia 9 7 8 Picture Theme mode Sports mode 7 Template Selector icon. In Picture Theme mode, tap to toggle among the different templates. 8 Progress indicator. In Picture Theme, Panorama, Sports and Burst modes, this shows the number of consecutive shots. 9 Exit. Tap to exit the Camera program. Zooming Before capturing a still image or a video clip, you can zoom in to make the object in focus move closer or zoom out to make the object move farther away.
Experiencing Multimedia 123 Quick Settings Panel The Quick Settings Panel provides a quick way of adjusting the most common camera settings. Tap on the screen to open the Quick Settings Panel. Keep tapping a button on the panel, for instance, Resolution, to cycle through the available settings. Note The available settings on the menu depend on the Capture mode selected. 1 4 2 5 3 1 Resolution. Available resolutions include: . See the table in the previous page for the detailed capture sizes.
Experiencing Multimedia Icon Function Assign to Contacts: Associate the photo to a selected contact. Browse: After capturing in Sports or Burst mode, the total number of consecutive shots is shown in the lower right corner of the Review screen. Tap the up/down arrow to browse through the sequence of photos. Camera settings Tap the Menu icon ( ) to open the Camera Settings screen. The Camera Settings screen allows you to configure Capture Settings and Advanced settings.
Experiencing Multimedia 125 Advanced menu • Capture Format. Select the desired file format. • Shutter Sound. Choose whether or not you want the camera to make a shutter sound when you press the ENTER or CAMERA button. • Grid (Photo mode only). Choose whether or not to show a grid on the Camera screen. Showing a grid helps you frame and centre your subject more easily and accurately. Grid • Keep Backlight. Turn the backlight on or off.
Experiencing Multimedia 11.2 Camera Album View your photos and videos using Camera Album. Camera Album offers a host of features that let you rotate images, view your images as a slide show, use images as contacts pictures, and more. Note Only files supported by your XV6900’s camera are displayed in Camera Album. To check which file formats are supported, see “Supported File Formats” in the Camera section. To open Camera Album • Tap Start > Programs > Camera Album; or • In the Camera program, tap .
Experiencing Multimedia 127 While viewing an image, you can advance to the next image or go back to the previous image; rotate the image; zoom in or out on the image, and more. To advance to the next image or go back to the previous image • Advance to the next image by sliding your finger across the screen from right to left; or • Go back to the previous image by sliding your finger from left to right. To rotate the image With your finger, make a half-circle motion on the screen.
Experiencing Multimedia Tips • When you zoom in on an image, you can double-tap the screen to automatically zoom out and fit the image to the screen. • When you zoom in on an image, touch and hold the screen so you can pan the image. To view the images as a slide show Touch to open the slide show options where you can set the transition effect, time per slide, and orientation of the images. Touch to go back to the previous image. / Touch to play or pause slideshow playback.
Experiencing Multimedia 129 For more information about copying and managing files on your XV6900, see Chapter 9. To view pictures Down arrow 1. The images in the My Pictures folder appear as thumbnails by default. 2. Select a picture and tap View. If you cannot find a picture in the default My Pictures folder, go to another folder by tapping the Down arrow ( ). To play GIF animation files 1. Select a GIF animation file (marked with a tap View. icon) and 2.
Experiencing Multimedia 11.4 Windows Media® Player Mobile You can use Windows Media® Player Mobile to play digital audio and video files that are stored on your XV6900 or on a network, such as on a Web site. Video File Formats Supported File Extensions Windows Media Video MPEG4 Simple Profile H.263 H.264 Motion JPEG .wmv, .asf .mp4 .3gp, .3g2 .mp4, .3gp, .3g2, .m4v .
Experiencing Multimedia 131 About the screens and menus Windows Media® Player Mobile has three primary screens: • Playback screen. The screen that displays the playback controls (such as Play, Pause, Next, Previous, and Volume) and the video window. You can change the appearance of this screen by choosing a different skin. • Now Playing screen. The screen that displays the Now Playing playlist. This special playlist indicates the current file being played and any files that are “queued up” to play next.
Experiencing Multimedia Playlists and Library List Content List Sync List Play media Use the Library to find and play songs, videos, and playlists that are stored on the device or removable storage card. To update the Library 1. If you are not on the Library screen, tap Menu > Library. 2. On the Library screen, tap the Library arrow (near the top of the screen), then tap the media storage that you want use, for example, Storage Card. 3.
Experiencing Multimedia 133 Troubleshooting If you encounter a problem while using the Windows Media® Player Mobile, a number of resources are available to help you troubleshoot the issue. For more information, see the Troubleshooting Windows Media® Player Mobile page at the Microsoft Web site (http://www.microsoft.com/windows/windowsmedia/player/windowsmobile/troubleshooting.aspx).
Experiencing Multimedia
Chapter 12 Managing Your XV6900 12.1 Adding and Removing Programs 12.2 Using Task Manager 12.3 Resetting Your XV6900 12.4 Managing Memory 12.5 Windows Update 12.
Managing Your XV6900 12.1 Adding and Removing Programs Before you purchase additional programs for your XV6900, make sure that they are compatible with your XV6900. To add programs 1. Download the program to your PC (or insert the CD or disk that contains the program into your PC). You may see a single *.exe file, a *.zip file, a Setup.exe file, or several versions of files for different device types and processors. Be sure to select a program designed for your XV6900 and processor type. 2.
Managing Your XV6900 137 To close running programs from the Task Manager 1. Tap the Running tab. 2. Do one of the following: • Select the check box of the programs that you want to close, and then tap Stop Selected to close them. • Tap Stop All to close all programs in the list. • Tap Menu > Stop All but Selected to close all programs except for those whose check boxes are selected. Tip You can also close running programs from the Quick Menu on the Today screen. See "Quick Menu" in Chapter 1 for details.
Managing Your XV6900 Hard reset You can also perform a hard reset (also known as a full reset). A hard reset should be performed only if a normal reset does not solve a system problem. After a hard reset, the device is restored to its default settings - the way it was when you first purchased it and turned it on. Any programs you installed, data you entered, and settings you customized on the device will be lost. Only Windows Mobile software and other pre-installed programs will remain.
Managing Your XV6900 139 12.4 Managing Memory To see how much memory is available for use, tap Start > Settings > System tab > Memory. On the Main tab, the amount of memory allocated to file and data storage versus program storage is displayed, as well as the amount of memory in use versus the available memory. To see available storage card memory, tap Start > Settings > System tab > Memory > Storage Card tab.
Managing Your XV6900 To change Windows Update options 1. Tap Start > Settings > Systems tab > Windows Update. 2. Tap Menu and select the option you want to change. • Tap Connections to change how the device connects to the Internet when checking for updates. • Tap Change Schedule to change how Windows Update checks for Windows Mobile® updates. 12.6 Battery Saving Tips How long your battery power lasts depends on battery type and how you use your XV6900.
Chapter 13 Using Other Applications 13.
Using Other Applications 13.1 Voice Speed Dial You can record voice tags so that you can dial a phone number or launch programs simply by speaking a word. Create a voice tag for a phone number 1. Tap Start > Contacts to open the Contacts list. 2. Do one of the following: • Tap and hold the desired contact, then tap Add Voice Tag. • Select the desired contact, then tap Menu > Add Voice Tag. • Tap the desired contact to open the contact’s detailed screen, then tap Menu > Add Voice Tag. 3.
Using Other Applications 143 Make a call or launch programs using a voice tag 1. Press and hold the CAMERA button, or tap Start > Programs > Voice Speed Dial. 2. After a “beep” sound, say the recorded voice tag that you have assigned to the phone number you want to call or the program you want to launch. The system will repeat the voice tag and then dial out or launch the program automatically.
Using Other Applications
Appendix A.1 Specifications A.2 Regulatory Notices A.
Appendix A.1 Specifications System Information Processor Qualcomm MSM7500™, 400MHz Memory - ROM : 256 MB - RAM : 128 MB DDR (Figures are the total ROM and RAM memory available for use and storage. Since the memory is shared by the Operating System, applications, and data, the actual available memory is less than what is written).
Appendix 147 Connections I/O Port HTC ExtUSB™ : 11-pin mini-USB and audio jack in one Full-speed USB 2.0 HTC H2Wire support (ExtUSB is a proprietary connection interface that is trademarked by HTC.) Wireless Connections Bluetooth 2.
Appendix A.2 Regulatory Notices Regulatory Agency Identifications For regulatory identification purposes, your product is assigned a model number of VOGU100. FCC ID: NM8VOGU100. IC: 4115A-VOGU100. To ensure continued reliable and safe operation of your device, use only the accessories listed below with your VOGU100. The Battery Pack has been assigned a model number of ELF0160.
Appendix 149 The ratings are not guarantees. Results will vary depending on the user’s hearing device and hearing loss. If your hearing device happens to be vulnerable to interference, you may not be able to use a rated phone successfully. Trying out the phone with your hearing device is the best way to evaluate it for your personal needs. M-Ratings: Phones rated M3 or M4 meet FCC requirements and are likely to generate less interference to hearing devices than phones that are not labeled.
Appendix The exposure standard for wireless mobile CDMA phone employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg*. The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of https://gullfoss2.fcc.
Appendix 151 Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Turn the phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
Appendix A.3 Additional Safety Information This section provides more safety information in addition to the information at the beginning of the user manual. When Driving Do Not Use The PC Functions Of Your Pocket PC While Driving Or Walking Never use the personal computer functions of your device while driving an automobile or any other moving vehicle. Always pull out of traffic and come to a stop in a legally permissible and safe location before using your device.
Appendix 153 PACEMAKERS The Health Industry Manufacturers Association recommends that a minimum separation of six (6”) inches be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research. Never come closer than six (6) inches to a person with a heart pacemaker implant when using your device.
Appendix Turn your device OFF before boarding an aircraft. Always request and obtain prior consent and approval of an authorized airline representative before using your device aboard an aircraft. Always follow the instructions of the airline representative whenever using your device aboard an aircraft, to prevent any possible interference with airborne electronic equipment.
Appendix 155 Battery Safety Your device uses a removable and rechargeable lithium ion battery. Please contact customer service for assistance should you need a replacement battery. DOs • Only use the battery and charger approved by the manufacturer. • Only use the battery for its original purpose. • Try to keep batteries in a temperature between 41°F (5°C) and 95°F (35°C). • If the battery is stored in temperatures above or below the recommended range, give it time to warm up or cool down before using.
Appendix Never allow any liquids or water to spill on an AC adapter/charger when it is connected to an AC power source. Always use the authorized AC adapter/charger to avoid any risk of bodily injury or damage to your cellular phone or battery. Never attempt to connect or disconnect the AC adapter/charger with wet hands. Always unplug the AC adapter/charger from the power source before attempting any cleaning.
Index A A2DP 109 ActiveSync - copy files 99 - install 60 - overview 30 - set up 60 - synchronize with Exchange Server 86 - synchronize with PC 61 Add and remove programs 136 Adobe Reader LE 97 Alarm 51 Answer/end a call 44 Appointment search 40 Attachment - add to e-mail 81 - download 81 B Backlight 50 Basic settings 50 Battery - battery information 17 - save battery power 140 Beam information using Bluetooth 109 Block Recognizer 39 Bluetooth - Bluetooth Explorer 30, 110 - Bluetooth file sharing 110 - Blueto
Index File Explorer 30 Find contact - Company Directory 91 - on device 65 Finger panning 27 Finger scrolling 27 Games 30 Get Applications 30 GIF animation 129 - MMS settings 75 - overview 74 - reply message 77 - view message 77 MMS Video 120 Modem Link 30 Multimedia 27, 130 Music playback - TouchFLO 27 - Windows Media Player Mobile 130 Mute 45 H N Hard reset 138 Help 30 Help search 40 Home 23 Home page (Internet Explorer) 106 HTC Home 22 Notes 30, 69 Notes search 40 Now Playing screen (Windows Med
Index 159 R Receive call 44 Record - voice note 69 - voice recording 70 Regional settings 50 Regulatory notices 148 Reply e-mail 82 Reply MMS 77 Reset - clear storage 138 - hard reset 137 - soft reset 137 Review screen (Camera) 123 Ring tone 51 Ring type 51 Running Programs 31 S Save picture from Web page 107 Screen text size 50 Search 31, 40 Secure/Multipurpose Internet Mail Extension (S/MIME) 92 Security settings (Internet Explorer) 107 Send - e-mail 80 - text message (SMS) 73 Settings 50 - camera 123 S
Index V Verify digital signature 92 Vibrate 42, 51 Video capture mode 120 View - MMS 77 View pictures 129 Voicemail 44 Voice call 43 Voice Recorder 31, 69, 70 Voice Speed Dial - create - voice tag for phone number 142 - voice tag for program 142 - make call or launch program 143 - overview 31, 142 Voice Speed Dial Switch 31 Voice tag - create - for phone number 142 - for program 142 - make call or launch program 143 Volume 42 W Weather 23 Web pages - layout 107 - text size 106 Windows Media Player Mob
