User Guide

Internet 167
Tap Wi-Fi settings. The
network names and security settings of
detected Wi-Fi networks are displayed in the Wi-Fi networks
section.
Tap a Wi-Fi network to connect. If you selected an open network,
you will be automatically connected to the network. If you
selected a network that is secured with WEP, enter the key and
then tap Connect.
Depending on
the network type and its security settings, you
may also need to enter more information or choose a security
certificate.
When your phone is connected to a wireless network, the Wi-Fi icon
appears in the status bar and tells you the approximate signal strength
(number of bands that light up). If Network notification in Wi-Fi
settings is enabled, this icon appears in the status bar whenever the
phone detects an available wireless network within range.
The next time your phone connects to a previously accessed secured
wireless network, you will not be prompted to enter the key or other
security information again, unless you reset your phone to its factory
default settings.
Connecting to a Wi-Fi network with EAP-TLS security
You may need to install a network certificate (.p12) to your
phone before you can connect to a Wi-Fi network with EAP-TLS
authentication protocol.
Save the certificate file to the root folder of the storage card.
Press HOME
> MENU, and then tap Settings > Security.
Tap Install from SD card.
3.
4.
1.
2.
3.