Pocke User Manual
Please Read Before Proceeding THIS DEVICE IS NOT CHARGED WHEN YOU TAKE IT OUT OF THE BOX. DO NOT REMOVE THE BATTERY PACK WHEN THE DEVICE IS CHARGING. YOUR WARRANTY IS INVALIDATED IF YOU OPEN OR TAMPER WITH THE DEVICE’S OUTER CASING. PRIVACY RESTRICTIONS Some countries require full disclosure of recorded telephone conversations, and stipulate that you must inform the person with whom you are speaking that the conversation is being recorded.
CAUTION: Improper grounding when connecting the product to an associated equipment can result in a risk of electric shock. This product is equipped with a USB cable for connecting the product to a desktop or notebook computer. Be sure your computer is properly grounded (earthed) before connecting the product to the computer. The power supply cord of a desktop or notebook computer has an equipment-grounding conductor and a grounding plug.
SAFETY PRECAUTIONS FOR DIRECT SUNLIGHT Keep this product away from excessive moisture and extreme temperatures. Do not leave the product or its battery inside a vehicle or in places where the temperature may exceed 60°C (140°F), such as on a car dashboard, window sill, or behind a glass that is exposed to direct sunlight or strong ultraviolet light for extended periods of time. This may damage the product, overheat the battery, or pose a risk to the vehicle.
EXPLOSIVE ATMOSPHERES When in any area with a potentially explosive atmosphere or where flammable materials exist, the product should be turned off and the user should obey all signs and instructions. Sparks in such areas could cause an explosion or fire resulting in bodily injury or even death.
• Damage requiring service Unplug the product from the electrical outlet and refer servicing to an authorized service technician or provider under the following conditions: • Liquid has been spilled or an object has fallen into the product. • The product has been exposed to rain or water. • The product has been dropped or damaged. • There are noticeable signs of overheating. • The product does not operate normally when you follow the operating instructions.
1 Contents Chapter 1 Getting Started 1 1 1 11 1 1 1.1 Getting to Know Your Device and Its Accessories.. 12 1.2 About the USIM/SIM Card and Battery ..................... 18 1.3 Starting Up .................................................................. 20 2 1.4 The Today Screen ....................................................... 22 2 1.5 Using the Programs ................................................... 24 2 1.6 Device Settings ................................................
Chapter 3 Using Phone Features 39 3.1 Using the Phone ......................................................... 40 3.2 Making a Call .............................................................. 42 3.3 Receiving a Call .......................................................... 45 3.4 Making a Video Call .................................................... 45 3.5 Receiving a Video Call ............................................... 49 3.6 Smart Dialing .........................................
Chapter 6 Getting Connected 89 6.1 Connecting to the Internet ......................................... 90 6.2 Internet Explorer ......................................................... 94 6.3 Using Comm Manager ............................................... 96 6.4 Using Bluetooth .......................................................... 98 6.5 Using Wi-Fi ................................................................ 106 6.6 Using Wireless Modem ...........................................
Chapter 9 Using Other Applications 173 9.1 Word Mobile .............................................................. 174 9.2 Excel Mobile .............................................................. 174 9.3 Viewing Slide Shows with PowerPoint Mobile ...... 175 9.4 Using ClearVue PDF ................................................. 176 9.5 Using MIDlet Manager .............................................. 177 9.6 Using ZIP ...................................................................
Chapter 1 Getting Started 1.1 Getting to Know Your Device and Its Accessories 1.2 About the USIM/SIM Card and Battery 1.3 Starting Up 1.4 The Today Screen 1.5 Using the Programs 1.
1.
No. Item 1 Hardware Keyboard Function See Chapter 2 for details. 2 MESSAGING Button Press to quick start your Messaging. 3 Notification LED 1 This LED shows a blinking Blue light for Bluetooth system notification of powered-up and ready to transmit radio frequency signal, and a blinking Green light for Wi-Fi status. When both Bluetooth and Wi-Fi are enabled, their lights blink alternately.
No. Item 14 Right SOFT KEY Function Press to execute the command shown in the label above the button. 15 TALK Button Press to answer an incoming call or dial a number. 16 START Button Press to open the Start menu. 17 Navigation Control/ ENTER Press this multi-directional control up, down, left, or right to move through menus and program instructions; carry out the selection by pressing the center button; press and hold a selection to choose option(s) from the shortcut menu.
21 22 23 20 24 25 26 27 28 29 30 31 32 33 34 Getting Started | 15
No. Item 20 Car Antenna Connector Function Connect your phone to the car antenna while in a car to have better reception quality. 21 Self-Portrait Mirror Turn the back side of your device to face yourself so that your image reflects on the mirror when taking self-portrait shots. 22 Main Camera This camera takes still photos and records video clips. It provides two shooting modes: Normal mode and Macro (close-up) mode.
No. Item 32 Sync Connector/ Earphone Jack Function Use this connector to synchronize data by connecting the provided USB Sync cable or to recharge the battery via the provided AC adapter. You can also connect the provided USB stereo headset for hands-free conversation or for listening to audio media. 33 RESET Button With the stylus, press the RESET button to softreset your device. 34 Microphone Speak into the microphone when receiving or making a phone call or voice recording.
1.2 About the USIM/SIM Card and Battery Always turn off your device before installing/replacing the battery and USIM/SIM card. Follow the instructions in the Quick Start Guide to install a 3G USIM (Uinversal IC Card) or a GSM SIM (Subscriber Identity Module) card provided by your local network service provider and to install the battery. The USIM/SIM card contains your phone number, service details, and phonebook/message memory. Your device supports both 1.8V and 3V USIM/SIM cards.
To check the battery power Do one of the following: • Tap the battery level icon ( • Alternatively, tap Start > Settings > Systems tab > Power. ) on the Today screen. Power Information Charge the battery New batteries are shipped partially charged. Before you start using your device, it is recommended that you install and charge the battery. Some batteries perform best after several full charge/discharge cycles.
1.3 Starting Up Turn your device on and off To turn on your device, press the POWER button. When you turn on your device for the first time, you are asked to complete a calibration process. For more information, see “Calibrate the device”. To turn off your device, press and hold the POWER button for a few seconds. A message will then be displayed, prompting you whether or not to turn off the device completely.
Manage screen settings The device’s display has three orientation modes: Portrait, Landscape (right-handed), and Landscape (left-handed). Portrait mode allows you to get a better view or a better operation of certain programs, while Landscape mode may be optimal for viewing lengthy files. Portrait mode Landscape mode • To change the orientation, tap Start > Settings > System tab > Screen, and select the orientation you want.
1.4 The Today Screen The Today screen displays important information, such as upcoming appointments and status indicators. You can tap a section on the screen to open the associated program. • To access the Today screen, tap Start > Today. • To customize the Today screen display, including the background image, tap Start > Settings > Personal tab > Today. 234 5 1 1 Tap to open the Start menu. 2 Tap to view connectivity status. 6 3 Indicates the radio signal strength.
Icon Description Icon Description There are more notifications. Tap the icon to view all.
The Start menu The Start menu, located at the top left corner of the Today screen, displays a list of programs. You can start a program by scrolling through the programs list and then pressing ENTER, or by tapping a program with the stylus. 1 Tap to switch to the Today screen. 2 Tap to start a program. The items displayed in the Start menu can be customized by tapping Start > Settings > Personal tab > Menus. 3 3 Tap to start a recently-used program.
Icon Description Comm Manager Allows you to manage the device’s connection (including Wi-Fi, Bluetooth, and ActiveSync), disconnect data services (such as GPRS), turn the phone on or off, switch to ringer/ vibration mode, and enable or disable the Direct Push function. Contacts Allows you to keep track of your friends and colleagues. Download Agent Provides information about the download status and the downloaded content from the Internet.
Icon Description STK (SIM Tool Kit) Service Allows you to access information and other services offered by your wireless service provider. Streaming Media Allows you to stream live or on-demand video. Tasks Allows you to keep track of your tasks. Terminal Services Client Allows you to log on a PC running Terminal Services or Remote Desktop, and use all of the programs available on that PC from your mobile device.
1.6 Device Settings You can adjust the device settings to suit the way you work. To see all available settings, tap Start > Settings, then tap the Personal, System, and Connections tabs located at the bottom of the screen. Personal tab Icon Description Buttons Assigns a program to a hardware button. Input Sets options for each of the input methods. Lock Sets a password for your device. Menus Sets what programs will appear in the Start menu.
System tab Icon Description About Allows you to specify a name for your device. Also shows the Windows Mobile version and copyright information. Backlight Sets the backlight timeout and brightness. Certificates Shows information about certificates that are installed on your device. Clear Storage Removes all your data and files from the memory and resets your device to factory default settings.
Connections tab Icon Description Beam Enables your device to receive incoming infrared and Bluetooth beams. Bluetooth Turns Bluetooth on, sets your device to discoverable mode, and allows you to scan for other Bluetooth devices. Connections Sets up one or more types of modem connections for your device, such as phone dial-up, GPRS, Bluetooth, and more, so that your device can connect to the Internet or a private local network.
| Getting Started
Chapter 2 Entering and Searching Information 2.1 Using the Hardware Keyboard 2.2 Input Methods 2.3 Using On-screen Keyboard 2.4 Using Letter Recognizer 2.5 Using Block Recognizer 2.6 Using Transcriber 2.7 Using Symbol Pad 2.8 Using Notes to Draw, Write, and Record Voice Notes 2.
2.1 Using the Hardware Keyboard Your device provides you with a QWERTY keyboard, which is similar to a standard keyboard on your PC. To use the QWERTY keyboard, slide the screen panel to the right to reveal the keyboard. You can do the following with the QWERTY keyboard: • To type lowercase letters, press the keys using your thumbs or fingers. • To use all uppercase letters, press first, then press back to all lowercase letters, press these buttons again.
2.2 Input Methods When you start a program or select a field that requires text or numbers, the Input Panel automatically becomes available. The Input Panel provides access to the various input methods available on your device, including Block Recognizer, Keyboard, Letter Recognizer, Symbol Pad, and Transcriber. By default, the Input Panel icon appears on the menu bar to indicate which input method is currently selected.
2.3 Using On-screen Keyboard The on-screen Keyboard is available when text entry is possible. You can enter text by tapping keys on the keyboard that are displayed on the screen. To enter text using the on-screen Keyboard 1. In a program, tap the Input Selector arrow, and tap Keyboard. 2. Enter text by tapping keys on the on-screen Keyboard. To enlarge the on-screen Keyboard 1. Tap the Input Selector arrow, then tap Options. 2. In the Input method list, select Keyboard. 3. Tap Large keys. 2.
2.5 Using Block Recognizer With Block Recognizer, you use a single stroke to write letters, numbers, symbols, and punctuation, which are then converted into typed text. To use Block Recognizer 1. From a program, tap the Input Selector arrow, and tap Block Recognizer. 2. Write characters, numbers, and symbols in the designated writing area. • Enter letters by writing in the abc (left) area of the box. • Enter numbers by writing in the 123 (right) area of the box.
To write using Transcriber 1. In a program, position the cursor where you want text to appear. 2. Use the stylus to write anywhere on the screen. The handwriting will be converted to text shortly after you lift the stylus from the screen. To enter punctuation and symbols Transcriber comes with an on-screen keyboard that provides an easy way to add punctuation or a special symbol to existing text. • From a program, tap on the Transcriber toolbar.
2.7 Using Symbol Pad Symbol Pad provides a comprehensive list of common symbols such as parentheses, braces, currency signs, and more, as well as punctuation marks and special characters. Tap a symbol to select it. When using the Navigation Control or the hardware keyboard, press UP, DOWN, LEFT, or RIGHT to navigate through the available symbols on-screen, then press ENTER to select a symbol. Tap to display the previous page of symbols. Tap to display the next page of symbols.
2.8 Using Notes to Draw, Write, and Record Voice Notes Using Notes, you can draw directly on the screen, or write on the screen and save notes in your own handwriting. You can also create a stand-alone recording (voice note) or you can add a recording to a note. For more information on what you can do with Notes, see “Notes” in Chapter 7. 2.9 Searching Information You can search for files and other items stored in My Documents folder or on an installed storage card of your device.
Chapter 3 Using Phone Features 3.1 Using the Phone 3.2 Making a Call 3.3 Receiving a Call 3.4 Making a Video Call 3.5 Receiving a Video Call 3.6 Smart Dialing 3.7 In-call Options 3.
3.1 Using the Phone Like a standard mobile phone, you can use your device to make, receive, and keep track of calls and send SMS/MMS messages. You can also dial directly from Contacts, and easily copy phonebook entries from your SIM card to Contacts on your device. The Phone screen From the Phone screen, you can access Call History, Speed Dial, and Phone settings. To open the Phone screen, do one of the following: • Tap Phone on the Today screen. • Tap Start > Phone.
• Tap the Comm Manager icon ( ) on the Today screen. On the Comm Manager screen, tap the Phone button to turn off the phone function. To resume call function, turn on the phone function by tapping the Phone button again on the Comm Manager screen. • Tap the Signal icon ( ) then tap Turn on flight mode. This disables all wireless radios on your device, which include the phone function, Bluetooth, and Wi-Fi. To resume call function, tap the Signal icon again then tap Turn off flight mode.
Notes • To adjust the conversation phone volume, you must do it during a call. Adjusting the volume at another time will affect the ring, notification, and MP3 sound levels. • When you activate Vibrate mode, sound will automatically be muted and your device will vibrate when an incoming call is received. The ) will appear in the title bar to indicate that Vibrate Vibrate icon ( mode is activated. 3.
Make a call from Contacts Tap Contacts or Start > Contacts on the Today screen, and do one of the following: • Press NAVIGATION up or down to select a contact, and press TALK twice (once to send the number to the Phone keypad, and once to dial the number). • Tap the desired contact in the contacts list, and tap the phone number that you want to call. • Tap and hold the desired contact, and on the shortcut menu, tap Call Work, Call Home, or Call Mobile.
To create a Speed Dial entry 1. On the Phone screen, tap Speed Dial. 2. Tap Menu > New. 3. Tap a contact. Select the phone number that you want to add to Speed Dial. 4. In the Location box, select an available location for the new Speed Dial entry. Note Location 1 is generally reserved for your voice mail, and Speed Dial will designate the next available location by default.
3.3 Receiving a Call When you receive a phone call, a message will appear, giving you the option to either answer or ignore the incoming call. To answer or reject an incoming call • To answer the call, tap Answer, or press TALK on the device. • To reject the call, tap Ignore, or press END on the device. To end a call Once an incoming or outgoing call is in progress, you can tap End or press END on the device to hang up. 3.
Change Video Call settings While on a video call, you can change certain settings such as the size of the image, brightness of the image, the camera to use, and more. The following shows the Video Call screen and control buttons during an ongoing call. 1 2 3 4 46 5 6 7 8 1 Status area. Displays your service provider name, the other party's information, and call timer. 2 Image display area. Displays your image and the other party's image, depending on the selected Swap Image setting.
Swap Image options Both parties (My video small) The other party's image is large while your image is small. This is the default setting. Both parties (My video large) The other party's image is small while your image is large. Both parties (equal) Both your image and the other party appear the same size. Other party only Only the other party's image is displayed. Set up video call options On the Phone screen, or on the screen of the ongoing video call, tap Menu > Video Call Options.
• Custom image. Lets you use an image from file as your display picture. When this option is selected, the File Name box and the Browse button will be enabled, allowing you to select an image file. • Last video frame. Uses the last video frame before you stopped the camera as your display image. • Video screen preference.
3.5 Receiving a Video Call To answer or reject an incoming video call • To answer the video call, tap Answer, or press the VIDEO CALL ( ) button. • To reject the video call, tap Ignore, or press END on your device. To end a video call Once an incoming or outgoing video call is in progress, you can press END on your device, or tap End to hang up. 3.6 Smart Dialing Smart Dialing is a program that makes it easy for you to dial a phone number.
Tap to minimize or expand the Smart Dialing panel Portrait view with minimized Smart Dialing panel Landscape view with expanded Smart Dialing panel When you use the hardware keyboard to dial a number, the digits entered will be displayed on the right side of the entry box and the equivalent letters will appear on the left side. Whereas tapping the Phone keypad will display only the digits in the entry box.
Tips on using Smart Dialing Smart Dialing starts looking for numbers or contacts that match the sequence you have entered. Below are some tips on how to use Smart Dialing to quickly find a desired phone number or contact. To find a phone number • Simply enter the first one or two digits to find a phone number in Call History. • Enter the first three digits or more if you want to find a phone number from the saved contacts on your device and SIM card.
4. Do one of the following: • When the correct contact is selected, tap Talk or press the ) to make a voice call. TALK button ( • To make a video call, tap Video or press the VIDEO CALL button ( ). • To call a different phone number associated with the selected contact, tap and hold the selected contact, and tap the phone number you want to call.
Smart dialing options • Select the Automatically expand selected contact check box to enable a contact’s name and phone number to be displayed when the contact is selected in the matching list. • Select the Enable drag-scroll check box to scroll in the matched list by dragging. • Select the Enable double-click for dialing check box to make a voice call by double-clicking the item in the matched list.
3.7 In-call Options To put a call on hold Your device notifies you when you have another incoming call, and gives you the choice of rejecting or accepting the call. If you are already on a call and accept the new call, you can choose to switch between the two callers, or set up a conference call between all three parties. 1. Tap Answer to take the second call, and put the first one on hold. 2. To end the second call and return to the first call, tap End or press END on the device.
To mute a call You can turn off the microphone during a call, so that you can hear the caller but the caller cannot hear you. • During a call, tap Mute. • When the microphone is turned off, the mute icon ( ) appears on the screen. Tap Unmute to turn on the microphone again. 3.8 Additional Dialing Information Make an emergency call • Tip Enter the international emergency number for your locale, and tap Talk. Additional emergency numbers may be included in your SIM card.
| Using Phone Features
Chapter 4 Synchronizing Information and Setting Up E-mail Security 4.1 Setting Up ActiveSync 4.2 Synchronizing Information 4.3 Synchronizing via Infrared and Bluetooth 4.4 Synchronizing Music, Video, and Pictures 4.
4.1 Setting Up ActiveSync ActiveSync synchronizes information on your device with information on your PC, such as Outlook content. ActiveSync can also synchronize over a wireless or cellular network with Microsoft Exchange Server, if your company or service provider is running Microsoft Exchange Server with Exchange ActiveSync.
4. If you want to synchronize your device with Exchange Server, select the Synchronize directly with a server running Microsoft Exchange Server check box, then click Next. 5. On the Exchange server credentials screen, enter the Exchange server address, your user name and password, and the domain name. If you do not know the Exchange server address and the domain name, check with your network administrator, or do the following to find them in your computer: • In Outlook, click Tools > E-mail Accounts.
• To check the domain name, click Start > Settings > Control Panel, then double-click System. • In the System Properties dialog box, click the Computer Name tab. You will then see the domain name. 6. On your device, you also need to enter the Exchange server settings. For information about this, see “Synchronizing directly with Exchange Server.” 7. On the Synchronization Setup Wizard, click Next. 8.
and computer. If you want to synchronize your device with both your computer and Exchange Server, do the following: • For the Contacts, Calendar, E-mail, and Tasks items, choose whether to synchronize them with the computer or with the Exchange Server. These items cannot be synchronized to both. • Select the check boxes of the other information types if you want to synchronize them with your computer. Information types on the PC and Exchange Server 9. Click Next. 10.Click Finish.
4.2 Synchronizing Information When you connect your device to the PC using a USB cable, an infrared connection, or a Bluetooth connection, ActiveSync will immediately synchronize. While your device is connected, ActiveSync synchronizes every time you make a change on either the PC or your device. To manually start and stop synchronization 1.
Location PC1 PC2 Pocket PC Phone Note New state All Outlook contacts and calendar appointments that were on PC2 are now also on PC1. All Outlook contacts and calendar appointments that were on PC1 are now also on PC2. All Outlook contacts and calendar appointments from both PC1 and PC2 are on your device. Outlook e-mail can be synchronized with only one computer.
Synchronize Outlook information with Exchange Server You can set up synchronization with Exchange Server on your device, if it is available to you through your company or wireless service provider. However, you should first gather information, such as Exchange Server name, domain name, your user name, and password, and then carry on with the steps. (For information about how to check the Exchange server name and domain on your PC, see “To install and set up ActiveSync on the computer.
To receive e-mails and synchronize other information instantly The Direct Push technology (Push E-Mail feature) enables you to receive new e-mails on your device as soon as they arrive in your Inbox on the Exchange Server. With this feature, items such as contacts, calendar and tasks are also immediately updated onto your device when these items have been changed or new entries have been added on the Exchange Server. To make Direct Push work, you need to have a GPRS connection on your device.
Note When both the GPRS and Wi-Fi connections are turned on at the same time, the Direct Push feature will always opt for GPRS, for which you could be charged as per your network operator’s service plan. To schedule synchronization at regular time intervals You can set how often to synchronize during Peak times (which usually refer to your working hours) when e-mail volume is high, as well as Off-peak times when e-mail volume is low. 1. In ActiveSync on your device, tap Menu > Schedule. 2.
they are within close range. 4. If this is the first time you have connected to this computer via Bluetooth, you must first complete the Bluetooth wizard on your device and set up a Bluetooth partnership between your device and the computer. For more information about creating a Bluetooth partnership, see “Bluetooth partnerships” in Chapter 6. Notes • To preserve battery power, turn off Bluetooth when not in use.
To set up a sync relationship with a storage card 1. On the computer, open Windows Media Player. 2. Click the Sync tab. 3. Select the storage card. 4. Click Set up Sync. 5. Choose whether to synchronize automatically or manually. For more information about Windows Media Player on your device, see “Using Windows Media Player” in Chapter 8. 4.
Note S/MIME encryption and digital signatures for Windows Mobile-based devices are available only with Exchange Server 2003 Service Pack 2 or a later version that supports S/MIME. If you are not using one of these products, or have not yet synchronized, these options are unavailable. Digitally sign and encrypt all messages ActiveSync allows you to set up S/MIME e-mail encryption and signing. You must obtain a valid certificate to sign and encrypt e-mail messages successfully. 1.
5. Tap Choose Certificate to select a certificate for signing or encrypting outgoing e-mail messages. You can select certificates to sign or encrypt e-mail messages individually if you do not choose to sign or encrypt all outgoing e-mail. For information about signing and encrypting individual messages, see “Individually sign and encrypt a message” in Chapter 7.
Chapter 5 Managing Your Pocket PC Phone 5.1 Personalizing Your Pocket PC Phone 5.2 Adding and Removing Programs 5.3 Managing Memory 5.4 Backing Up Files 5.5 Protecting Your Pocket PC Phone 5.
5.1 Personalizing Your Pocket PC Phone Customize the Today screen The Today screen shows your upcoming appointments, active tasks, and information about incoming messages. You can customize the Today screen on your device. To customize the Today screen 1. Tap Start > Settings > Personal tab > Today. 2. On the Appearance tab, select the desired theme for the background of the Today screen. 3. On the Items tab, select the items you want to appear on the Today screen.
• • Select Next appointment to show only the next appointment in your schedule, or Upcoming appointments to show multiple appointments. Clear the Display all day events check box if you do not want to display all-day events. To set options for displaying tasks on the Today screen If you have a large number of tasks, you may want to specify the kind of tasks that are displayed on the Today screen. 1. Tap Start > Settings > Personal tab > Today. 2. Tap the Items tab. 3. Select Tasks and tap Options. 4.
Note If you synchronize multiple devices with the same PC, each device must have a unique name. To change the device name 1. Tap Start > Settings > System tab > About. 2. Tap the Device ID tab. 3. Enter a name. Note The device name must begin with a letter, consist of letters from A to Z, numbers from 0 to 9, and cannot contain spaces. Use the underscore character to separate words.
To set the time and date for a different location If you visit or communicate with someone in a particular time zone often, you can select it as your visiting time zone. 1. Tap Start > Settings > System tab > Clock & Alarms > Time tab. 2. Tap Visiting. 3. Select the correct time zone and change the time or date. To change language and regional settings The style in which numbers, currency, dates, and times are displayed is specified in regional settings. 1.
To increase or decrease the size of text on the screen 1. Tap Start > Settings > System tab > Screen > Text Size tab. 2. Move the slider to increase or decrease the text size. To choose how to be notified about events or actions 1. Tap Start > Settings > Personal tab > Sounds & Notifications. 2. On the Sounds tab, choose how you want to be notified by selecting the appropriate check boxes. 3.
The Version tab displays important device information, including the type of processor and the amount of memory that is installed. To make the battery last longer • Tap on the Today screen. On the Advanced tab of the Power settings screen, you can specify when your device turns off to conserve battery power. For optimum conservation, specify 3 minutes or less.
To change the ring tone 1. On the Phone screen, tap Menu > Options > Phone tab. 2. In the Ring tone list, tap the sound you want to use. Tip To use custom *.wav, *.mid, *.mp3, or *.wma files as ring tones, use ActiveSync on your PC to copy the files to the /Windows/Rings folder on your device. Next, select the sound from the Ring tone list. For more information about copying files to your device, see ActiveSync Help on your PC.
Networks You can view available mobile phone networks, determine the order in which your device accesses another network if the current one is unavailable, and specify whether you want to change networks manually or automatically. For more information about network settings, see Help on your device. To change phone network settings 1. Tap Start > Settings > Personal tab > Phone > Network tab. 2. By default, your device displays the current network as offered by your service provider.
To add programs 1. Download the program to your PC (or insert the CD or disk that contains the program into your PC). You may see a single *.exe file, a *.zip file, a Setup.exe file, or several versions of files for different device types and processors. Be sure to select a program designed for your device and processor type. 2. Read any installation instructions or documentation that comes with the program. Many programs provide special installation instructions. 3. Connect your device to the PC. 4.
5.3 Managing Memory You may need to stop a program if it becomes unstable or the program memory is low. To see how much memory is available • Tap Start > Settings > System tab > Memory. • On the Main tab, the amount of memory allocated to file and data storage versus program storage is displayed, as well as the amount of memory in use versus the available memory. To see available storage card memory You can see how much memory is available on a storage card that is inserted in your device. 1.
To close a program In most cases, programs automatically close to free needed memory, however, you can close programs manually, if you prefer. 1. Tap Start > Settings > System tab > Memory > Running Programs tab. 2. In the Running Programs list, tap the program you want to close, and tap Stop. Tip In most programs, you can also use the keyboard shortcut CTRL+Q to close the program. 5.
To copy a file between your device and the PC 1. Connect your device to the PC. 2. In ActiveSync, click Explore, which opens the Mobile Device folder of your device. 3. To copy a file from your device to your PC: • In the Mobile Device folder, go to the file that you want to copy. • Right-click the file, then click Copy. • Locate the destination folder on your PC. Right-click the folder, then click Paste. 4.
5.5 Protecting Your Pocket PC Phone There are two kinds of protection that you can set for your device: • You can protect your SIM card from unauthorized use by assigning a PIN (personal identification number). Your first PIN will be given to you by your wireless service provider; you can change the PIN later. • Additionally, you can prevent unauthorized access to any part of the device by using password protection.
Notes • Each time a wrong password is entered, the device response time gets longer until the device appears to be not responding. • If you forget your password, you must follow the instructions in this user manual to clear the memory before you can access your device. To change your password 1. Tap Start > Settings > Personal tab > Lock. You will be prompted to enter your current password. 2. In the Password box, enter your new password. 3.
5.6 Resetting Your Pocket PC Phone Occasionally, you may need to reset your device. A normal (or soft) reset of your device clears all active program memory and shuts down all active programs. This can be useful when your device is running slower than normal, or a program is not performing properly. A soft reset is also necessary after the installation of some programs. If a soft reset is performed when programs are running, unsaved work will be lost.
To perform a hard reset Press and hold the Left SOFT KEY and the Right SOFT KEY, and at the same time, use the stylus to press the RESET button at the bottom of your device. Left SOFT KEY Right SOFT KEY Warning! Always turn off your device before performing a hard reset. Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.
| Managing Your Pocket PC Phone
Chapter 6 Getting Connected 6.1 Connecting to the Internet 6.2 Internet Explorer 6.3 Using Comm Manager 6.4 Using Bluetooth 6.5 Using Wi-Fi 6.6 Using Wireless Modem 6.
6.1 Connecting to the Internet Your device is equipped with powerful networking functions that enable you to connect to the Internet through Wi-Fi, GPRS (General Packet Radio Service) or the mobile phone network Connecting your device to the Internet through a private or free wireless network is your best choice since this will not incur any cost. Take note, however, that using Wi-Fi on your device will drain battery power faster.
3. On the Make New Connection screen, enter a name for the connection. 4. In the Select a modem list, select Cellular Line (GPRS, 3G), then tap Next. 5. Enter the Access point name, then tap Next. 6. Enter the user name and password, only if required. 7. Tap Finish.
Notes • To view help information for any screen, tap the help icon ( ). • To modify your connection settings, tap Manage existing connections on the Connections screen, and complete the connection wizard. To set up a dial-up connection to your ISP When you use your device to dial up to your ISP and connect to the Internet, you will be billed by the number of minutes that you use.
Note To start browsing the Internet or private network, tap Start > Programs > Internet Explorer. To set up a network card You can insert and use a network card on your device to connect directly to a local area network (LAN) at your home or workplace. Once connected, you can view the Internet or intranet, or download e-mail on your device. Ensure you purchase and configure a network card that is compatible with your device. 1. Insert the network card into your device. 2.
6.2 Internet Explorer Internet Explorer is a full-featured Internet browser, optimized for use on your device. To start Internet Explorer • Tap Start > Internet Explorer or press the INTERNET EXPLORER button on your device. To set a Home page 1. In the address bar on top of the Internet Explorer screen, enter the desired Web page address. Tap to open the Web page. 2. Tap Menu > Tools > Options > General tab. 3. Do one of the following: Tip • To use the displayed page as the Home page, tap Use Current.
To delete a favorite or folder 1. In Internet Explorer Mobile, tap Menu > Favorites > Add/Delete tab. 2. Select the item you want to delete, and tap Delete. To change the size of text on Web pages • In Internet Explorer Mobile, tap Menu > Zoom, and tap the size you want. To change how Web pages fill the screen 1. In Internet Explorer Mobile, tap Menu > View. 2. Tap one of the following: • One Column. Arranges the content into one column that is as wide as the screen.
To delete temporary Internet files Your device temporarily stores Web pages that you frequently visit or have visited recently to speed up the display of these Web pages when you access them. You may want to delete these files to free storage space. 1. In Internet Explorer Mobile, tap Menu > Tools > Options > Memory tab. 2. Tap Delete Files. All pages stored on your device, including offline favorites content, will be deleted.
1 5 2 6 3 7 4 Comm Manager screen 1 Tap to toggle between enabling or disabling the phone. 2 Tap to toggle between turning on or off Wi-Fi. Tap Settings > Wi-Fi Settings to configure Wi-Fi on your device. See "Using Wi-Fi" for details. 3 Tap to disconnect active data services (e.g. GPRS). You cannot reconnect data services in Comm Manager. 4 Tap to open ActiveSync so you can synchronize the device and computer.
6.4 Using Bluetooth Bluetooth is a short-range wireless communications technology. Devices with Bluetooth capabilities can exchange information over a distance of about 10 meters without requiring a physical connection. You can even beam information to a device in a different room, as long as it is within the Bluetooth signal coverage range.
Note By default, Bluetooth is turned off. If you turn it on, then turn off your device, Bluetooth also turns off. When you turn on your device again, Bluetooth automatically turns on. To turn Bluetooth on and make your device discoverable 1. On your device, tap Start > Settings > Connections tab > Bluetooth. 2. Select the Turn on Bluetooth and Make this device discoverable to other devices check boxes. 3. Tap OK.
8. The name of the paired device is then displayed. You may edit and enter a new name for that device. 9. Select the check boxes of services that you want to use from the paired device. 10. Tap Finish. To accept a Bluetooth partnership 1. Ensure that Bluetooth is turned on and in discoverable mode. 2. Tap Yes when prompted to establish a partnership with the other device. 3. Enter a passkey (the same passkey that is entered on the device requesting the partnership) to establish a secure connection.
