Getting Started Guide

Section 9: Getting Connected 79
To connect to a wireless network
1. After Wi-Fi has been turned on, your device then
scans for available wireless networks in your area. The
network names of the detected wireless networks
will be displayed on a pop-up message window. Tap a
wireless LAN, and then tap OK.
2. On the next pop-up message window, tap The Internet
if the wireless LAN connects your device to the Internet.
Otherwise, tap Work if the wireless LAN connects your
device to a private network.
3. If the wireless LAN is secured by a network key, enter
the key, and then tap Connect.
The next time you use your device to detect wireless
networks, you will not see the pop-up message windows,
and you will not be prompted to enter the network key of the
previously accessed wireless network (unless you perform a
hard reset, which will erase custom settings on your device).