User Manual www.htc.
Please Read Before Proceeding THE BATTERY IS NOT CHARGED WHEN YOU TAKE IT OUT OF THE BOX. DO NOT REMOVE THE BATTERY PACK WHEN THE DEVICE IS CHARGING. YOUR WARRANTY IS INVALIDATED IF YOU DISASSEMBLE OR ATTEMPT TO DISASSEMBLE THE DEVICE. PRIVACY RESTRICTIONS Some countries require full disclosure of recorded telephone conversations, and stipulate that you must inform the person with whom you are speaking that the conversation is being recorded.
Google, Google Maps and YouTube are trademarks of Google, Inc. in the United States and other countries. Copyright © 2008, Esmertec AG. All Rights Reserved. Copyright © 2003-2008, ArcSoft, Inc. and its licensors. All Rights Reserved. ArcSoft and the ArcSoft logo are registered trademarks of ArcSoft, Inc. in the United States and/or other countries. Copyright © 2004-2008, Ilium Software, Inc. All Rights Reserved.
No part of this document may be reproduced or transmitted in any form or by any means, electronic or mechanical, including photocopying, recording or storing in a retrieval system, or translated into any language in any form without prior written permission of HTC. Disclaimers THE WEATHER INFORMATION, DATA AND DOCUMENTATION ARE PROVIDED “AS IS” AND WITHOUT WARRANTY OR TECHNICAL SUPPORT OF ANY KIND FROM HTC.
Limitation of Damages TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL HTC OR ITS PROVIDERS BE LIABLE TO USER OR ANY THIRD PARTY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES OF ANY KIND, IN CONTRACT OR TORT, INCLUDING, BUT NOT LIMITED TO, INJURY, LOSS OF REVENUE, LOSS OF GOODWILL, LOSS OF BUSINESS OPPORTUNITY, LOSS OF DATA, AND/OR LOSS OF PROFITS ARISING OUT OF, OR RELATED TO, IN ANY MANNER, OR THE DELIVERY, PERFORMANCE OR NONPERFORMANCE OF OBLIGATIONS, OR
notebook computer has an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet which is properly installed and grounded in accordance with all local codes and ordinances. SAFETY PRECAUTIONS FOR POWER SUPPLY UNIT • Use the correct external power source A product should be operated only from the type of power source indicated on the electrical ratings label.
• Keep metal objects away so they don’t come in contact with the battery or its connectors as it may lead to short circuit during operation. • The phone should be only connected to products that bear the USB-IF logo or have completed the USB-IF compliance program. • Do not use a battery that appears damaged, deformed, or discolored, or the one that has any rust on its casing, overheats, or emits a foul odor.
PREVENTION OF HEARING LOSS CAUTION: Permanent hearing loss may occur if earphones or headphones are used at high volume for prolonged periods of time. NOTE: For France, Earphone (listed below) for this device have been tested to comply with the Sound Pressure Level requirement laid down in the applicable NF EN 503321:2000 and/or NF EN 50332-2:2003 standards as required by French Article L. 5232-1. • Earphone, manufactured by HTC, Model HS S200.
blasting operations are in progress. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. These include fueling areas, below deck on boats, fuel or chemical transfer or storage facilities, and areas where the air contains chemicals or particles, such as grain, dust, or metal powders. ROAD SAFETY Vehicle drivers in motion are not permitted to use telephony services with handheld devices, except in the case of emergency.
HEARING AIDS Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider, or call the customer service line to discuss alternatives. NONIONIZING RADIATION Your device has an internal antenna. This product should be operated in its normaluse position to ensure the radiative performance and safety of the interference.
General Precautions 11 • Avoid applying excessive pressure to the device Do not apply excessive pressure on the screen and the device to prevent damaging them and remove the device from your pants’ pocket before sitting down. It is also recommended that you store the device in a protective case and only use the device stylus or your finger when interacting with the touch screen. Cracked display screens due to improper handling are not covered by the warranty.
• Avoid wet areas Never use the product in a wet location. • Avoid using your device after a dramatic change in temperature When you move your device between environments with very different temperature and/or humidity ranges, condensation may form on or within the device. To avoid damaging the device, allow sufficient time for the moisture to evaporate before using the device.
Contents Chapter 1 Getting Started 23 1.1 Getting to Know Your Touch Phone and Accessories...................................... 24 Top panel......................................................................................................................................24 Left panel......................................................................................................................................24 Right panel......................................................................
Navigation Wheel......................................................................................................................42 1.8 Home Screen...................................................................................................... 42 1.9 Status Icons........................................................................................................ 43 1.10 Start Menu........................................................................................................ 47 1.
Home..............................................................................................................................................68 People............................................................................................................................................69 Messages......................................................................................................................................71 Mail..............................................................
Chapter 5 Synchronizing Information With Your Computer 101 Chapter 6 Exchanging Messages 111 5.1 About Synchronization...................................................................................102 Ways to synchronize.............................................................................................................. 102 5.2 Setting Up Windows Mobile® Device Center on Windows Vista®................. 103 Set up synchronization in Windows Mobile Device Center...........................
Set up a custom domain e-mail........................................................................................ 127 6.6 Using E-mail......................................................................................................128 Create a new e-mail message............................................................................................ 128 Compose and send an e-mail.............................................................................................
8.4 8.5 8.6 8.7 8.8 Zoom in and out on web pages........................................................................................ 157 Opera Mobile menu............................................................................................................... 158 Using YouTube™...............................................................................................159 Browse for videos.....................................................................................................
10.2 Downloading Satellite Data via QuickGPS.................................................. 193 Download options.................................................................................................................. 194 10.3 HTC Footprints™............................................................................................. 195 Create a photo with location information..................................................................... 195 Find a previously visited place............
11.2 11.3 11.4 11.5 On-screen controls and indicators................................................................................... 223 Menu Panel............................................................................................................................... 225 Zooming.................................................................................................................................... 226 The Review screen............................................................
21 12.5 Contacts......................................................................................................... 257 Add new contacts................................................................................................................... 258 Organize and search contacts............................................................................................ 259 Share contact information...................................................................................................
13.4 Using Connection Setup................................................................................ 289 13.5 Using Task Manager....................................................................................... 290 13.6 Protecting Your Device.................................................................................. 292 Protect your SIM card with a PIN....................................................................................... 292 Protect your device with a password........
Chapter 1 Getting Started 1.1 Getting to Know Your Touch Phone and Accessories 1.2 Installing the SIM Card, Battery, and Storage Card 1.3 Charging the battery 1.4 Using the Strap Holder 1.5 Using the In-Car Holder 1.6 Starting Up 1.7 Navigating On Your Device 1.8 Home Screen 1.9 Status Icons 1.10 Start Menu 1.11 Quick Menu 1.12 Adjusting the Volume 1.
Getting Started 1.1 Getting to Know Your Touch Phone and Accessories Top panel POWER Press to turn off the display temporarily. To turn off the power, press and hold for about 5 seconds. For more information, see “Starting Up” in this chapter. Left panel VOLUME UP During a call or when playing music, press here to increase the volume. VOLUME DOWN During a call or when playing music, press here to lower the volume. Right panel Stylus (See “Stylus” in this chapter for details.
Getting Started 25 Front panel Notification LED * See description below. Earpiece Listen to a phone call from here. GPS Press to launch the GPS navigation software. See Chapter 10 for details. TALK/SEND • Press to answer an incoming call or dial a number. • During a call, press and hold to toggle the speakerphone on and off. • Press and hold to use Voice Speed Dial. (See Chapter 12 for details.
Getting Started Back panel 3.2 Megapixel Camera See “Taking Photos and Videos” in Chapter 11 for details. Speaker Back Cover Strap Holder See “Using the Strap Holder” in this chapter for details. Bottom panel Microphone Sync Connector/Earphone Jack • Connect the supplied USB cable to synchronize information or plug in the power adapter to recharge the battery. • Connect the supplied USB stereo headset for hands-free conversation or for listening to audio media.
Getting Started 27 Accessories The product package includes the following items and accessories: • Battery • Power adapter • Screen protector • Stereo headset • USB sync cable • Pouch • In-car holder • Car charger • 1 GB microSD card (with pre-loaded map content for bundled GPS software) • Quick Start Guide • Getting Started and Application discs
Getting Started 1.2 Installing the SIM Card, Battery, and Storage Card You need to remove the back cover before you can install the SIM card, battery and storage card on your device. Also, make sure to always turn off the power before installing or replacing the SIM card and battery. To remove the back cover 1. Make sure your device is turned off. 2. Hold the device securely with the front facing down. 3. With your thumb or finger, lift up the bottom of the back cover. To replace the back cover 1.
Getting Started 29 SIM card The SIM card contains your phone number, service details, and phonebook/ message memory. Your device supports both 1.8V and 3V SIM cards. Note Some legacy SIM cards may not function with your device. You should consult with your service provider for a replacement SIM card. There may be fees for this service. Cut-off corner To install the SIM card 1. Make sure your device is turned off. 2.
Getting Started Battery Your device comes with a rechargeable Lithium-ion battery and is designed to use only manufacturer-specified original batteries and accessories. Battery performance depends on many factors, including network configuration, signal strength, the features or settings used, the temperature of the environment and the way in which you operate your device, and more.
Getting Started 31 To install the battery 1. Align the battery’s exposed copper contacts with the battery connectors inside the battery compartment. Ensure that the free end of the ribbon strip is visible above the battery. 2. Insert the contacts side of the battery first and then gently push the battery into place. 3. Replace the back cover. To remove the battery 1. Make sure your device is turned off. 2. Remove the back cover. 3. Pull the ribbon strip upward to release the battery.
Getting Started Storage card To have additional storage for your images, videos, music, and files, you can purchase a microSD™ card and install it into your device. To install a microSD card 1. Remove the back cover, 2. Insert the microSD card into the slot with its gold contacts facing down until it clicks into place. RESET Note To remove the microSD card, press it to eject it from the slot.
Getting Started 33 1.3 Charging the battery New batteries are shipped partially charged. Before you start using your device, it is recommended that you install and charge the battery. Some batteries perform best after several full charge/discharge cycles. To charge the battery 1. Connect the USB connector of the AC adapter to the sync connector on your device. 2. Plug in the AC adapter to an electrical outlet to start charging the battery.
Getting Started 1.4 Using the Strap Holder The strap holder at the bottom panel of your device allows you to attach a wrist strap, neck lanyard, or string accessory. To attach a strap, lanyard or string accessory to the strap holder 1. Remove the back cover. 2. Insert the loop of the strap, lanyard or string accessory through the small hole at the bottom of the back cover. 3.
Getting Started 35 1.5 Using the In-Car Holder Assemble and install the supplied in-car holder so you can use your device while inside a vehicle. Put together the in-car holder 1. Put the cradle on the base so that the two tabs on the base insert into the corresponding slots on the cradle. 2. Slide the cradle firmly down on the base so that the tabs click into place.
Getting Started Fix the holder in the car 1. Place the suction pad on the base on a smooth surface such as the windshield of the car. 2. Push the lever on the base so that the suction pad attaches firmly to the surface. Warning! Always ensure that the base of the in-car holder is attached firmly to a smooth, stable surface, otherwise it may become detached and fall, causing damage to your device. Put the device in the holder 1. Place the bottom edge of the device in the bottom part of the cradle.
Getting Started 37 Note When the device is on and you put it in the holder, NaviPanel automatically opens and offers you a convenient, one-touch interface to Footprints, the phone, and the GPS navigation software. For more information about NaviPanel, see Chapter 10. Remove the device from the holder 1. Pull the upper edge of the cradle slightly upwards, and with your fingers in the hole behind the cradle, push so that the device clicks out. 2. Lift the device out of the cradle, holding it firmly.
Getting Started 1.6 Starting Up After installing your SIM card and battery and charging the battery, you can now power on and start using your device. Turn your device on and off To turn on the power 1. Press the POWER button. 2. When you turn on your device for the first time, a Quick Start Wizard guides you to set up time zone, date and time, and password. For more information about these settings, see Chapter 13.
Getting Started 39 Note If you do not see the notification message, tap the title bar to display the System Status screen and then tap to display the message. 2. If your SIM card supports multiple network operator profiles, a message will appear with network profile choices. Select the profile you want to use and tap OK. 3. Connection Setup then starts to configure your device’s data connection settings. 4. After the Connection Setup completes the configuration, tap Restart.
Getting Started Touch or tap When selecting items on the screen, such as the Home screen tabs, Start menu, programs and settings icons, and large on-screen buttons, simply touch them with your finger. Apply some pressure with your finger pad when touching an item on the screen. Tapping means to touch lightly and quickly with your finger pad or fingertip. On screens that display smaller-size items, you can more accurately select an item by tapping it with your fingertip.
Getting Started 41 The following are some instances when you would use sliding: • Switching between Home screen tabs Slide your finger left and right to switch between the Home screen tabs. For more information, see “Using the TouchFLO Home screen“ in Chapter 3. • Advancing playback In Windows Media® Player Mobile, slide your finger horizontally on the progress bar to advance forward or move backward in the music or video you are playing.
Getting Started Navigation Wheel On the home screen and in many programs on your device, you can use the Navigation Wheel to move through menus and instructions. Rotate the wheel or press the control up, down, left, and right to move around the screen. When an item has been selected on the screen, press the ENTER button (the center button) to confirm your selection. In some programs such as Camera and Opera Mobile, you can also rotate the wheel to zoom in or out. 1.
Getting Started 43 1.9 Status Icons When you touch or tap the icon area of the title bar, the System Status screen opens and displays larger status icons so you can touch them with your finger more easily and accurately. Tip The System Status screen can be disabled in TouchFLO settings. See “Settings on your Device” in Chapter 13 for details. The following are some of the status icons that you may see on the device.
Getting Started Icon Description Connection Setup Multiple notifications; tap the icon to view all New text messages; SMS notification of voice mail Sending MMS Receiving MMS MMS sent Cannot send MMS New incoming MMS New Windows Live™ message Missed call Speakerphone on Roaming Alarm Other wireless network(s) detected Wired headset connected
Getting Started 45 2 Icon Description Icon Description GPRS available Connected to a wireless network EDGE available Connection is active HSDPA available WCDMA/UMTS available 3 Icon Description GPRS connecting GPRS in use EDGE connecting EDGE in use HSDPA connecting HSDPA in use WCDMA/UMTS connecting WCDMA/UMTS in use Maximum signal strength No signal Connection is not active Synchronization in progress
Getting Started Icon Description Phone is turned off No phone service Searching for phone service Voice call in progress Call on hold Calls are forwarded Dialing while no SIM card is inserted No SIM card inserted 4 Icon Description Vibrate mode Sound on Sound off 5 Icon Description Battery charging Battery full Battery low
Getting Started 47 1.10 Start Menu The Start menu, which can be opened from the top left corner of the screen, gives you access to all the programs and settings of your Windows Mobile-powered device. Touch or tap to select an item on the Start menu. Open the Start menu. Open a recently-used program. When you are on another screen, touch or tap this item to return to the TouchFLO Home screen. Open a program. Access more programs. View and change settings. View Help information for the current screen.
Getting Started 1.11 Quick Menu The Quick menu, which can be opened from the top right corner of the screen, shows the currently running programs. You can quickly switch between running programs, stop programs, and see how much program memory is being used. Customize Task Manager settings. (See “Using Task Manager” in Chapter 13.) Stop all currently running programs. Touch this icon to open the Quick Menu. Shows the total percentage of program memory in use. Touch to open the Memory settings screen.
Getting Started 49 1.12 Adjusting the Volume Adjusting the system volume changes the volume level of sound notifications and audio/video playback, whereas adjusting the ring volume affects only the volume of the phone ring. The system volume and ring volume can be separately adjusted. 1. Touch the icon area in the title bar and then touch the Speaker icon ( the System Status screen. ) on 2. To switch between the Ring Volume and System Volume screens, touch Ring or System on top of the screen. 3.
Getting Started 1.13 When Connecting Your Device to a Computer Whenever you connect your device to the computer with the USB cable, the Connect to PC screen will be displayed and will prompt you to choose the type of USB connection: ActiveSync Select this mode when you need to do the following: • Synchronize Outlook e-mail messages, contacts, calendar appointments, files, and other data between your device and your computer. • Have read and write access to the whole device.
Getting Started 51 When Disk Drive mode is enabled while your device is connected to the computer: • You will not be able to use your device to access files from the storage card or run applications that are installed on the storage card while the device is connected to your computer. • Your computer will only connect to the device’s storage card. When you access your device from the computer, you will only see the contents of the device’s storage card.
Getting Started
Chapter 2 Using Phone Features 2.1 The Phone Screen 2.2 Making Calls 2.3 Answering and Ending Calls 2.4 Call History 2.5 Speed Dial 2.6 Turning the Phone Function On and Off 2.
Using Phone Features 2.1 The Phone Screen Like a standard mobile phone, you can use your device to make, receive, and keep track of calls and send text messages. To open the Phone screen, do one of the following: • On the Home screen, tap Phone. • Press the TALK/SEND button. TALK/SEND button Enter your PIN Most SIM cards are preset with a PIN (personal identification number) that is provided by your wireless service provider. 1. Enter the preset PIN assigned by your wireless service provider.
Using Phone Features 55 2.2 Making Calls To make a call, you can either dial a number or select a contact you want to call. Make a call from the Phone screen The Phone’s Smart Dial feature makes it quick and easy for you to place a call. When you start entering a phone number or contact name, Smart Dial automatically searches and sorts the contact entries on the SIM card, in Contacts, and the phone numbers in Call History (including incoming, outgoing, and missed calls).
Using Phone Features 3. Tap to close the phone keypad and to see if there are more matching numbers or contacts in the Smart Dial panel. To browse through the filtered list, flick through the list, slide your finger up or down the list slowly, or press NAVIGATION up/down. Smart Dial panel 4. To call a number or contact, do one of the following: • Tap the desired phone number or contact from the list.
Using Phone Features 57 Make a call from Contacts On the Home screen, tap Start > Contacts to open the Contacts screen. Do one of the following: • Select the contact to call and then press TALK/SEND. Note If the contact has more than one number stored, press NAVIGATION right/left to select the number you want to call before pressing TALK/SEND. • Tap the contact to open the contact details and then tap the phone number you want to call.
Using Phone Features Make an international call 1. Tap and hold the number 0 key on the Phone screen until the plus (+) sign appears. The plus (+) sign replaces the international prefix of the country that you are calling. 2. Enter the full phone number you want to dial, and press the TALK/SEND button on your device. The full phone number includes the country code, area code (without the leading zero, if any), and phone number. Call voice mail Number 1 is generally reserved for your voice mail.
Using Phone Features 59 To reject a call and send a text message When you reject a call, you can choose to automatically send a text message to the mobile phone of the caller. 1. On the Phone screen, tap Menu > Options > Advanced tab. 2. Select the Reject call with text message check box. 3. Change the default text message if needed, then tap OK. When Reject call with text message is enabled, tap Send Text when the phone rings to reject the call and send the text message to the caller.
Using Phone Features To put a call on hold Your device notifies you when you have another incoming call, and gives you the option of rejecting or accepting the call. If you are already on a call and accept the new call, you can choose to switch between the two callers, or set up a conference call between all three parties. 1. Press the TALK/SEND button to take the second call and put the first call on hold. 2. To end the second call and return to the first call, tap End Call or press END on your device.
Using Phone Features 61 To mute the microphone during a call Tap to toggle between turning on or off the microphone. When the microphone is turned off, the mute icon appears on the screen. To access the TouchFLO Home tab during a call 1. If the display is turned off, press the POWER button to turn it on. 2. Press and hold the END button. To end a call When a call is in progress, tap End Call or press the END button to hang up.
Using Phone Features 2.4 Call History Use Call History to check for missed calls, dialed numbers, and calls received. To open the Call History screen, tap Menu > Call History on the Phone screen. If you have a long list of calls in the Call History, tap one of the buttons at the bottom of the screen to filter the list according to the type of call. All Calls Received Missed Dialed 2.5 Speed Dial Use Speed Dial to call frequently-used numbers with a single tap.
Using Phone Features 63 4. In Location, select an available key to use as the speed dial key. 5. Tap OK. Tips • To create a Speed Dial entry from Contacts or SIM card contacts, tap the contact, select the number you want to add to Speed Dial, then tap Menu > Add to Speed Dial. • To delete a Speed Dial entry, in the Speed Dial list, tap and hold the desired entry, then tap Delete. 2.
Using Phone Features 2.7 Setting Up Bluetooth SIM Access for Car Kit Phones Bluetooth car kits that support the SIM Access Profile (SAP) can connect to your device and access its SIM card via Bluetooth. Once a SAP connection has been established, you can download SIM contacts from your device to the car kit phone. You can also use the car kit phone to answer and make calls using your device’s SIM card.
Chapter 3 TouchFLO™ 3.1 About TouchFLO™ 3.2 Using the TouchFLO Home Screen 3.
TouchFLO™ 3.1 About TouchFLO™ TouchFLO™ gives you touch control over your Windows Mobile-powered device. TouchFLO provides the following features: • A Home screen that allows finger-touch access to the most widely-used functions, such as People, Messages, Mail, Music, Internet, and more • Finger gestures that allow you to navigate screens 3.
TouchFLO™ 67 To switch between the tabs of the Home screen Do one of the following: • Touch or tap the desired tab on the Home screen. • Press Navigation Right or Left to move to the next or previous tab. • Press and hold your finger on the active tab, then slide your finger right or left over the tabs. Release when you have selected the desired tab. Note Apply some pressure when pressing and holding on the active tab to be able to slide over the tabs.
TouchFLO™ Home The Home tab displays the current date, an analog and digital clock, and a yellow alarm hand that indicates whether the alarm is on or off. Missed calls and your upcoming calendar appointment are also shown on the Home tab. To select an item on the Home tab • Touch the item; or • Press Navigation Up or Down first to navigate to the item you want to select and then press ENTER. Touch this area to open the Clock & Alarms screen where you can set the date, time, and alarm.
TouchFLO™ 69 People On the People tab, you can add favorite contacts who you most frequently communicate with. This allows you to quickly make calls, send text messages, and send e-mails to your favorite contacts. Tip You can add up to 12 favorite contacts on the People tab. To add a favorite contact 1. On the Home screen, slide your finger to the People tab. 2. Touch an empty slot on the screen. 3. On the Select a Contact screen, touch the name of the desired contact.
TouchFLO™ The following icons will appear below the pictures to indicate the type of contact information that is associated to each favorite contact: Mobile phone Home phone Work phone E-mail SMS text messaging To choose from your favorite contacts • Swipe your finger up to scroll down the favorite contacts on the screen, or swipe your finger down to scroll up. • Touch the area below the contact picture to place a call, send a text message, or send an e-mail to the favorite contact.
TouchFLO™ 71 Messages On the Messages tab, you can read SMS text messages as they arrive and create a new SMS text message. You can also view the text of received MMS messages on this tab. When there are new incoming SMS/MMS messages, the icon on the Messages tab will show the number of new messages. For example, indicates that there is a new message received. Touch this icon to create a new SMS text message. To view the entire message thread from the sender and reply, touch the message on the screen.
TouchFLO™ Mail The Mail tab is where you send and receive e-mail messages. Including Outlook E-mail, you can add up to seven POP3/IMAP4 and web-based e-mail accounts in this tab. To add an e-mail account 1. On the Home screen, slide your finger to the Mail tab. 2. If this is your first time to add an e-mail account, touch New Account at the bottom-left side of the screen. 3. Set up your e-mail account using the E-mail Setup wizard. 4.
TouchFLO™ 73 Tips • On the Mail tab, touch Inbox at the lower-left side of the screen to access all e-mail messages of the currently selected account. • To manually download e-mail messages for the currently selected account, touch Menu > Send/Receive. For more information about working with e-mail messages, see Chapter 6 and 7. Footprints On the Footprints tab, you can take pictures, record and share information of places you visit, and navigate to those places using the GPS navigation software.
TouchFLO™ Once you have taken a photo, Footprints uses GPS to search for your position. This information is stored with the photo. The photo you took is then displayed. GPS status indicator.
TouchFLO™ 75 Internet On the Internet tab, you can open Opera Mobile™ to browse the web and add web favorites for one-touch access to your favorite web sites. Touch here to browse the web using Opera Mobile. Touch All Bookmarks to open Opera Mobile and add, view or delete web favorites. Swipe upward or press Navigation Down to scroll down the screen and access more web favorites. For more information about using Opera Mobile, see Chapter 8.
TouchFLO™ To set an album as a Favorite 1. On the Photos and Videos tab, touch Album to open the Album program. 2. Touch Albums and then select one of the listed favorite albums. 3. Tap Menu > Set Album as Favorite and then tap OK on the confirmation screen. To view photos and videos Touch here to take a photo. Touch the photo or video on the screen to view or play it in full screen. Touch here to open the Album program. (See “Viewing Photos and Videos Using Album” in Chapter 11 for details.
TouchFLO™ 77 Music The Music tab allows you to visually browse through albums and music tracks and play music. The albums and music tracks that you see on the Music tab are from a selected category or playlist in the Library. Note Your device searches for all music files that have the following audio formats: MP3 (.mp3), WMA (.wma), AAC/AAC+/eAAC+ (.aac), and MPEG-4 (.m4a). It searches for music from the following locations: Device: \My Music (including all subfolders) \My Documents (including all subfol
TouchFLO™ To move forward or backward in the music Do one of the following: • Touch and hold on the thin bar below the album art to display the progress bar: Drag your finger right or left on the progress bar to move forward or backward in the current music. • Rotate the NAVIGATION WHEEL as follows: Rotate clockwise to advance forward in the music Rotate counterclockwise to move backward in the music To set repeat and shuffle modes Touch Menu > Repeat to loop the songs.
TouchFLO™ 79 To select music from Audio Manager Audio Manager organizes music into categories, such as Artists, Album, Genre, All Songs, and more. After you have added more albums or music tracks to your device, go to Audio Manager to choose the new albums or music tracks that you want to play. 1. On the Music tab, touch Library. 2. Audio Manager displays the All Songs category which lists all the song tracks found on your device. Touch any song in the list to play it on the Music tab.
TouchFLO™ Weather The Weather tab shows you the current weather as well as weather information for the next four days of the week. To add a city The Weather tab can display weather information of your local city and other added cities. Follow the steps below to add a city on this tab. Tip You can add up to 10 cities on the Weather tab. 1. On the Weather tab, tap Menu > Add Location. The Select City screen then appears. 2.
TouchFLO™ 81 Shows the last weather update. To switch between cities, swipe your finger upward/downward, tap the Up/Down arrow on the screen, or press Navigation Up/Down. Touch to update the weather information. Touch Menu to add or delete a city and configure weather settings. To customize weather settings 1. On the Weather tab, touch Menu > Settings. 2. You can choose from the following options: • Download weather data automatically.
TouchFLO™ Map Search (available by country) The Map Search tab uses Google Maps to search for locations and display maps. On this tab, you can type in and search for a street address or for places of interest near your current location, such as restaurants, hotels, and more. To search for a location Enter the street address or a place of interest (such as hotel, restaurant, or others) in the search bar. Tip Tap this icon to perform the search.
TouchFLO™ 83 Settings The Settings tab allows you to synchronize information with your computer or the Exchange Server, select a phone profile and other sound settings, and choose a different wallpaper for the Home tab. You can also easily turn on and off the communications features of your device such as Wi-Fi and Bluetooth, and change what location data is sent and received on your device.
TouchFLO™ To set sounds or notifications for events To personalize your device with unique sounds or notifications for different events such as missed calls, new SMS, and more, touch Sounds on the Settings tab and then touch Advanced. For more information about setting sounds and notifications, see “To choose how to be notified about events or actions” in Chapter 13. To change the background image You can change the background image of the Home tab by following these steps: 1.
TouchFLO™ 85 Programs The Programs tab allows you to add your favorite programs for one-touch access. Touch a program icon to open the corresponding program. Touch an empty slot to add a favorite program. Touch All Programs to access all the programs of your device. Touch Remove to choose which program to remove from the Programs tab. When you have filled up the screen with programs, scroll down the Programs tab to access more empty slots and add more programs.
TouchFLO™ 3.3 Finger Gestures You can use finger gestures to scroll, zoom and pan on the touch screen. Finger scrolling Finger scrolling can be used to scroll up and down web pages, documents, and lists such as the contacts list, file list, message list, calendar appointments list, and more. When finger scrolling, swipe or flick your finger on the touch screen. To scroll up and down • To scroll down, swipe your finger upward on the touch screen.
TouchFLO™ 87 Finger zooming The type of finger gesture to use when zooming varies in different programs. • To zoom in on a web page in Opera Mobile, tap your finger twice on the screen. See “Using Opera Mobile” in Chapter 8 for details. • To zoom in on a photo in Album, make a full-circle swipe on the touch screen. See “Viewing Photos and Videos Using Album” in Chapter 11 for details.
TouchFLO™
Chapter 4 Entering Text 4.1 Selecting an Input Method 4.2 Using the Full QWERTY 4.3 Using the Compact QWERTY 4.4 Using the Phone Keypad 4.5 Using Multitap and T9 Modes 4.6 Using Numeric and Symbol Mode 4.7 Using Block Recognizer 4.8 Using Letter Recognizer 4.
Entering Text 4.1 Selecting an Input Method When you start a program or select a field that requires text or numbers, the Input Panel icon becomes available on the menu bar. Tap the Input Selector arrow (that appears next to the Input Panel icon) to open a menu where you can select a text input method and customize input options. After selecting a text input method, the corresponding Input Panel is displayed, which you can use to enter text. Tip Select Other Input Methods to display more input methods.
Entering Text 91 4.2 Using the Full QWERTY The Full QWERTY is a full on-screen QWERTY keyboard layout similar to a desktop PC keyboard. Tip You can also use the Windows Mobile on-screen keyboard which also has a QWERTY keyboard layout by selecting Keyboard (or Other Input Methods > Keyboard) on the Text input method menu. • Tap to enter letters or symbols. • Tap and hold to enter a punctuation mark, symbol, or number that appears on top of a key. • Tap to enter an uppercase letter.
Entering Text 4.3 Using the Compact QWERTY The Compact QWERTY is a type of on-screen keyboard which features 20 keys. With its large, touch-friendly keys and enhanced features such as T9 predictive input, you can enter text faster and more accurately. • Tap to enter letters or symbols. • Tap and hold to enter a punctuation mark, symbol, or number that appears on top of a key Displays the word candidate list in T9 mode. Tap a word to insert it into your text. Tap to add a word to the T9 dictionary.
Entering Text 93 4.4 Using the Phone Keypad The Phone Keypad is a 12-key on-screen keypad that has a layout similar to mobile phone keypads, plus some additional keys. The Phone Keypad has large keys and enhanced input features such as T9 predictive input, which makes it faster for you to enter text in your messages and documents. Displays the word candidate list in T9 mode. Tap a word to insert it into your text. Tap to add a word to the T9 dictionary. • Tap to enter letters or symbols.
Entering Text 4.5 Using Multitap and T9 Modes When using the on-screen keyboards, you can choose to enter text using Multitap or T9 mode. Multitap mode In Multitap mode (for Compact QWERTY and Phone Keypad), enter a character by tapping a key until the desired character is displayed on the screen. • To enter the first letter that shows on a key, tap the key once. To enter the second letter, tap twice.
Entering Text 95 Tap to not add the word. To customize Touch Input settings 1. Tap the Input Selector arrow, then tap Touch Input Settings. 2. On the Touch Input Settings screen, select or clear the following options according to your preferences: • Spell Correction. Lets you correct typographical errors by selecting from a list of possible words that reflect the characters of the keys you have tapped as well as characters of nearby keys. • Word Completion in T9 mode.
Entering Text 4.6 Using Numeric and Symbol Mode Switch to Numeric and Symbol mode to let you easily enter numbers and common symbols such as parentheses, braces, currency signs, punctuation marks, special characters, and more. Numeric and Symbol mode is available when using the Full QWERTY, Compact QWERTY, and Phone Keypad. Tap a number or symbol to insert it into your text. Tap to go to the previous or next page of symbols. See “To lock the keyboard in Numeric and Symbol mode.
Entering Text 97 Tip In Compact QWERTY and Phone Keypad, tap / to toggle between locking the keyboard in Numeric and Symbol mode and switching back to the letter keyboard layout after tapping a symbol or number. 4.7 Using Block Recognizer With Block Recognizer, you use a single stroke to write letters, numbers, symbols, and punctuation, which are then converted into typed text. To use Block Recognizer 1. From a program, tap the Input Selector arrow and then tap Other Input Methods > Block Recognizer. 2.
Entering Text 4.8 Using Letter Recognizer With Letter Recognizer, you can write individual letters, numbers, and punctuation marks, which are then converted into typed text. To use Letter Recognizer 1. From a program, tap the Input Selector arrow and then tap Other Input Methods > Letter Recognizer. 2. Write characters, numbers, and symbols in the designated writing area. • Enter uppercase letters by writing in the ABC (left) area of the box.
Entering Text 99 To enter punctuation and symbols Transcriber comes with an on-screen keyboard that provides an easy way to add punctuation or a special symbol to existing text. To use this on-screen keyboard, tap on the Transcriber toolbar. The keyboard remains visible until you tap the button again. Tips • To reposition the keyboard, tap and hold the title bar, then drag to the desired location.
Entering Text
Chapter 5 Synchronizing Information With Your Computer 5.1 About Synchronization 5.2 Setting Up Windows Mobile® Device Center on Windows Vista® 5.3 Setting Up ActiveSync® on Windows XP® 5.4 Synchronizing With Your Computer 5.5 Synchronizing via Bluetooth 5.
Synchronizing Information With Your Computer 5.1 About Synchronization You can take information from your computer wherever you go by synchronizing them to your device.
Synchronizing Information With Your Computer 103 Bluetooth. For more information about setting up a Bluetooth partnership, see Chapter 9. For information about synchronizing through Bluetooth, see “Synchronizing via Bluetooth” later in this chapter. Try to synchronize regularly in order to keep information up-to-date in both your device and your computer. Notes • You can also synchronize Outlook e-mail, contacts, calendar, and tasks on your device with the Exchange Server at your work.
Synchronizing Information With Your Computer 3. On the Windows Mobile Device Center’s Home screen, click Set up your device. Note Choose Connect without setting up your device if you only want to transfer media files, check for updates, and explore your device but not synchronize Outlook information. 4. Select the items you want to synchronize, then click Next. 5. Enter a device name, then click Set Up.
Synchronizing Information With Your Computer 105 Use Windows Mobile Device Center To open Windows Mobile Device Center, click Start > All Programs > Windows Mobile Device Center on your Windows Vista computer. On Windows Mobile Device Center, you can do the following: • Click Mobile Device Settings to change synchronization settings.
Synchronizing Information With Your Computer 5.3 Setting Up ActiveSync® on Windows XP® The Getting Started disc that comes with your device contains Microsoft ActiveSync 4.5 or later. Follow the steps in this section to install and set up ActiveSync on Windows XP or other compatible Windows systems. Note For a list of compatible Windows systems, go to http://www.microsoft.com/windowsmobile/activesync/activesync45.mspx. Install ActiveSync 1.
Synchronizing Information With Your Computer 107 When you finish the wizard, ActiveSync synchronizes your device automatically. Notice that Outlook e-mails and other information appear on your device after synchronization. 5.4 Synchronizing With Your Computer Connect and synchronize your device with your computer using the USB cable or Bluetooth connection. Start and stop synchronization You can manually synchronize either from your device or computer.
Synchronizing Information With Your Computer Change which information is synchronized You can change the information types and the amount of information to synchronize for each type either on your device or your computer. Follow the steps below to change synchronization settings on your device. Note Before changing synchronization settings on your device, disconnect it from your computer. 1. In ActiveSync on your device, tap Menu > Options. 2.
Synchronizing Information With Your Computer 109 Troubleshoot sync connection problem In some cases, when the computer connects to the Internet or a local network, it may disconnect the connection with your device in favor of the Internet or network connection. If this happens, tap Start > Settings > Connections tab > USB to PC, then clear the Enable faster data synchronization check box. This makes your computer utilize a serial USB connection with your device. 5.
Synchronizing Information With Your Computer 5.6 Synchronizing Music and Video If you want to carry your music or other digital media along with you while you travel, set up Windows Media® Player on your computer to synchronize music and video with your device. Other than selecting the Media information type to be synchronized, all media synchronization settings must be set in Windows Media® Player.
Chapter 6 Exchanging Messages 6.1 Messaging 6.2 Text Messages 6.3 MMS 6.4 Types of E-mail Accounts 6.5 E-mail Setup Wizard 6.
Exchanging Messages 6.1 Messaging Messaging is a central location where you will find all types of messaging accounts, which include text messages (SMS), multimedia messages (MMS), and e-mail accounts. To select a messaging account Do one of the following: • On the TouchFLO Home screen, slide to the Mail tab and then touch Menu > Accounts > Accounts. The Account Picker screen then opens where you can select an account. Tip • You can also tap Start > Messaging to access the Account Picker screen.
Exchanging Messages 113 4. Select the Use signature with this account check box. 5. In the provided text box, enter the information that will be displayed as your signature. 6. If you want the signature to be added whenever you reply or forward messages, select the Use when replying and forwarding check box, then tap OK. 7. Repeat the steps to add a signature to other messaging accounts. 6.2 Text Messages Send short text messages (SMS) to other mobile phones. SMS messages have a 160-character limit.
Exchanging Messages From the Account Picker screen 1. Tap Start > Messaging > SMS \ MMS. 2. Tap Menu > New > SMS. From the Contacts screen 1. Tap Start > Contacts. 2. Tap the contact’s name to open his or her contact card. 3. Touch Send text message. Compose and send a text message After creating a new text message, follow the steps below to enter your message and then send it. 1. To add recipients, enter their mobile phone numbers in the To field, separating them with a semicolon.
Exchanging Messages 115 Manage text messages Text messages that are sent to and received from a contact (or number) are grouped as a single thread in your inbox. Threaded SMS lets you see exchanged messages (similar to a chat program) with a contact on the screen. To reply to a text message 1. In the SMS \ MMS inbox, tap a message thread to open it. 2. At the bottom of the screen, type your reply message and then tap Send.
Exchanging Messages To copy a message in the thread to the SIM card 1. In the SMS \ MMS inbox, tap the message to open it. 2. Use the Navigation Up or Down control to select a message in the thread that you want to copy to the SIM card. Note You cannot copy a sent message from the thread to the SIM card. 3. Tap Menu > Copy to SIM. To copy a text message from the SIM card to the device 1. In the SMS \ MMS inbox, select the SIM message you want to copy. 2. Tap Menu > Copy to Phone.
Exchanging Messages 117 Tip Tap Menu > Advanced Composer after adding a picture/video, audio, or attachment to compose an MMS message complete with text, emoticons, media and attachments. 3. Tap Send. Tip You can also insert a vCard or vCalendar in your MMS message. 6.3 MMS Sending multimedia messages (MMS) to your friends and family is fun and easy. You can include pictures, videos, and audio clips in a multimedia message.
Exchanging Messages 4. Tap the Servers tab and check if your device is preset with MMS server settings. If there are no preset settings, tap New and enter the following information, which you obtained from your wireless service provider: • Gateway. Location of the MMS server, which is usually in the form of an IP address. • Port number. HTTP port number used for connecting to the MMS server and for file transfer. • Server address. URL address of the server where MMS messages are stored.
Exchanging Messages 119 • If you add several MMS message service providers to the Settings screen, you can choose one as your default provider. Select the provider's name in the list, then tap Set As Default. Create and send MMS messages You can compose MMS messages in a combination of slides, where each slide can consist of a photo, video or audio clip, and/or text. To compose an MMS message 1. Tap Start > Messaging > SMS \ MMS, then tap Menu > New > MMS. 2.
Exchanging Messages 7. To add more slides, tap or tap Menu > Slides > Insert Slide. Repeat steps 5 and 6 to insert photos/videos, text, and audio onto your slides. 8. Tap Send to send the MMS message. Tip You can also send an MMS message from Pictures & Videos, Album, or the Camera program. To add text to an MMS message When you tap Insert text here on your MMS message, an empty screen appears where you can enter your text.
Exchanging Messages 121 2. Select an audio file. When selected, you can: • Tap • Tap Select to insert it into your MMS message. • Note to play the audio clip, Tap Exit ( to pause, or to stop playback. ) to quit selection and return to your MMS message. To record a new audio clip and add it to your MMS message, tap . The Record popup window then opens. Tap Record to start recording, and Stop to end the recording. Tap Play to listen to the recorded audio clip, then tap Add.
Exchanging Messages To block a phone number from sending you MMS messages If you do not want to receive MMS messages from a particular sender, you can add the sender’s phone number to the MMS Blacklist. 1. When you receive a new MMS message, open and view the message. 2. To avoid receiving MMS messages from this sender next time, tap Menu > Show > Message Detail. 3. On the Message Detail screen, tap Menu > Show Contact Details. 4. Tap Menu > Save to Blacklist. 5. Tap Done.
Exchanging Messages 123 Set up your device to synchronize Outlook e-mail with the computer If you have installed the synchronization software on your computer and created a partnership with your device, then your device is ready to send and receive Outlook e-mail. If you have not yet installed the synchronization software nor created a partnership, do so by following the procedures in Chapter 5.
Exchanging Messages 6.5 E-mail Setup Wizard Windows Mobile’s E-mail Setup wizard walks you through the process of setting up your e-mail account. It has an Auto Setup feature which can automatically set up your e-mail account based on the e-mail address and password that you enter, if your e-mail provider settings are preconfigured on your device.
Exchanging Messages 125 4. Enter Your name and the Account display name and then tap Next. Note If the E-mail Setup wizard was unsuccessful in finding and downloading settings from the Internet, select Internet e-mail from the Your e-mail provider list on the next screen. You will be asked to enter e-mail server settings. See “To specify e-mail server settings” for details. 5.
Exchanging Messages To customize download and format settings Before you tap Finish when setting up your POP3 or IMAP4 e-mail account, you can tap the Review all download settings link at the bottom of the screen to choose download options, message format, and other settings.
Exchanging Messages 127 Set up a custom domain e-mail When you are using an e-mail domain name that is hosted by a different e-mail provider (for example, your e-mail address may be Benjamin@startup.com but Email.com hosts the e-mail account and provides e-mail services), select the Custom Domain option in the E-mail Setup wizard to set up your e-mail account on your device. 1. Add a new e-mail account. See “Add an e-mail account” for instructions. 2.
Exchanging Messages 6.6 Using E-mail After setting up e-mail accounts on your device, you can start sending and receiving e-mail messages. Create a new e-mail message Depending on your preference, there are two ways you can create a new e-mail message. To start from an empty message 1. On the TouchFLO Home screen, slide to the Mail tab. 2. Select the e-mail account you want to use on the right side of the screen. 3. Touch the New Mail icon ( ) to create a new e-mail.
Exchanging Messages 129 Compose and send an e-mail After creating a new e-mail, follow the steps below to enter your message and then send it. 1. To add recipients, enter their e-mail addresses, separating them with a semicolon. You can also tap To if you want to add e-mail addresses stored in Contacts. 2. Enter a subject and compose your message. Tip To choose from preset messages, tap Menu > My Text and tap a desired message. To check the spelling, tap Menu > Spell Check. 3. Tap Send.
Exchanging Messages For example, entering “B”, then “E” narrows the list to only the e-mails that contain sender names and e-mail subjects that start with “BE.” View and reply to messages To download a complete e-mail By default, each e-mail received in the inbox on your device contains only the first few kilobytes of the message. When you open an e-mail, it displays only the headers and part of the message. You must download the whole e-mail to view the complete content.
Exchanging Messages 131 Fetch Mail is also available for Outlook E-mail. See “Instant download through Fetch Mail” in Chapter 7 for details. • Download may take some time, depending on the speed of your Internet connection, size of the whole e-mail, and whether file attachments are automatically downloaded. To download file attachments • POP3 e-mail account: File attachments of a POP3 Internet e-mail account are automatically downloaded when you download a complete e-mail.
Exchanging Messages Synchronize e-mails Synchronizing e-mails ensures that new e-mails are downloaded to the device Inbox folder, e-mails in the Outbox folder are sent, and e-mails deleted from the server are removed from your device. The manner in which you synchronize e-mails depends on the type of e-mail account you have. To automatically synchronize an Outlook e-mail account 1. Connect your device to your computer through USB or Bluetooth.
Exchanging Messages 133 To change the download size and format for Internet e-mail 1. Tap Menu > Options on the Account Picker screen, or tap Menu > Tools > Options while you’re in a message list. 2. Tap your POP3 or IMAP4 Internet e-mail account. 3. Tap Download Size Settings. 4. Under Message format, select HTML or Plain Text. 5. Under Download size limit, select the desired e-mail size. 6. Tap Done. To automatically receive attachments on Outlook e-mails 1. Tap Start > Programs > ActiveSync. 2.
Exchanging Messages
Chapter 7 Working With Company E-mails and Meeting Appointments 7.1 Synchronizing with the Exchange Server 7.2 Working With Company E-mails 7.3 Managing Meeting Requests 7.
Working With Company E-mails and Meeting Appointments 7.1 Synchronizing with the Exchange Server To keep up-to-date with your company e-mails and meeting schedules while you’re out of the office, you can connect your device to the Internet through Wi-Fi or a data connection and synchronize with your company’s Exchange Server. Set up an Exchange Server connection Before you can synchronize or access information on the Exchange Server, you need to set up an Exchange Server connection on your device.
Working With Company E-mails and Meeting Appointments 137 9. Select the items that you want to sync with the Exchange Server. Tips • To change synchronization settings of an information item, for example, E-mail, select the item, then tap Settings. • To change the rules for resolving synchronization conflicts, tap Menu > Advanced. 10. Tap Finish.
Working With Company E-mails and Meeting Appointments 7.2 Working With Company E-mails Your device gives you instant access to your company e-mails and lets you manage your messages easier. Direct Push, Fetch Mail, Remote e-mail search, and e-mail flags are just some of the tools you can use to manage your e-mails. Note Some messaging features depend on the Microsoft Exchange Server version used in your company. Check with your network administrator for the availability of these features.
Working With Company E-mails and Meeting Appointments 139 To turn on Direct Push in ActiveSync 1. Tap Start > Programs > ActiveSync and then tap Menu > Schedule. 2. Select As items arrive in the Peak times and Off-peak times boxes. Note When Direct Push is off, you need to manually retrieve your e-mails. Scheduled synchronization If you do not want to use Direct Push, you can set a regular schedule for synchronizing Outlook e-mail and information. 1. In ActiveSync on your device, tap Menu > Schedule. 2.
Working With Company E-mails and Meeting Appointments 3. By default, only the first few words of the message is shown. To download the whole e-mail, finger-scroll to the end of the message, then tap Get the rest of this message. 4. Wait for the remainder of the message body to download. Notes • For information about changing e-mail sync options such as setting the download size for e-mail, see "Customize e-mail settings" in Chapter 6.
Working With Company E-mails and Meeting Appointments 141 Flag your messages Flags serve as a reminder for you to follow-up on important issues or requests contained in e-mail messages. Flagging messages, which has been a useful feature on desktop Outlook E-mail, can also be done in Outlook Mobile on your device. You can flag received e-mail messages on your device. Requirement Flags are enabled only if e-mails are synchronized with Microsoft Exchange Server 2007 or higher.
Working With Company E-mails and Meeting Appointments Out-of-office auto-reply Outlook Mobile allows you to retrieve and change your out-of-office status. Just like desktop Outlook E-mail, Outlook Mobile automatically sends an autoreply message when you’re not available. To send out-of-office auto-reply messages 1. Tap Start > Messaging > Outlook E-mail. 2. Tap Menu > Tools > Out of Office. 3. In the I am currently list, select Out of the Office. 4. Enter your auto-reply message, then tap Done. 7.
Working With Company E-mails and Meeting Appointments 143 • If the time of the meeting conflicts with your other appointments, a “Scheduling Conflict” status appears on top of the e-mail. 3. Choose whether or not to edit your response e-mail before sending, then tap OK. If you accepted the meeting request, it will automatically be added as an appointment in Calendar on your device. To view the list of meeting participants 1. Tap Start > Calendar. 2.
Working With Company E-mails and Meeting Appointments • To view an attendee’s contact information, tap the attendee’s name. If the attendee is included in your contacts list, you will see the contact information immediately. If the attendee is not in your contacts list, tap Company Directory to view the contact information. 7.4 Finding Contacts in the Company Directory In addition to having contacts on your device, you can access contact information from your organization’s Company Directory.
Working With Company E-mails and Meeting Appointments 145 • When creating a meeting request and selecting required and optional attendees in Calendar, tap Company Directory. 3. Enter a partial or full contact name and tap Search. In the search results list, tap a contact to select it. Notes • You can save a contact from the Company Directory to your device by selecting the contact, then tapping Menu > Save to Contacts.
Working With Company E-mails and Meeting Appointments
Chapter 8 Internet 8.1 Ways of Connecting to the Internet 8.2 Starting a Data Connection 8.3 Using Opera Mobile™ 8.4 Using YouTube™ 8.5 Using Streaming Media 8.6 Using Windows Live™ 8.7 Using Your Device as a Modem (Internet Sharing) 8.
Internet 8.1 Ways of Connecting to the Internet Your device’s networking capabilities allow you to access the Internet or your corporate network at work through one of the following connections: • Wi-Fi • 3G, GPRS, or EDGE • Dial-up Note You can also add and set up the following connections: • VPN: A VPN connection is used to access your corporate network by using an existing Internet connection.
Internet 149 1. The network names of the detected wireless networks are displayed on a pop-up message window. Tap the desired wireless network, then tap OK. Note When you select an open (unsecured) network, you will be automatically connected to the network after tapping OK. You do not need to do steps 2 and 3. 2. On the next pop-up message window, do one of the following: • Tap The Internet if the wireless network connects your device to the Internet.
Internet To check wireless network status You can check the current wireless connection status from any of the following screens of your device: • Title bar. When you enable Wi-Fi on your device, the Wi-Fi ON icon title bar. appears on the After Wi-Fi is turned on, your device scans for available wireless networks and the wireless signal icon appears on the title bar. The arrows in this icon move back and forth while your device is scanning for a wireless network signal.
Internet 151 • Configure Wireless Networks screen. On the Home screen, slide to the Settings tab and then tap All Settings. In the Connections tab, tap Wi-Fi. This screen displays the wireless networks currently available. To connect to a wireless network in the list, tap and hold on the desired network, then tap Connect. Tap a wireless network in the list to view or change its connection settings. You can also add new wireless networks, if available, by tapping Add New.
Internet GPRS/3G Use GPRS/3G (or EDGE, if available) to connect to the Internet and to send and receive e-mail and picture messages on your device. You will need a data plan to use your wireless service provider’s GPRS/3G network. Check with your wireless service provider to find out about GPRS/3G rates.
Internet 153 4. On the Make New Connection screen, enter a name for the connection. 5. In the Select a modem list, select Cellular Line (GPRS , 3G), then tap Next. 6. Enter the Access point name, then tap Next. 7. Enter the user name and password, if required, then tap Finish. Notes • To view help information for any screen, tap the help icon ( ). • To modify your connection settings, tap Manage existing connections and then tap Edit.
Internet 5. Enter the ISP server phone number, then tap Next. 6. Enter your user name, password, and any other information required by your ISP, then tap Finish. 8.2 Starting a Data Connection After setting up a data connection such as GPRS/3G or ISP dial-up on your device, you can now connect your device to the Internet. The connection is started automatically when you begin using a program that accesses the Internet such as Opera Mobile. To manually connect or disconnect a data connection 1.
Internet 155 8.3 Using Opera Mobile™ Opera Mobile™ is a full-featured Internet browser, optimized for use on your device. Note You can also use Internet Explorer® Mobile to browse the web. To open Internet Explorer Mobile, tap Start > Internet Explorer. 1 8 2 3 4 5 6 7 9 1 Refresh. Tap to reload the web page being viewed. 2 Address bar. Enter the URL of the web site here. 3 Back. Tap to go back to the previous web page viewed. 4 Bookmarks.
Internet 7 Menu. Tap to open a list where you can change Opera Mobile settings, check downloads, view History, and more. 8 Close tab. Tap to close the current tab. This is only enabled if you have more than one tab opened. 9 Exit Full Screen mode. When browsing the web, Opera Mobile automatically switches to Full screen mode. Tap to show the address and Menu bars again.
Internet 157 View web pages While browsing web pages, use finger gestures to pan and zoom on the web page. Tip Touch and hold an empty area on a web page to open a shortcut menu that lets you go back to the previous page, reload the page, add the page as a Bookmark, and more. You can also tap and hold a link or image on a web page to open a menu with different options.
Internet Opera Mobile menu On the menu bar, tap to open the menu. Tap to open the Settings screen where you can set the default home page, change display settings, set privacy settings, and more. Tap to view items being downloaded. You can also resume or stop current downloads. Tap to view information about the Web page you are browsing. Tap to see web pages that you have viewed. Tap to manage and view web pages that you have saved. Tap to open the Opera Mobile help file.
Internet 159 8.4 Using YouTube™ YouTube™ lets you browse, search, and watch video clips from the YouTube server. Note You need an active connection to use YouTube. If you are using a GPRS/3G connection, your data connection bill may increase significantly due to large file sizes of the videos. To open YouTube Tap Start > Programs > YouTube. Tap to open the Program Displays the current program Guide list. The Program channel being viewed.
Internet To add a new program channel into the Program Guide list 1. On the YouTube screen, tap . 2. On the Search screen, enter the channel you want to add to the Program Guide list. 3. Tap Search. YouTube searches for the channel and then displays the available videos from it. 4. Tap and then on the confirmation screen, tap OK. The channel you just subscribed to will now be shown when you tap Program Guide. Tip You can also add a YouTube user as a program channel.
Internet 161 Watching videos On the Videos, Bookmarks, or History screen, tap a video to launch the YouTube Video Player and use the on-screen buttons to control the playback. Note The YouTube Video Player always displays video in landscape orientation. Drag to go forward or backward in the video. Download progress Buffered video Tap to go back to the beginning of the video. Tap to toggle between playing and pausing the video. Tap to stop the video playback.
Internet When you tap Stop ( ) or finish watching the entire video, you are presented with options on what you can do next. Tap to go to the next page of related videos. If no action is taken, it automatically goes to the next page after 10 seconds. Tap to view details about the video you just watched. Tap to go back to the previous page of related videos. Tap to send the link to the video you just watched to another person using one of the Messaging accounts. Tap to add the video to your Bookmarks.
Internet 163 To delete a video from Bookmarks 1. On the Bookmarks screen, tap Edit. 2. Tap on the video you want to remove from Bookmarks. 3. On the confirmation screen, tap Yes. 4. Tap Done. History View recently watched videos on the History screen. To view History On the YouTube screen, tap Note . Tap a video to watch it. To clear the History list, tap Clear.
Internet 8.5 Using Streaming Media Streaming Media lets you stream live broadcasts or on-demand media content from the web. The media is sent in a continuous stream to your device and is played as it arrives, along with the audio. The Streaming Media program allows you to play 3GP and MPEG-4 files. It also supports playback of SDP (Session Description Protocol) files.
Internet 165 To stream media files directly on the Streaming Media Player Streaming Media only supports RTSP links when you stream *.3gp and *.mp4 files directly on the program. Note Before you launch the Streaming Media program, make sure that you are connected to the Internet. 1. Tap Start > Programs > Streaming Media. 2. From the program, tap Connect. 3. Enter the URL for the web site (rtsp://) and the file name. 4. Tap Connect. 5. Streaming Media then starts playing the file.
Internet 8.6 Using Windows Live™ Windows Live™ gives you a full Internet experience on your device. Windows Live™ helps you to find information, pursue your interests, and get in touch with friends and family on the Internet easier. Windows Live™ offers the following key features: • Live Search Bar, which lets you search for information on the web. • Live Messenger, the next generation of MSN Messenger Mobile. • Live Mail, the next generation of Hotmail.
Internet 167 If you select Store Windows Live contacts in your mobile phone’s contact list, your Windows Live™ contacts will be added to the contact list and to Windows Live™ Messenger on your device. If you select Sync e-mail, your Windows Live™ Mail or Hotmail inbox messages will be downloaded to your device. 6. Tap Next. 7. After synchronization is complete, tap Done.
Internet Windows Live™ Messenger With this mobile version of Windows Live™ Messenger, you enjoy many of the same cool features that you get from the desktop version, which include the following: • • • • • • • • Note Instant messaging via text and voice Multiple conversations Insert emoticons Contact list with presence Send and receive files including photos Change status/display name View contacts by online status, groups, and more Send messages even when a contact is offline Before you can use Wind
Internet 169 To sign in and out 1. Tap Sign in on the Messenger screen. 2. If this is your first time to sign in, a message appears to inform you that your messenger contacts will be added to the contact list on your device. Tap OK to add them. Signing in may take several minutes, depending on your connection speed. 3. To sign out, tap Menu > Sign Out. To start and end conversations 1. In the contact list, select a contact, then tap Send IM to open a message screen. 2.
Internet Add Windows Live™ contacts You can add new Windows Live™ contacts in Windows Live™ Messenger or in Contacts. To add a Windows Live™ contact in Live Messenger 1. Tap Menu > Add new contact. 2. Enter the e-mail address of the contact, then tap OK. To add a Windows Live™ contact in Contacts 1. On the Home screen, slide to the People tab and then tap All People. 2. Tap New, then tap Windows Live. 3.
Internet 171 8.7 Using Your Device as a Modem (Internet Sharing) Internet Sharing connects your desktop or notebook computer to the Internet by using your device’s data connection (GPRS or EDGE, for instance). You can choose to connect via USB or Bluetooth. Notes • Make sure your device has a SIM card installed, and your device has a GPRS/3G or phone dial-up modem connection. If your device has not been set up with a data connection yet, tap Menu > Connection Settings on the Internet Sharing screen.
Internet To use your device as a Bluetooth modem For the computer to use the Internet connection of your device, activate Internet Sharing on your device, then set up a Bluetooth Personal Area Network (PAN) between the computer and your device. 1. On your device, turn on Bluetooth and set it to visible mode by following the steps in “To turn Bluetooth on and make your device visible” section in Chapter 9. 2.
Internet 173 c. Under Network Tasks, click View Bluetooth network devices. d. In the Bluetooth Personal Area Network Devices dialog box, select your device, then click Connect. Note If the Bluetooth adapter or dongle on your computer was installed using a thirdparty provided driver, open the Bluetooth software that came with the Bluetooth adapter/dongle to connect your computer and device via Bluetooth. Refer to the Bluetooth adapter/dongle documentation for more information. 8.
Internet 8.8 Using RSS Hub RSS Hub is an RSS reader that keeps you up-to-date with the latest news from the Internet. It monitors Internet news channels and downloads the most current news updates and podcasts so you are instantly informed of breaking news and events. For more information and tips on using RSS Hub, see Help on your device. Note Make sure you have an active Internet connection (such as EDGE or GPRS) before using RSS Hub.
Internet 175 Note If the RSS channel you want to subscribe to is not in the list of known channels, tap Back, then select another option on the New Channel Wizard screen. For more information on these other options, see the Help on your device. 3. Select the check boxes of the RSS channels you want to subscribe to, then tap Finish. Tip Channels are grouped by categories. If you want to select all channels in a category, select the category check box. 4. The channel list appears.
Internet To add new channels 1. In the channel list, tap Menu > Channel > New to open the New Channel Wizard screen. 2. Select an option, then follow screen instructions to add new channels. For more information on New Channel Wizard options, see Help on your device. To filter the channels in the display In the channel list, tap Menu > View, then select: • Updated to display only those channels with unread headlines. • All to display all subscribed channels.
Internet 177 View and organize headlines Tap a channel in the channel list to display the headlines for that channel. Headline or news summary contains a keyword Headline has been read New or unread headline Tap to return to the channel list Tap a headline to open the news summary screen Audio/Video/Image file attachment is downloading Tap to download audio/ video file attachment New or unread headlines display in bold and are marked with a blue newspaper icon.
Internet View the news summary Tap a headline in the headline list to display the news summary. Channel name Headline and read status Audio/Video/Image file attachment. Tap to download the file. News summary Tap to open the news item in Opera Mobile. See “Using Opera Mobile” in this chapter for details.
Internet 179 To download, play, or save podcasts 1. When you see an audio or video file attachment in the news summary, do one of the following to download the file: • Tap Menu > Podcasts > Start Download. • Tap the Download audio/Download video link below the audio/video file icon. Tip To cancel the file download, tap Menu > Podcasts > Cancel Download, or tap Cancel download below the audio/video file icon. 2.
Internet To view the next or previous news summary In the news summary screen, tap Menu > Next or Menu > Previous, or press NAVIGATION left or right. For more information about the features and configuring RSS Hub, refer to the online help. To open the online help, tap Start > Help while in RSS Hub.
Chapter 9 Bluetooth 9.1 Bluetooth Modes 9.2 Bluetooth Partnerships 9.3 Connecting a Bluetooth Hands-free or Stereo Headset 9.4 Set up the default Bluetooth device to connect with 9.5 Beaming Information Using Bluetooth 9.6 Bluetooth Explorer and Bluetooth File Sharing 9.
Bluetooth 9.1 Bluetooth Modes Bluetooth is a short-range wireless communications technology. Devices with Bluetooth capabilities can exchange information over a distance of about eight meters (26 feet) without requiring a physical connection. Bluetooth on your device operates in three different modes: • On. Bluetooth is turned on. Your device can detect other Bluetooth-enabled devices, but not vice versa. • Visible. Bluetooth is turned on, and all other Bluetooth-enabled devices can detect your device.
Bluetooth 183 9.2 Bluetooth Partnerships A Bluetooth partnership is a relationship that you create between your device and another Bluetooth-enabled device in order to exchange information in a secure manner. To create a Bluetooth partnership 1. On the Home screen, slide to the Settings tab and then tap Menu > Bluetooth Devices > Devices tab. 2. Tap Add new device. Your device displays the names of other Bluetooth devices within range. 3. Tap the device name in the box, then tap Next. 4.
Bluetooth To accept a Bluetooth partnership 1. Ensure that Bluetooth is turned on and in visible mode. 2. Tap Yes when prompted to establish a partnership with the other device. 3. Enter a passcode (the same passcode that is entered on the device requesting the partnership) to establish a secure connection. The passcode must be between 1 and 16 characters. 4. Tap Next. 5. Tap Done. You can now exchange information with the paired device.
Bluetooth 185 3. Tap the name of the Bluetooth headset, then tap Next. The device will automatically pair the device with the Bluetooth headset. Windows Mobile will automatically try one of the preconfigured passcodes (0000, 1111, 8888, 1234) to pair the Bluetooth headset with the device. If this fails, you have to enter the passcode delivered with your headset manually. Note If the Bluetooth stereo headset becomes disconnected, turn the headset on and repeat step 1 to 2 above.
Bluetooth 9.5 Beaming Information Using Bluetooth You can beam information, such as contacts, calendar items, tasks, and files from your device to your computer or to another Bluetooth-enabled device. Note If your computer does not have built-in Bluetooth capability, you need to connect and use a Bluetooth adapter or dongle on your computer. To beam information from your device to a computer 1. Turn on Bluetooth on your device, and make your device visible.
Bluetooth 187 e. To enable your computer to receive Bluetooth beams, right-click the Bluetooth icon in the notification area at the bottom-right corner of your computer screen and select Receive a File. You are now ready to beam. 3. On your device, select an item to beam. The item can be an appointment in your calendar, a task, a contact card, or a file. 4. To beam a contact, tap Menu > Send Contact > Beam. To beam other types of information, tap Menu > Beam [type of item]. 5.
Bluetooth To enable Bluetooth Explorer and Bluetooth file sharing on your device 1. On the Home screen, slide to the Settings tab and then tap Menu > Bluetooth Devices > FTP tab. 2. Select the Enable Bluetooth Explorer check box. This makes the Bluetooth device folder visible in File Explorer. 3. Select the Enable File Sharing check box. You can use the default Bluetooth shared folder, or tap Browse to use another folder as your shared folder. 4. Tap OK. To use Bluetooth Explorer 1.
Bluetooth 189 4. Tap Up twice. 5. Navigate to the folder where you want to paste the files on your device, then tap Menu > Edit > Paste. 9.7 Printing Files via Bluetooth Connect your device to a Bluetooth printer to print contact information, appointment details, images, and other file types. Note You can print files in the .txt, .jpg, .xhtml, .vcf, .vcs file formats. Before you start printing, make sure to turn on the Bluetooth printer and to turn on Bluetooth on your device.
Bluetooth To print a JPEG file 1. In Pictures & Videos, locate the JPEG file you want to print. 2. Tap and hold the JPEG image file and then on the menu, tap Print via Bluetooth. 3. Follow steps 3 to 5 in the “To print contact information” procedure: To print a text file 1. In File Explorer, locate the text file you want to print. 2. Tap and hold the txt file and then on the menu, tap Print via Bluetooth. 3.
Chapter 10 Finding and Recording Places 10.1 Guidelines and Preparation for Using GPS 10.2 Downloading Satellite Data via QuickGPS 10.3 HTC Footprints™ 10.4 Google™ Maps (Available by Country) 10.5 Using TomTom® NAVIGATOR 10.6 Location Settings 10.
Finding and Recording Places 10.1 Guidelines and Preparation for Using GPS Please follow these guidelines when using GPS on your device: • When using GPS navigation software in the car, always plot your GPS route before starting to drive. Do not try to configure the GPS navigation software while driving. • The plotted GPS route is only for driving reference. It should not interfere with actual driving behavior.
Finding and Recording Places 193 • Please use the GPS system cautiously. Users shall be liable for any damages resulting from negligent operation of the system. • The GPS signal cannot pass through solid non-transparent objects. Signal reception may be affected by obstructions such as high-rise buildings, tunnels, bridges, forests, weather (rainy or cloudy days), etc. If the vehicle’s visor contains metal, it will be difficult for the GPS signal to pass through.
Finding and Recording Places To download data Tap Download on the QuickGPS screen. On the screen, initially, you will see the Valid time of the downloaded data. As time passes, the remaining days and hours of validity will be shown. To speed up GPS positioning, download the latest ephemeris data when the validity of the data expires. You can improve GPS performance even more by downloading data more frequently.
Finding and Recording Places 195 10.3 HTC Footprints™ HTC Footprints™ provides an easy way to take photos, record and share information of places you visit. After you take a photo of your current location, Footprints uses GPS to record your exact position and allows you to add more location information such as the street address, phone number and more. You can also share the photo and the location information with friends by sending via SMS or e-mail.
Finding and Recording Places 2. To take a photo of your current location, press the ENTER button. Once you have taken a photo, Footprints uses GPS to search for your position. This information is stored with the photo. The photo you took is then displayed. Tip To change brightness and white balance settings before you take a photo, tap Menu > Brightness or White Balance, and choose a setting. GPS status indicator.
Finding and Recording Places 197 To select a photo from Album and add location information 1. On the Home screen, slide to the Photos and Videos tab and tap Album. Select the photo you want to add and tap Menu > Save to Footprints. 2. To add location information, follow steps 3 or 4 above. Find a previously visited place Photos with location information are organized in categories so that you can find the place you want quickly.
Finding and Recording Places 4. To call a phone number, if specified, touch . 5. To launch the GPS navigation software if there is a displayed GPS position, touch . Note To navigate to the location in the GPS navigation software, you must have the appropriate map for that location. 6. To view the location in Google Maps if there is a displayed GPS position, touch . 7. To play a voice recording, if included, touch Tips . • To edit the location information, tap Menu > Edit.
Finding and Recording Places 199 5. To delete an existing voice recording, tap . To make a voice recording if there was no recording before, or to replace an existing recording, tap . To listen to the recording, tap . 6. Tap the fields to the right of the and street address respectively. and 7. To add description of the location, tap the icons to enter the phone number field and enter the text. 8. To change the category your entry is stored in, tap a category icon at the bottom of the screen.
Finding and Recording Places 10.4 Google™ Maps (Available by Country) Google™ Maps lets you track your current location, view real-time traffic situations, and receive detailed directions to your destination. It also allows you to search and locate places of interest or even a contact address. Note You need an active data connection or Wi-Fi connection to use Google Maps. To launch Google Maps Tap Start > Programs > Google Maps.
Finding and Recording Places 201 Search for a place of interest You can easily search and locate a place of interest such as hotels, restaurants, and other places using Google Maps. Google Maps can also show details on how to contact and reach the place of interest from your current location. Note You can also enter keywords, street addresses, or postal codes when searching places using Google Maps. 1. On the Google Maps screen, tap Search. 2.
Finding and Recording Places 4. On the Address tab, you can: • Tap the web address to go to the web site of the place of interest. Note This information only appears when the web site of the place of interest is available. • Tap the [phone number] to call the place of interest that you have selected. • Tap Directions to here or Directions from here to get directions on how to get to the place of interest from your current location or vice versa.
Finding and Recording Places 203 To open TomTom NAVIGATOR Tap Start > Programs > TomTom NAVIGATOR. First-time use The first time you use TomTom NAVIGATOR, a Setup Wizard opens and asks you a few questions to set up TomTom NAVIGATOR. Answer each question by tapping your desired answer on the screen. The first time you use TomTom NAVIGATOR, it opens the web browser and allows you to download a map of your choice for free. After the download is completed, the map is automatically added to TomTom NAVIGATOR.
Finding and Recording Places Driving View After you have completed the Setup Wizard, NAVIGATOR displays the Driving View. The Driving View is shown in black and white until your device’s GPS receiver locates your current position. Once your current position is determined, the Driving View is shown in full color and shows your position on the map. 1 Tap to zoom in on your current position. 1 2 Tap to zoom out on your current position. 3 Indicates your current position.
Finding and Recording Places 205 You will find the following items on the Main Menu: • Navigate to. Lets you select a destination. • Find alternative. Calculates an alternative route if you want to avoid traffic or other nuisances. • Help me! Provides you with help options that can provide you with directions on how to get to the nearest emergency or assistance service centers and contact them by phone. • TomTom Traffic. Enables and disables reception of traffic information.
Finding and Recording Places • View route. Shows your route in detail. • Exit application. Stops GPS navigation and closes TomTom NAVIGATOR. Select a destination When you tap Navigate to on the Main Menu, you are given several options to set your destination. Tap the Next icon ( ) to browse through the various types of destinations. Some of the common destinations you may want to go to include the following: • Home. Your Home location.
Finding and Recording Places 207 • TomTom Buddy. If you have TomTom Buddies, you can use this to add your Buddy as a point of interest. TomTom Buddies are available through TomTom services. • Picture. The geotagged position from a GPS photo that you captured with the Camera or copied to your device or storage card. After you have set your destination, NAVIGATOR asks you whether you need to arrive at a particular time.
Finding and Recording Places Favorites Favorites are places that you often visit. You can create favorites so that you do not have to specify the address every time you need to go there. To create a favorite 1. Tap the Driving View screen to open the Main Menu. 2. Tap Add Favorite. 3. You can select Home, Address, Recent destination, or Point of Interest as a favorite, or tap the Next icon ( ) to choose other location options. 4. Use the default name or enter a name for the favorite. Tap OK.
Finding and Recording Places 209 Points Of Interest (POI) Points of Interest (POIs) are useful places, such as gas/petrol stations, restaurants, hotels, parking garages, and more. NAVIGATOR groups points of interest into locations and categories. When you select a destination or create a favorite, you are always prompted to select a location and category first, and then choose a point of interest.
Finding and Recording Places select a marker for your POI category. (This marker will be shown on a map when you enable POIs to be displayed on the map.) 5. Tap Add POI. 6. Tap the category you want to add the POI to. 7. Select the location of your POI the same way as you choose a destination, for example, choose Home, Address, etc. Tip You can customize NAVIGATOR to alert you with a notification sound when you are near a point of interest.
Finding and Recording Places 211 4. Set the destination for your journey. 5. Choose the type of route that should be planned, such as: • Fastest route. Route which takes the least time. • Shortest route. Shortest distance between the locations you have set (but this may not be the quickest route, depending on where you pass through and on the road conditions). 6. Tap Done. NAVIGATOR then plans the route and displays the Route Summary screen.
Finding and Recording Places 1 7 1 This Scale Bar shows the distance range shown on the map based on the current zoom scale. 2 This is your current position on the map. Tap another location to move to a different part of the map. 2 6 3 Tap to choose what items to show on the map, such as points of interest, favorites, street names, and more. 4 Tap to find specific addresses and points of interest on the map. 3 4 5 5 This is the Cursor button.
Finding and Recording Places 213 Preferences You can change the way TomTom NAVIGATOR looks and behaves. Tap Change preferences on the Main Menu to access and adjust the settings. The following are some of the settings that you may want to customize for NAVIGATOR: Use night colors Reduce the brightness of the screen and use darker colors on the map. Use this setting when you are in a dark environment. To change back to brighter colors, tap Use day colors.
Finding and Recording Places Compass preferences Select how you want to display the compass. You can also choose not to show the compass. Change map colors Sets the color schemes used for day and night map colors. Start-up preferences Select which screen to show when you open NAVIGATOR. Status bar preferences Select the information to show on the Status Bar in the Driving View screen. Automatic zooming Enable or disable automatic zooming in Driving View.
Finding and Recording Places 215 Hide tips/Show tips Tap to toggle between hiding and displaying tips. Reset factory settings Tap to reset TomTom NAVIGATOR settings to the factory defaults. All settings, including Favorites, Home location, etc, will be deleted. 10.6 Location Settings You can change what location data is sent and received on your device. Do one of the following: • On the Home screen, slide to the Settings tab, and tap Location. • Tap Start > Settings > System tab > Location Settings.
Finding and Recording Places Location service Your device provides access to a network location service, allowing programs to determine your approximate location using cell towers or Wi-Fi hotspots. When you launch certain programs that can use this service, you are asked whether you want to use the service. You are also asked whether to improve the service by allowing location data to be collected at any time when the device is in use.
Finding and Recording Places 217 Notes • You can use other programs on your device while it is in the holder. While on another program screen, press the FOOTPRINTS button to return to the NaviPanel. • When your device is in the holder but is not connected to a Bluetooth headset or car kit phone, the device’s speakerphone is automatically turned on when you make or answer a phone call. To turn the speakerphone off during a call, see “Call Functions” in Chapter 2.
Finding and Recording Places
Chapter 11 Experiencing Multimedia 11.1 Taking Photos and Videos 11.2 Viewing Photos and Videos Using Album 11.3 Using Windows Media® Player Mobile 11.4 Using Audio Manager 11.
Experiencing Multimedia 11.1 Taking Photos and Videos Use Camera to take photos and record video clips. To open the Camera screen 1. On the Home screen, slide to the Photos and Videos tab. 2. Tap the Camera icon ( ) or the Video Camera icon ( ). The screen orientation automatically switches to landscape mode when you open Camera. Tip You can also tap Start > Programs > Camera to open the Camera program.
Experiencing Multimedia 221 Current capture mode You can select from the following capture modes: Icon Capture Mode Photo Captures standard still images. Video Captures video clips, with or without accompanying audio. Panorama Captures a sequence of still images continuously in one direction, and stitches the images together to create a panoramic view of a scene. MMS Video Captures video clips suitable for sending with MMS messages.
Experiencing Multimedia Picture Theme Captures still images and places them within frames. GPS Photo Captures still images and uses GPS to tag them with your geographical location. When you tap this, the device searches for your GPS position. If this is not found, the device returns to Photo mode. (For information about ensuring GPS reception, see “Guidelines and Preparation for Using GPS” in Chapter 10.
Experiencing Multimedia 223 On-screen controls and indicators Tap the screen to display the controls and indicators. Photo, Video, MMS Video, Contacts Picture, and GPS Photo modes 6 5 7 When capturing in Video and MMS Video modes 8 1 2 3 1 Zoom control. Tap Tip 4 to zoom in, or to zoom out. You can also rotate the NAVIGATION WHEEL or press NAVIGATION up/down (Landscape orientation) to zoom in or out. 2 Album. Tap to open Album. See “Viewing Photos and Videos Using Album” for details.
Experiencing Multimedia 6 Remaining information indicator. In Photo, Contacts Picture, Picture Theme, and Panorama modes, this shows the remaining/available shots of pictures based on the current settings. In Video and MMS Video modes, this shows the remaining duration that can be recorded. While recording video, this shows the recorded duration. 7 GPS icon. In GPS Photo mode, when your location has been found, displayed. When your location has not been found, is displayed. 8 Recording indicator.
Experiencing Multimedia 225 Menu Panel The Menu Panel provides a quick way of adjusting the most common camera settings and lets you access more advanced camera settings. On the Camera screen, tap to open the Menu Panel. To adjust a setting, keep tapping a button on the panel, for instance, White Balance, to cycle through the available settings. To access advanced options, tap . Note The available settings on the panel depend on the selected capture mode. 6 1 5 2 4 3 1 Resolution.
Experiencing Multimedia 5 Brightness. Tap to open the Brightness bar at the bottom of the screen. On the Brightness bar, tap to decrease, or to increase the brightness level. Tap outside the Brightness bar to apply the change. 6 White Balance. White balance enables the camera to capture colors more accurately by adjusting to different lighting conditions. White balance settings include: Auto ( ), Daylight ( ), Night ( ), Incandescent ( ), and Fluorescent ( ).
Experiencing Multimedia 227 Capture mode Photo, GPS Photo Video Panorama MMS Video Contacts Picture Picture Theme Resolution Zoom range 3M (2048 x 1536) 1.0x to 2.0x 2M (1600 x 1200) 1.0x to 2.0x 1M (1280 x 960) 1.0x to 2.0x Large (640 x 480) 1.0x to 2.0x Medium (320 x 240) 1.0x to 4.
Experiencing Multimedia The Review screen After capturing, the Review screen lets you view, send, or delete the photo or video clip by tapping an icon at the bottom of the screen. Review screen icons Icon Function Back Return to the live Camera screen. Delete Delete the captured image or video. View View the captured image in the Album program. Play Play back the captured video or MMS video in the Album program.
Experiencing Multimedia 229 Advanced Options The Advanced Options let you adjust options for your selected capture mode and set Camera program preferences. Access the Advanced Options by tapping Advanced on the Menu Panel. You can either tap on-screen or press NAVIGATION up/down (Landscape orientation) to navigate through the Advanced Options screen. Tap an item to change the setting. Tap to go through the different Advanced Camera Settings screens. Tap to go back to the Camera screen.
Experiencing Multimedia • Time Stamp (Photo and GPS Photo mode). Choose whether to include the shooting date and time on captured photos. • Keep Backlight. Turn the backlight on or off. This overrides your device backlight settings while you are using the camera. • Shutter Sound. Choose whether you want the camera to make a shutter sound when you press the ENTER button. • Image Properties. This option lets you adjust the image Contrast, Saturation, and Sharpness. 1 1 Tap a property to adjust.
Experiencing Multimedia 231 IMAGnnnn.jpg (where ‘nnnn’ is the counter) which is the DCIM (Digital Camera Images) naming standard, and will be saved to the \DCIM\100MEDIA folder on the storage card. • Counter. To reset the file naming counter back to 1, tap Reset. • Flicker Adjustment. When taking indoor shots, flicker on the camera screen may be caused by inconsistencies between the vertical scan rate of the camera display and the flicker frequency of fluorescent lighting.
Experiencing Multimedia • Template Folder (Picture Theme mode). By default, templates are stored in the \My Documents\Templates folder on the device’s Main Memory. If you transferred some templates to a storage card (via File Explorer), set this option to Main + Card to specify that templates are located in both the main memory and the storage card. • Show Reminder (Contacts Picture mode).
Experiencing Multimedia 233 Launch Album Do one of the following: • On the Home screen, slide to the Photos and Videos tab and tap Album. • In the Camera program, tap • Tap Start > Programs > Album. Note . Album is always displayed in landscape mode. Tap to open the Camera program. Select a photo or video to view 1. On the main Album screen, tap Albums and then select the album to view. The contents of the album are then displayed on the main Album screen. 2.
Experiencing Multimedia View an image While viewing an image in full screen, tap the screen or press ENTER to open the on-screen menu. Tap to send the image using one of the Messaging accounts. Tap to start the slideshow. Tap to go back to the main Album screen, Photos and Videos tab, or Camera. Tip Tap to open a menu where you can save the screen image as a photo for a contact, save the current image as a new file, delete the image, and view file properties.
Experiencing Multimedia 235 To view the next or previous image When viewing images in full screen, go to the next image by swiping your finger across the screen from right to left. Go back to the previous image by swiping your finger from left to right. To zoom in or out of an image While viewing an image, make a full-circle gesture on the screen with your finger. Slide your finger clockwise on an area to zoom in on that area. Slide your finger counterclockwise to zoom out.
Experiencing Multimedia Tips • You can also zoom in and out by rotating the NAVIGATION WHEEL. • When you zoom in on an image, double-tap the screen to automatically zoom out and fit the image to the screen. • When you zoom in on an image, tap and hold the screen so you can pan the image. • When you zoom in on an image, tap the screen to open the on-screen menu. On the on-screen menu, tap and then select Save Screen Image to save the image on-screen as a new file.
Experiencing Multimedia 237 Play back video While playing back video, tap the screen to show the playback controls. Drag to go forward or backward in the video. Elapsed time Total duration Tap to go back to the beginning of the video. Tap to stop video playback. Tap to play or pause video playback. Tip If the video is in your favorite album, you can start the video playback from the Photos and Videos tab on the Home screen. On the Photos and Video tab, tap Play.
Experiencing Multimedia 11.3 Using Windows Media® Player Mobile Windows Media® Player Mobile plays digital audio and video files that are stored on your device or on a network, such as on a web site. Video File Formats Supported Windows Media Video MPEG4 Simple Profile H.263 H.264 Motion JPEG File Extensions .wmv, .asf .mp4 .3gp, .3g2 .mp4, .3gp, .3g2, .m4v .
Experiencing Multimedia 239 About the controls Tap and drag to jump to any part of the video or audio Mute/Unmute Full screen Increase volume Visit WindowsMedia.com Decrease volume Skip to the beginning of Skip to the next file the current file or to the Play/Pause previous file About the screens and menus Windows Media® Player Mobile has three primary screens: • Playback screen. The screen that displays the playback controls (such as Play, Pause, Next, Previous, and Volume) and the video window.
Experiencing Multimedia At the bottom of each screen, you can open a Menu. The commands on this menu vary, depending on which screen you are viewing. For more information about the commands in these menus, see Help on your device. Synchronize video and audio files Use the latest version of Windows Media® Player on your computer to synchronize digital media files from your computer to your device. This ensures that protected files and album art (for skins) are copied to your device correctly.
Experiencing Multimedia 241 The files will begin synchronizing to your device. The next time you connect your device to your computer while Windows Media® Player is running, synchronization will start automatically. To synchronize content manually to your device 1. If you have not set up media synchronization between your device and computer, follow steps 1 to 3 in “To synchronize content to your device automatically”. 2. Click the Sync tab on the Windows Media® Player of your computer.
Experiencing Multimedia Notes • Use Windows Media® Player 11 or higher on your computer to synchronize media files to your device. • Audio files copy faster if Windows Media® Player is configured to automatically set the quality level for audio files copied to your device. For more information, see the Windows Media® Player Help. Play media Use the Library to find and play songs, videos, and playlists that are stored on your device or an installed storage card. To update the Library 1.
Experiencing Multimedia 243 Playlists In Windows Media® Player Mobile, you can create a new playlist by saving the current Now Playing playlist and giving it a new name. To save a new playlist 1. If you are not on the Library screen, tap Menu > Library. 2. Tap to select a category (for example, My Music or My Playlists). 3. Select a media file that you want, then tap Menu > Queue Up. This adds the file to the Now Playing list.
Experiencing Multimedia 11.4 Using Audio Manager In Audio Manager, you can access all the music files on your device. You can browse categories such as Artists, Genre, and more, and play them on the Music tab of the Home screen (see Chapter 3 for more information on playing music). You can create your own playlists. You can also set whole songs or parts of songs as ringtones.
Experiencing Multimedia 245 Audio Manager: Main screen Audio Manager: Artists screen Music files that are protected by Digital Rights Management (DRM) are listed under the Protected category. A lock icon shown before song titles indicates that the music files are protected. Select a file and tap Info if you want to view file information. A cross-marked lock icon shown before song titles indicates that the rights for the music files have expired, and you are not able to play them.
Experiencing Multimedia To create a playlist 1. On the Main screen, tap Playlists. 2. On the Playlists screen, tap Menu > New. 3. Enter a Playlist name and tap OK. 4. On the Playlists screen, tap the playlist you have just created and tap Menu > Edit. 5. Tap Menu > Add. 6. Tap the check boxes to select the songs you want to add to the playlist, or tap Menu > Select All to choose all the songs. 7. Tap OK three times to return to the Playlists screen. To play back a playlist 1.
Experiencing Multimedia 247 Mark the part of the music that will be used as the ring tone. Drag the left handle to mark the start time, then drag the right handle to mark the end time. Play/Stop For more precise marking, you can also tap these controls to step backward/forward one step and mark it. Confirm trimming the ring tone. Cancel trimming. 3. Tap Set as Default Ring Tone. Tip If you only want to save the song to the ring tone folder for future use, tap Save to Ring Tone Folder.
Experiencing Multimedia 11.5 Using Audio Booster Audio Booster optimizes sound for a better listening experience. It provides preset moods, such as hip hop, jazz, rock, etc., and several enhancement presets that suit different types of music. To access Audio Booster Tap Start > Programs > Audio Booster. 1 2 This control Does this 1 On Select the check box to enable or disable the equalizer. 2 Equalizer presets Tap to choose the Equalizer preset to use.
Experiencing Multimedia 249 To create a custom equalizer preset 1. Adjust the frequency bands to your desired values by dragging the equalizer controls. The selected values are indicated on top of the sliders. 2. Save your equalizer settings as a preset by tapping Menu > Save as Preset. 3. Enter a preset name and then tap Done. The preset you created is added to the list box. To delete a custom equalizer preset 1. Tap the list box and select the Equalizer preset you want to delete. 2.
Experiencing Multimedia
Chapter 12 Programs 12.1 Accessing Programs on Your Device 12.2 Adding and Removing Programs 12.3 Adobe® Reader® LE 12.4 Calendar 12.5 Contacts 12.6 Comm Manager 12.7 Microsoft® Office Mobile 12.8 Notes 12.9 Java 12.10 SIM Manager 12.11 Tasks 12.12 Voice Recorder 12.13 Voice Speed Dial 12.
Programs 12.1 Accessing Programs on Your Device You will find preinstalled programs in the Start menu and on the Programs screen of your device. To launch and use a program Do one of the following: • Tap Start to open the Start menu and then tap a desired program. • To access more programs, tap Start > Programs, or slide to the Programs tab on the Home screen and then tap All Programs. 12.
Programs 253 To uninstall a program 1. Tap Start > Settings > System tab > Remove Programs. 2. In the Programs in storage memory list, select the program you want to remove, then tap Remove. 12.3 Adobe® Reader® LE Adobe® Reader® LE is an application for viewing PDF (Portable Document Format) documents on your device. It supports a subset of the features found in the PC versions of Adobe Reader. To open Adobe Reader LE Tap Start > Programs > Adobe Reader LE.
Programs 12.4 Calendar Use Calendar to create appointments, including meetings and other events. You can also synchronize Calendar appointments between your device and computer. To open the Calendar screen • On the TouchFLO Home screen, tap Calendar or a displayed appointment; or • Tap Start > Calendar. Create appointments To schedule an appointment 1. Open the Calendar screen and then tap Menu > New Appointment. 2. Enter a name for the appointment. 3.
Programs 255 To set the reminder time for new appointments By default, Calendar has been set to display a reminder alert when you have new upcoming appointments. You can change the reminder time. 1. Open the Calendar screen. 2. Tap Menu > Tools > Options > Appointments tab. 3. Make sure the Set reminders for new items check box is selected. 4. Set the time when you want the reminder to alert you. 5. Tap OK to return to the Calendar screen.
Programs • To change the default view that Calendar uses to display appointments, tap Menu > Tools > Options > General tab. Tap the Start in box, then choose the calendar view. • When in Month view, you will see the following indicators: Morning appointment Afternoon or evening appointment Both morning and afternoon/evening appointments All-day event Send appointments To send a meeting request Use Calendar to schedule meetings via e-mail with contacts who use Outlook or Outlook Mobile. 1.
Programs 257 Notes • If you’re sending the meeting request using your Outlook E-mail account, it will be sent to the attendees the next time you synchronize your device with your computer or Exchange Server. • When attendees accept your meeting request, the meeting is automatically added to their schedules. When their response is sent back to you, your calendar is updated as well.
Programs To open the Contacts screen Do one of the following: • On the TouchFLO Home screen, slide to the People tab and then tap All People; or • Tap Start > Contacts. Add new contacts To add a contact on your device 1. Open the Contacts screen. 2. Tap New, select Outlook Contact, and enter the contact information. 3. In the File as field, choose how you want the contact name to appear in the contact list. 4.
Programs 259 To add a contact to your SIM card 1. Open the Contacts screen. 2. Tap New, then select SIM Contact. 3. Enter a contact name and phone number. 4. Tap OK. Tip You can also use the SIM Manager to add and edit contacts on your SIM card. For more information, see "SIM Manager" in this chapter. Organize and search contacts To group similar contacts For easier management, you can group similar contacts by assigning them to categories. 1.
Programs To find a contact on your device There are several ways to find a contact when your contact list is long: • Begin entering a contact name in the provided text box until the contact you want is displayed. • On the Quick Scroll bar on the right of the Contacts screen, scroll to or tap a letter to go directly to the part of the contacts list where contact names start with that letter.
Programs 261 Share contact information To beam a contact’s details You can quickly send contact information to another mobile phone or device through Bluetooth beaming. 1. On the Contacts screen, select a contact. 2. Tap Menu > Send Contact > Beam, then select a device where to beam the contact to. Note Before beaming, make sure Bluetooth is turned on and set to visible mode on your device and the target mobile device. You can also beam contact information to your computer. See Chapter 9 for details.
Programs 12.6 Comm Manager Comm Manager is a central location where you can easily turn on and off the communication features of your device such as the phone, Wi-Fi, data connection, Bluetooth, and more. To access the Comm Manager Do one of the following: • On the TouchFLO Home screen, slide to the Settings tab and then touch Communications. • Touch Start > Programs > Comm Manager. • Touch Start > Settings > Connections tab > Comm Manager. 1 2 3 4 5 6 1 Switch Airplane Mode on or off.
Programs 263 4 Switch Wi-Fi on or off. Tap Settings > Wireless LAN to configure wireless network connection settings. See “Wi-Fi” in Chapter 8 for details. 5 Switch between automatically receiving (as items arrive) or manually retrieving Outlook e-mails. See Chapter 7 for details. 6 Turn your data connection (such as 3G or GPRS) on or off. See “Starting a Data Connection” in Chapter 8 for details. 12.
Programs Tips • By default, Word Mobile saves documents in .docx format, while Excel Mobile saves workbooks in .xlsx format. If you want to open these types of files on a computer that uses Microsoft Office 2000, Office XP, or Office 2003, you need to download and install the File Format Converter in your computer. You can find this converter at http://www.microsoft.com/downloads/details. aspx?FamilyId=941B3470-3AE9-4AEE-8F43-C6BB74CD1466&displaylang=en. • If you want Word Mobile to save documents in .
Programs 265 3. Tap OK to save. Note To select a drawing (for example, to copy or delete it), tap and hold the drawing briefly. When you lift the stylus, the drawing is selected. To record a voice note You can create a stand-alone recording (voice note) or you can add a recording to a note. 1. Tap Start > Programs > Notes. 2. If you do not see the Recording toolbar, tap Menu > View Recording Toolbar. 3. Do one of the following: • To add a recording to a note, create or open a note.
Programs 12.9 Java MIDlets are Java applications such as games and tools that can run on mobile devices, while a MIDlet suite is a collection of one or more MIDlets. The Java program lets you download, install and manage MIDlets or MIDlet suites on your device. Your device supports Java 2 Micro Edition, J2ME. To open the Java program Tap Start > Programs > Java. Install and launch MIDlets/MIDlet suites There are several ways to install a MIDlet/MIDlet suite.
Programs 267 To run a MIDlet/MIDlet suite Do one of the following: • After installation of the MIDlet/MIDlet suite is complete, tap Yes. • On the Java screen, open the folder that contains the MIDlet/MIDlet suite. Select the MIDlet/MIDlet suite, then tap Launch. Manage MIDlets/MIDlet suites You can organize MIDlets/MIDlet suites into folders for easy identification, renaming, updating, and more. If the device memory is full, uninstall some MIDlets/ MIDlet suites to free up memory space.
Programs 12.10 SIM Manager SIM Manager allows you to view the contents of your SIM card, transfer contacts from your SIM card to your device or vice versa, and make a call to a SIM contact. To create a contact on your SIM card 1. Tap Start > Programs > SIM Manager. 2. Tap New and enter a contact name and phone number. 3. Tap Save to save the information on your SIM card. Tip To change contact information on your SIM card, tap a SIM contact, edit the information, and then tap Save.
Programs 269 1. On the SIM Manager screen, tap Menu > Tools > Options. 2. Select the check boxes of the types of phone numbers that you want to be added to the SIM card. 3. Under the Mark column, you can change the indicator that will be appended to the SIM contact names for each phone number type. To do so, select a phone type, tap Edit, enter your desired indicator, then tap Save. 4. After modifying, tap OK. 5. Tap Menu > Contacts to SIM. 6.
Programs 12.11 Tasks Use Tasks to keep track of things you need to do. A task can occur once or repeatedly (recurring). Your tasks are displayed in a task list. Overdue tasks are displayed in red. A reminder will be displayed when you have new tasks to be completed. To create a task 1. Tap Start > Programs > Tasks. 2. Tap Menu > New Task, enter a subject for the task, and fill in information such as start and due dates, priority, and so on. 3.
Programs 271 To send task information as a vCalendar After selecting the task to send in the Task screen, tap Menu > Send as vCalendar to send a vCalendar containing task details as a file attachment in an MMS message. For more information, see “MMS” in Chapter 6. 12.12 Voice Recorder Voice Recorder lets you record your voice and quickly send it as an MMS or e-mail attachment, beam it via Bluetooth, or set the recorded voice as your ring tone.
Programs Tip If you need to adjust the sound volume, touch any of the status icons on the title bar and then touch the Volume icon ( ) to open the System Volume screen where you can adjust the volume. To send a voice recording through MMS Select a voice recording, then tap Menu > Send via MMS. A new MMS message is then created with the voice recording automatically inserted as an audio clip. See “MMS” in Chapter 6 to learn how to compose and send MMS messages.
Programs 273 12.13 Voice Speed Dial You can record voice tags so that you can dial a phone number or launch programs simply by speaking a word. To create a voice tag for a phone number 1. On the TouchFLO Home screen, slide to the People tab and then touch All People to open the Contacts screen. Tip You can also touch Start > Contacts to open the Contacts screen. 2. Do one of the following: • Scroll to the desired contact, then touch Menu > Add Voice Tag.
Programs Tip To ensure voice recognition accuracy, record your voice in a quiet place. 4. When completed, a Voice Tag icon is displayed on the right of the item. To create a voice tag for a program Touch Start > Settings > Personal tab > Voice Speed Dial > Application tab. The Application tab displays a list of all installed programs on your device. The procedure for creating a voice tag for a program is the same as the procedure for creating a voice tag for a phone number.
Programs 275 12.14 ZIP The ZIP program increases the storage capacity of your device by allowing you to compress files in the conventional ZIP format. It also allows you to extract files from a zip file. To start ZIP on your device Tap Start > Programs > ZIP. Each time you start ZIP, it searches for files that have the .zip file extension, and displays these files on the Archive List screen. To open a ZIP file and extract files 1.
Programs 3. Touch Save. 4. Touch Menu > Action > Add. 5. Navigate to the folder that contains the files you want to archive. 6. Select files to add by doing one of the following: • Touch a file to select it. • To select several consecutive files, drag over the files. • To select several non-contiguous files, use the stylus to tap and hold on the screen and then select Multi-Select Mode. Select files by tapping each file. (Tap a selected file to deselect it).
Chapter 13 Managing Your Device 13.1 Copying and Managing Files 13.2 Settings On Your Device 13.3 Changing Basic Settings 13.4 Using Connection Setup 13.5 Using Task Manager 13.6 Protecting Your Device 13.7 Managing Memory 13.8 Resetting Your Device 13.9 Windows Update 13.
Managing Your Device 13.1 Copying and Managing Files You can copy files between your device and computer, or copy files to a storage card installed on your device. You can also efficiently manage your files and folders using File Explorer. To copy files using Windows Mobile Device Center or ActiveSync 1. Connect your device to the computer. 2. Click File Management > Browse the contents of your device in Windows Mobile Device Center on your computer, or click Explore in ActiveSync on your computer.
Managing Your Device 279 the desired operation on the shortcut menu. To copy or delete multiple files, tap and drag over the desired files to select, tap and hold the selection, then choose the desired operation on the shortcut menu. To copy files to a storage card 1. Make sure that the storage card is properly installed on your device. 2. Tap Start > Programs > File Explorer and navigate to the appropriate folder. 3. Tap and hold the file you want to copy, then tap Copy. 4.
Managing Your Device Icon Description Menus Set which programs will appear in the Start menu. Owner Information Enter your personal information on your device. Phone Customize phone settings such as ring tone, set a PIN number for your SIM card, and more. Sounds & Notifications Enable sounds for events, notifications, and more, and set the type of notification for different events. Today Customize the appearance and the information to be displayed on the Today screen.
Managing Your Device 281 Icon Description Certificates See information about certificates that are installed on your device. Clear Storage Reset your device to factory default settings. Clock & Alarms Set the device clock to the date and time of your locale or to a visiting time zone when you’re traveling. Alarms can also be set at specified days and times of a week. Customer Feedback Set your device to automatically send information about how you use Windows Mobile. By default, this option is disabled.
Managing Your Device Icon Description Microphone AGC Adjust the volume of your voice automatically when you are recording. Power Check the remaining battery power. You can also set the brightness of the backlight and timeout for turning off the display (switching device to Sleep mode) to conserve battery power. Regional Settings Set the regional configuration to use, including the format for displaying numbers, currency, date, and time on your device.
Managing Your Device 283 Connections tab Icon Description Advanced Network Turn on/off HSDPA, set the line type to use when making circuit switch data (CSD) connection, and set the GPRS authentication method. HSDPA is a 3.5G digital data service that provides high-speed downstream data rates. In order for your device to attain the high connection speed of HSDPA, your wireless service provider must support this feature and you must be within the coverage area of your service provider’s HSDPA network.
Managing Your Device Icon Description Wi-Fi Scan for available wireless networks. Wireless LAN See information about the active wireless network, and customize Wi-Fi settings. 13.3 Changing Basic Settings Date and time To set the date and time 1. On the Home screen Home tab, tap the time display and then tap the Time tab. Tip Tap the More tab and select the Display the clock on the title bar in all programs option to show the clock on all screens. 2.
Managing Your Device 285 Regional settings The style in which numbers, currency, dates, and times are displayed is specified in regional settings. 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. On the System tab, tap Regional Settings > Region tab and then select your region from the list. Note This does not change the language of your device’s operating system. The region you select determines which options will be available on the other tabs. 3.
Managing Your Device To increase or decrease the size of text on the screen 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. On the System tab, tap Screen > Text Size tab. 3. Move the slider to increase or decrease the text size.
Managing Your Device 287 Tips • You can use *.wav, *.mid, *.mp3, *.wma, or other types of sound files that you downloaded from the Internet or copied from your computer as ring tones. To quickly set the music file as a ring tone, tap and hold the music file and then select Set As Ringtone. For a complete list of supported audio file formats for ring tones, see "Specifications" in the Appendix.
Managing Your Device 3. On the Notifications tab, in Event, tap an event name and choose how you want to be notified by selecting the appropriate check boxes. You can choose from several options, such as a special sound, a message, a flashing light, or vibrate. Tips • Turning off sounds and flashing light notifications helps conserve battery power. • The types of notifications that can be enabled depend on the event.
Managing Your Device 289 13.4 Using Connection Setup Connection Setup configures your device’s data connections, such as GPRS, WAP, and MMS, for you so that you do not need to enter the settings manually onto your device. All you need to do is to select your network operator, then Connection Setup does all the configuration for you.
Managing Your Device 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. On the Connections tab, tap Connection Setup. 3. Select the network Country and Operator you want to use, then tap OK. Note If you choose a Country and/or Operator that is different from the installed SIM card network operator, you may not be able to access network services. 4. When prompted to confirm whether you want to configure the data connection settings based on the selected network, tap Yes.
Managing Your Device 291 1. On the Task Manager screen, tap the Button tab. 2. Select the Enable the “X” button to end running programs check box. Note When the Enable the “X” button to end running programs check box is not selected, tapping the Exit button will only close a program screen. The program is not ended and continues to run in the background. 3. Choose the action for shutting down programs (by tapping the by tapping and holding the button). button, or 4. Tap OK.
Managing Your Device To set the sorting preference and program icon size in the Quick Menu 1. On the Task Manager screen, tap the Others tab. 2. In Sort programs in Quick Menu by, choose whether to sort according to Program name or Memory usage. The list will be sorted in ascending order. 3. In Program icon size in Quick Menu, choose whether to use Small size or Large size. 13.
Managing Your Device 293 3. Select the Prompt if device unused for check box, then specify the idle time before the device requires a password. 4. In the Password type box, select the type of password you would like to use. Tip If your device is configured to connect to a network, use an alphanumeric password for increased security. 5. Enter the password in both the Password and Confirm boxes. 6. Tap OK. The next time the device is turned on, you will be prompted to enter your password.
Managing Your Device Important If Encrypt files when placed on a storage card is enabled, backup all files from the storage card before using Clear Storage, hard reset, or updating the ROM system software. Otherwise you will no longer be able to access the encrypted files on the storage card. Use ActiveSync or Windows Mobile Device Center to transfer files between your storage card and computer. After the procedure, copy your files back to the storage card. 13.
Managing Your Device 295 • Remove programs you no longer use. • Reset your device. 13.8 Resetting Your Device Soft reset Occasionally, you may need to reset your device. A soft (or normal) reset of your device clears all active program memory and shuts down all active programs. This can be useful when your device is running slower than normal, or a program is not performing properly. A soft reset is also necessary after the installation of some programs.
Managing Your Device and settings you customized on your device will be lost. Only Windows Mobile® software and other pre-installed programs will remain. Warning! Your device will be set back to factory default settings. Make sure that any additional installed programs and/or user data have been backed up before you perform a hard reset.
Managing Your Device 297 Clear Storage You can also use Clear Storage to reset your device back to factory default settings. 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. On the System tab, tap Clear Storage. 3. Enter “1234” and then tap Yes. 13.9 Windows Update You can update Windows Mobile® on your device with the latest updates, security patches or fixes, if these are available.
Managing Your Device Note Windows Mobile® updates may not be available at all times. Check the Windows Mobile® web site for update information. To change Windows Update options 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. On the System tab, tap Windows Update. 3. Tap Menu and select the option you want to change. • Tap Connections to change how the device connects to the Internet when checking for updates.
Managing Your Device 299 13.10 Battery Saving Tips How long your battery power lasts depends on the battery type and how you use your device. Try the following to help conserve battery life: • When the device is not in use, press POWER to switch off the display. • On the Home screen, slide to the Settings tab and then tap All Settings. On the System tab, tap Power > Advanced tab of the Power settings screen.
Managing Your Device • Lower the volume. • Close battery-intensive programs, such as the Camera, when you are done using them. Make sure the programs are ended and are not continuously running in the background. Refer to “Using Task Manager” in this chapter for information on closing programs.
Appendix A.1 Specifications A.
Appendix A.1 Specifications Processor Qualcomm® MSM7225™, 528 MHz Operating System Windows Mobile® 6.1 Professional Memory • ROM : 512 MB • RAM : 256 MB Dimensions (LxWxT) 102 x 53.5 x 14.5 mm (4.02 x 2.11 x 0.57 inches) Weight 103 grams (3.63 ounces) with battery Display 2.8-inch TFT-LCD touch-sensitive screen with QVGA resolution Network HSDPA/WCDMA: • 850/1900 MHz • Up to 384 kbps up-link and 7.
Appendix 303 Battery Rechargeable Lithium-ion battery Capacity: 1100 mAh Standby time: • Up to 400 hours for WCDMA • Up to 330 hours for GSM Talk time: • Up to 375 minutes for WCDMA • Up to 400 minutes for GSM (The above are subject to network and phone usage.) Expansion Slot microSD™ memory card (SD 2.
Appendix A.2 Regulatory Notices Regulatory Agency Identifications For regulatory identification purposes, your product is assigned a model number of IOLI110. To ensure continued reliable and safe operation of your device, use only the accessories listed below with your IOLI110. The Battery Pack has been assigned a model number of JADE160. Note This product is intended for use with a certified Class 2 Limited Power Source, rated 5 Volts DC, maximum 1 Amp power supply unit.
Appendix 305 • • Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio or television technician for help. Modifications The FCC requires the user to be notified that any changes or modifications made to the device that are not expressly approved by High Tech Computer Corporation may void the user’s authority to operate the equipment.
Appendix substantial margin of safety to give additional protection for the public and to account for any variations in usage. As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, it is recommended that no part of the human body be allowed to come too close to the antenna during operation of the equipment. Your device has an internal antenna. Use only the supplied integral antenna.
Appendix 307 worn operation, to maintain compliance with FCC RF exposure guidelines, use only original manufacturer approved accessories. When carrying the phone while it is on, use the specific original manufacturer supplied or approved carrying case, holster, or other body-worn accessory. SAR Information FCC: 1.250 w/kg @1g(Head) 1.
Appendix Other Medical Devices If you use any other personal medical device, consult the manufacturer of your device to determine if they are adequately shielded from external RF energy. Your physician may be able to assist you in obtaining this information. Turn the phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy.
Appendix 309 RoHS Compliance This product is in compliance with Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003, on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) and its amendments.
Appendix 10 Appendix
Index Symbols 3G 152 A A-GPS 215 A2DP 184 ActiveSync - ActiveSync mode 50 - set up 106 - synchronize with computer 107 - synchronize with Exchange Server 136 Add and remove programs 252 Adobe Reader LE 253 Airplane Mode 63, 262 Alarm 287 Album - about 232 - close Album 237 - play back video 237 - select a photo or video to view 233 - view an image 234 Answering calls 58 Attachment - add to e-mail 129 - download 131 - set IMAP4 to automatically receive attachments 133 - set Outlook to automatically receive
Index - SIM Access Profile (SAP) 64 - stereo headset 184 - synchronize 109 - turn on and off 262 - visible 182 C Calendar - create appointment 254 - send appointment 256 - view appointment 255 Call History 62 Calling - from Contacts 57 - from Home screen 57 - from Phone screen 55 Camera - about 220 - Advanced Options 229 - capture modes 220 - capture photos and videos 222 - file formats 222 - icons 223 - Menu Panel 225 - resolution 225 - zooming 226 Capture photos and videos 222 Car Kit Mode 217, 280
Index 313 Draw 264 E E-mail - Internet e-mail account (POP3/ IMAP4) 124 - mail server settings 125 - Mail tab (Home screen) 72 - send 129 - settings (POP3/IMAP4) 126 - setup wizard 124 - synchronize 102, 132, 136 - types of e-mail accounts 122 EDGE 152 Emergency call 57 Emoticon - MMS 120 - Windows Live Messenger 169 Ending calls 58 Equalizer 248 Excel Mobile 263 Exchange Server 136 F Favorite contacts 69 File Explorer 278 Find contact - Company Directory 144 - on device 260 Finger gestures 86 Finger pa
Index J Java - create folders 267 - install MIDlets/MIDlet suites from device 266 - install MIDlets/MIDlet suites from Internet 266 - manage MIDlets/MIDlet suites 267 - uninstall MIDlets 267 - update a MIDlet/MIDlet suite 267 L Letter Recognizer 98 Library - Music tab (Home screen) 79 - Windows Media Player Mobile 239 Live Messenger 168 Location Settings 215, 281 M Mail tab (Home screen) 72 Making calls 55 Map Search tab (Home screen) 82 Meeting request 142, 256 Memory 48, 294, 302 Messages tab (H
Index 315 P Panorama capture mode 221 Password 292 People tab (Home screen) 69 Phone 54 Phone Keypad 93 Phone services 288 Photo capture mode 221 Photos and Videos tab (Home screen) 75 Picture Theme capture mode 222 PIN 54, 292 Playlists - Audio Manager 245 - Windows Media Player Mobile 243 Play media 242 Play music - Audio Manager 244 - Music tab (Home screen) 77 - Windows Media Player Mobile 242 Podcasts 179 POP3 124 PowerPoint Mobile 263 Profile 83 Programs 252 Programs tab (Home screen) 85 Put call o
Index - Beam 283 - Bluetooth 283 - Comm Manager 283 - Connections 152, 153, 283 - Connection Setup 283, 289 - Domain Enroll 283 - USB to PC 109, 283 - Wi-Fi 151, 284 - Wireless LAN 150, 284 Settings (Personal tab) - Buttons 279 - Input 279 - Lock 279, 292 - Menus 280 - Owner Information 280 - Phone 280, 286, 288 - Sounds & Notifications 280, 287 - Today 280 - Voice Speed Dial 274, 280 Settings (System tab) - About 280, 286 - Car Kit Mode 217, 280 - Certificates 281 - Clear Storage 281, 297 - Clock & Ala
Index 317 Swap/switch calls 60 Synchronize - ActiveSync 107 - change information types 108 - music and videos 110 - via Bluetooth 109 - Windows Media Player 240 - Windows Mobile Device Center 103 - with computer 83, 107 - with Exchange Server 83, 136 T T9 94 Task Manager 282, 290 Tasks 270 Text messages - copy from SIM card 116 - copy to SIM card 116 - create new message 113 - Messages tab (Home screen) 71 - send 114 Text size (screen) 286 TomTom NAVIGATOR 202 TouchFLO 65, 282 Transcriber 98 Troubleshoot
Index Y YouTube 159 Z ZIP - about 275 - create archive 275 - open zip file and extract files 275 Zooming - Album 235 - Camera 226 - finger gestures 87 - Opera Mobile 157 - TomTom NAVIGATOR 212
