HTC Fetch BL A100 User Guide http://www.htc.
Trademarks and copyrights © 2013 HTC Corporation. All rights reserved. HTC, the HTC logo, and HTC Fetch are trademarks of HTC Corporation. All other trademarks included herein are the property of their respective owners. The Bluetooth and Bluetooth Smart word mark and logos are trademarks owned by Bluetooth SIG, Inc. Google and Google Maps are trademarks of Google Inc. Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
Your HTC Fetch is a Bluetooth® Smart device that helps you to easily locate your misplaced phone or find valuables you attached an HTC Fetch to with your phone. keychain loop multifunction button speaker LED back cover notch IMPORTANT: Signal strength varies depending on your environment. When indoors, effective range may be less than the maximum range.
English Removing the battery film Before using HTC Fetch, you’ll need to remove the battery film. 1. Open the back cover from the notch on the edge. 2. Remove the battery and film. 3. Reinsert the battery. When the battery is inserted, HTC Fetch will power on automatically. 4. Align the back cover hooks and press the back cover until it clicks in place.
You can connect up to three HTC Fetch devices to certain HTC phones that are Bluetooth Smart Ready. 1. Turn on your HTC Fetch. (See Using HTC Fetch) 2. On your phone, turn on Bluetooth. 3. Do one of the following: • On HTC phones with Android OS Tap Bluetooth, and under “Available devices” tap HTC Fetch to pair your HTC Fetch. • On HTC phones with Windows® Phone 8 Go to the system settings and tap HTC Fetch. Then tap HTC Fetch to pair.
English Using HTC Fetch HTC Fetch has a single multifunction button that you use to turn it on and off, activate the phone alert, and more. Power on or off Press and hold for four seconds. Activate the phone alert Press once. Press again to cancel. Take a photo Press once (while using the Camera app). Notifications Power on One beep and green LED flashes (red LED flashes when battery power is less than 5%). Power off Two beeps and red LED flashes.
When you attach HTC Fetch to something (such as your keys, bag, etc), you’ll have the assurance that you’ll have a starting point to track down your lost valuables. 1. On your phone, go to the Settings and tap Bluetooth. 2. Tap next to the HTC Fetch you want to find. 3. Tap Find [name of HTC Fetch]. Tip: You can use the signal strength indicator to see if you are getting closer to your HTC Fetch. The signal strength bars are next to “Paired Bluetooth devices”.
English Replacing the battery HTC Fetch uses a standard CR2032 coin battery. The battery will last approximately six months when HTC Fetch is on stand-by. When you need to replace the battery, you’ll receive a notification on your phone. (See Removing the battery film) Tip: To check the battery power, go to the Settings and tap Bluetooth. Tap next to the HTC Fetch you want to check. The battery power information is just below “Paired Bluetooth device”.
91H0xxxx-xxM Rev.A htc.
