User Manual www.htc.
Please Read Before Proceeding THE BATTERY IS NOT CHARGED WHEN YOU TAKE IT OUT OF THE BOX. DO NOT REMOVE THE BATTERY PACK WHEN THE DEVICE IS CHARGING. YOUR WARRANTY IS INVALIDATED IF YOU OPEN OR TAMPER WITH THE DEVICE’S OUTER CASING. In regard to HSDPA/WCDMA,the phone just supports Band I (UMTS 2100) & Band VIII (UMTS 900) and doesn’t support band frequency for US.
Opera® Mobile from Opera Software ASA. Copyright 1995-2008 Opera Software ASA. All Rights Reserved. Google is a registered trademark and Google Maps is a trademark of Google, Inc. in the United States and other countries. YouTube is a trademark of Google, Inc. Sprite Backup is a trademark or service mark of Sprite Software. Copyright © 2008, Esmertec AG. All Rights Reserved. Copyright © 2003-2008, ArcSoft, Inc. and its licensors. All Rights Reserved.
Disclaimers THE WEATHER INFORMATION, DATA AND DOCUMENTATION ARE PROVIDED “AS IS” AND WITHOUT WARRANTY OR TECHNICAL SUPPORT OF ANY KIND FROM HTC.
Limitation of Damages TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL HTC OR ITS PROVIDERS BE LIABLE TO USER OR ANY THIRD PARTY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES OF ANY KIND, IN CONTRACT OR TORT, INCLUDING, BUT NOT LIMITED TO, INJURY, LOSS OF REVENUE, LOSS OF GOODWILL, LOSS OF BUSINESS OPPORTUNITY, LOSS OF DATA, AND/OR LOSS OF PROFITS ARISING OUT OF, OR RELATED TO, IN ANY MANNER, OR THE DELIVERY, PERFORMANCE OR NONPERFORMANCE OF OBLIGATIONS, OR
notebook computer has an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet which is properly installed and grounded in accordance with all local codes and ordinances. SAFETY PRECAUTIONS FOR POWER SUPPLY UNIT • Use the correct external power source A product should be operated only from the type of power source indicated on the electrical ratings label.
• Keep metal objects away so they don’t come in contact with the battery or its connectors as it may lead to short circuit during operation. • Do not use a battery that appears damaged, deformed, or discolored, or the one that has any rust on its casing, overheats, or emits a foul odor. • Always keep the battery out of the reach of babies and small children, to avoid swallowing of the battery. Consult the doctor immediately if the battery is swallowed.
NOTE: For France, Earphone (listed below) for this device have been tested to comply with the Sound Pressure Level requirement laid down in the applicable NF EN 503321:2000 and/or NF EN 50332-2:2003 standards as required by French Article L. 5232-1. • Earphone, manufactured by HTC, Model HS S200.
ROAD SAFETY Vehicle drivers in motion are not permitted to use telephony services with handheld devices, except in the case of emergency. In some countries, using handsfree devices as an alternative is allowed. SAFETY PRECAUTIONS FOR RF EXPOSURE • Avoid using your phone near metal structures (for example, the steel frame of a building). • Avoid using your phone near strong electromagnetic sources, such as microwave ovens, sound speakers, TV and radio.
NONIONIZING RADIATION Your device has an internal antenna. This product should be operated in its normaluse position to ensure the radiative performance and safety of the interference. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, it is recommended that no part of the human body be allowed to come too close to the antenna during operation of the equipment. Use only the supplied integral antenna.
General Precautions • Avoid applying excessive pressure to the device Do not apply excessive pressure on the screen and the device to prevent damaging them and remove the device from your pants’ pocket before sitting down. It is also recommended that you store the device in a protective case and only use the device stylus or your finger when interacting with the touch screen. Cracked display screens due to improper handling are not covered by the warranty.
• Avoid wet areas Never use the product in a wet location. • Avoid using your device after a dramatic change in temperature When you move your device between environments with very different temperature and/or humidity ranges, condensation may form on or within the device. To avoid damaging the device, allow sufficient time for the moisture to evaporate before using the device.
Contents Chapter 1 Getting Started 23 1.1 Getting to Know Your Touch Phone and Accessories...................................... 24 Top panel......................................................................................................................................24 Left panel......................................................................................................................................24 Right panel......................................................................
1.12 Adjusting the Volume...................................................................................... 46 1.13 When Connecting Your Device to a Computer............................................... 47 Chapter 2 Using Phone Features 49 Chapter 3 TouchFLO™ 63 2.1 The Phone Screen.............................................................................................. 50 Enter your PIN.......................................................................................................
Photos and Videos.....................................................................................................................72 Music..............................................................................................................................................73 Weather.........................................................................................................................................75 Maps Search (available by country).........................................
5.3 Setting Up ActiveSync® on Windows XP®....................................................... 100 Install ActiveSync.................................................................................................................... 100 Set up synchronization in ActiveSync............................................................................. 100 5.4 Synchronizing With Your Computer............................................................... 101 Start and stop synchronization................
Synchronize e-mails............................................................................................................... 126 Customize e-mail settings................................................................................................... 126 Chapter 7 Working With Company E-mails and Meeting Appointments 129 7.1 Synchronizing with the Exchange Server...................................................... 130 Set up an Exchange Server connection......................................
8.5 Using Streaming Media...................................................................................158 8.6 Using Windows Live™.......................................................................................160 Set up Windows Live™........................................................................................................... 160 The Windows Live™ interface............................................................................................. 161 Windows Live™ Messenger...
Chapter 11 Experiencing Multimedia 193 11.1 Taking Photos and Videos............................................................................. 194 Capture modes........................................................................................................................ 194 Capture photos and videos................................................................................................. 196 On-screen controls and indicators..........................................................
Chapter 12 Programs 12.1 12.2 12.3 12.4 225 Accessing Programs on Your Device............................................................. 226 Adding and Removing Programs................................................................. 226 Adobe® Reader® LE........................................................................................ 227 Calendar......................................................................................................... 228 Create appointments..................
21 Chapter 13 Managing Your Device 257 13.1 Copying and Managing Files........................................................................ 258 13.2 Settings on your Device................................................................................ 259 Personal tab.............................................................................................................................. 259 System tab...............................................................................................
Appendix 281 Index 291 A.1 Specifications................................................................................................... 282 A.2 Regulatory Notices..........................................................................................
Chapter 1 Getting Started 1.1 Getting to Know Your Touch Phone and Accessories 1.2 Installing the SIM Card, Battery, and Storage Card 1.3 Charging the battery 1.4 Using the Strap Holder 1.5 Starting Up 1.6 Navigating Your Device 1.7 Home Screen 1.8 Status Icons 1.9 Start Menu 1.10 Quick Menu 1.12 Adjusting the Volume 1.
Getting Started 1.1 Getting to Know Your Touch Phone and Accessories Top panel POWER Press to turn off the display temporarily. To turn off the power, press and hold for about 5 seconds. For more information, see “Starting Up” in this chapter. Left panel VOLUME UP During a call or when playing music, press here to increase the volume. VOLUME DOWN During a call or when playing music, press here to lower the volume. Right panel Stylus (See “Stylus” in this chapter for details.
Getting Started 25 Front panel Notification LED * See description below. Earpiece Listen to a phone call from here. TALK/SEND • Press to answer an incoming call or dial a number. • During a call, press and hold to toggle the speakerphone on and off. • Press and hold to use Voice Speed Dial. (See Chapter 12 for details.
Getting Started Back panel 3.2 Megapixel Camera See “Taking Photos and Videos” in Chapter 11 for details. Speaker Back Cover Strap Holder See “Using the Strap Holder” in this chapter for details. Bottom panel Sync Connector/Earphone Jack • Connect the supplied USB cable to synchronize information or plug in the power adapter to recharge the battery. • Connect the supplied USB stereo headset for hands-free conversation or for listening to audio media.
Getting Started 27 Accessories The product package includes the following items and accessories: • Battery • Power adapter • Screen protector • Stereo headset • USB sync cable • Quick Start Guide • Getting Started and Application discs
Getting Started 1.2 Installing the SIM Card, Battery, and Storage Card You need to remove the back cover before you can install the SIM card, battery and storage card on your device. Also, make sure to always turn off the power before installing or replacing the SIM card and battery. To remove the back cover 1. Make sure your device is turned off. 2. Hold the device securely with the front facing down. 3. With your thumb or finger, lift up the bottom of the back cover. To replace the back cover 1.
Getting Started 29 SIM card The SIM card contains your phone number, service details, and phonebook/ message memory. Your device supports both 1.8V and 3V SIM cards. Note Some legacy SIM cards may not function with your device. You should consult with your service provider for a replacement SIM card. There may be fees for this service. Cut-off corner To install the SIM card 1. Make sure your device is turned off. 2.
Getting Started Battery Your device comes with a rechargeable Lithium-ion battery and is designed to use only manufacturer-specified original batteries and accessories. Battery performance depends on many factors, including network configuration, signal strength, the features or settings used, the temperature of the environment and the way in which you operate your device, and more.
Getting Started 31 To install the battery 1. Align the battery’s exposed copper contacts with the battery connectors inside the battery compartment. 2. Insert the contacts side of the battery first and then gently push the battery into place. 3. Replace the back cover. To remove the battery 1. Make sure your device is turned off. 2. Remove the back cover. 3. Do one of the following to remove the battery: • Pull the ribbon strip upward to release the battery.
Getting Started Storage card To have additional storage for your images, videos, music, and files, you can purchase a microSD™ card and install it into the your device. To install a microSD card 1. Remove the back cover, 2. Insert the microSD card into the slot with its gold contacts facing down until it clicks into place. RESET Note To remove the microSD card, press it to eject it from the slot.
Getting Started 33 1.3 Charging the battery New batteries are shipped partially charged. Before you start using your device, it is recommended that you install and charge the battery. Some batteries perform best after several full charge/discharge cycles. To charge the battery 1. Connect the USB connector of the AC adapter to the sync connector on your device. 2. Plug in the AC adapter to an electrical outlet to start charging the battery.
Getting Started 1.4 Using the Strap Holder The strap holder at the bottom panel of your device allows you to attach a wrist strap, neck lanyard, or string accessory. To attach a strap, lanyard or string accessory to the strap holder 1. Remove the back cover. 2. Insert the loop of the strap, lanyard or string accessory through the small hole at the bottom of the back cover. 3.
Getting Started 35 1.5 Starting Up After installing your SIM card and battery and charging the battery, you can now power on and start using your device. Turn your device on and off To turn on the power 1. Press and hold the POWER button for a few seconds. 2. When you turn on your device for the first time, a Quick Start Wizard guides you to set up regional settings, date and time, and password. For more information about these settings, see Chapter 13.
Getting Started Note If you do not see the notification message, tap the title bar to display the System Status screen and then tap to display the message. 2. If your SIM card supports multiple network operator profiles, a message will appear with network profile choices. Select the profile you want to use and tap OK. 3. Connection Setup then starts to configure your device’s data connection settings. 4. After the Connection Setup completes the configuration, tap Restart.
Getting Started 37 Touch or tap When selecting items on the screen, such as the Home screen tabs, Start menu, programs and settings icons, and large on-screen buttons, simply touch them with your finger. Apply some pressure with your finger pad when touching an item on the screen. Tapping means to touch lightly and quickly with your finger pad or fingertip. On screens that display smaller-size items, you can more accurately select an item by tapping it with your fingertip.
Getting Started The following are some instances when you would use sliding: • Switching between Home screen tabs Slide your finger left and right to switch between the Home screen tabs. For more information, see “Using the TouchFLO Home screen“ in Chapter 3. • Advancing playback In Windows Media® Player Mobile, slide your finger horizontally on the progress bar to advance forward or move backward in the music or video you are playing.
Getting Started 39 Navigation Control On the home screen and in many programs on your device, you can use the Navigation Control to move through menus and instructions. Press the control up, down, left, and right to move around the screen. When an item has been selected on the screen, press the ENTER button (the center button) to confirm your selection. 1.
Getting Started 1.8 Status Icons When you touch or tap the icon area of the title bar, the System Status screen opens and displays larger status icons so you can touch them with your finger more easily and accurately. Tip The System Status screen can be disabled in TouchFLO settings. See “Settings on your Device” in Chapter 13 for details. The following are some of the status icons that you may see on the device.
Getting Started 41 Icon Description Connection Setup Multiple notifications; tap the icon to view all New text messages; SMS notification of voice mail Sending MMS Receiving MMS MMS sent Cannot send MMS New incoming MMS New Windows Live™ message Missed call Speakerphone on Roaming Alarm Other wireless network(s) detected Wired headset connected
Getting Started 2 Icon Description Icon Description GPRS available Connected to a wireless network EDGE available Connection is active HSDPA available WCDMA/UMTS available 3 Icon Description GPRS connecting GPRS in use EDGE connecting EDGE in use HSDPA connecting HSDPA in use WCDMA/UMTS connecting WCDMA/UMTS in use Maximum signal strength No signal Connection is not active Synchronization in progress
Getting Started 43 Icon Description Phone is turned off No phone service Searching for phone service Voice call in progress Call on hold Calls are forwarded Dialing while no SIM card is inserted No SIM card inserted 4 Icon Description Vibrate mode Sound on Sound off 5 Icon Description Battery charging Battery full Battery low
Getting Started 1.9 Start Menu The Start menu, which can be opened from the top left corner of the screen, gives you access to all the programs and settings of your Windows Mobile-powered device. Touch or tap to select an item on the Start menu. Open the Start menu. Open a recently-used program. When you are on another screen, touch or tap this item to return to the TouchFLO Home screen. Open a program. Access more programs. View and change settings. View Help information for the current screen.
Getting Started 45 1.10 Quick Menu The Quick menu, which can be opened from the top right corner of the screen, shows the currently running programs. You can quickly switch between running programs, stop programs, and see how much program memory is being used. Customize Task Manager settings. (See “Using Task Manager” in Chapter 13.) Stop all currently running programs. Touch this icon to open the Quick Menu. Shows the total percentage of program memory in use. Touch to open the Memory settings screen.
Getting Started 1.12 Adjusting the Volume Adjusting the system volume changes the volume level of sound notifications and audio/video playback, whereas adjusting the ring volume affects only the volume of the phone ring. The system volume and ring volume can be separately adjusted. 1. Touch the icon area in the title bar and then touch the Speaker icon ( the System Status screen. ) on 2. To switch between the Ring Volume and System Volume screens, touch Ring or System on top of the screen. 3.
Getting Started 47 1.13 When Connecting Your Device to a Computer Whenever you connect your device to the computer with the USB cable, the Connect to PC screen will be displayed and will prompt you to choose the type of USB connection: ActiveSync Select this mode when you need to do the following: • Synchronize Outlook e-mail messages, contacts, calendar appointments, files, and other data between your device and your computer. • Have read and write access to the whole device.
Getting Started When Disk Drive mode is enabled while your device is connected to the computer: • You will not be able to use your device to access files from the storage card or run applications that are installed on the storage card while the device is connected to your computer. • Your computer will only connect to the device’s storage card. When you access your device from the computer, you will only see the contents of the device’s storage card.
Chapter 2 Using Phone Features 2.1 The Phone Screen 2.2 Making Calls 2.3 Answering and Ending Calls 2.4 Call History 2.5 Speed Dial 2.6 Turning the Phone Function On and Off 2.
Using Phone Features 2.1 The Phone Screen Like a standard mobile phone, you can use your device to make, receive, and keep track of calls and send text messages. To open the Phone screen, do one of the following: • On the Home screen, tap Phone. • Press the TALK/SEND ����������������� button. TALK/SEND button Enter your PIN Most SIM cards are preset with a PIN (personal identification number) that is provided by your wireless service provider. 1.
Using Phone Features 51 2.2 Making Calls To make a call, you can either dial a number or select a contact you want to call. Make a call from the Phone screen The Phone’s Smart Dial feature makes it quick and easy for you to place a call. When you start entering a phone number or contact name, Smart Dial automatically searches and sorts the contact entries on the SIM card, in Contacts, and the phone numbers in Call History (including incoming, outgoing, and missed calls).
Using Phone Features 3. Tap to close the phone keypad and to see if there are more matching numbers or contacts in the Smart Dial panel. To browse through the filtered list, flick through the list, slide your finger up or down the list slowly, or press NAVIGATION up/down to. Smart Dial panel 4. To call a number or contact, do one of the following: • Tap the desired phone number or contact from the list.
Using Phone Features 53 Make a call from Contacts On the Home screen, tap Start > Contacts to open the Contacts screen. Do one of the following: • Select the contact to call and then press TALK/SEND. Note If the contact has more than one number stored, press NAVIGATION right/left to select the number you want to call before pressing TALK/SEND. • Tap the contact to open the contact details and then tap the phone number you want to call.
Using Phone Features Make an international call 1. Tap and hold the number 0 key on the Phone screen until the plus (+) sign appears. The plus (+) sign replaces the international prefix of the country that you are calling. 2. Enter the full phone number you want to dial, and press the TALK/SEND button on your device. The full phone number includes the country code, area code (without the leading zero, if any), and phone number. Call voice mail Number 1 is generally reserved for your voice mail.
Using Phone Features 55 Accept or reject an incoming call To answer a call Do one of the following: • Press the TALK/SEND button. • Touch and hold the button that’s at the middle of the Answer and Ignore options, and then drag the button to the leftmost side. To reject an incoming call Do one of the following: • Press the END button. • Touch and hold the button that’s at the middle of the Answer and Ignore options, and then drag the button to the rightmost side.
Using Phone Features Call functions When a call is in progress, tap the available buttons on the Phone screen to put a call on hold, dial another contact for a phone conference, enter notes about the conversation, and more. These are the call functions. Note When the Phone is dialing, only the Speaker, Mute, Note, Contacts, and End Call buttons can be used. Other buttons are disabled.
Using Phone Features 57 To set up a conference call 1. Either put a call on hold, and dial a second number; or, accept a second incoming call when you already have one in progress. Tip 2. Tap Note To dial a second number, tap on the screen. . Not all mobile phone networks support conference calling. Contact your wireless service provider for details. To turn on and off the Speakerphone During a call, tap to toggle between turning on or off the speakerphone.
Using Phone Features To add a new phone number to Contacts after a call If the phone number of the person who called is not in Contacts, you can choose to save the number after you hang up. 1. On the Phone screen, tap Menu > Options > Advanced tab. 2. Select the Add new phone number to Contacts at end of call check box, then tap OK. When you enable this option, a pop-up message appears after you end the phone call and lets you add the phone number to Contacts.
Using Phone Features 59 2.4 Call History Use Call History to check for missed calls, dialed numbers, and calls received. To open the Call History screen, tap Menu > Call History on the Phone screen. If you have a long list of calls in the Call History, tap one of the buttons at the bottom of the screen to filter the list according to the type of call. All Calls Received Missed Dialed 2.5 Speed Dial Use Speed Dial to call frequently-used numbers with a single tap.
Using Phone Features 4. In Location, select an available key to use as the speed dial key. 5. Tap OK. Tips • To create a Speed Dial entry from Contacts or SIM card contacts, tap the contact, select the number you want to add to Speed Dial, then tap Menu > Add to Speed Dial. • To delete a Speed Dial entry, in the Speed Dial list, tap and hold the desired entry, then tap Delete. 2.
Using Phone Features 61 2.7 Setting Up Bluetooth SIM Access for Car Kit Phones Bluetooth car kits that support the SIM Access Profile (SAP) can connect to your device and access its SIM card via Bluetooth. Once a SAP connection has been established, you can download SIM contacts from your device to the car kit phone. You can also use the car kit phone to answer and make calls using your device’s SIM card.
Using Phone Features
Chapter 3 TouchFLO™ 3.1 About TouchFLO™ 3.2 Using the TouchFLO Home Screen 3.
TouchFLO™ 3.1 About TouchFLO™ TouchFLO™ gives you touch control over your Windows Mobile-powered device. TouchFLO provides the following features: • A Home screen that allows finger-touch access to the most widely-used functions, such as People, Messages, Mail, Music, Internet, and more • Finger gestures that allow you to navigate screens 3.
TouchFLO™ 65 To switch between the tabs of the Home screen Do one of the following: • Touch or tap the desired tab on the Home screen. • Press Navigation Right or Left to move to the next or previous tab. • Press and hold your finger on the active tab, then slide your finger right or left over the tabs. Release when you have selected the desired tab. Note Apply some pressure when pressing and holding on the active tab to be able to slide over the tabs.
TouchFLO™ Home The Home tab displays the current date, an analog and digital clock, and a yellow alarm hand that indicates whether the alarm is on or off. Missed calls and your upcoming calendar appointment are also shown on the Home tab. To select an item on the Home tab • Touch the item; or • Press Navigation Up or Down first to navigate to the item you want to select and then press ENTER. Touch this area to open the Clock & Alarms screen where you can set the date, time, and alarm.
TouchFLO™ 67 People On the People tab, you can add favorite contacts who you most frequently communicate with. This allows you to quickly make calls, send text messages, and send e-mails to your favorite contacts. Tip You can add up to 12 favorite contacts on the People tab. To add a favorite contact 1. On the Home screen, slide your finger to the People tab. 2. Touch an empty slot on the screen. 3. On the Select a Contact screen, touch the name of the desired contact.
TouchFLO™ The following icons will appear below the pictures to indicate the type of contact information that is associated to each favorite contact: Mobile phone Home phone Work phone E-mail SMS text messaging To choose from your favorite contacts • Swipe your finger up to scroll down the favorite contacts on the screen, or swipe your finger down to scroll up. • Touch the area below the contact picture to place a call, send a text message, or send an e-mail to the favorite contact.
TouchFLO™ 69 Messages On the Messages tab, you can read SMS text messages as they arrive and create a new SMS text message. You can also view the text of received MMS messages on this tab. When there are new incoming SMS/MMS messages, the icon on the Messages tab will show the number of new messages. For example, indicates that there is a new message received. Touch this icon to create a new SMS text message. To view the entire message thread from the sender and reply, touch the message on the screen.
TouchFLO™ Mail The Mail tab is where you send and receive e-mail messages. Including Outlook E-mail, you can add up to seven POP3/IMAP4 and web-based e-mail accounts in this tab. To add an e-mail account 1. On the Home screen, slide your finger to the Mail tab. 2. If this is your first time to add an e-mail account, touch New Account at the bottom-left side of the screen. 3. Set up your e-mail account using the E-mail Setup wizard. 4.
TouchFLO™ 71 Tips • On the Mail tab, touch Inbox at the lower-left side of the screen to access all e-mail messages of the currently selected account. • To manually download e-mail messages for the currently selected account, touch Menu > Send/Receive. For more information about working with e-mail messages, see Chapter 6 and 7. Internet On the Internet tab, you can open Opera Mobile™ to browse the web and add web favorites for one-touch access to your favorite web sites.
TouchFLO™ Photos and Videos The Photos and Videos tab lets you visually flip through your photos and video clips and view them in full screen. From this tab, you can also activate the Camera so you can take pictures and record video clips. The Photos and Videos tab displays pictures and video files from the current favorite album. By default, the Camera Shots album which stores the pictures and videos that you captured using the device camera is set as the favorite.
TouchFLO™ 73 Tips • For more information about viewing in full screen, see “View an image” and “Play back video” in Chapter 11. The file formats that can be viewed on the Photos and Videos tab are the same as the Album program. • To transfer media files from a computer and view them on the Photos and Videos tab, copy or synchronize them to a folder under \My Device (the device memory) or \Storage Card (if a microSD card is installed).
TouchFLO™ To set repeat and shuffle modes Touch Menu > Repeat to loop the songs. To toggle shuffle mode on and off, touch Menu > Shuffle. The icons on the upper-right side of the Music tab show whether repeat and shuffle modes are enabled. Repeat [On] Shuffle [On] To select music from the Library Accessing the Library from the Music tab opens the Audio Manager since the Music tab shares the same Library as the Audio Manager.
TouchFLO™ 75 Weather The Weather tab shows you the current weather as well as weather information for the next four days of the week. To add a city The Weather tab can display weather information of your local city and other added cities. Follow the steps below to add a city on this tab. Tip You can add up to 10 cities on the Weather tab. 1. On the Weather tab, tap Menu > Add Location. The Select City screen then appears. 2.
TouchFLO™ To customize weather settings 1. On the Weather tab, touch Menu > Settings. 2. You can choose from the following options: • Download weather automatically. When this option is selected, weather information is automatically downloaded from the AccuWeather web site whenever you select the Weather tab, if the data has not been updated within the last three hours. Weather data is also downloaded every time an ActiveSync connection is established (through over-the-air or USB connections).
TouchFLO™ 77 Maps Search (available by country) The Maps Search tab uses Google Maps to search for locations and display maps. On this tab, you can type in and search for a street address or places of interest such as restaurants, hotels, and more, near your current location. To search for a location Enter the street address or a place of interest (such as hotel, restaurant, or others) in the search bar. Tip Tap this icon to perform the search.
TouchFLO™ Settings The Settings tab allows you to synchronize information with your computer or the Exchange Server, select a phone profile and other sound settings, and choose a different wallpaper for the Home tab. You can also easily turn on and off the communications features of your device such as Wi-Fi, Bluetooth, and more. To select a phone profile A profile is a preset that determines how your device will alert you when there are incoming phone calls.
TouchFLO™ 79 To set sounds or notifications for events To personalize your device with unique sounds or notifications for different events such as missed calls, new SMS, and more, touch Sounds on the Settings tab and then touch Advanced. For more information about setting sounds and notifications, see “To choose how to be notified about events or actions” in Chapter 13. To change the background image You can change the background image of the Home tab by following these steps: 1.
TouchFLO™ Programs The Programs tab allows you to add your favorite programs for one-touch access. Touch a program icon to open the corresponding program. Touch an empty slot to add a favorite program. Touch All Programs to access all the programs of your device. Touch Remove to choose which program to remove from the Programs tab. When you have filled up the screen with programs, scroll down the Programs tab to access more empty slots and add more programs.
TouchFLO™ 81 3.3 Finger Gestures You can use finger gestures to scroll, zoom and pan on the touch screen. Finger scrolling Finger scrolling can be used to scroll up and down web pages, documents, and lists such as the contacts list, file list, message list, calendar appointments list, and more. When finger scrolling, swipe or flick your finger on the touch screen. To scroll up and down • To scroll down, swipe your finger upward on the touch screen.
TouchFLO™ Finger zooming The type of finger gesture to use when zooming varies in different programs. • To zoom in on a web page in Opera Mobile, tap your finger twice on the screen. See “Using Opera Mobile” in Chapter 8 for details. • To zoom in on a photo in Album, make a full-circle swipe on the touch screen. See “Viewing Photos and Videos Using Album” in Chapter 11 for details.
Chapter 4 Entering Text 4.1 Selecting an Input Method 4.2 Using the Full QWERTY 4.3 Using the Compact QWERTY 4.4 Using the Phone Keypad 4.5 Using Multitap and T9 Modes 4.6 Using Numeric and Symbol Mode 4.7 Using Block Recognizer 4.8 Using Letter Recognizer 4.
Entering Text 4.1 Selecting an Input Method When you start a program or select a field that requires text or numbers, the Input Panel icon becomes available on the menu bar. Tap the Input Selector arrow (that appears next to the Input Panel icon) to open a menu where you can select a text input method and customize input options. After selecting a text input method, the corresponding Input Panel is displayed, which you can use to enter text. Tip Select Other Input Methods to display more input methods.
Entering Text 85 4.2 Using the Full QWERTY The Full QWERTY is a full on-screen QWERTY keyboard layout similar to a desktop PC keyboard. Tip You can also use the Windows Mobile on-screen keyboard which also has a QWERTY keyboard layout by selecting Keyboard (or Other Input Methods > Keyboard) on the Text input method menu. • Tap to enter letters or symbols. • Tap and hold to enter a punctuation mark, symbol, or number that appears on top of a key. • Tap to enter an uppercase letter.
Entering Text 4.3 Using the Compact QWERTY The Compact QWERTY is a type of on-screen keyboard which features 20 keys. With its large, touch-friendly keys and enhanced features such as T9 predictive input, you can enter text faster and more accurately. • Tap to enter letters or symbols. • Tap and hold to enter a punctuation mark, symbol, or number that appears on top of a key Displays the word candidate list in T9 mode. Tap a word to insert it into your text. Tap to add a word to the T9 dictionary.
Entering Text 87 4.4 Using the Phone Keypad The Phone Keypad is a 12-key on-screen keypad that has a layout similar to mobile phone keypads, plus some additional keys. The Phone Keypad has large keys and enhanced input features such as T9 predictive input, which makes it faster for you to enter text in your messages and documents. Displays the word candidate list in T9 mode. Tap a word to insert it into your text. Tap to add a word to the T9 dictionary. • Tap to enter letters or symbols.
Entering Text 4.5 Using Multitap and T9 Modes When using the on-screen keyboards, you can choose to enter text using Multitap or T9 mode. Multitap mode In Multitap mode (for Compact QWERTY and Phone Keypad), enter a character by tapping a key until the desired character is displayed on the screen. • To enter the first letter that shows on a key, tap the key once. To enter the second letter, tap twice.
Entering Text 89 Tap to not add the word. To customize Touch Input settings 1. Tap the Input Selector arrow, then tap Touch Input Settings. 2. On the Touch Input Settings screen, select or clear the following options according to your preferences: • Spell Correction. Lets you correct typographical errors by selecting from a list of possible words that reflect the characters of the keys you have tapped as well as characters of nearby keys. • Word Completion in T9 mode.
Entering Text 4.6 Using Numeric and Symbol Mode Switch to Numeric and Symbol mode to let you easily enter numbers and common symbols such as parentheses, braces, currency signs, punctuation marks, special characters, and more. Numeric and Symbol mode is available when using the Full QWERTY, Compact QWERTY, and Phone Keypad. Tap a number or symbol to insert it into your text. Tap to go to the previous or next page of symbols. See “To lock the keyboard in Numeric and Symbol mode.
Entering Text 91 Tip In Compact QWERTY and Phone Keypad, tap / to toggle between locking the keyboard in Numeric and Symbol mode and switching back to the letter keyboard layout after tapping a symbol or number. 4.7 Using Block Recognizer With Block Recognizer, you use a single stroke to write letters, numbers, symbols, and punctuation, which are then converted into typed text. To use Block Recognizer 1. From a program, tap the Input Selector arrow and then tap Other Input Methods > Block Recognizer. 2.
Entering Text 4.8 Using Letter Recognizer With Letter Recognizer, you can write individual letters, numbers, and punctuation marks, which are then converted into typed text. To use Letter Recognizer 1. From a program, tap the Input Selector arrow and then tap Other Input Methods > Letter Recognizer. 2. Write characters, numbers, and symbols in the designated writing area. • Enter uppercase letters by writing in the ABC (left) area of the box.
Entering Text 93 To enter punctuation and symbols Transcriber comes with an on-screen keyboard that provides an easy way to add punctuation or a special symbol to existing text. To use this on-screen keyboard, tap on the Transcriber toolbar. The keyboard remains visible until you tap the button again. Tips • To reposition the keyboard, tap and hold the title bar, then drag to the desired location.
Entering Text
Chapter 5 Synchronizing Information With Your Computer 5.1 About Synchronization 5.2 Setting Up Windows Mobile® Device Center on Windows Vista® 5.3 Setting Up ActiveSync® on Windows XP® 5.4 Synchronizing With Your Computer 5.5 Synchronizing via Bluetooth 5.
Synchronizing Information With Your Computer 5.1 About Synchronization You can take information from your computer wherever you go by synchronizing them to your device.
Synchronizing Information With Your Computer 97 Bluetooth. For more information about setting up a Bluetooth partnership, see Chapter 9. For information about synchronizing through Bluetooth, see “Synchronizing via Bluetooth” later in this chapter. Try to synchronize regularly in order to keep information up-to-date in both your device and your computer. Notes • You can also synchronize Outlook e-mail, contacts, calendar, and tasks on your device with the Exchange Server at your work.
Synchronizing Information With Your Computer 3. On the Windows Mobile Device Center’s Home screen, click Set up your device. Note Choose Connect without setting up your device if you only want to transfer media files, check for updates, and explore your device but not synchronize Outlook information. 4. Select the items you want to synchronize, then click Next. 5. Enter a device name, then click Set Up.
Synchronizing Information With Your Computer 99 Use Windows Mobile Device Center To open Windows Mobile Device Center, click Start > All Programs > Windows Mobile Device Center on your Windows Vista computer. On Windows Mobile Device Center, you can do the following: • Click Mobile Device Settings to change synchronization settings.
Synchronizing Information With Your Computer 5.3 Setting Up ActiveSync® on Windows XP® The Getting Started disc that comes with your device contains Microsoft ActiveSync 4.5 or later. Follow the steps in this section to install and set up ActiveSync on Windows XP or other compatible Windows systems. Note For a list of compatible Windows systems, go to http://www.microsoft.com/windowsmobile/activesync/activesync45.mspx. Install ActiveSync 1.
Synchronizing Information With Your Computer 101 When you finish the wizard, ActiveSync synchronizes your device automatically. Notice that Outlook e-mails and other information appear on your device after synchronization. 5.4 Synchronizing With Your Computer Connect and synchronize your device with your computer using the USB cable or Bluetooth connection. Start and stop synchronization You can manually synchronize either from your device or computer.
Synchronizing Information With Your Computer Change which information is synchronized You can change the information types and the amount of information to synchronize for each type either on your device or your computer. Follow the steps below to change synchronization settings on your device. Note Before changing synchronization settings on your device, disconnect it from your computer. 1. In ActiveSync on your device, tap Menu > Options. 2.
Synchronizing Information With Your Computer 103 Troubleshoot sync connection problem In some cases, when the computer connects to the Internet or a local network, it may disconnect the connection with your device in favor of the Internet or network connection. If this happens, tap Start > Settings > Connections tab > USB to PC, then clear the Enable advanced network functionality check box. This makes your computer utilize a serial USB connection with your device. 5.
Synchronizing Information With Your Computer 5.6 Synchronizing Music and Video If you want to carry your music or other digital media along with you while you travel, set up Windows Media® Player on your computer to synchronize music and video with your device. Other than selecting the Media information type to be synchronized, all media synchronization settings must be set in Windows Media® Player.
Chapter 6 Exchanging Messages 6.1 Messaging 6.2 Text Messages 6.3 MMS 6.4 Types of E-mail Accounts 6.5 E-mail Setup Wizard 6.
Exchanging Messages 6.1 Messaging Messaging is a central location where you will find all types of messaging accounts, which include text messages (SMS), multimedia messages (MMS), and e-mail accounts. To select a messaging account Do one of the following: • On the TouchFLO Home screen, slide to the Mail tab and then touch Menu > Accounts > Accounts. The Account Picker screen then opens where you can select an account. Tip • You can also tap Start > Messaging to access the Account Picker screen.
Exchanging Messages 107 4. Select the Use signature with this account check box. 5. In the provided text box, enter the information that will be displayed as your signature. 6. If you want the signature to be added whenever you reply or forward messages, select the Use when replying and forwarding check box, then tap OK. 7. Repeat the steps to add a signature to other messaging accounts. 6.2 Text Messages Send short text messages (SMS) up to 160 characters long to other mobile phones.
Exchanging Messages From the Contacts screen 1. Tap Start > Contacts. 2. Tap the contact’s name to open his or her contact card. 3. Touch Send text message. Compose and send a text message After creating a new text message, follow the steps below to enter your message and then send it. 1. To add recipients, enter their mobile phone numbers in the To field, separating them with a semicolon. You can also tap To or tap Menu > Add Recipient to add mobile phone numbers from Contacts�. 2.
Exchanging Messages 109 To reply to a text message 1. In the SMS \ MMS inbox, tap a message thread to open it. 2. At the bottom of the screen, type your reply message and then tap Send. Enter your reply message here To copy a message in the thread to the SIM card 1. In the SMS \ MMS inbox, tap the message to open it. 2. Use the Navigation Up or Down control to select a message in the thread that you want to copy to the SIM card. Note You cannot copy a sent message from the thread to the SIM card. 3.
Exchanging Messages To copy a text message from the SIM card to the device 1. In the SMS \ MMS inbox, select the SIM message you want to copy. 2. Tap Menu > Copy to Phone. Note Copying SIM text messages to your device results in duplicate messages in the Inbox folder when your SIM card is in use. To delete a message in the thread 1. In the SMS \ MMS inbox, tap a message thread to open it. 2. Use the Navigation Up or Down control to select a message in the thread that you want to delete. 3.
Exchanging Messages 111 6.3 MMS Sending multimedia messages (MMS) to your friends and family is fun and easy. You can include pictures, videos, and audio clips in a multimedia message. Notes • Multimedia messaging is a charged service and has to be provisioned on your mobile phone account. Contact your wireless service provider to have MMS provisioned as part of your calling plan. • Make sure the size of MMS messages that you send is within the limits allowed by your wireless service provider.
Exchanging Messages • Gateway. Location of the MMS server, which is usually in the form of an IP address. • Port number. HTTP port number used for connecting to the MMS server and for file transfer. • Server address. URL address of the server where MMS messages are stored. • Connect via. Select the connection that your device uses for MMS messages. • Send limit. Select the maximum MMS message size allowed by your wireless service provider. • WAP version. Select either WAP 1.2 or WAP 2.
Exchanging Messages 113 3. In To, enter the recipient’s phone number or e-mail address directly, or tap To, Cc, or Bcc to choose a phone number or an e-mail address from Contacts. Note You may need to scroll up to see Cc and Bcc. 4. Enter a subject for your message. 5. Tap the Insert icon ( )to select and insert a photo or video clip. When selecting a photo or video clip, you can: • Tap Select to insert the selected photo or video clip into the MMS message you are composing.
Exchanging Messages To add text to an MMS message When you tap Insert text here on your MMS message, an empty screen appears where you can enter your text. You can insert the following types of information: Enter your own text Choose from common words or phrases from the My Text list Include a Favorites link Add an emoticon Tip Insert contact information Insert calendar appointment To edit or delete a phrase on the My Text list, tap and hold a string, then tap Edit or Delete from the shortcut menu.
Exchanging Messages 115 Note To record a new audio clip and add it to your MMS message, tap . The Record popup window then opens. Tap Record to start recording, and Stop to end the recording. Tap Play to listen to the recorded audio clip, then tap Add. The new audio clip is then inserted into your MMS message. View and reply to MMS messages To view an MMS message • Use the playback controls • , , and . Tap Contents to see a list of files included in the message.
Exchanging Messages To block a phone number from sending you MMS messages If you do not want to receive MMS messages from a particular sender, you can add the sender’s phone number to the MMS Blacklist. 1. When you receive a new MMS message, open and view the message. 2. To avoid receiving MMS messages from this sender next time, tap Menu > Show > Message Detail. 3. On the Message Detail screen, tap Menu > Show Contact Details. 4. Tap Menu > Save to Blacklist. 5. Tap Done.
Exchanging Messages 117 Set up your device to synchronize Outlook e-mail with the computer If you have installed the synchronization software on your computer and created a partnership with your device, then your device is ready to send and receive Outlook e-mail. If you have not yet installed the synchronization software nor created a partnership, do so by following the procedures in Chapter 5.
Exchanging Messages 6.5 E-mail Setup Wizard Windows Mobile’s E-mail Setup wizard walks you through the process of setting up your e-mail account. It has an Auto Setup feature which can automatically set up your e-mail account based on the e-mail address and password that you enter, if your e-mail provider settings are preconfigured on your device.
Exchanging Messages 119 4. Enter Your name and the Account display name and then tap Next. Note If the E-mail Setup wizard was unsuccessful in finding and downloading settings from the Internet, select Internet e-mail from the Your e-mail provider list on the next screen. You will be asked to enter e-mail server settings. See “To specify e-mail server settings” for details. 5.
Exchanging Messages To customize download and format settings Before you tap Finish when setting up your POP3 or IMAP4 e-mail account, you can tap the Review all download settings link at the bottom of the screen to choose download options, message format, and other settings.
Exchanging Messages 121 Set up a custom domain e-mail When you are using an e-mail domain name that is hosted by a different e-mail provider (for example, your e-mail address may be Benjamin@startup.com but Email.com hosts the e-mail account and provides e-mail services), select the Custom Domain option in the E-mail Setup wizard to set up your e-mail account on your device. 1. Add a new e-mail account. See “Add an e-mail account” for instructions. 2.
Exchanging Messages 6.6 Using E-mail After setting up e-mail accounts on your device, you can start sending and receiving e-mail messages. Create a new e-mail message Depending on your preference, there are two ways you can create a new e-mail message. To start from an empty message 1. On the TouchFLO Home screen, slide to the Mail tab. 2. Select the e-mail account you want to use on the right side of the screen. 3. Touch the New Mail icon ( ) to create a new e-mail.
Exchanging Messages 123 Compose and send an e-mail After creating a new e-mail, follow the steps below to enter your message and then send it. 1. To add recipients, enter their e-mail addresses, separating them with a semicolon. You can also tap To if you want to add e-mail addresses stored in Contacts. 2. Enter a subject and compose your message. Tip To choose from preset messages, tap Menu > My Text and tap a desired message. To check the spelling, tap Menu > Spell Check. 3. Tap Send.
Exchanging Messages For example, entering “B”, then “E” narrows the list to only the e-mails that contain sender names and e-mail subjects that start with “BE.” View and reply to messages To download a complete e-mail By default, each e-mail received in the inbox on your device contains only the first few kilobytes of the message. When you open an e-mail, it displays only the headers and part of the message. You must download the whole e-mail to view the complete content.
Exchanging Messages 125 Fetch Mail is also available for Outlook E-mail. See “Instant download through Fetch Mail” in Chapter 7 for details. • Download may take some time, depending on the speed of your Internet connection, size of the whole e-mail, and whether file attachments are automatically downloaded. To download file attachments • POP3 e-mail account: File attachments of a POP3 Internet e-mail account are automatically downloaded when you download a complete e-mail.
Exchanging Messages Synchronize e-mails Synchronizing e-mails ensures that new e-mails are downloaded to the device Inbox folder, e-mails in the Outbox folder are sent, and e-mails deleted from the server are removed from your device. The manner in which you synchronize e-mails depends on the type of e-mail account you have. To automatically synchronize an Outlook e-mail account 1. Connect your device to your computer through USB or Bluetooth.
Exchanging Messages 127 To change the download size and format for Internet e-mail 1. Tap Menu > Options on the Account Picker screen, or tap Menu > Tools > Options while you’re in a message list. 2. Tap your POP3 or IMAP4 Internet e-mail account. 3. Tap Download Size Settings. 4. Under Message format, select HTML or Plain Text. 5. Under Download size limit, select the desired e-mail size. 6. Tap Done. To automatically receive attachments on Outlook e-mails 1. Tap Start > Programs > ActiveSync. 2.
Exchanging Messages
Chapter 7 Working With Company E-mails and Meeting Appointments 7.1 Synchronizing with the Exchange Server 7.2 Working With Company E-mails 7.3 Managing Meeting Requests 7.
Working With Company E-mails and Meeting Appointments 7.1 Synchronizing with the Exchange Server To keep up-to-date with your company e-mails and meeting schedules while you’re out of the office, you can connect your device to the Internet through Wi-Fi or a data connection and synchronize with your company’s Exchange Server. Set up an Exchange Server connection Before you can synchronize or access information on the Exchange Server, you need to set up an Exchange Server connection on your device.
Working With Company E-mails and Meeting Appointments 131 9. Select the items that you want to sync with the Exchange Server. Tips • To change synchronization settings of an information item, for example, E-mail, select the item, then tap Settings. • To change the rules for resolving synchronization conflicts, tap Menu > Advanced. 10. Tap Finish.
Working With Company E-mails and Meeting Appointments 7.2 Working With Company E-mails Your device gives you instant access to your company e-mails and lets you manage your messages easier. Direct Push, Fetch Mail, Remote e-mail search, and e-mail flags are just some of the tools you can use to manage your e-mails. Note Some messaging features depend on the Microsoft Exchange Server version used in your company. Check with your network administrator for the availability of these features.
Working With Company E-mails and Meeting Appointments 133 To turn on Direct Push in ActiveSync 1. Tap Start > Programs > ActiveSync and then tap Menu > Schedule. 2. Select As items arrive in the Peak times and Off-peak times boxes. Note When Direct Push is off, you need to manually retrieve your e-mails. Scheduled synchronization If you do not want to use Direct Push, you can set a regular schedule for synchronizing Outlook e-mail and information. 1. In ActiveSync on your device, tap Menu > Schedule. 2.
Working With Company E-mails and Meeting Appointments 3. By default, only the first few words of the message is shown. To download the whole e-mail, finger-scroll to the end of the message, then tap Get the rest of this message. 4. Wait for the remainder of the message body to download. Notes • For information about changing e-mail sync options such as setting the download size for e-mail, see "Customize e-mail settings" in Chapter 6.
Working With Company E-mails and Meeting Appointments 135 Flag your messages Flags serve as a reminder for you to follow-up on important issues or requests contained in e-mail messages. Flagging messages, which has been a useful feature on desktop Outlook E-mail, can also be done in Outlook Mobile on your device. You can flag received e-mail messages on your device. Requirement Flags are enabled only if e-mails are synchronized with Microsoft Exchange Server 2007 or higher.
Working With Company E-mails and Meeting Appointments Out-of-office auto-reply Outlook Mobile allows you to retrieve and change your out-of-office status. Just like desktop Outlook E-mail, Outlook Mobile automatically sends an autoreply message when you’re not available. To send out-of-office auto-reply messages 1. Tap Start > Messaging > Outlook E-mail. 2. Tap Menu > Tools > Out of Office. 3. In the I am currently list, select Out of the Office. 4. Enter your auto-reply message, then tap Done. 7.
Working With Company E-mails and Meeting Appointments 137 • If the time of the meeting conflicts with your other appointments, a “Scheduling Conflict” status appears on top of the e-mail. 3. Choose whether or not to edit your response e-mail before sending, then tap OK. If you accepted the meeting request, it will automatically be added as an appointment in Calendar on your device. To view the list of meeting participants 1. Tap Start > Calendar. 2.
Working With Company E-mails and Meeting Appointments • To view an attendee’s contact information, tap the attendee’s name. If the attendee is included in your contacts list, you will see the contact information immediately. If the attendee is not in your contacts list, tap Company Directory to view the contact information. 7.4 Finding Contacts in the Company Directory In addition to having contacts on your device, you can access contact information from your organization’s Company Directory.
Working With Company E-mails and Meeting Appointments 139 • When creating a meeting request and selecting required and optional attendees in Calendar, tap Company Directory. 3. Enter a partial or full contact name and tap Search. In the search results list, tap a contact to select it. Notes • You can save a contact from the Company Directory to your device by selecting the contact, then tapping Menu > Save to Contacts.
Working With Company E-mails and Meeting Appointments
Chapter 8 Internet 8.1 Ways of Connecting to the Internet 8.2 Starting a Data Connection 8.3 Using Opera Mobile™ 8.4 Using YouTube™ 8.5 Using Streaming Media 8.6 Using Windows Live™ 8.7 Using Your Device as a Modem (Internet Sharing) 8.
Internet 8.1 Ways of Connecting to the Internet Your device’s networking capabilities allow you to access the Internet or your corporate network at work through one of the following connections: • Wi-Fi • 3G, GPRS, or EDGE • Dial-up Note You can also add and set up the following connections: • VPN: A VPN connection is used to access your corporate network by using an existing Internet connection.
Internet 143 1. The network names of the detected wireless networks are displayed on a pop-up message window. Tap the desired wireless network, then tap OK. Note When you select an open (unsecured) network, you will be automatically connected to the network after tapping OK. You do not need to do steps 2 and 3. 2. On the next pop-up message window, do one of the following: • Tap The Internet if the wireless network connects your device to the Internet.
Internet To check wireless network status You can check the current wireless connection status from any of the following screens of your device: • Title bar. When you enable Wi-Fi on your device, the Wi-Fi ON icon title bar. appears on the After Wi-Fi is turned on, your device scans for available wireless networks and the wireless signal icon appears on the title bar. The arrows in this icon move back and forth while your device is scanning for a wireless network signal.
Internet 145 • Configure Wireless Networks screen. On the Home screen, slide to the Settings tab and then tap All Settings. In the Connections tab, tap Wi-Fi. This screen displays the wireless networks currently available. To connect to a wireless network in the list, tap and hold on the desired network, then tap Connect. Tap a wireless network in the list to view or change its connection settings. You can also add new wireless networks, if available, by tapping Add New.
Internet GPRS/3G Use GPRS/3G (or EDGE, if available) to connect to the Internet and to send and receive e-mail and picture messages on your device. You will need a data plan to use your wireless service provider’s GPRS/3G network. Check with your wireless service provider to find out about GPRS/3G rates.
Internet 147 4. On the Make New Connection screen, enter a name for the connection. 5. In the Select a modem list, select Cellular Line (GPRS , 3G), then tap Next. 6. Enter the Access point name, then tap Next. 7. Enter the user name and password, if required, then tap Finish. Notes • To view help information for any screen, tap the help icon ( ). • To modify your connection settings, tap Manage existing connections and then tap Edit.
Internet 5. Enter the ISP server phone number, then tap Next. 6. Enter your user name, password, and any other information required by your ISP, then tap Finish. 8.2 Starting a Data Connection After setting up a data connection such as GPRS/3G or ISP dial-up on your device, you can now connect your device to the Internet. The connection is started automatically when you begin using a program that accesses the Internet such as Opera Mobile. To manually connect or disconnect a data connection 1.
Internet 149 8.3 Using Opera Mobile™ Opera Mobile™ is a full-featured Internet browser, optimized for use on your device. Note You can also use Internet Explorer® Mobile to browse the web. To open Internet Explorer Mobile, tap Start > Internet Explorer. 1 8 2 3 4 5 6 7 9 10 1 Refresh. Tap to reload the web page being viewed. 2 Address bar. Enter the URL of the web site here. 3 Back. Tap to go back to the previous web page viewed. 4 Bookmarks.
Internet 7 Menu. Tap to open a list where you can change Opera Mobile settings, check downloads, view History, and more. 8 Close tab. Tap to close the current tab. This is only enabled if you have more than one tab opened. 9 Zoom. Tap to open the Zoom bar. See “Zoom in on web pages” for more details. 10 Exit Full Screen mode. When browsing the web, Opera Mobile automatically switches to Full screen mode. Tap to show the address and Menu bars again.
Internet 151 View web pages While browsing web pages, use finger gestures to pan and zoom on the web page. Tip Touch and hold an empty area on a web page to open a shortcut menu that lets you go back to the previous page, reload the page, add the page as a Favorite, and more. You can also tap and hold a link or image on a web page to open a menu with different options.
Internet Opera Mobile menu On the menu bar, tap to open the menu. Tap to open the Settings screen where you can set the default home page, change display settings, set privacy settings, and more. Tap to view items being downloaded. You can also resume or stop current downloads. Tap to view information about the Web page you are browsing. Tap to see web pages that you have viewed. Tap to manage and view web pages that you have saved. Tap to open the Opera Mobile help file.
Internet 153 8.4 Using YouTube™ YouTube™ lets you browse, search, and watch video clips from the YouTube server. Note You need an active connection to use YouTube. If you are using a GPRS/3G connection, your data connection bill may increase significantly due to large file sizes of the videos. To open YouTube Tap Start > Programs > YouTube. Tap to open the Program Displays the current program Guide list. The Program channel being viewed.
Internet To add a new program channel into the Program Guide list 1. On the YouTube screen, tap . 2. On the Search screen, enter the channel you want to add to the Program Guide list. 3. Tap Search. YouTube searches for the channel and then displays the available videos from it. 4. Tap and then on the confirmation screen, tap OK. The channel you just subscribed to will now be shown when you tap Program Guide. Tip You can also add a YouTube user as a program channel.
Internet 155 Watching videos On the Videos, Bookmarks, or History screen, tap a video to launch the YouTube Video Player and use the on-screen buttons to control the playback. Note The YouTube Video Player always displays video in landscape orientation. Drag to go forward or backward in the video. Download progress Buffered video Tap to go back to the beginning of the video. Tap to toggle between playing and pausing the video. Tap to stop the video playback.
