第 1 頁，共 71 頁 Additional Product Information Trademark and Copyright Information © Copyright 2005 Hewlett-Packard Development Company, L.P. http://www.hp.com The information contained herein is subject to change without notice. The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
第 2 頁，共 71 頁 l l l l l l l l l l l l l l l l l l l l l Taking Notes During A Call Making a Call By Entering a Contact Name Making a Call From a Hyperlink Phone Number Changing Phone Network Settings Manually Selecting a Phone Network Viewing Available Phone Networks Setting Preferred Networks Limiting Calls to Specific Area Codes or Phone Numbers Inserting an International Country Code Automatic Frequency Band Selection Copying a Contact From a SIM to a Device Creating a Voice Note Deleting a Voice Note Li
第 3 頁，共 71 頁 call. If you have more than one call on the line, you can switch between calls. 1. 2. To put a call on hold, tap Hold. To switch between calls, tap Swap. Changing Phone Service Settings Once your phone service is set up through your mobile phone service provider, you can change service settings on your HP iPAQ.
第 4 頁，共 71 頁 Use call barring to block certain types of calls. 1. From the on-screen phone keypad, tap Menu > Options > Services tab. 2. Tap Call Barring > Get Settings. 3. Select the type of calls you want to block. Entering Voice Mail Or Text Messages Phone Number To use voice mail or send text messages (SMS), you must enter the correct voice mail or text message phone number in Phone settings. NOTE Sending text messages is not included in all network service plans.
第 5 頁，共 71 頁 3. 4. 5. 6. Tap Talk. Once you are connected, tap Hold. Dial the second number. Once you are connected, tap Menu > Conference. NOTE To add more parties to the conference call, dial each number, connect, and then tap Menu > Conference. Managing Calls Using Call History Call History provides the time and duration of all incoming, outgoing, and missed calls, and a summary of total calls. Call History also provides easy access to notes taken during a call.
第 6 頁，共 71 頁 To lock the phone: 1. 2. 3. 4. 5. 6. Press the green Answer/Send button on the keyboard. Tap Menu > Options using the on-screen keypad. Select the Require PIN when phone is used check box. Tap Change PIN. Enter a Personal Identification Number (PIN) and press Enter. Reenter new PIN for confirmation and press Enter for verification. To unlock the phone: 1. Enter the PIN to access your device. 2. Press the green Answer/Send button on the keyboard. 3. Tap Menu > Options on the on-screen keypad.
第 7 頁，共 71 頁 settings. For an alternate method, press the volume control button on the side of the HP iPAQ. Taking Notes During A Call To create a note during a call: 1. 2. From the phone keypad, tap Note. Enter your text. To access a note you created during a call: 1. 2. 3. Tap Call History on the on-screen phone keypad. Tap and hold the name or number for the phone call entry containing the note. Tap View Note. Making a Call By Entering a Contact Name To place a call using a Contact name: 1. 2. 3.
第 8 頁，共 71 頁 Changing Phone Network Settings In Phone network settings, you can: ? ? ? View available wireless phone networks Determine the order in which your phone accesses other phone networks (if the current one is unavailable) Specify whether you want to change networks manually or automatically To change network settings: 1. Tap Start > Settings > Phone > Network tab. 2. Select the network setting option(s) you want to change. To change network settings from the on-screen phone keypad: 1. 2.
第 9 頁，共 71 頁 2. In the Network selection list, tap Manual. 3. Select an available network. 4. Tap OK. Setting Preferred Networks You can set preferred phone networks in the order you want your HP iPAQ to access them. For example, if your first preferred network is unavailable, your HP iPAQ tries to access your second preferred phone network. To select a preferred network: 1. From the on-screen phone keypad, tap Menu > Options > Network tab. 2. Tap the Set Networks button and select your preferred networks.
第 10 頁，共 71 頁 To make an international call, you must include a country code before the phone number. To insert a country code: 1. 2. On the on-screen phone keypad, press and hold 0 until the plus (+) sign appears. Enter the country code and phone number. NOTE You can also insert a plus (+) sign into a Contact's phone number for faster dialing. Automatic Frequency Band Selection Your HP iPAQ has an integrated GSM/GPRS/EDGE feature that supports four different frequency bands for international roaming.
第 11 頁，共 71 頁 NOTE If the Recording toolbar does not appear, tap Menu > View Recording Toolbar. 3. Tap the Record button. 4. Speak into the microphone located at the bottom of the unit. 5. When finished recording the note, tap the Stop button on the Recording Toolbar. 6. When finished, tap OK to return to the note list. NOTE If recording in an open note, an icon appears in the note. If creating a stand-alone recording, an icon appears in the note list.
第 12 頁，共 71 頁 1. Tap Start > Programs > Notes. 2. Tap and hold the note to rename. 3. Tap Rename/Move. 4. Enter the new name in the Name box. 5. Tap OK. Viewing Call Timers To view call counter information: 1. Press the green Answer/Send button. 2. Tap Call History > Menu > Call Timers. Resetting Call Timers To reset the call counter information: 1. Press the green Answer/Send button to access the on-screen phone keypad. 2. Tap Call History > Menu > Call Timers. 3. Tap the Reset button. 4. Tap OK.
第 13 頁，共 71 頁 Microsoft Windows Mobile 5.0 automatically manages access to your GPS receiver to allow multiple programs to simultaneously access GPS data. Always allow for the operating system to manage GPS automatically. Otherwise, only one program, at a time, can access the GPS receiver located in your unit. 1. Tap Start > Settings > System tab > GPS. 2. Tap Access tab. 3. Select the Manage GPS automatically check box. 4. Tap OK. NOTE Some programs may need direct access to the GPS receiver.
第 14 頁，共 71 頁 1. Tap Start > Settings > System tab > GPS. 2. Tap Hardware tab. 3. Tap the GPS hardware port list and select COM7. Your GPS receiver is connected to this port. NOTE The GPS hardware port must be different from the GPS program port. 4. Tap the Baud rate list. 5. Select 57600 or higher for the baud rate for your GPS receiver. 6. Tap OK.
第 15 頁，共 71 頁 l Wi-Fi Security Protocol Utilities Wi-Fi With wireless access, you do not need to use cables to connect your HP iPAQ to the Internet. Instead, access points transmit data to and from your wireless device. Your HP iPAQ can connect to an 802.11b WLAN or connect directly to other WLAN-enabled devices.
第 16 頁，共 71 頁 Setting Up an Automatic Choice for Connections If you have already created more than one connection, you can set up your HP iPAQ to connect to the best available connection automatically. 1. Tap Start > Settings > Connections tab > Connections. 2. Under My ISP or My Work Network, tap Manage existing connections. 3. Tap Auto pick. Connecting to Intranet URLs If you want to connect to intranet sites that have periods in their URLs (for example, intranet.companyname.
第 17 頁，共 71 頁 This section provides information about the following topics: l l l l l Setting Up Proxy Server Settings Configuring Advanced Proxy Settings Setting Up a VPN Server Connection Changing a Connection Group Name Changing an Intranet URL Setting Up Proxy Server Settings If you are connected to your Internet Service Provider (ISP) or private network during synchronization, your device should download proper proxy settings during synchronization from your computer.
第 18 頁，共 71 頁 Configuring Advanced Proxy Settings 1. 2. 3. For the appropriate server type, enter the proxy server name and port. If necessary, enter the credentials for connecting with your proxy server. If you are configuring a Socks proxy, select Socks 4 or Socks 5. If using Socks 5, enter the credentials for connecting with your proxy server. Setting Up a VPN Server Connection A VPN connection helps you to securely connect to servers, such as a corporate network, via the Internet.
第 19 頁，共 71 頁 To manually start a connection, tap and hold the connection, then tap Connect. To delete a connection, tap and hold the connection you want to remove, then tap Delete. Changing a Connection Group Name Your device is already set up with two groups of connection settings: My ISP and My Work Network. You can change the name of these groups to something more meaningful.
第 20 頁，共 71 頁 A wireless network can be added when the network is automatically detected. Or, you can manually enter the settings information to add the network. Before doing these steps, determine if authentication information is needed. NOTE Before configuring a Wi-Fi network, make sure you turn on your Wi-Fi radio by tapping iPAQ Wireless on the Today screen, then Wi-Fi. 1. To manually enter information, tap Start > Settings > Connections tab > Network Cards > Wireless tab. 2.
第 21 頁，共 71 頁 Working with Bluetooth Manager Use Bluetooth Manager to: ? Establish connections ? Exchange business cards ? Display shortcuts To access Bluetooth Manager: 1. From the Today screen, tap the iPAQ Wireless icon. 2. Tap the Bluetooth icon to turn Bluetooth on. 3. Tap the Bluetooth tab > Bluetooth Connections. The first screen that displays is My Shortcuts. When you are required to locate a device and connect to it, the Bluetooth browser searches for other Bluetooth devices.
第 22 頁，共 71 頁 ? ActiveSync— Uses SPP to connect to ActiveSync on a computer ? Advanced Audio Distribution Profile (A2DP) ? Audio Video Remote Control Profile (AVRCP) ? Basic Imaging Profile (BIP) ? Basic Printer profile (BPP) ? Dial-up Networking (DUN) ? File Transfer Protocol (FTP) ? Generic Access Profile (GAP) ? Hands Free Profile (HFP) ? Headset Support Profile (HSP) ? Human Interface Device Profile (HID) ? LAN Access Profile (LAP) ? Object Exchange (OBEX) Protocol ? Object Pu
第 23 頁，共 71 頁 1. 2. 3. 4. Tap Start > Settings > Connections tab. Tap Bluetooth > Devices tab. Tap and hold the partnership you want to end. Tap Delete. To accept a Bluetooth Partnership: 1. 2. Be sure your device is turned on, discoverable, and within close range. When prompted to accept a partnership with the device that is requesting the relationship, tap Yes. 3. If a passkey is requested, enter an alphanumeric passkey between 1 and 16 characters in Passkey, and tap Next.
第 24 頁，共 71 頁 NOTE Some devices, such as mobile phones, need to be placed in a mode to accept a bond from another device. Refer to that device’s user instructions for more information. If you can see other devices, but you cannot connect or exchange data with them, try the following: ? ? Be sure the other device has not restricted your access. Try initiating pairing from the other device. Some Bluetooth devices can only initiate pairing and cannot respond to pairing requests from other devices.
第 25 頁，共 71 頁 1. From the Today screen, tap iPAQ Wireless. 2. Tap the Bluetooth icon to turn on Bluetooth. 3. Tap the Bluetooth tab > Bluetooth Settings. Opening Bluetooth Settings 1. From the Today screen, tap iPAQ Wireless. 2. Tap the Bluetooth icon to turn on Bluetooth. 3. Tap the Bluetooth tab > Bluetooth Settings. Requiring Authorization to Access Services If you choose to require authorization to access services, you must authorize each connection.
第 26 頁，共 71 頁 2. Tap the Bluetooth icon to turn on Bluetooth. 3. Tap the Bluetooth tab > Bluetooth Settings > Services tab. 4. Tap the service you want to enable: File Transfer, Information Exchange, Serial Port, Personal Network Server, Hands free, or Dial-up Networking Server. 5. Select Authorization required and Authentication (Passkey) required if you want more security. 6. Select Encryption Required if you want to require all data exchanged between the devices to be encrypted. 7. Tap OK.
第 27 頁，共 71 頁 7. Tap Finish. Infrared This section provides information about the following topics: l l l Beaming an Item Receiving an Infrared Beam Synchronizing with the Infrared Connection Beaming an Item In the Calendar, Contacts, Notes, Tasks, Excel Mobile, Word Mobile, and PowerPoint Mobile, you can beam files and information to other devices using infrared. 1. 2. 3.
第 28 頁，共 71 頁 Synchronizing with the Infrared Connection As an alternative to using the desktop cradle or autosync cable, you can synchronize your HP iPAQ and your computer using the infrared connection if you have an infrared port or an infrared USB adapter installed on your computer. The infrared connection option works only on computers that have Microsoft Windows 2000 or XP operating systems installed. To set up an infrared connection to a computer: 1.
第 29 頁，共 71 頁 ? Initiate GPRS Connection for updates — Allows wireless updates to your device. NOTE ? ? Since the GPS update files are small, you should be able to download them wirelessly with little impact to device performance. Show expiration reminders and warnings — Notifies you by notification when your satellite location file is out-of-date. If this setting is not enabled, notifications do not occur. Show tray icon on today screen — Displays the the Quick GPS Connection icon.
第 30 頁，共 71 頁 l l l l l l Using HP ProtectTools Setting Up Security Unlocking Your HP iPAQ Encrypting/Decrypting Data Changing Your HP ProtectTools Password Managing Encrypted Folders Using HP ProtectTools In addition to the security available from Microsoft, your HP iPAQ has a more robust security option known as HP ProtectTools, which helps protect your HP iPAQ by providing authentication and encryption of: ? E-mail ? Calendar ? Contacts ? Notes ? Tasks ? All files stored in the My Documents
第 31 頁，共 71 頁 ? ? Lock device— secures device by requiring your PIN or password to authenticate access to the HP iPAQ. Log off— secures device by requiring your PIN or password, stops running all programs, and encrypts your data. You can also select the amount of time between when you last used the device and when the data is encrypted. Because encryption/decryption can take some time, if you use your device frequently, you may want to select a longer period of time. NOTE 5. 6. Tap Next.
第 32 頁，共 71 頁 14. Tap OK. 15. If requested, enter your PIN or password two times for verification purposes. 16. From the Set up Passwords screen, select your hint question by tapping the left and right arrow buttons near the question. Answer the question two times for verification purposes. 17. Tap OK. Your HP iPAQ resets itself after a few seconds, or you can tap the Reset Device button to reset the device immediately.
第 33 頁，共 71 頁 If your HP iPAQ has been off for longer than the time you selected during setup, your data is encrypted. When you turn the device on, you are prompted to authenticate using your PIN and/or password. After successful authentication, your data is decrypted. This may take a few moments depending on the amount of data you chose to have encrypted. However, encryption runs in the background, and you can perform other tasks on your HP iPAQ during this time.
第 34 頁，共 71 頁 2. Tap Encrypted Folder at the bottom of the screen. 3. Tap Add. 4. Enter the name, location, and estimated size of the folder to be encrypted. NOTE The size of the folder is its maximum size and cannot be changed. 5. Tap OK. The device formats the new folder. 6. Tap OK. NOTE You cannot encrypt existing folders. For more information on managing encrypted folders, refer to HP ProtectTools Help.
第 35 頁，共 71 頁 of light on the back of the HP iPAQ, and when the shutter button is pressed, the light flashes briefly. In video mode, when the LED is toggled on, it emits a low level of light without flashing. Tap to take short movie images or video clips. Tap to toggle on GPS. Tap to take a picture. Tap to delete a pictire. Tap to exit the HP Photosmart Camera application. Tap for Help. Changing Camera Settings To change the camera settings: 1. 2. Tap Start > Programs > Photosmart Camera.
第 36 頁，共 71 頁 l l l l l l l l l l Changing Color Settings Changing Compression Settings Changing Resolution Settings Changing the Flicker Filter Turning Camera Sounds On and Off Configuring Instant Review Using the Self-Timer Configuring File Settings Configuring Video Format Changing GPS Settings Changing Color Settings To capture pictures with creative effects: 1. 2. Tap the Settings tab > Color > Change button. Make the necessary changes, and then tap OK.
第 37 頁，共 71 頁 ? Best - Highest quality and largest file size. NOTE Higher-quality pictures look better, but are also larger in file sze. Lower-quality pictures require less storage space and may take less time when sending by e-mail or infrared. Changing Resolution Settings To change the picture resolution: 1. Tap the Settings tab > Resolution > Change button. 2. Make the necessary changes, and then tap OK. To reset the camera settings, tap the Reset button.
第 38 頁，共 71 頁 ? at 50 Hz ? 60 Hz - filters banding caused by fluorescent light bulbs operating on an alternating current at 60 Hz Turning Camera Sounds On and Off To turn the camera sounds on or off: 1. Tap the Setup tab > Camera Sounds > Change button. 2. Tap either On or Off. 3. Tap OK. Configuring Instant Review Instant Review determines how quickly you review recently captured pictures. To configure the instant review settings: 1. 2. 3. Tap the Setup tab > Instant Review > Change button.
第 39 頁，共 71 頁 Use File Settings to specify how pictures are named and stored in addition to adjusting the picture counter. To configure the file settings: 1. Tap the File tab and change one or more of the following: ? Filename prefix - The text added at the beginning of the filename. You can save the filename prefix with any alpha numeric character and NOTE certain symbols. ? ? 2. Counter value - The number (between 0000 and 9999) that automatically increases each time a picture is taken.
第 40 頁，共 71 頁 2. 3. Tap the GPS tab. Select the Enable GPS check box. NOTE To use the GPS feature within the camera, take pictures outside where the HP iPAQ can get a good signal from GPS satellites. Also, before you take a picture, be sure the HP Photosmart Camera preview screen displays a GPS location. Tips for Taking Better Pictures Use these tips to take high quality pictures. ? ? To take a clear picture, do not move the camera until after you hear the first and second shutter sounds.
第 41 頁，共 71 頁 Download HP Photosmart Premier Software to your personal computer to view, edit, organize, and print pictures. HP Photosmart Premier is located on the Getting Started CD. Attaching a Voice Note to a Picture To attach a sound file to a picture: 1. 2. 3. 4. Tap Start > Programs > HP Photosmart Mobile. Tap the thumbnail picture in which you want to add a voice note. Tap the Cassette icon . Tap the Record button on the Recording toolbar. 5.
第 42 頁，共 71 頁 HP Photosmart Premier l HP Photosmart Premier HP Photosmart Premier While HP Photosmart Mobile allows you to view pictures on your HP iPAQ, HP Photosmart Premier allows you to view, organize, edit, share, and print pictures on your personal computer. Simply, use the Getting Started CD to install this imaging software on a personal computer.
第 43 頁，共 71 頁 ? Backup ? Upgrade available for CD archiving ? Back up and restore to CD (or DVD with upgrade) ? Set reminders to archive photos ? Digital negatives For instructions on using any of these features, install the Getting Started CD on your personal computer. HP Image Transfer l l Installing HP Image Transfer Enabling and Modifying Settings Installing HP Image Transfer Use HP Image Transfer to automatically transfer pictures and videos from the HP iPAQ to the personal computer.
第 44 頁，共 71 頁 2. 3. Double-click Image under the Details window or select Options from the ActiveSync menu. Select Image on the Sync options tab, and then select the Settings button. Once image transfer has been enabled, the schedule and rules you have configured for ActiveSync synchronization are also applied to your image transfers. Depending on your configuration, images may be transferred continuously while the device is connected, only upon connection, or manually.
第 45 頁，共 71 頁 You cannot add a new account while connected. Tap Menu > Stop Send/Receive to disconnect. Replying to or Forwarding a Message 1. Open the message and tap Reply, or Menu > Reply All, or Menu > Forward. 2. Enter your response. To quickly add common messages, tap Menu > My Text and tap a desired message. NOTE 3. 4. To edit a My Text message, in a new message, tap Menu > My Text > Edit My Text Messages. Tap the message you want to edit and enter new text at the bottom of the screen.
第 46 頁，共 71 頁 enabled, Messaging checks your contact list and then the directory service to verify names that you enter in the To, Cc, and Bcc fields. To enable a directory service, or if you want to use additional services: 1. If you are adding a new account, ask your network administrator: ? for the name of the directory service and the server ? whether authentication is necessary for your server 2. 3. Tap Start > Messaging > Menu > Tools > Options > Address tab.
第 47 頁，共 71 頁 ▲ Tap Start > Settings > System tab > About. The operating system version displays near the top of the screen. Adjusting the Volume You can change the volume for various sounds, such as the sound you hear when you tap program names and menu options. 1. 2. 3. Tap the Speaker icon at the top of the screen. Move the system volume slider to the desired volume level. To mute system sounds, tap Off.
第 48 頁，共 71 頁 You can set the backlight to dim after a specified amount of time has elapsed. 1. 2. 3. Tap Start > Settings > System tab > Backlight. Tap the Battery power tab or the External power tab. Select the Turn off backlight if device is not used for check box, then specify the time delay. You can also increase or decrease the brightness of the backlight. 1. 2. Tap Start > Settings > System tab > Backlight > Brightness tab. Move the sliders up to increase and down to decrease the brightness.
第 49 頁，共 71 頁 1. Tap Start > Settings > System tab > Memory > Running Programs tab. 2. In the Running Programs list, tap the program you want to close, then tap Stop. Reassigning Programs or Shortcuts to Program Buttons Your HP iPAQ comes with programs already assigned to hardware buttons. You can customize these buttons to open the programs you use most or to perform certain shortcuts such as changing the screen orientation, opening the Today screen, or opening Input Panel. 1. 2. 3. 4.
第 50 頁，共 71 頁 To close a shortcut menu without performing an action, tap anywhere outside the menu. Showing the Clock in All Programs The clock may not show in the title bar of certain programs by default. To choose to have the clock always show in the title bar: 1. 2. Tap Start > Settings > System tab > Clock & Alarms. On the More tab, click to select the Display the clock on the title bar in all programs check box.
第 51 頁，共 71 頁 2. Under Delay before first repeat, move the slider to shorten or lengthen the time that elapses before scrolling begins. Under Repeat rate, move the slider to change the time it takes to scroll from one item to the next. 3. Calendar l l l Accessing Calendar Changing the Display of the Work Week Setting a Default Reminder for All New Appointments Accessing Calendar Use Calendar to schedule appointments, including meetings and other events.
第 52 頁，共 71 頁 To automatically turn on a reminder for all new appointments: 1. Tap Start > Calendar. 2. Tap Menu > Options > Appointments tab. 3. Select the Set reminders for new items check box. 4. Set the time for the reminder to alert you. 5. Tap OK.
第 53 頁，共 71 頁 1. 2. 3. 4. Tap Start > Contacts. Tap the contact. Tap Menu > Edit and enter the changes. When finished, tap OK. To include a nickname, title, and more, for an existing contact in the contact list, tap the contact, tap Menu > Edit, and tap the Name arrow. Copying a Contact 1. 2. 3. 4. 5. 6. Tap Start > Contacts. Tap and hold the contact you want to copy. Tap Copy Contact. Tap the copy of the contact. Tap Menu > Edit. Change the contact information as needed and tap OK.
第 54 頁，共 71 頁 Sending an E-mail Message to a Contact 1. 2. 3. 4. Tap Start > Contacts. Tap the contact you want to send a message to. Tap the address you want to send a message to. Tap the account you want to send the message from. NOTE To quickly add a contact's address to a new message, tap the To, Cc, or Bcc line, and tap Menu > Add Recipient. Tap the contact you want to send the message to and choose the address if necessary. Sending a Text Message to a Contact 1. 2. 3.
第 55 頁，共 71 頁 4. 5. Tap Picture. Do one of the following: ? Tap the picture you want to add. ? Tap Camera and take a picture. To remove a picture from contact information: 1. 2. 3. 4. Tap Start > Contacts. Tap the contact. Tap Menu > Edit. Tap Menu > Remove Picture. Working with the Contact List There are several ways to use and customize the contact list. Here are a few tips on how to make it work for you. 1. 2. Tap Start > Contacts.
第 56 頁，共 71 頁 l l l l Writing with Transcriber Entering Text Using the Keyboard Entering Text using Letter Recognizer Entering Text using Block Recognizer Writing with Transcriber Transcriber works transparently in the background of programs, recognizing words with its integrated dictionary. When Transcriber is turned on, it interprets stylus movement anywhere on the screen as handwriting input. To write with Transcriber: 1. 2. From any program, position the cursor where you want the text to appear.
第 57 頁，共 71 頁 ? Enter capital letters by writing in the ABC (left) area of the box. ? Enter lowercase letters by writing in the abc (middle) area of the box. ? Enter numbers by writing in the 123 (right) area of the box. Enter punctuation and symbols by tapping in either area of the box and then writing the desired character. ? NOTE Letter Recognizer is available when text entry is possible. Hint For help with writing characters with Letter Recognizer, tap the question mark near the writing area.
第 58 頁，共 71 頁 ? ? Expanding the memory of your HP iPAQ by using a Compact Flash (CF) or Secure Digital (SD) memory card Adding functionality such as a Secure Digital Input/Output (SDIO) camera NOTE Expansion cards must be purchased separately and are not included with your HP iPAQ. To locate information about expansion cards, visit the HP Web site at www.hp.com/go/ipaqaccessories. Installing an Expansion Card To install an expansion card into the expansion slot on the HP iPAQ: 1. 2. 3.
第 59 頁，共 71 頁 NOTE HP recommends inserting the protective plastic cards that came with your HP iPAQ into the expansion slots when they are not in use. Viewing Content of an Expansion Card Use File Explorer to view the files that are located on your optional expansion card. 1. 2. Tap Start > Programs > File Explorer. Tap the Up soft key at the bottom of the screen, then select the Storage Card folder to see a list of files and folders.
第 60 頁，共 71 頁 synchronize with the Palm Desktop software. If you need to change your settings, open Microsoft Outlook, then click Tools > Options > Other tab and check the Make Outlook the default program for E-mail, Contacts, and Calendar checkbox. Click Apply > OK, and then restart your personal computer. 3. Use the HotSync software located on the Companion CD that came with your Palm unit to synchronize your Palm information with Outlook.
第 61 頁，共 71 頁 Setting the Start and Due Dates for a Task 1. 2. 3. Tap Start > Programs > Tasks. Tap the task you want to set start and due dates for. Tap Edit and do one or both of the following: ? Tap Starts to enter a start date for the task. ? 4. Tap Due to enter a due date for the task. Tap OK. Showing Start and Due Dates in the Task List 1. 2. 3. 4. Tap Start > Programs > Tasks. Tap Menu > Options. Select the Show start and due dates check box. Tap OK.
第 62 頁，共 71 頁 NOTE To mark an open task as completed, tap Edit, and in the Status box, tap Completed. Other Topics l Registering your HP iPAQ Registering your HP iPAQ When you register your HP iPAQ with HP, you receive e-mail regarding special offers and promotions. Take time now to register your HP iPAQ online at http://www.register.hp.com.
第 63 頁，共 71 頁 ? Reorient or relocate the receiving antenna. ? Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio or television technician for help.
第 64 頁，共 71 頁 For questions regarding this FCC declaration, contact: Hewlett-Packard Development Company, L.P. P. O. Box 692000, Mail Stop 510101 Houston, Texas 77269-2000 Or, call (281) 514-3333 To identify this product, refer to the Part, Series, or Model number found on the product. Canadian Notice This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations.
第 65 頁，共 71 頁 Compliance with these directives implies conformity to applicable harmonized European standards (European Norms) which are listed on the EU Declaration of Conformity issued by Hewlett-Packard for this product or product family. This compliance is indicated by the following conformity marking placed on the product: This marking is valid for non-Telecom products and EU harmonized Telecom products (e.g. Bluetooth). This marking is valid for EU non-harmonized Telecom products .
第 66 頁，共 71 頁 2454-2483.5 MHz frequency band (channels 10-13) may be used. For the latest requirements, see http://www.art-telecom.fr. Battery Warning WARNING! This HP iPAQ device contains a LITHIUM-ION rechargeable battery. To reduce the risk of fire or burns, do not disassemble, crush, puncture, short external contacts, or dispose of in fire or water. Replace only with the HP battery Spare Part Number 383745-001. Replacing with a nonapproved HP battery will void the warranty.
第 67 頁，共 71 頁 If you have a medical condition that requires you to use a pacemaker, hearing aid, or any type of medical electronic equipment, consult the manufacturer of the equipment to determine if the medical equipment is shielded from RF energy. Turn off your HP iPAQ in health care facilities or hospitals when there are posted restrictions requiring you to do so. Wireless Notices In some environments, the use of wireless devices may be restricted.
第 68 頁，共 71 頁 filing is only applicable for GSM 850 MHz and PCS 1900 MHz operations. Health and Safety Information Since your HP wireless phone is a radio transmitter and receiver, you may be exposed to Radio Frequency (RF) signals when it is powered on. However, your HP wireless phone has been designed so that it does not exceed the emission limits for exposure to radio frequency energy that are set by the Federal Communications Commission of the U.S. Government.
第 69 頁，共 71 頁 Este equipamento opera em caráter secundário, isto é, não tem direito a proteção contra interferência prejudicial, mesmo de estações do mesmo tipo, e não pode causar interferência a sistemas operando em caráter primário. Singaporean Wireless Notice ? ? ? ? ? ? ? Switch off your cellular telephone when in an aircraft. The use of cellular telephones in an aircraft may be dangerous to the operation of the aircraft, disrupt the cellular network, and is illegal.
第 70 頁，共 71 頁 Using accessibility shortcut keys in the Help Viewer Using accessibility shortcut keys in the Help Viewer The following topics describe how you can navigate in this user guide.
第 71 頁，共 71 頁 Using the HTML Help Viewer The following topics provide information about navigating and using this HTML Help User Guide. For more information, click one of the following http://www.hp.com topics: l l l l l l l Getting more out of help To find a help topic To create a list of favorite help topics To copy a help topic To print the current help topic To find topics using the toolbar buttons Using the shortcut menu commands http://www.hp.com file://C:\Documents%20and%20Settings\Cathy.ADTNT\Lo
