Sprint Power Vision Smart Device Mogul™ by HTC Getting Started Guide SM www.sprint.com © 2007 Sprint Nextel. All rights reserved. SPRINT and other trademarks are trademarks of Sprint Nextel. Printed in the U.S.A.
Please Read Before Proceeding THE BATTERY MUST BE CHARGED BEFORE YOU CAN USE THE DEVICE. DO NOT REMOVE THE BATTERY PACK WHEN THE DEVICE IS CHARGING. YOUR WARRANTY IS INVALIDATED IF YOU OPEN OR TAMPER WITH THE DEVICE’S OUTER CASING. PRIVACY RESTRICTIONS Some countries require full disclosure of recorded telephone conversations, and stipulate that you must inform the person with whom you are speaking that the conversation is being recorded.
Licensed by QUALCOMM Incorporated under one or more of the following patents: 4,901,307 5,490,165 5,056,109 5,504,773 5,101,501 5,778,338 5,506,865 5,109,390 5,511,073 5,228,054 5,535,239 5,710,784 5,267,261 5,544,196 5,267,262 5,568,483 5,337,338 5,659,569 5,600,754 5,414,796 5,657,420 5,416,797 All other company, product and service names mentioned herein are trademarks, registered trademarks or service marks of their respective owners.
Table of Contents Section 1 Getting Started ...............................................................1 1.1 1.2 1.3 1.4 1.5 1.6 Setting Up Service ...................................................................... 2 Your Device ................................................................................... 6 Battery Information ................................................................. 12 Starting Up .................................................................................
Section 5 Synchronizing Information With Your Computer........41 5.1 5.2 5.3 Setting Up ActiveSync on Windows XP ............................... 42 Setting Up Windows Mobile Device Center on Windows Vista .............................................................................. 43 Synchronizing With Your Computer .................................... 45 Section 6 Organizing Contacts, Appointments, Tasks, and Other Information.........................................................47 6.1 6.2 6.3 6.
Section 9 Getting Connected ........................................................71 9.1 9.2 9.3 9.4 Comm Manager ........................................................................ 72 Internet Explorer Mobile ........................................................ 73 Using Bluetooth ........................................................................ 74 Using Wi-Fi ................................................................................. 78 Section 10 Experiencing Multimedia .........
Section 1 Getting Started In This Section 1.1 1.2 1.3 1.4 1.5 1.
1.1 Setting Up Service Setting up service on your new Mogul smart device is quick and easy. This section walks you through the necessary steps to set up your device's phone, set up your voicemail, establish passwords, and contact Sprint for assistance with your Sprint service. Setting Up Your Voicemail All unanswered calls to your device are automatically transferred to your voicemail, even if your phone is in use or turned off.
Sprint Account Passwords As a Sprint customer, you enjoy unlimited access to your personal account information, your voicemail account, and your Sprint Vision account. To ensure that no one else has access to your information, you will need to create passwords to protect your privacy. Account Password If you are the account owner, you’ll have an account password to sign on to www.sprint.com and to use when calling Sprint Customer Service.
To reach Sprint Customer Service: You can reach Sprint Customer Service many different ways: From the Phone screen, dial . Sign on to your account at www.sprint.com. Call us toll-free at 1-888-211-4727 (Consumer customers) or 1-888-788-4727 (Business customers). Write to us at Sprint Customer Service, P.O. Box 8077, London, KY 40742.
What You Need Your smart device box contains the following: Hardware Mogul Smart Device. Rechargeable battery. AC Phone Charger. USB sync cable. Stereo headset. 2.5mm Headset Adapter Two Mini USB Adapter Pouch. Stylus. 512 MB microSD memory card (preinstalled). Documentation Read This First poster. Welcome to Sprint brochure. Getting Started Guide (this guide). Setting Up Email booklet. Experience the Sprint Power Vision Network guide. Terms & Conditions. Warranty. Software License Agreement.
1.2 Your Device Front Components 1 2 3 4 5 6 7 8 9 10 11 1. Messaging Key 2. Notification LED 1 3. Earpiece 4. Notification LED 2 5. Web Key 6 12 13 Press to access your messages. Bi-color LED on the left side: Blue and Green for Bluetooth status and availability, and Wi-Fi status. When both Bluetooth and Wi-Fi are enabled, blue and green lights blink alternately. Listen to a phone call from here.
6. Hardware Keyboard 7. 8. 9. 10. 11. 12. 13. This is a QWERTY-style keyboard just like the computer keyboard. Slide the touch-screen panel to the left to reveal the keyboard. For more information, see “Using the Hardware Keyboard” in Section 2. Note: The protective film on the sliding keyboard can be removed. Touch Screen Tap the screen with the stylus to write, draw, or make a selection. Left and Right Press to perform the command shown in the label Softkeys above the button.
Left, Back and Right Components 5 6 7 8 1 2 11 3 12 4 13 14 9 1. Jog Wheel 2. OK Key 3. Voice Command Key 4. WLAN Switch 5. Camera 8 10 While on the Today screen or using applications, scroll up or down to navigate through menus or program instructions; press the wheel to carry out a selection. During a call or while playing music, scroll up or down to adjust the sound volume. Press to confirm your data entries, or to exit the program in use.
6. Flash Light 7. Speaker 8. Car Antenna Connector 9. Battery Cover Latch 10. Battery Cover 11. Power Key 12. Comm Manager Key 13. Camera Key 14. Stylus and Stylus Slot Allows you to capture images even in a dark environment. To turn on the flash, tap the Flash icon ( ) when in Camera mode. Listen to media from here. Connect your device to an external antenna if you need better reception. Press downward to release the battery cover.
Bottom Components 2 1 3 1. microSD Card Slot 2. Microphone 3. Strap Holder 4. Infrared Port 5. RESET Button 6. Sync Connector/ Earphone Jack 10 4 5 6 Insert a microSD memory card for storing data. Speak into the microphone when receiving or making a phone call or when recording a voice note. Attach a strap for carrying your device. Exchange files or data with other devices wirelessly. With the stylus, press the RESET button to soft-reset your device.
Accessories 1 2 3 4 5 6 7 8 1. AC Phone Charger 2. USB Sync cable 3. Mini-USB Stereo headset 4. microSD card Recharges the battery. Connects your device to a PC and synchronizes data. Provides a volume control slider and a Send/ End button. Press the Send/End button to pick up a call or put a call on hold; press and hold the button to end the call. The storage card is already installed in your device.
5. Two Mini USB Adapter Lets you connect the supplied AC Phone Charger and mini-USB stereo headset to your device at the same time. 6. 2.5mm Headset Lets you connect the supplied AC Phone Adapter Charger and a standard 2.5mm stereo headset to your device at the same time. 7. Pouch Comes with belt clip. Store your device in the pouch to keep it from dust and scratches. 8. Stylus An extra stylus pen is provided. 1.3 Battery Information Your device comes with a rechargeable Li-Ion polymer battery.
Installing and Charging the Battery New batteries are shipped partially charged. Before you start using your device, you need to install and charge the battery. To install the battery: 1. Press the battery cover latch downward to release the battery cover. Press the battery cover latch downward and then remove the battery cover. 2. Remove the battery cover. 3.
To charge the battery: Some batteries perform best after several full charge/ discharge cycles. The time needed to fully charge the battery is less than 4 hours. You can charge the battery in one of the following ways: Connect your device directly to an electrical outlet using the AC Phone Charger. Plug the sync cable to the USB port on your PC and to the sync connector on your device. Note: Do not remove the battery from the device while you are charging it using the AC Phone Charger.
1.4 Starting Up Turning Your Device On and Off To turn on your device, press and hold the Power Key at the right side of the device. When you turn on your device for the first time, a Quick Start Wizard will guide you through the calibration process and the setup of regional settings, date and time, and password. For more information about touch screen calibration, see “Calibrating the Device.” To turn off your device, press and hold the Power Key for a few seconds.
If your device does not accurately respond to screen taps, please follow these steps to recalibrate it: 1. Tap Start > Settings > System tab > Screen. 2. On the General tab, tap Align Screen, and follow the instructions on the screen. Key Lock It is possible to lock the buttons on the device, so that the applications may not be accidentally launched. Once you enable this feature, only the Power Key can turn on your device. To lock buttons: Tap on the Today screen.
1.5 The Today Screen The Today screen displays important information, such as upcoming appointments and status indicators. You can tap a section on the screen to open the associated program. To access the Today screen, tap Start > Today. To customize the Today screen display, including the background image, tap Start > Settings > Personal tab > Today. 1 2 34 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 1. 2. 3. 4. 5. 6. 7. 8. 9. 21 Tap to open the Start menu. Tap to view call status information.
to lock the device. The icon changes to . 10. Tap Tap Unlock on the Today screen to unlock again. 11. Reminds you of the appointment(s). Tap to open Calendar. 12. Displays the task(s) that you need to do. Tap to open Tasks. 13. Live Search allows you to quickly and efficiently search the Web through Internet Explorer. 14. Tap to connect to Sprint Mobile Software Store. 15. Tap to connect to Sprint Music Store. 16. Indicates the battery status. Tap to open the Power Settings screen. 17.
Icon Description Searching for phone service 1xRTT available EVDO available Data connection is active and transmitting data Data connection is active but idle Roaming Connection is active Connection is not active Synchronization in progress Synchronization error ActiveSync notification Wi-Fi function enabled, but device not connected to a wireless network yet Wireless network(s) detected Connecting to wireless network (arrows moving); Connected to wireless network Synchronizing via Wi-Fi Vibration mode Sou
Icon Description Bluetooth headset detected Serial USB connection active Note: The USB to PC ( ) icon appears on the Today Screen when you enable a serial USB connection between your device and computer. The Start Menu The Start menu, located at the top left corner of the Today screen, displays a list of programs. It lets you close a screen and switch from one program to another.
1.6 Programs The following are some of the icons for the programs that are already installed on your device. Programs in the Start Menu Icon Description Office Mobile Use the complete suite of Microsoft® Office applications for your mobile device. Excel Mobile Create new workbooks or view and edit Microsoft® Office Excel® workbooks. PowerPoint Mobile View Microsoft® Office PowerPoint® slides and presentations. Word Mobile Create, view, and edit Microsoft® Office Word documents.
Icon Description AudibleAir Provide you with the service to download your audiobooks and subscriptions wirelessly. AudiblePlayer Listen to the audiobooks, magazines, newspaper, and radio programs on your device. Camera Take photos or shoot video clips with accompanying audio. File Explorer Organize and manage files on your device. GetGood Launch the Web browser and connect to GoodLink to get the stuff you want. Internet Sharing Connect your computer to the Internet using your device’s data connection.
Section 2 Entering Information In This Section 2.1 2.2 2.3 2.
2.1 Using the Hardware Keyboard Your device provides you with a QWERTY keyboard, which is similar to a standard computer keyboard. Slide the screen panel to the left to reveal the keyboard.
When you slide open the hardware keyboard, the screen automatically changes to landscape view. The screen changes back to portrait view when you close the hardware keyboard. You can do the following with the QWERTY keyboard: To type lowercase letters, press the keys using your thumbs or fingers. To turn on Caps Lock mode so that you can type all uppercase letters, press the Function Key ( ) first, and then press . The Shift Key/Caps Lock LED lights up to indicate that Caps Lock mode is enabled.
2.2 Entering Information When you start a program or select a field that requires text or numbers, the Input Panel icon becomes available on the menu bar. Tap the Input Selector arrow (which appears next to the Input Panel icon) to open a menu where you can select a text input method and customize input options. After selecting a text input method, the corresponding Input Panel is then displayed and you can use it to enter text.
2.3 Using the Onscreen Keyboard The onscreen keyboard is available when text entry is possible. You can enter text by tapping keys on the keyboard that are displayed on the screen. To enter text using the onscreen keyboard: 1. In a program, tap the Input Selector arrow, and then tap Keyboard. 2. Enter text by tapping keys on the onscreen keyboard. To enlarge the onscreen keyboard: 1. Tap the Input Selector arrow, and then tap Options. 2. In the Input method list, select Keyboard. 3. Tap Large Keys. 2.
To open Symbol Pad and select a symbol: 1. Create or open a document, such as a Word document. 2. Tap the Input Selector arrow, and then tap Symbol Pad; —or— Using the hardware keyboard, press . and then press 3. Tap / on the Symbol Pad screen to browse through the pages of symbols. 4. Tap a symbol to select it and close the Symbol Pad. The selected symbol will then be inserted in your document.
Section 3 Using Phone Features In This Section 3.1 3.2 3.3 3.4 3.
3.1 Using the Phone Like a standard wireless phone, you can use your device to make, receive, and keep track of calls and send SMS messages. You can also take notes while talking and dial directly from Contacts. The Phone Screen From the Phone screen, you can access Call History, Speed Dial, and Phone settings. To open the Phone screen, do one of the following: Press the Talk Key on the device. Talk Key Use the stylus and tap Start > Phone.
To adjust the device volume: 1. Tap the Speaker icon ( ). 2. Under Volume, do the following: Adjust the phone volume ( ) or device volume ( ) by moving the slider to the desired volume level. Tap On, Vibrate, or Off to change both the system and ringer volume settings. Adjusting volume To adjust the conversation phone volume, you must do it during a call. Adjusting the volume at another time will affect the ring, notification, and MP3 sound levels.
3.2 Making a Call With your device, you can make a call from Phone, Contacts, Call History, and Speed Dial. Making a Call From the Phone Screen On the Phone screen, tap the desired phone number, and tap Talk at the lower right of the screen. If you tap a wrong number, tap the back arrow ( ) to erase individual numbers one at a time. To delete all the numbers, tap and hold the back arrow.
To dial one of the phone numbers of a contact: By default, the wireless telephone number for a contact is dialed when you make a call from Contacts. However, you can specify that a different phone number is dialed instead. 1. Tap Contacts on the Today screen. 2. Press the Navigation Control up or down to select the contact. 3. Press the Navigation Control left or right. The letters representing the number will change as you scroll through them. Making a Call From Call History 1.
Tips: To create a speed dial entry from Contacts, tap and hold the contact name, tap Add to Speed Dial, and then select an available location for the new Speed Dial. To delete a speed dial, in the Speed Dial list, tap and hold the desired entry, and then tap Delete. 3.3 Receiving a Call To answer or reject an incoming call: When you receive a phone call, a message will appear, giving you an option to either answer or ignore the incoming call. To answer the call, tap Answer, or press the Talk Key.
To set up a conference call: Conference call, or three-way calling, allows you to talk to two different people at the same time. When using this feature, the normal airtime rates will be charged for each of the two calls. 1. Place the first call, or take an incoming call. 2. Press the Talk Key to put the first call on hold, and dial a second number. 3. When you’re connected to the second party, press the Talk Key to begin the three-way call.
3.5 Phone Settings You can customize phone settings, such as the ring type and ring tone to be used for incoming calls and the keypad tone to be used when entering phone numbers. To access phone settings: Tap Start > Settings > Personal tab > Phone; —or— Tap Menu > Options on the Phone screen. To change the ring tone: 1. Tap Start > Settings > Personal tab > Phone > Phone tab. 2. In the Ring tone list, tap the sound you want to use. Tip: To use custom *.wav, *.mid, *.mp3, or *.
Section 4 Setting Up Your Device In This Section 4.1 4.
4.1 Personalizing Your Device To set an alarm: 1. Tap Start > Settings > System tab > Clock & Alarms > Alarms tab. 2. Tap and enter a name for the alarm. 3. Tap the day of the week for the alarm. You can select multiple days by tapping each desired day. 4. Tap the time to open a clock and set the time for the alarm. 5. Tap the alarm icon ( ) to specify the type of alarm you want. You can choose a flashing light, a single sound, a repeating sound, or vibration. 6.
4.2 Resetting Your Device Soft Reset Occasionally you may need to reset your device. A soft (or normal) reset of your device clears all active program memory and shuts down all active programs. This can be useful when the device is running slower than normal, or a program is not performing properly. A soft reset is also necessary after the installation of some programs. If a soft reset is performed when programs are running, unsaved work will be lost.
To perform a hard reset: 1. Press and hold both softkeys on the device. Keep these keys pressed, and at the same time, use the stylus to lightly press and hold the RESET button on the bottom of your device. Left softkey Right softkey RESET button 2. Release the stylus but keep the softkeys pressed when you see the following message on your device screen: “Do you want to erase all user data and restore to manufacture default?” 3.
Section 5 Synchronizing Information With Your Computer In This Section 5.1 5.2 5.
5.1 Setting Up ActiveSync on Windows XP The Software Installation CD that comes with your device contains Microsoft ActiveSync 4.5 or later. Follow the steps in this section to install and set up ActiveSync on Windows XP or other compatible Windows systems. Note: For a list of compatible Windows systems, please go to: http://www.microsoft.com/windowsmobile/activesync/ activesync45.mspx Installing ActiveSync 1. Insert the Software Installation CD into the disc drive on your PC. 2.
5.2 Setting Up Windows Mobile Device Center on Windows Vista Microsoft Windows Mobile® Device Center is the replacement for Microsoft® ActiveSync® on Windows Vista™. Setting up synchronization When you connect your device to your PC and start Windows Mobile Device Center for the first time, you are asked to create a Windows Mobile partnership with your device. Follow the steps below to create a partnership. 1. Connect your device to your PC. The Windows Mobile Device Center will open. 2.
Using Windows Mobile Device Center To open Windows Mobile Device Center, click Start > All Programs > Windows Mobile Device Center on your Windows Vista PC. On Windows Mobile Device Center, you can do the following: Click Mobile Device Settings to view and change synchronization settings. When you click Pictures, Music and Video > new pictures/ video clips are available for import, a wizard guides you to tag and transfer photos from your device to the Photo Gallery on your Windows Vista PC.
5.3 Synchronizing With Your Computer Connect and synchronize your device with your PC using the USB Sync cable or Bluetooth connection. Starting and stopping synchronization You can manually synchronize either from your device or PC. From your device 1. Tap Start > Programs > ActiveSync. 2. Tap Sync. To end synchronization before it completes, tap Stop. Tip: To delete a partnership with one PC completely, tap Menu > Options, tap the computer name, and then tap Delete.
Synchronizing via Bluetooth You can connect and synchronize your device with the PC using Bluetooth. 1. Set up Windows Mobile Device Center or ActiveSync on your PC to synchronize through Bluetooth. See the program’s Help for instructions. 2. On your device, tap Start > Programs > ActiveSync. 3. Make sure that Bluetooth on both your device and the computer are turned on and set to visible mode. For more information, see “Using Bluetooth” in Section 9. 4. Tap Menu > Connect via Bluetooth.
Section 6 Organizing Contacts, Appointments, Tasks, and Other Information In This Section 6.1 6.2 6.3 6.
6.1 Contacts Contacts is your address book and information storage for the people and businesses you communicate with. Store phone numbers, email addresses, home addresses, and any other information that relates to a contact, such as a birthday or an anniversary date. You can also add a picture or assign a ringer to a contact. From the Contacts list, you can quickly communicate with people. Tap a contact in the list for a summary of contact information. From there, you can call or send a message.
Organizing and searching To work with the Contacts list: There are several ways to use and customize the Contacts list. Here are a few tips: 1. Tap Contacts on the Today screen. 2. In the Contacts list, do any of the following: In Name view, you can search for a contact by entering a name or number, or by using the alphabetical index. To switch to Name view, tap Menu > View By > Name. To see a summary of information about a contact, tap the contact. From there you can also make a call or send a message.
6.2 Calendar Use Calendar to schedule appointments, including meetings and other events. Your appointments for the day can be displayed on the Today screen. If you use Outlook on your PC, you can synchronize appointments between your device and PC. You can also set Calendar to remind you of appointments with a sound or flashing light, for example. You can look at your appointments in several different views (Day, Week, Month, Year, and Agenda).
To set a default reminder for all new appointments: You can have a reminder automatically turned on for all new appointments you schedule. 1. Tap Calendar on the Today screen. 2. Tap Menu > Options > Appointments tab. 3. Select the Set reminders for new items check box. 4. Set the time you want to be alerted. 5. Tap OK to return to the calendar. Sending appointments Use Calendar to schedule meetings via email with contacts who use Outlook or Outlook Mobile. 1. Tap Calendar on the Today screen. 2.
6.3 Tasks Use Tasks to keep track of things you need to do. A task can occur once or repeatedly (recurring). You can set reminders for your tasks and you can organize them using categories. Your tasks are displayed in a task list. Overdue tasks are displayed in red. To create a task: 1. Tap Start > Programs > Tasks. 2. Tap New, enter a subject for the task, and fill in information such as start and due dates and priority. 3.
To set a default reminder for all new tasks: You can have a reminder automatically turned on for all new tasks you create. 1. Tap Start > Programs > Tasks. 2. Tap Menu > Options. 3. Select the Set reminders for new items check box. 4. Tap OK to return to the task list. Note: The new tasks must have due dates set in order for the reminder to take effect. To show start and due dates in the task list: 1. Tap Start > Programs > Tasks. 2. Tap Menu > Options. 3. Select the Show start and due dates check box. 4.
6.4 Notes Notes helps you to quickly capture thoughts, questions, reminders, to-do lists, and meeting notes. You can create handwritten and typed notes, record voice notes, convert handwritten notes to text for easy readability, and send notes to others. Entering Information in Notes There are several ways to enter information in a note. You can enter typed text by using the onscreen keyboard or handwriting recognition software. You can also use the stylus to write or draw directly on the screen.
Note: To select handwritten text, tap and hold near the text. As soon as dots appear, and before they form a complete circle, quickly drag across the text. (If a letter crosses three ruled lines, it is treated as a drawing rather than text.) To draw in a note: 1. Tap Start > Programs > Notes. 2. In the note list, tap New. 3. Draw on the screen, crossing at least three ruled lines. (A selection box labeled Drawing appears around your drawing.) 4. When you are finished, tap OK to return to the note list.
7. If you are recording in an open note, an icon will appear in the note. 8. If you are creating a stand-alone recording, the recording will appear in the note list. Tip: To quickly create a recording, press and hold the Voice Command Key, and then you can begin to record after a beep sound. Release the button when you are finished. To change recording formats: 1. Tap Start > Settings > Personal tab > Input. 2. Tap the Options tab, and in the Voice recording format list, tap the format you want. 3. Tap OK.
Section 7 Exchanging Messages In This Section 7.1 7.2 7.3 7.
7.1 Messaging Messaging is where your text (SMS) and email messages are located. When you receive new messages, you can open them from the Today screen. Simply tap the type of message that you want to open. New message(s) To select a messaging account: Tap Start > Programs > Messaging. The Account Selection screen then appears where you can select an account; —or— From within one account’s message list (for example, Text Messages), tap Menu > Go To to switch to another messaging account.
7.2 Text Messages Sending text messages 1. Tap Start > Programs > Messaging. 2. Tap Text Messages on the Account Selection screen. 3. Tap Menu > New. 4. Enter the email address or wireless phone number of one or more recipients, separating each with a semicolon. To access addresses and phone numbers from Contacts, tap To. 5. Enter your message. To quickly add common messages, tap Menu > My Text, and then tap a desired message. To check the spelling, tap Menu > Spell Check. 6. Tap Send.
7.3 Setting Up Email Accounts E-mail Setup Wizard Windows Mobile’s E-mail Setup Wizard lets you easily set up your personal and work email accounts. You can add an email account from an Internet Service Provider (ISP) or other email provider as well as Web-based accounts.
7.4 Using Email Creating and sending messages To compose and send a message: 1. Tap Start > Programs > Messaging, and then select an email account. 2. Tap New. 3. Enter the email address of one or more recipients, separating them with a semicolon. To access addresses from Contacts, tap To. 4. Enter your message. To quickly add common messages, tap Menu > My Text and tap a desired message. 5. To check the spelling, tap Menu > Spell Check. 6. Tap Send.
Viewing and replying to messages To read an incoming message: By default, only the first few kilobytes of a message are shown when you open an incoming message. To read the whole message, do one of the following: In the message list, select a message then tap Menu > Download Message; —or— Open a message. Scroll down to the end of the message then tap Get the rest of this message. The message will be downloaded the next time you tap Menu > Send/Receive to send and receive email.
To see more header information, scroll up. Tips: To always include the original message, from the list view, tap Menu > Tools > Options > Message tab, and select the When replying to e-mail, include body check box. In the Outlook Email account, you will send less data if you do not edit the original message. This may reduce data transfer costs based on your rate plan. Downloading messages The manner in which you download messages depends on the type of email account you have.
To send and receive email for a POP3 or an IMAP4 account: If you have an email account with an ISP or a work account that you access using a VPN server connection, you send and receive messages through a remote email server. Before sending and downloading messages, you need to connect to the Internet or your corporate network. 1. Tap Start > Programs > Messaging, and then select your POP3 or IMAP4 email account. 2. Tap Menu > Send/Receive. Messages on your device and email server are synchronized.
Section 8 Working With Company Email and Meeting Appointments In This Section 8.1 8.2 8.3 8.
8.1 Synchronizing Your Device with the Exchange Server To keep up-to-date with your company email and meeting schedules while you’re out of the office, you can connect your device to the Internet wirelessly and synchronize this information with your company’s Exchange Server. You can also access your company address book anytime. Your company must have a mail server that is running Microsoft Exchange Server with Exchange ActiveSync.
8. To change synchronization settings for an information type, for example, E-mail, select the type of information and tap Settings. 9. Tap Finish. Starting synchronization Before you start synchronizing with the Exchange Server, make sure your device has been set up with a data connection to the Internet so that you can synchronize wirelessly. After you finish setting up an Exchange Server connection, your device automatically starts synchronization.
To compose and send a message: 1. On the Today screen, tap the Comm Manager icon ( ). 2. On the Comm Manager screen, tap the Direct Push button . The button will turn to ; this indicates that you will receive email messages as they arrive. When the button is in the state, you need to manually retrieve your email messages. To enable Direct Push via ActiveSync: 1. In ActiveSync on your device, tap Menu > Schedule. 2. Select As items arrive in the Peak times and Off-peak times boxes.
8.3 Managing Meeting Requests When you schedule and send meeting requests from your device, you can invite attendees to your meeting and check their status to know about their availability. When you receive a meeting request, you can reply by accepting or declining the request. The meeting request also clearly indicates whether or not there are conflicting or adjacent meetings. To reply to a meeting request: 1. When you receive a meeting request, a notification will be displayed on the Today screen.
8.4 Finding Contacts in the Company Directory In addition to contacts stored on your device, you can access contact information from your organization’s Company Directory. By having over-the-air access to the Company Directory, you can easily send email messages and meeting requests to anyone in your company. 1. Synchronize with Exchange Server if you have never done so. 2. Do any of the following: In Contacts, tap Menu > Company Directory.
Section 9 Getting Connected In This Section 9.1 9.2 9.3 9.
9.1 Comm Manager Comm Manager acts as a central switcher that lets you enable or disable phone features as well as manage your data connections easily. To open Comm Manager: Tap the Comm Manager icon ( ) on the Today screen. 1 4 2 5 3 6 7 1. Tap to toggle Flight mode on or off. Turning Flight mode on turns off the phone, Bluetooth and WLAN functions. 2 Tap to toggle Bluetooth on or off. Tap Settings > Bluetooth to configure Bluetooth on your device. 3. Tap to disconnect active data connections.
9.2 Internet Explorer Mobile Internet Explorer Mobile is a full-featured Internet browser that is optimized for use on your wireless device. To start Internet Explorer Mobile: Tap Start > Internet Explorer. To choose a Home page: 1. In the address bar on top of the Internet Explorer Mobile screen, enter a Web page address. Tap to open the Web page. 2. Tap Menu > Tools > Options > General tab. 3. Do one of the following: Tap Use Current to use the displayed page as your Home page.
9.3 Using Bluetooth Bluetooth is a short-range wireless communications technology. Devices with Bluetooth capabilities can exchange information over a distance of about 10 meters without requiring a physical connection. You can even beam information to a device in a different room, as long as it is within the Bluetooth signal coverage range.
To turn Bluetooth on and make your device visible: 1. On your device, tap Start > Settings > Connections tab > Bluetooth. 2. From the Mode tab, select the Turn on Bluetooth and Make this device visible to other devices check boxes. 3. Tap OK. Note: To add an extra layer of security while beaming information with other devices, or to set up Bluetooth synchronization, tap Start > Settings > Connections tab > Bluetooth > Security tab.
7. Wait for the paired device to accept the partnership. The receiving party needs to enter the same passcode that you specified. 8. The name of the paired device is then displayed. You may edit and enter a new name for that device. 9. Select the check boxes of services that you want to use from the paired device. 10. Tap Finish. To accept a Bluetooth partnership: 1. Ensure that Bluetooth is turned on and in visible mode. 2. Tap Yes when prompted to establish a partnership with the other device. 3.
If your computer has Windows XP SP2 and your computer’s built-in or external Bluetooth adapter is supported by Windows XP SP2, open Bluetooth Devices from the Control Panel. Click the Options tab, and then select the Turn discovery on and the Allow Bluetooth devices to connect to this computer options. If the Bluetooth adapter on your computer was installed using a third-party provided driver, open the Bluetooth software that came with the Bluetooth adapter.
Note: If the device you want to beam to does not appear in the box, make sure that it is turned on and visible. To receive a Bluetooth beam: Your device will not detect and notify you of incoming Bluetooth beams unless you set it up to do this. 1. Tap Start > Settings > Connections tab > Beam. 2. Select the Receive all incoming beams check box. 3. Make sure your device is turned on, visible, and within Bluetooth range of the device that is beaming the information. 4.
To connect to a wireless network 1. After Wi-Fi has been turned on, your device then scans for available wireless networks in your area. The network names of the detected wireless networks will be displayed on a pop-up message window. Tap a wireless LAN, and then tap OK. 2. On the next pop-up message window, tap The Internet if the wireless LAN connects your device to the Internet. Otherwise, tap Work if the wireless LAN connects your device to a private network. 3.
Note: 80 Wi-Fi networks are self-discoverable, which means no additional steps are required for your device to connect to a Wi-Fi network. It may be necessary to provide a user name and password for certain closed wireless networks, however.
Section 10 Experiencing Multimedia In This Section 10.1 10.2 10.
10.1 Using the Built-in Camera Taking photos and capturing video clips along with audio is easy with the built-in camera on your device. To open the Camera screen Press and hold the Camera Key on your device. Camera Key —or— Tap Start > Programs > Camera. —or— Tap Start > Programs > Pictures & Videos > Camera icon. To exit the Camera Tap the Exit icon ( ). Capture Modes The camera on your device allows you to capture pictures and video clips by using various built-in modes with flexibility.
Current capture mode The available capture modes of the camera are as follows: Photo to capture standard still images. Video to capture video clips, with or without accompanying audio. Contacts Picture to capture a still image with the option to immediately assign it as a Photo ID for a contact. Picture Theme to capture still images and places them within frames.
Camera Controls Use the following device buttons and onscreen controls to take photos or video clips and to modify settings. The Camera Key, ENTER button, and Jog Wheel The Camera Key, ENTER button, and Jog Wheel can all be used as the shutter release. Press to take a photo or to take shots for a picture theme or panorama. Press to start recording video; press again to stop recording.
1 Mode Switching control. Tapping the left/right arrow ( / ) on the screen allows you to switch the capture mode. 2 Resolution. The resolution icon ( / / / / ) indicates the current resolution. Tap to toggle between different resolutions. 3 Storage. Tap to toggle between saving captured photos or video clips to the device memory ( ) or to the memory card ( ). 4 Remaining information indicator.
12 Self-timer. Tap to set the self-timer to 2 seconds, 10 seconds, or off when in the Photo or Contacts Picture mode. When you press the ENTER button or the Camera Key to capture a still image, the self-timer begins counting, and then captures a still image after the assigned time (2 seconds or 10 seconds). 13 Video mode 13 Recording indicator. This indicator blinks red while video recording is in progress. 14 15 Picture Theme mode 14 Progress indicator.
17 16 Panorama mode 16 Stop. The Stop icon ( ) appears only in Panorama mode. Tap this icon if you want to stop capturing the remaining shots and start composing the panorama. 17 Exit. Tap the Exit icon ( ) to exit the Camera program. Still Image Capture Modes While using Still Image capture modes, such as Photo, Contacts Picture, Picture Theme, Panorama, Sports, and Burst, you can capture one or more still images by pressing the Camera Key or Jog Wheel, or the ENTER button on the Navigation Control.
The Review Screen After taking a still image or recording a video clip, you can view the image or video clip on the Review screen. In addition, you can tap the icons at the bottom of the Review screen to delete a captured image or video, send an image or video via email, and more. Review screen icons Photo, Video, Picture Theme, and Panorama modes Contacts Picture mode 1 2 3 4 5 Sports and Burst modes 6 1 Back. Tap 2. Delete. Tap 3. Send. Tap to go back to the Camera screen.
6. Browse. After you have taken photos in Sports or Burst mode, the total number of consecutive shots is shown in the lower right corner of the Review screen. Tap the up/down arrow ( ) to browse through the sequence of photos. To change the display duration of the Review screen 1. Tap to open the Camera Settings screen. 2. On the Camera Settings screen, tap menu then appears. . The Advanced 3. Tap Review Duration, and then tap the desired time length for displaying captures on the Review screen. 10.
To play GIF animation files 1. Tap Start > Programs > Pictures & Videos. 2. Select a GIF animation file and tap View. The GIF Animation program then opens and plays the animation. To play videos with audio 1. Tap Start > Programs > Pictures & Videos. By default, the contents of the My Pictures folder will be shown. 2. To find the video clips that you captured, tap the down arrow ( ) next to the My Pictures folder and tap My Documents. Next, tap My Videos.
Tap anywhere on the screen to display the Slide Show toolbar, which you can use to stop or pause the slide show, rotate the view, and more. To sort pictures and video clips If you store a large number of pictures or video clips on your device, you may find it helpful to sort them to quickly find a specific picture or clip. You can sort by name, date, and size. 1. Tap Start > Programs > Pictures & Videos. 2.
10.3 Using Windows Media Player You can use Microsoft Windows Media Player 10 Mobile for Pocket PC to play digital audio and video files that are stored on your device or on a network, such as on a Web site. Using Windows Media Player, you can play both audio and video files. The following file formats are supported by this version of Windows Media Player. 92 Video File Formats Supported File Extensions Windows Media Video MPEG4 Simple Profile H.263 Motion JPEG 3GPP2 .wmv, .asf .mp4 .3gp .avi .
About the controls 1 234 5 6 7 8 9 The following are available controls on the Windows Media Player. Control Function 1 Displays the video in full screen. 2 Displays a Web site where you can find music and videos to play. 3 Adjusts the playback progress of a selected file. 4 Skips to the beginning of the current file or to the previous file. 5 Plays/Pauses a file. 6 Skips to the next file. 7 Decreases the volume level. 8 Increases the volume level. 9 Turns the sound on or off.
About the Screens and Menus Windows Media Player has three primary screens: Playback screen. The default screen that displays the playback controls (such as Play, Pause, Next, Previous, and Volume) and the video window. Now Playing screen. The screen that displays the Now Playing playlist. This special playlist indicates the current file being played and any files that are “queued up” to play next. Library screen. The screen that lets you quickly find your audio files, video files, and playlists.
Synchronizing video and audio files Use the latest version of Microsoft Windows Media Player on your PC to synchronize digital media files from your PC to your device. This ensures that protected files and album art are copied to your device correctly. To synchronize content to your device automatically: 1. On your PC, start Windows Media Player and then connect your device to your PC. 2. In the Device Setup Wizard, select Yes, search my computer now. 3.
To synchronize content manually to your device: 1. If you have not set up media synchronization between your device and PC, follow steps 1 to 3 in “To synchronize content to your device automatically.” 2. Click the Sync tab on the Windows Media Player of your PC. Select a Playlist or a Library on the left panel of the Windows Media Player. 3. From the Content List, drag the media files that you want to sync to your device and drop them to the Sync List. 4.
4. Select a category (for example, My Music or My Playlists). 5. Tap and hold the item that you want to play (such as a song, album, or artist name), and then tap Play. Note: To play a file that is stored on your device but is not in a library, on the Library screen, tap Menu > Open File. Tap and hold the item that you want to play (such as a file or a folder), and then tap Play.
Section 11 Using Other Applications In This Section 11.1 11.2 11.3 11.4 11.5 11.
11.1 Microsoft® Office Word Mobile Microsoft® Office Word Mobile is a streamlined version of Microsoft Word. Word documents created on your PC can be opened and edited on your device. You can also create and edit documents and templates in Word Mobile and save them as *.doc, *.rtf, *.txt, and *.dot files. You can have only one document open at a time. When you open a second document, the first one is saved and closed automatically. To create a Word file: 1. Tap Start > Office Mobile > Word Mobile. 2.
11.2 Microsoft® Office Excel Mobile Microsoft® Office Excel Mobile makes it easy for you to open and edit Excel workbooks and templates created on your PC. You can also create new workbooks and templates on your device. To create an Excel file: 1. Tap Start > Office Mobile > Excel Mobile. 2. In Excel Mobile, tap New. You’ll see either a blank worksheet or template, depending on what you’ve selected as the default template. 3. Tap a cell to select it.
11.3 Microsoft® Office PowerPoint Mobile With Microsoft® Office PowerPoint Mobile, you can open and view slide show presentations created on your PC. Slide shows in *.ppt and *.pps format created using PowerPoint '97 and later can be viewed in PowerPoint Mobile. Many presentation elements built into the slide shows such as slide transitions and animations will play back on the device. If the presentation is set up as a timed slide show, slides will advance automatically. Links to URLs are also supported.
11.4 Adobe Reader LE Adobe Reader LE allows you to open and view Portable Document Format (PDF) files. These files usually have a *.pdf file extension. To open a PDF file on your device: 1. Tap Start > Programs > Adobe Reader LE. 2. Tap Open. 3. Browse to a folder and tap the PDF file you want to view. Note: To open another PDF file, tap Menu > Open. Tap Browse, select the desired file, and tap Open. You can also open a PDF file from File Explorer.
To customize page view and orientation: 1. Open a PDF file you want to view. 2. Tap Tools > View. 3. Select an option to suit your view. To find text in a PDF file: 1. Open a PDF file you want to view. 2. Tap Tools > Find > Text. 3. Enter the text to be searched. 4. Choose search parameters, such as Match case, Whole word, Backwards, and tap Find. Adobe Reader LE offers you the following advanced features. It displays a bookmark pane for the PDF files that contain bookmarks.
Setting up Windows Live The first time you use Windows Live, sign in by using your Windows Live ID, which is your Windows Live Mail or Hotmail address, and password. 1. Tap Start > Programs > Windows Live. 2. Tap Sign in to Windows Live. 3. On the next screen, tap the links to read the Windows Live Terms of Use and Privacy Statement. After reviewing them, tap Accept. 4. Enter your Windows Live Mail or Hotmail address and password, select the Save password checkbox, and then tap Next. 5.
The Windows Live interface On the main interface of Windows Live, you will see a search bar, navigation bar, and an area you can customize to show your picture. 1 2 3 4 1 2 3 4 Live Search Bar. Tap the left or right arrow to switch between Windows Live Messenger, Live Mail, and Sync status. Tap to access Windows Live Messenger settings. Tap Menu to access and change settings.
Live Search Bar Use the Live Search Bar to easily find information on the Internet. It is integrated into the Windows Live interface. To find information on the Internet: 1. Enter your keywords in the search bar. 2. Tap or Search. Internet Explorer Mobile then launches and displays links to related Web sites. The links are organized by category. 3. Scroll through the categories and tap a link to go to the Web site where the information that you want is located.
11.6 Using Voice Speed Dial You can record voice tags so that you can dial a phone number or launch programs simply by speaking into your device. To create a voice tag for a phone number: 1. Tap Contacts on the Today screen to open the Contacts list. 2. Do one of the following: Tap and hold the desired contact, and then tap Add Voice Tag. Select the desired contact, and then tap Menu > Add Voice Tag. Tap the desired contact to open the contact’s detailed screen, and then tap Menu > Add Voice Tag. 3.
5. When you create a voice tag for the item, you can do any of the following: Tap the Record button ( ) to rebuild the voice tag. Tap the Play button ( ) to play the voice tag. Tap the Delete button ( ) to delete the voice tag. Tip: To ensure voice recognition accuracy, please record your voice in a quiet place.
Appendix In This Section A.1 A.2 A.
A.1 Regulatory Notices Regulatory Agency Identifications For regulatory identification purposes, your Mogul is assigned a model number of TITA100. FCC ID: NM8TITA100. IC: 4115A-TITA100. To ensure continued reliable and safe operation of your device, use only the accessories listed below with your Mogul. The Battery Pack has been assigned a model number of TRIN160. This product is intended for use with a certified Class 2 Limited Power Source, rated 5 Volts DC, maximum 1 Amp power supply unit.
FCC RF EXPOSURE INFORMATION In August 1996, the Federal Communications Commission (FCC) of the United States with its action in Report and Order FCC 96-326 adopted an updated safety standard for human exposure to radio frequency electromagnetic energy emitted by FCC regulated transmitters. Those guidelines are consistent with the safety standard previously set by both U.S. and international standards bodies. The design of this device complies with the FCC guidelines and these international standards.
The wireless telephone industry has developed a rating system for wireless phones, to assist hearing device users find phones that may be compatible with their hearing devices. Not all phones have been rated. Phones that are rated have the rating on their box or a label located on the box. The ratings are not guarantees. Results will vary depending on the user’s hearing device and hearing loss.
SAR Information SAR: 1.130 W/kg @1g (USA) THIS MODEL DEVICE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. For body-worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with the High Tech Computer Corp. accessories supplied or designated for this product. Use of other accessories may not ensure compliance with the FCC RF exposure guidelines. Your wireless mobile CDMA phone is a radio transmitter and receiver.
While there may be differences between the SAR levels of various devices and at various positions, they all meet the government requirement for safe exposure. The FCC has granted an Equipment Authorization for this model device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines. SAR information on this model device is on file with the FCC and can be found under the Display Grant section of https://gullfoss2.fcc. gov/prod/oet/cf/eas/reports/GenericSearch.
stations” (atmospheric and environmental conditions may cause variations in handset receiving signal strength). Also the transmission of the ALI information is subject, in part, to system constraints within the wireless network to which the E911 signal is transmitted and over which UT Starcom has no control. Finally, customers are advised that the Mogul’s ALI capability is to be used for E911 purposes only.
WEEE Notice The Directive on Waste Electrical and Electronic Equipment (WEEE), which entered into force as European law on 13th February 2003, resulted in a major change in the treatment of electrical equipment at end-of-life. The purpose of this Directive is, as a first priority, the prevention of WEEE, and in addition, to promote the reuse, recycling and other forms of recovery of such wastes so as to reduce disposal.
ELECTRICAL SAFETY This product is intended for use when supplied with power from the designated battery or power supply unit. Other usage may be dangerous and will invalidate any approval given to this product. SAFETY PRECAUTIONS FOR PROPER GROUNDING INSTALLATION CAUTION: Connecting to an improperly grounded equipment can result in an electric shock to your device. This product is equipped with a USB cable for connecting the product to a desktop or notebook computer.
SAFETY PRECAUTIONS FOR DIRECT SUNLIGHT Keep this product away from excessive moisture and extreme temperatures. Do not leave the product or its battery inside a vehicle or in places where the temperature may exceed 60°C (140°F), such as on a car dashboard, window sill, or behind a glass that is exposed to direct sunlight or strong ultraviolet light for extended periods of time. This may damage the product, overheat the battery, or pose a risk to the vehicle.
SAFETY PRECAUTIONS FOR RADIO FREQUENCY (RF) EXPOSURE Avoid using your device near metal structures (for example, the steel frame of a building). Avoid using your device near strong electromagnetic sources, such as microwave ovens, sound speakers, TV and radio. Use only original manufacturer-approved accessories, or accessories that do not contain any metal. Use of non-original manufacturer-approved accessories may violate your local RF exposure guidelines and should be avoided.
Liquid has been spilled or an object has fallen into the product. The product has been exposed to rain or water. The product has been dropped or damaged. There are noticeable signs of overheating. The product does not operate normally when you follow the operating instructions. Avoid hot areas The product should be placed away from heat sources such as radiators, heat registers, stoves, or other products (including, but not limited to, amplifiers) that produce heat.
A.2 Additional Safety Information This section provides more safety information in addition to the information at the beginning of the user manual. When Driving Do Not Use The PC Functions Of Your Smart Device While Driving Or Walking Never use the personal computer functions of your device while driving an automobile or any other moving vehicle. Always pull out of traffic and come to a stop in a legally permissible and safe location before using your device.
WARNING: Failure to follow these instructions could lead to serious personal injury and possible property damage. When Using Your Device Near Other Electronic Devices Your wireless handheld portable smart device is a low power radio transmitter and receiver. When it is ON, it receives and also sends out radio frequency (RF) signals. Most modern electronic equipment is shielded from RF energy.
For more regulatory information about hearing devices, see “FCC HearingAid Compatibility (HAC) Regulations for Wireless Devices.” OTHER MEDICAL DEVICES If you use any other personal medical device, consult the manufacturer of your device to determine if it is adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information.
POTENTIALLY EXPLOSIVE ATMOSPHERES Turn your device OFF when in any area with a potentially explosive atmosphere and obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death. Areas with a potentially explosive atmosphere are often, but not always, clearly marked.
Antenna Safety Use only the supplied or an approved replacement antenna. Unauthorized antennas, modifications, or attachments could impair call quality, damage your device, or result in violation of FCC regulations. Please contact your local dealer for replacement antenna. Do not use the device with a damaged antenna. If a damaged antenna comes into contact with the skin, a minor burn may result. Please contact your local dealer for replacement antenna.
Never touch any fluid that might leak from the built-in battery. Such liquid when in contact with the eyes or skin, could cause injury to the skin or eyes. Should the liquid come into contact with the eyes, irrigate the eyes thoroughly with clean water and immediately seek medical attention. In the event the liquid comes into contact with the skin or clothing, wash it away immediately with clean water.
A.
When sending your wireless device to UTStarcom Personal Communications for repair or service, please note that any personal data or software stored on the device may be inadvertently erased or altered. Therefore, we strongly recommend you make a back up copy of all data and software contained on your device before submitting it for repair or service. This includes all contact lists, downloads (i.e. third-party software applications, ringtones, games and graphics) and any other data added to your device.
Some states or provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of incidental or consequential damage so the above limitation or exclusions may not apply to you. This Warranty gives you specific legal rights, and you may also have other rights, which vary from state to state or province to province. IN USA: UTStarcom Personal Communications 555 Wireless Blvd.
Index
A About licenses and protected media 94 ActiveSync - overview 21 - use ActiveSync 42 Adobe Reader LE - overview 21 - use 103 Contacts 48 Contacts Picture capture mode 83 D Delete pictures and videos 91 Digital Rights Management (DRM) 94 E B Excel Mobile 21 Battery - battery information 12 - charge battery 13 - install battery 13 Bluetooth - beam 76 - create partnership 75 - overview 74 - turn on/off 74 Burst capture mode 83 F C Calculator 21 Calendar 50 Calibrate 15 Call - from Call History 33 - fro
L Library screen (Windows Media Player Mobile) 94 M Messaging - overview 22 N Notes 21, 54 Now Playing screen (Windows Media Player Mobile) 94 O Onscreen keyboard 27 Open PDF file 103 P Panorama capture mode 83 PDF 103 Personalize 38 Personal and system settings 38 Phone 21 Phone settings 36 Pictures & Videos - delete 91 - file formats 89 - overview 22 - play GIF animation 90 - play videos 90 - sort 91 - view pictures 89 - view slideshows 90 Picture Theme capture mode 83 Playback screen (Windows Media Pla
R W Regulatory notices 112 Reset device 39 Review screen (Camera) 88 Ring tone 36 Ring type 36 Wi-Fi 78 Windows Media Player Mobile - file formats 92 - menus 94 - overview 22 - troubleshoot 97 Wireless network 78 Word Mobile 21 S Search 22 Sliding keyboard 24 Sports capture mode 83 Start up 15 Still image capture modes 87 Symbol Pad 27 Synchronize 45 T Tasks 22, 52 Text size 38 Troubleshoot Windows Media Player 97 V Video capture mode 87 View - photo slideshows 90 - pictures 89 Voice mail 33 Voice Spee
