User Guide © 2009
Table of Contents Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . i Section 1: Getting Started . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1A. Setting Up Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Setting Up Your Phone . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
2C. Contacts, Calendar, and Tools . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30 Contacts . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Calendar . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Tasks . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Section 3: Device Services . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 73 3A. Device Services: The Basics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74 Voicemail . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Text Messaging (SMS) SMS Voice Messaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4C. Warranty and Other Notices . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130 Manufacturer’s Warranty . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Privacy Restrictions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Weather Disclaimer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Introduction This User Guide introduces you to all the features of your new phone. It’s divided into four sections: ⽧ Section 1: Getting Started ⽧ Section 2: Your Phone ⽧ Section 3: Device Services ⽧ Section 4: Safety Information and Other Notices Throughout this guide, you’ll find tips that highlight special shortcuts and timely reminders to help you make the most of your new phone and service. The Table of Contents and Index will also help you quickly locate specific information.
Section 1 Getting Started
Section 1A Setting Up Service ⽧ Setting Up Your Phone (page 2) ⽧ Making Your First Call (page 4) ⽧ Setting Up Your Voicemail (page 4) Setting up and activating your new phone is quick and easy. This section walks you through the necessary steps to set up your phone, activate your phone, set up your voicemail, and establish passwords.
2. Insert the battery. Align the battery’s exposed copper contacts with the battery connectors inside the battery compartment. Setting Up Service 䡲 Battery connectors 䡲 Insert the contacts side of the battery first and then gently push the battery into place. 3. Replace the back cover. Turning the Phone On for the First Time 1. Press and hold the End/Power key for a few seconds. End/Power key 2.
Making Your First Call 1. Press the Talk key to display the Phone screen. Talk Key Phone Keypad 2. Press the keys on the Phone keypad to enter the phone number. 3. Press the Talk key again to place the call. For more information about using your phone to make and receive phone calls, see “Making a Call” on page 19 and “Answering a Call” on page 20. Setting Up Your Voicemail All unanswered calls to your phone are automatically transferred to your voicemail, even if your phone is in use or turned off.
Section 2 Your Phone
Section 2A Device Basics ⽧ Your Device (page 7) ⽧ Accessories (page 10) ⽧ Features of Your Phone (page 10) ⽧ Turning Your Device On and Off (page 10) ⽧ Using Your Phone’s Battery and Charger (page 11) ⽧ The Home Screen (page 13) ⽧ Using the Getting Started Application (page 16) Using the QWERTY Keyboard (page 17) ⽧ Using XT9 mode (page 17) ⽧ Using Numeric mode (page 18) ⽧ ⽧ The Phone Screen (page 19) ⽧ Displaying Your Phone Number (page 19) Making a Call (page 19) Answering a Call (page 20
Your Device Front Panel Device Basics 16 1 15 2 14 3 13 4 12 5 11 6 10 7 9 8 1. Earpiece. Hear the caller and automated prompts. 2. Left Softkey. Press to perform the command above the selection 3. Talk Key. 䡲 Press to answer an incoming call or display the Phone screen to place a call. 䡲 Press and hold to use Voice Command. (See “Voice Command” on page 37 for details.) 4. Home Key. Press to return to the Home screen. (See “The Home Screen” on page 13 for details.) 5. Keypad.
13. End/Power Key. 䡲 Press for five seconds to turn on the phone. 䡲 Press to end a call or return to the Home screen. 䡲 Press and hold to turn off the phone. 14. Right Softkey. Press to perform the command above the selection 15. Navigation Key. Press this up, down, left, or right to move through menus and items, and then carry out the selection by pressing the Enter (center) key. 16. Notification LED. LED indicates battery charging status and notification.
Device Basics Left, Rear, and Bottom Panels 22 18 21 20 19 17. Volume Up Button. Press this button to increase the volume. 18. Volume Down Button. Press this button to decrease the volume. 19. Sync Connector/Earphone Jack. Connect the supplied USB cable to synchronize information or plug in the AC phone charger to recharge the battery. You can also connect the supplied USB stereo headset. 20. Back Cover. Remove to gain access to the battery and microSD card slot. 21. Speaker.
Accessories The product package includes the following items and accessories: 䢇 AC phone charger 䢇 USB sync cable 䢇 Mini-USB stereo headset 䢇 Battery 䢇 Multifunction audio cable 䢇 Getting Started CD 䢇 Get Started Guide Features of Your Phone The device is powerful, easy to use, and reliable, and it offers many features and service options.
Using Your Phone’s Battery and Charger Note Device Basics Your phone is equipped with a Lithium Ion (Li-Ion) battery. It allows you to recharge your battery before it is fully drained. The battery provides up to 5.3 hours of continuous digital talk time. • Long backlight settings, searching for service, vibrate mode, browser use, and other variables may reduce the battery’s talk and standby times. • Watch your phone’s battery level indicator and charge the battery before it runs out of power.
Charging the Battery Charge your battery as soon as possible so you can begin using your phone. Keeping track of your battery’s charge is important. If your battery level becomes too low, your phone automatically turns off, and you will lose any information you were just working on. For a quick check of your battery level, glance at the battery charge indicator located in the upper-right corner of your phone’s display screen.
The Home Screen Device Basics The Home screen displays status indicators and the HTC Home. The Home screen also gives you quick access to various applications and settings that you frequently use on your phone. 4 1 2 3 1. HTC Home screen (page 25) 2. Start menu (page 15) 3. Contacts (page 30) 4. Status icons (page 14) 2A.
Status Icons The following are some of the status icons that you may see on the phone.
Start Menu The Start menu, which can be opened from the lower left corner of the screen, gives you access to all the programs and settings of your Windows Mobile-powered phone. Device Basics By default, the Recent Programs screen is shown when you press Start (left softkey). To see the available programs on your phone, press All Programs (left softkey) on the Recent Programs screen. Press to show more programs. Tip You can disable the Recent Programs screen.
Using the Getting Started Application The Getting Started application is a list of “how to’s” that you can use to learn basic features and settings of your phone. To learn the basics through the Getting Started application: 1. Press Start (left softkey) > All Programs (left softkey) > Getting Started. 2. Select one of the items onscreen to learn how to do a certain task. 3. Most tutorials contain a link to the screen where you actually perform a selected task. Select the link to go to that screen.
Using the QWERTY Keyboard 䢇 To type lowercase letters, press the keys using your thumbs or fingers. 䢇 To use a single uppercase letter, press CAPS and then press the corresponding key. 䢇 To use all uppercase letters, press FN first and then press CAPS. To change back to all lowercase letters, press these buttons again. 䢇 To enter a number or symbol (labeled in green), press FN and then press the corresponding key. 䢇 To continuously enter numbers or symbols (labeled in green), press FN twice.
2. On the menu, select XT9 My Words > Add (left softkey). 3. In the Add/Edit Word box, enter the word and press Done (left softkey) To edit or delete words in the XT9 My Words list, press Menu and then select the appropriate command in the menu. To set XT9 settings Press and hold SYM and on the menu, choose XT9 Settings. In the screen, choose the options you want and press Done (left softkey). Note You must first set Predictive Text to On before you can select XT9 Settings from the menu.
The Phone Screen To display the Phone screen: Enter the phone number by pressing the keys on the keypad. Device Basics 䢇 — or — 䢇 Press the Talk key. Displaying Your Phone Number 1. Press the Talk key to display the Phone screen. 2. Press Menu (right softkey) > My Phone Number. (Your phone number and account information will be displayed.) Tip Phone screen To view information about your phone, press Menu (left softkey) > Device Information on the Phone screen.
Making a Call from Contacts 1. From the Home panel, press Contacts (right softkey) to open the Contacts screen. 2. Select the contact to call and then press the Talk key. Note If the contact has more than one number stored, press the navigation key right or left to select the number you want to call before pressing the Talk key. — or — Highlight the contact and press the Enter key to open the contact details, highlight the phone number you want to call, and then press the Talk key to place the call.
Rejecting an Incoming Call To reject the call: Press the End/Power key. To reject a call and send a text message: 䊳 To reject the call and to send a text message to the caller’s mobile phone, press Send Text (right softkey). In-Call Options To put a call on hold: Your phone notifies you when you have another incoming call, and gives you the option of rejecting or accepting the call.
To check who the caller was: 䊳 On the Home panel, press the navigation key down to select the Missed Call panel and press the Enter key. — or — On the Phone screen, press Menu (right softkey) > View > All Calls. Call History Call History shows you your incoming calls, outgoing calls, and missed calls. Call History makes redialing a number fast and easy. It is continually updated as new numbers are added to the beginning of the list and the oldest entries are removed from the bottom of the list.
䡲 Delete to remove the call entry from the Call History. 䡲 Delete List to erase all history entries. 䡲 Save to Contacts to restrict the list of entries that appear in the Call History according to the type of call. Device Basics 䡲 Filter to save the phone number to your Contacts. Speed Dial You can create speed dial entries for frequently-called numbers or frequently-accessed items so you can dial a number or access an item by pressing a single key. To create a speed dial entry for a contact 1.
Turning the Phone On and Off In many countries, you are required by law to turn off the phone while on board an aircraft. Enabling or Disabling the Phone 1. On the Home panel, press the navigation key down to select the Settings tab, press the navigation key right to select Comm Manager, and then press the Enter key. — or — On the Home panel, press Start (left softkey) > All Programs (left softkey) > Comm Manager. 2.
Section 2B ⽧ Using HTC Home (page 25) ⽧ Home (page 25) ⽧ Appointments (page 26) ⽧ Missed Calls (page 26) ⽧ Messages (page 26) ⽧ Email (page 27) ⽧ Weather (page 27) ⽧ Internet Explorer (page 28) ⽧ Getting Started (page 29) ⽧ Settings (page 29) HTC Home HTC Home Using HTC Home Navigate through the items on the HTC Home by pressing the navigation key up or down.
Missed Calls Displays your missed calls and voicemail messages. Press Call History (right softkey) to view all incoming and outgoing calls. Note A different icon is shown if there is no picture associated with the contact. Appointments Lets you see your upcoming appointments for the day or set a new appointment. If you have more than one appointment for the day, press the navigation key right to go through the appointments. Press Today (right softkey) to view the Calendar.
Email HTC Home View snippets of your unread email messages or create a new email message. Press the Enter key to open the full email message or create a new email message. Press Inbox (right softkey) to view all email messages. Tip Press the navigation key left or right to go through your unread email messages. Weather View the weather conditions of a selected city. Adding a City The Weather tab can display weather information of your local city and other added cities.
To view the weather forecast for the next five days 䊳 To see the weather information for the next five days of the week, press the Enter key. To change the temperature scale 1. On the Forecast screen, press Menu (right softkey) > Options. 2. Scroll to Temperature Scale and select Celsius or Fahrenheit. Choosing Download Options 1. On the Forecast screen, press Menu (right softkey) > Options. 2. You can choose from the following options: 䡲 Download weather data automatically.
Settings HTC Home Lets you quickly access the Comm Manager and Task Manager and change your profile, wallpaper, or ring tone. Press All Settings (right softkey) to access all the settings of your phone. (See “Changing Basic Settings” on page 59 for details.) Getting Started Press the navigation key right or left to go through the available tutorials to learn basic features and settings of your phone. Press the Enter key to view the selected tutorial.
Section 2C Contacts, Calendar, and Tools ⽧ Contacts (page 30) ⽧ Calendar (page 32) ⽧ Tasks (page 34) ⽧ Tasks (page 34) ⽧ Comm Manager (page 35) ⽧ Adobe Reader LE (page 36) ⽧ Microsoft Office Mobile (page 36) ⽧ Voice Command (page 37) ⽧ Voice Recorder (page 38) Your phone is equipped with several personal information management features that help you manage your busy lifestyle.
If someone who is not in your list of contacts calls you or sends you a message, you can quickly create a contact from Call History or from the message by pressing Menu (right softkey) > Save to Contacts. Contacts, Calendar, and Tools Tips Managing Contacts To view and edit contact information: 1. From the Home panel, press Contacts (right softkey). 2. Select the contact whose information you want to view or edit and press Menu (right softkey) > Edit. 3.
Calendar Use Calendar to schedule appointments, including meetings and other events. If you use Outlook on your computer, you can synchronize appointments between your phone and computer. This section shows you how to create a new appointment, change calendar views and send meeting requests. To open the Calendar screen: 䊳 From the Home panel, press the navigation key down to select the Appointments tab and press the Enter key. – or – Press Start (left softkey) > All Programs (left softkey) > Calendar.
Viewing Appointments Contacts, Calendar, and Tools You can view your schedule in three different views: Month, Week, and Agenda. To view your schedule 1. Open the Calendar screen. 2. Press the left softkey or press Menu (right softkey) and choose the view you want. 1 2 4 3 Agenda view 1. The highlighted hours indicate the time of your appointments. 2. Select an appointment to view details about the appointment. 3.
Notes • You can specify if an attendee is required or optional only if your phone is connected to a Microsoft Exchange 2007 server. Otherwise, all attendees are designated as required. For more information, see “Managing Meeting Requests” on page 104. • To remove an attendee from the list, select the attendee and press Menu (right softkey) > Remove Attendee. • When attendees accept your meeting request, the meeting is automatically added to their schedules.
To mark a task as completed 2. Select the task, and press Complete (left softkey). Comm Manager Comm Manager is a central location where you can easily turn on and off the communication features of your phone such as the phone, data connection, Bluetooth, and more. To access the Comm Manager: Do one of the following: 䊳 From the Home panel, press the navigation key down to select the Settings tab, and then press the navigation key right to select Comm Manager. Press Enter to open the Comm Manager.
Adobe Reader LE Adobe® Reader® LE lets you view Portable Document Format (PDF) files. When you open a password-protected PDF file, you will be prompted to enter the password before the file can be opened. To open a PDF file on your phone 1. From the Home panel press Start (left softkey) > All Programs (left softkey) > Adobe Reader LE. 2. Press Open (left softkey). 3. Browse to a folder, highlight the PDF file you want to open, and press the Enter key.
Your phone’s built-in Voice Command lets you make phone calls, open programs, play back music, get calendar information, and more, just by using your voice. It only responds to a set of predefined commands and does not allow you to record your own commands. This section gives a few examples on how to use Voice Command. For more information, see Voice Command help on the phone.
To request information from your calendar: 1. Press and hold the Talk key until the microphone icon ( ) appears on the title bar. 2. In a clear voice, ask for the information you want to retrieve. For example, say: “What’s my next appointment?” “What’s my next meeting?” “What’s my schedule tomorrow?” To request for date and time: 1. Press and hold the Talk key until the microphone icon ( ) appears on the title bar. 2.
Section 2D ⽧ Taking Photos and Videos (page 39) ⽧ Viewing Photos and Videos (page 44) ⽧ Using Windows Media Player Mobile (page 46) ⽧ Using Audio Booster (page 50) ⽧ Using MP3 Trimmer (page 51) Camera and Multimedia Camera and Multimedia Taking Photos and Videos Use your phone’s built-in camera to take photos and record video clips. To launch the camera: 䊳 From the Home panel, press Start (left softkey) > All Programs (left softkey) > Camera or Video Recorder. – or – Press the Camera key .
Supported File Formats Using the available capture modes, the camera in your phone captures files in the following formats: Capture mode Format Photo / Contacts Picture / Picture Theme / Panorama JPEG Video H.263 (.3gp); MPEG-4 (.mp4); 3GPP2 (.3g2) Taking a Photo or Capturing a Video Clip Aim the camera at the subject and then press the Enter key to take the shot. When capturing video, press Enter to start recording; press it again to stop.
6. Recording indicator. Flashes when recording a video. Camera and Multimedia 6 7. Progress indicator. In Picture Theme and Panorama modes, this shows the current and total number of shots for the selected template or mode. The Review Screen 7 After capturing a photo or video, you will be presented with options that you can do with the captured media file. Contacts Picture mode Press To Navigation key up View the image in camera Album or play back the video in Windows Media Player.
Using Zoom Before capturing a still image or a video clip, you can first zoom in to make the object in focus move closer, and you can zoom out to make the object move farther away. In all capture modes, press the navigation key up on your phone to zoom in, the navigation key down to zoom out. The camera zoom range for a picture or video depends on the capture mode and capture size. Also, please note the capture sizes available for certain capture formats also vary from one capture mode to another.
Record with Audio (Video and MMS Video modes only) Allows you to Select On to record audio while capturing video clips. This is selected On by default. If you select Off and then capture a video clip, it will have no audio. Keep Backlight Choose whether to turn the backlight on or off while using the camera. This overrides your phone backlight settings while you are using the camera. Shutter Sound Choose whether you want the camera to make a shutter sound when you take photos or record video clips.
Viewing Photos and Videos Album offers a host of features that let you rotate images, view your images as a slideshow, use images as contact pictures, and more. Notes • Album can only display files using the JPEG, MPEG4 or H.263 file formats. • You can also view pictures and videos using the Pictures & Videos program. From the Home panel, press Start (left softkey) > All Programs (left softkey) > Pictures & Videos.
To set an image as the Home screen wallpaper: 1. On the main Album screen, select the image you want to set as the Home screen wallpaper. Note Camera and Multimedia 2. Click Menu > Set as Home Screen. To return the Home screen wallpaper to the default image, from the Home screen, press Start (left softkey) > All Programs (left softkey) > Settings > Home Screen. Scroll to Background image, and select Default.
Using Windows Media Player Mobile Windows Media® Player Mobile for Smartphones plays digital audio and video files that are stored on your phone or on a network, such as on a website. This section shows you how to use Windows Media Player Mobile. To open Windows Media Player Mobile: 䊳 Press Start (left softkey) > All Programs (left softkey) > Windows Media. Supported File Formats Video File Formats Supported Windows Media Video MPEG4 Simple Profile H.263 H.
To Press Play or pause Enter Skip to a previous file Navigation left Skip to the next file Navigation right Increase the volume Navigation up Decrease the volume Navigation down Turn the sound on or off (mute) # Switch to full screen during video playback 0 Change rating * Fast-forward a file Navigation right (hold) Rewind a file Navigation left (hold) Camera and Multimedia About the Controls Windows Media Player Mobile has three primary screens: 䢇 Playback screen.
Synchronizing Video and Audio Files Use the latest version of Windows Media Player on your computer to synchronize digital media files from your computer to your phone. This ensures that protected files and album art (for skins) are copied to your phone correctly. Synchronizing Content to Your Device Automatically 1. On your computer, open Windows Media Player, and then connect your phone to your computer. 2. In the Device Setup Wizard, select Yes, search my computer now.
4. Press Start Sync to start synchronizing the selected files to your phone. • Use Windows Media Player 11 or higher on your computer to synchronize media files to your phone. • Audio files copy faster if Windows Media Player is configured to automatically set the quality level for audio files copied to your phone. For more information, see the Windows Media Player Help. Playing Media Use the Library to find and play songs, videos, and playlists that are stored on your phone or microSD card. 1.
Using Audio Booster Audio Booster optimizes sound for a better listening experience. It provides preset moods, such as hip-hop, jazz, and rock, and several enhancement presets that suit different types of music. To access Audio Booster: 䊳 Press Start (left softkey) > All Programs (left softkey) > Audio Booster. Note You must plug in the headset first onto the earphone jack of your phone before you can open the program.
Using MP3 Trimmer 2 1 6 3 5 Camera and Multimedia Use MP3 Trimmer to trim MP3 files. You can choose to save a trimmed file as a new file or set it as a ring tone. 4 1. Shows the title of the MP3 file. 2. Shows the duration of the trimmed portion. 3. Shows the elapsed playback time. 4. Shows the current start and end points of the song. The song will be trimmed based on these points. 5.
Section 2E Bluetooth ⽧ Using Bluetooth (page 52) ⽧ Printing Files via Bluetooth (page 55) Your phone features built-in Bluetooth technology, allowing you to share information more easily than ever before. Bluetooth is a short-range communications technology that allows you to connect wirelessly to a number of Bluetooth devices, such as headsets and hands-free car kits, and Bluetooth-enabled handhelds, computers, printers, and wireless phones.
Turning Off Bluetooth Visibility After a Certain Period of Time You can automatically turn off Bluetooth visibility after a specified period of time. 1. From the Home panel, press Start (left softkey) > All Programs (left softkey) > Settings > Connections > Bluetooth > Visibility Timeout. Bluetooth 2. In Visibility Timeout, select the time before your phone’s Bluetooth visibility turns off. 3. Press Done.
Connecting a Bluetooth Hands-free or Stereo Headset For hands-free phone conversations, you can use a Bluetooth hands-free headset such as a car kit with your phone. Your phone also supports A2DP (Advanced Audio Distribution Profile) which allows you to use a Bluetooth stereo headset for hands-free phone conversations and for listening to stereo music. To connect a Bluetooth hands-free or stereo headset: 1.
8. On your phone, select an item to beam. The item can be an a task, a contact card, or a file. Note Not all file types can be sent via Bluetooth. Bluetooth 9. To beam a contact, press Menu (right softkey) > Send Contact > Beam. To beam other types of information, press Menu (right softkey) > Beam [type of item]. 10. Select the device name to which you want to send the item. 11.
Section 2F microSD Card ⽧ Using a microSD Card on Your Phone (page 56) ⽧ Managing the microSD Card (page 56) ⽧ Using Your Device as a USB Drive (page 57) Your phone lets you insert a microSD™ card to expand the available storage space. This highly secure digital card enables you to exchange images, music, and other data between SD-compatible devices, and also provides additional storage space on your phone. Using a microSD Card on Your Phone Note A microSD card is not included in the box.
Encrypting files on your microSD card: You can set your phone to encrypt files as they are saved on the microSD card. Press Start (left softkey) > All Programs (left softkey) > Settings > Security > Encryption and select Encrypt files placed on storage cards. Notes microSD Card 䊳 • Encrypted files can only be read on the device that encrypted them. • Encrypted files are opened just like other files, provided you are using the device that encrypted them.
Section 2G Managing Your Device ⽧ Copying and Managing Files (page 58) ⽧ Changing Basic Settings (page 59) ⽧ Using Task Manager (page 63) ⽧ Protecting Your Device (page 63) ⽧ Managing Memory (page 64) ⽧ Adding and Removing Programs (page 64) ⽧ Resetting Your Device (page 64) ⽧ Windows Update (page 65) You can customize your phone to sound, look, and operate just the way you want it to. This section describes how to customize your phone to best suit your needs.
Changing Basic Settings Managing Your Device Date and Time To set the date and time: 1. From the Home panel, press the Enter key. 2. Click Date and Time and then set the Time zone, Date, and Time. 3. Click Done. Note During synchronization, the time on your phone is updated with the time on your computer. Regional Settings The style in which numbers, currency, dates, and times are displayed is specified in regional settings. 1.
Notes • The device name must begin with a letter, consist of letters from A to Z, numbers from 0 to 9, and cannot contain spaces. Use the underscore character to separate words. • If you enroll your phone to your company’s domain, the device name will be changed to be the same as the one used to enroll the phone. Ringer Settings To change the ring type and ring tone : 1. From the Home panel, scroll down to the Settings item. 2.
To edit a profile 1. From the Home panel, scroll to the Settings item and then press the Enter key (option should be Profile). 3. Modify the settings and press Done (left softkey). To cancel without saving the changes, press Cancel (right softkey). Tip To revert to the default profile settings, press Menu (right softkey) > Reset to default. Set Personal Information Entering and displaying owner information are best practices; they allow someone to return the phone to you in case it is lost.
The following are some of the phone services that you can configure for your phone: Phone Services Usage Auto Answering Sets how quickly calls are automatically answered during hands-free operation. Automatic Prepend Automatically adds a “1” in front of long distance numbers, if required. Call Options Lets you set any key to answer a call, set the country code, area code, and more. DDTM Mode Enables you to set voice calls to be sent to voicemail during active data connections.
Using Task Manager Managing Your Device Task Manager allows you to view or stop the programs currently running on your phone. To close running programs from the Task Manager: 1. From the Home panel, press Start (left softkey) > All Programs (left softkey) > Accessories > Task Manager. 2. On the Task Manger screen, select a program on the list and then press End Task (left softkey). Tip To stop all running programs, press Menu (right softkey) > End All Tasks.
Managing Memory To see how much memory is available 1. From the Home panel, press Start (left softkey) > All Programs (left softkey) > Settings > About. 2. Scroll down to check the Available Memory. To see how much storage space is available 1. From the Home panel, press Start (left softkey) > All Programs (left softkey) > Settings > About. 2. Scroll down to check the Available Storage. Adding and Removing Programs Additional programs that you purchased can be installed and uninstalled on your phone.
Resetting Warning Your phone will be set back to factory default settings. Make sure that any additional installed programs and/or user data have been backed up before you perform a hard reset. Important If Encrypt files when placed on a storage card is enabled, back up all files from the microSD card before using Clear Storage, hard reset, or updating the ROM system software. Otherwise you will no longer be able to access the encrypted files on the microSD card.
Section 2H Synchronizing With Your Computer ⽧ About Synchronization (page 66) Ways to Synchronize (page 66) Setting Up ActiveSync on Windows XP (page 67) Setting Up Windows Mobile Device Center on Windows Vista (page 67) Synchronizing With Your Computer (page 69) Synchronizing via Bluetooth (page 71) Synchronizing Music and Video (page 71) ⽧ ⽧ ⽧ ⽧ ⽧ ⽧ You can take information from your computer wherever you go by synchronizing them to your phone.
The Getting Started CD that comes with your phone contains Microsoft ActiveSync 4.5 (or later). Follow the steps in this section to install and set up ActiveSync on Windows XP or other compatible Windows systems. Note For a list of compatible Windows systems, go to this website: http://www.microsoft.com/windowsmobile/activesync/activesync45.mspx. Installing ActiveSync 1. Place the Getting Started CD in the CD or DVD drive of your computer, and then click Setup and Installation. 2.
Setting Up Synchronization in Windows Mobile Device Center When you connect your phone to your computer and start Windows Mobile Device Center for the first time, you are asked to create a Windows Mobile partnership with your phone. To create a partnership: 1. Connect your phone to your computer. Windows Mobile Device Center configures itself, and then opens. 2. On the license agreement screen, click Accept. 3. On the Windows Mobile Device Center’s Home screen, click Set up your device.
Synchronizing With Your Computer Using Windows Mobile Device Center To open Windows Mobile Device Center, click Start > All Programs > Windows Mobile Device Center on your Windows Vista computer. Within Windows Mobile Device Center, you can do the following: 䢇 Click Mobile Device Settings to change synchronization settings.
From ActiveSync on Your Computer When you connect your phone to your computer, ActiveSync automatically opens on your computer and synchronizes. 䢇 To manually start synchronization, click 䢇 To end synchronization before it completes, click . . From Windows Mobile Device Center 1. Click Start > All Programs > Windows Mobile Device Center. 2. Click at the lower left of the Windows Mobile Device Center. To end synchronization before it completes, click .
You can connect and synchronize your phone with the computer using Bluetooth. Note To connect and synchronize your phone with a computer via Bluetooth, your computer must have a built-in Bluetooth or installed with a Bluetooth adapter or dongle. 1. Set up Windows Mobile Device Center or ActiveSync on your computer to synchronize through Bluetooth. See the program’s Help for instructions. 2. On your phone, press Start (left softkey) > All Programs (left softkey) > ActiveSync. 3.
Section 3 Device Services
Section 3A ⽧ Voicemail (page 74) ⽧ Text Messaging (SMS) SMS Voice Messaging (page 74) ⽧ Call Waiting (page 77) ⽧ Making a Three-Way Call (page 78) Device Services: The Basics Device Services: The Basics Voicemail Setting Up Your Voicemail 䊳 For instructions on how to set up your voicemail, see “Setting Up Your Voicemail” on page 4.
Creating a New Text Message Device Services: The Basics From the Home Screen 1. From the Home panel, scroll to the Messages tab and then press the Enter key. 2. Select Text Message. Tip If you have unread messages, you will need to press the navigation key right until you see New Message before pressing the Enter key. From the Messaging Screen 1. From the Home panel, press Start (left softkey) > All Programs (left softkey) > Messaging > SMS / MMS. 2. Select Menu (right softkey) > New > SMS.
Copy words or lines of text in your messages or email messages and then paste them on the current or new message. To copy text from a message or email that is being written 1. In the message that is being written, position the cursor where you want to start copying from. 2. Press Menu (right softkey) > Copy/Paste > Select Text. 3. Press the navigation key left or right until you have selected the text you want to copy and then press Copy (left softkey). To copy text from a message or email 1.
To reply to a text message: 1. In the SMS / MMS inbox, highlight a message thread and press the Enter key to open it. Device Services: The Basics 2. At the bottom of the screen, type your reply message and then press Send (left softkey). Enter your reply message here To delete a message in the thread: 1. In the SMS / MMS inbox, highlight a message thread and press the Enter key to open it. 2. Press the navigation key up or down to select a message in the thread that you want to delete. 3.
For those calls where you don’t want to be interrupted, you can temporarily disable Call Waiting by pressing * 7 0 before placing your call. Call Waiting is automatically reactivated once you end the call. Device Services: The Basics Tip Making a Three-Way Call With Three-Way Calling, you can talk to two people at the same time. When using this feature, the normal airtime rates will be charged for each of the two calls. 1. Place the first call, or take an incoming call. 2.
Section 3B ⽧ Getting Started With Data Services (page 79) ⽧ Connecting to the Internet (page 81) ⽧ Navigating the Web (page 83) ⽧ Using Windows Live (page 84) ⽧ Using RSS Hub (page 89) ⽧ Using Remote Desktop Mobile (page 93) ⽧ Email Messaging (page 94) ⽧ Working With Company Email and Meeting Appointments (page 100) Web and Data Services Web and Data Services Getting Started With Data Services Your service provider has enhanced data services with increased broadband speed, and gives you c
Connecting to Data Services Web and Data Services To connect to data services and access the Internet, you can simply launch the Web browser on your device. You can also connect to data services from the Connections settings screen or the Comm Manager. Connecting to Data Services Using Internet Explorer 䊳 Press Start (left softkey) > All Programs (left softkey) > Internet Explorer. — or — From the Home panel, scroll to the Internet Explorer tab and then press the Enter key.
Your device’s networking capabilities allow you to wirelessly access the Internet or your corporate network through one of the following connections: 䢇 Data Services (see “Getting Started With Data Services” on page 79) 䢇 Wi-Fi (see “Wi-Fi” on page 81) 䢇 Dial-up (see “Dial-up” on page 82) Note You can also add and set up the following connections: • VPN: A VPN connection is used to access your corporate network by using an existing Internet connection.
By default, the Authentication Type for your phone is Open System authentication. • By default, the LEAP screen displays data that you entered previously. However, you can modify or delete the data as required by clicking Menu > Modify or Menu > Delete on the LEAP screen. • For LEAP to work correctly, the receiving phone (your phone) must be set with the same SSID, user name, and password as the access point.
3. In URL Pattern, enter the URL name. To add multiple URLs, use a semicolon (; ). 4. Press Done (left softkey). You do not need to create URL exceptions for Internet URLs. Web and Data Services Note Navigating the Web To search, browse, and navigate the Web on your device, use Internet Explorer Mobile. Using Internet Explorer Mobile Internet Explorer® Mobile is the standard Web browser that is included with Windows Mobile.
● Text Size. Allows you to choose the font size for the text. Displays the current Web page in full-screen view. To change back to the normal view, press the left or right softkey, and then press Menu (right softkey) > View > Full Screen to deselect the full screen option. ● Mobile. Arranges the content into one column that is as wide as the screen. This means that you will rarely have to scroll horizontally. ● Desktop.
5. Choose what information you want to sync online with your device. If you select Store Windows Live contacts in your mobile phone’s contact list, your Windows Live™ contacts will be added to the Web and Data Services 䡲 contact list and to Windows Live™ Messenger on your device. 䡲 If you select Sync e-mail, your Windows Live™ Mail or Hotmail inbox messages will be downloaded to your device. 6. Press Next (left softkey). 7. After synchronization is complete, press Done (left softkey).
Windows Live Messenger 䢇 Instant messaging via text and voice 䢇 Multiple conversations 䢇 Inserting emoticons 䢇 Contact list with online or offline status 䢇 Sending and receiving files (including photos) 䢇 Changing the status and display name 䢇 Viewing contacts by online status, groups, and more 䢇 Sending messages even when a contact is offline Note Web and Data Services With this mobile version of Windows Live™ Messenger, you enjoy many of the same features that you get from the desktop v
To start and end conversations: Web and Data Services 1. In the contact list, select a contact, and then press Send IM (left softkey) to open a message screen. 2. Enter your text message in the text entry area of the message screen. 3. To add an emoticon, press Menu (right softkey) > Add emoticon, highlight an icon, and then press Select. (left softkey) or press the Enter key 4. Press Send (left softkey). 5.
Adding Windows Live Contacts Web and Data Services You can add new Windows Live contacts in Windows Live Messenger or in Contacts. To add a Windows Live contact in Live Messenger: 1. Press Menu (right softkey) > Add new contact. 2. Enter the email address of the contact, and then press OK (left softkey). To add a Windows Live contact in Contacts: You can only add Windows Live contacts if you selected the Store Windows Live contacts in your mobile phone’s contact list checkbox when you set up Windows Live.
Using RSS Hub news channels and downloads the most current news updates and podcasts so you are instantly informed of breaking news and events. This section provides basics on using RSS Hub. For more information and tips on using RSS Hub, see Help on your device. Note Make sure you have an active Internet connection (such as Wi-Fi or a data connection) before using RSS Hub. To find out how to connect to the Internet, see “Connecting to the Internet” on page 81.
Web and Data Services 1 5 2 3 4 1. Channel List. Shows the list of available channels. 2. Cancel. Press to cancel the channel update process. 3. Updated Channels. Channels are displayed in bold after they have been updated. Select a channel to view the headlines for that channel. 4. Refresh. Press to update the channels. 5. Headline Count. Shows the number of headlines per channel. To add new channels: 1.
Viewing and Organizing Headlines Web and Data Services Select a channel in the channel list to display the headlines for that channel. 1 2 4 3 7 4 5 6 1. Headline. Select a headline to open the news summary screen. 2. This icon indicates that the headline is new or unread. 3. This icon indicates that the headline has already been read. 4. This icon indicates that the headline or news summary contains a keyword. 5. Channels. Press to return to the channel list. 6.
1. Shows the channel name Web and Data Services 2. Displays the headline and read status. 3. Displays the news summary. 4. Select Read More Online to open the news item in Internet Explorer. See “Navigating the Web” on page 83 for details. 5. Press Headlines (left softkey) to return to the headline list. 6. Highlight and press the Enter key to download the audio, video or image file attachment.
Remote Desktop Mobile lets you access your computer remotely from your device and use programs which are available on your computer. Notes • Make sure that you configure the remote computer to allow remote desktop connections. Refer to your operating system’s manual or help file for details. • You need to be connected to the Internet to remotely access your desktop computer.
Email Messaging Web and Data Services Types of Email Accounts You can set up the following types of email accounts on your device: 䢇 Outlook email that you sync with your computer or the Exchange Server. 䢇 Email accounts that you have with an Internet Service Provider (ISP) or other email provider. 䢇 Web-based email accounts such as Gmail®, Yahoo!® Mail Plus, AOL®, and others. 䢇 Work accounts that you access using a VPN connection.
Set up a POP3 or IMAP4 email account on your device if you have an email account from an Internet service provider (ISP) or other email service provider, or a Web-based account such as Gmail, Yahoo! Mail Plus, or AOL. You can also add a work account that you access using a VPN server connection as a POP3/IMAP4 account. 1. Press Start (left softkey) > All Programs (left softkey) > Messaging > Setup E-mail. 2. Enter your email address and the password for your email account.
Before you press Finish when setting up your POP3 or IMAP4 email account, you can select the Review all download settings link at the bottom of the screen to choose download options, message format, and other settings. In the Email Setup screen, select Advanced Settings for further options. Options Automatic Send/Receive Description You can select a time interval for connecting to the Internet automatically to send and receive messages.
Creating a New Email Message Web and Data Services To start from an empty message: 1. Press Start (left softkey) > All Programs (left softkey) > Messaging then select an email account. 2. Press Menu (right softkey) > New. To send an email message to a favorite contact: 1. From the Home panel, press Contacts (right softkey). 2. Select a contact and press the Enter key. 3. In the Contact card, select Send e-mail.
Viewing and Replying to Messages By default, each email received in the inbox on your device contains only the first few kilobytes of the message. When you open an email message, it displays only the headers and part of the message. You must download the whole email to view the complete content.
Synchronizing email message ensures that new emails are downloaded to the phone Inbox folder, emails in the Outbox folder are sent, and emails deleted from the server are removed from your phone. The manner in which you synchronize emails depends on the type of email account you have. To automatically synchronize an Outlook email account: 1. Connect your device to your computer through USB or Bluetooth.
To keep up-to-date with your company email and meeting schedules while you’re out of the office, you can connect your device to the Internet via your data connection and synchronize with your company’s Exchange Server. This section shows you how to set up an Exchange Server connection on your device so that you can access your Outlook email and synchronize other information such as calendar appointments with your company’s Exchange Server.
Before you start synchronizing with the Exchange Server, make sure your device has been set up with a data connection to the Internet or Wi-Fi so that you can synchronize over the air. For more information about connections, see “Connecting to the Internet” on page 81. After you finish setting up an Exchange Server connection, your device automatically starts synchronization.
Scheduled Synchronization 1. In ActiveSync on your device, press Menu (right softkey) > Schedule. 2. Select a shorter time interval in the Peak times box for you to be able to receive emails more frequently. (Peak times usually refer to your working hours when email volume is high). 3. Select a longer interval in the Off-peak times box. Tip Press Menu (right softkey) > Peak Times to set the peak and off-peak times.
Flags serve as a reminder for you to follow up on important issues or requests contained in email messages. Flagging messages, which has been a useful feature on desktop Outlook Email, can also be done in Outlook Mobile on your device. You can flag received email messages on your device. Requirement Flags are enabled only if emails are synchronized with Microsoft Exchange Server 2007 or higher. Flags are disabled or hidden if email is synchronized with earlier versions of Microsoft Exchange Server.
Managing Meeting Requests Web and Data Services When you schedule and send meeting requests from your device, you can invite attendees to your meeting and check their status to know about their availability. When you receive a meeting request, you can reply by accepting or declining the request. The meeting request also clearly indicates whether there are conflicting or adjacent meetings. Requirement Your company must be using Microsoft Exchange Server 2007 or higher. To reply to a meeting request: 1.
In addition to having contacts on your device, you can access contact information from your organization’s Company Directory. By having over-the-air access to the Company Directory, you can easily send email messages and meeting requests to anyone in your company. Requirement Access to the Company Directory is available only if your organization is running Microsoft Exchange Server 2003 SP2 or higher, and you have completed your first synchronization with the Exchange Server. 1.
Entertainment: Video and Music ⽧ YouTube (page 106) ⽧ Streaming Music (page 111) YouTube YouTube™ lets you browse, search, and watch video clips from the YouTube server. This section shows you how to use the YouTube application on your device to browse, search, watch, and bookmark videos from YouTube. Note You need an active connection to use YouTube. If you are using a data connection, your data connection bill may increase significantly due to large file sizes of the videos.
The Program Guide list lets you change the program channel so you can browse different types of videos available on the YouTube server. To add a new program channel into the Program Guide list: 1. On the YouTube screen, scroll to . 2. Press Search (left softkey). 3. On the Search screen, enter keywords to search for channels you want to add to the Program Guide list. 4. Press Search (right softkey). YouTube searches for the channel and then displays the available videos from it. 5.
Entertainment: Video and Music 6. Press Yes (left softkey) on the confirmation screen. The channel you just subscribed to will now be shown when you press Program Guide. To change the program channel: 1. On the Videos screen, press Program Guide (left softkey). 2. On the Program Guide list, select a channel. 3. The video list refreshes to display the available videos for the newly selected channel.
Entertainment: Video and Music When you press the Enter key or finish watching the entire video, you are presented with details on video you just watched. Press Menu (right softkey) to view options on what you can do next. 7 12 10 8 11 9 9 7. Previous. Select to go back to the previous page of related videos. 8. Send. Select to send the link to the video you just watched to another person using one of the Messaging accounts. 9. Add Bookmark. Select to add the video to your Bookmarks. 10. Play.
To view Bookmarks: On the YouTube screen, scroll to . Select a video to watch it. Entertainment: Video and Music 䊳 To delete a video from Bookmarks: 1. On the Bookmarks screen, select the video you want to delete. 2. Press Delete (left softkey). 3. On the confirmation screen, press Yes (left softkey). History View recently watched videos on the History screen. To view History: 䊳 On the YouTube screen, scroll to Note . Select a video to watch it. To clear the History list, press Clear (left softkey).
Streaming Media lets you stream live broadcasts or on-demand media content from the Web. The media is sent in a continuous stream to your device and is played as it arrives, along with the audio. The Streaming Media program allows you to play 3GP and MPEG-4 files. It also supports playback of SDP (Session Description Protocol) files.
To stream media files directly on the Streaming Media Player: Note Before you launch the Streaming Media program, make sure that you are connected to the Internet. 1. From the Home panel, press Start (left softkey) > All Programs (left softkey) > Multimedia > Streaming Media. 2. From the program, press Menu (right softkey) > Connect. 3. Enter the URL for the website (rtsp://) and the file name. 4. Press Go (left softkey). 5. Streaming Media then starts playing the file.
Section 3D ⽧ Guidelines and Preparation for Using GPS (page 113) ⽧ Downloading Satellite Data via QuickGPS (page 114) GPS Navigation GPS Navigation Guidelines and Preparation for Using GPS Please follow these guidelines before and when using your device as a GPS device. 䢇 Do not attempt to set or adjust the GPS system while driving. 䢇 When using the device inside a vehicle, use the car holder to mount the device securely in place.
Before you start using your device for GPS navigation, open the QuickGPS program first to download ephemeris data (current satellite position and timing information) to your device. This data is needed to determine the GPS position of your current location. QuickGPS downloads data from a Web server using the Internet connection on your device (ActiveSync, wiFi, or data services). This significantly speeds up the time for determining your GPS position.
Section 4 Safety, Regulatory and Warranty Information
Section 4A Important Safety Information ⽧ Safety Precautions (page 116) ⽧ General Precautions (page 119) ⽧ Additional Safety Information (page 120) This User Guide contains important operational and safety information that will help you safely use your device. Failure to read and follow the information provided in this guide may result in serious bodily injury, death, or property damage.
䢇 Danger of explosion if battery is incorrectly replaced. To reduce risk of fire or burns, do not disassemble, crush, puncture, short external contacts, expose to temperature above 60° C (140° F), or dispose of in fire or water. Replace only with specified batteries. Recycle or dispose of used batteries according to the local regulations or reference guide supplied with your product.
Road Safety Vehicle drivers in motion are not permitted to use telephony services with handheld devices, except in the case of emergency. In some countries, using hands-free devices as an alternative is allowed. Safety Precautions for RF Exposure 䢇 Avoid using your phone near metal structures (for example, the steel frame of a building). 䢇 Avoid using your phone near strong electromagnetic sources, such as microwave ovens, sound speakers, TV and radio.
䢇 Avoid applying excessive pressure to the device. Do not apply excessive pressure on the screen and the device to prevent damaging them and remove the device from your pants’ pocket before sitting down. It is also recommended that you store the device in a protective case. Cracked display screens due to improper handling are not covered by the warranty. 䢇 Device getting warm after prolonged use.
Additional Safety Information When Driving Do Not Use the PC Functions of Your Device While Driving or Walking Never use the personal computer functions of your device while driving an automobile or any other moving vehicle. Always pull out of traffic and come to a stop in a legally permissible and safe location before using your device. Failure to do so could result in serious bodily injury in a traffic accident. When driving: 䢇 Always secure your device in its leather pouch.
Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider, or call the customer service line to discuss alternatives. For more regulatory information about hearing devices, see “FCC Hearing-Aid Compatibility (HAC) Regulations for Wireless Devices”. Electronic Devices in Vehicles RF signals may affect improperly installed or inadequately shielded electronic systems in motor vehicles.
General Safety and Other Precautions Your device is a high quality piece of equipment. Before operating, read all instructions and cautionary markings on the product, battery and AC phone charger. Failure to follow the directions below could result in serious bodily injury and/or property damage due to battery liquid leakage, fire or rupture. DO NOT use or store this equipment in a place where it will be exposed to high temperatures, such as near an open flame or heat-emitting equipment.
䢇 Don’t attempt to disassemble the battery – it is a sealed unit with no serviceable parts. 䢇 Don’t expose the battery terminals to any other metal object (e.g., by carrying it in your pocket or purse with other metallic objects such as coins, clips and pens). This can short circuit and critically damage the battery. 䢇 Don’t leave the battery in hot or cold temps. Otherwise, it could significantly reduce the capacity and lifetime of the battery. 䢇 Don’t dispose of the battery into a fire.
Section 4B Regulatory Notices ⽧ Regulatory Agency Identifications (page 124) ⽧ Federal Communication Commission Interference Statement (page 126) ⽧ FCC Hearing-Aid Compatibility (HAC) Regulations for Wireless Devices (page 126) ⽧ SAR Information (page 128) ⽧ Body-worn Operation (page 128) ⽧ Telecommunications & Internet Association (TIA) Safety Information (page 129) ⽧ WEEE Notice (page 129) ⽧ RoHS Compliance (page 129) This section provides more safety information and regulation statement
䢇 ETSI EN 301 489-17 䢇 ETSI EN 300 328 Electromagnetic compatibility and Radio spectrum Matters (ERM); Wideband Transmission systems; data transmission equipment operating in the 2.4 GHz ISM band and using spread spectrum modulation techniques. 䢇 ETSI EN 300 440-2 Electromagnetic compatibility and Radio spectrum Matters(ERM); Short range devices; Radio equip-ment to be used in the 1 GHZ to 40 GHZ frequency range; Part2: Harmonized EN under article 3.2 of the R&TTE Directive.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are likely to be more usable with a hearing aid’s telecoil than phones that are not rated. T4 is the better/higher of the two ratings. CEDA100 complies with the FCC’s requirements for hearing aid compatibility when using the CDMA air interface. The M rating in this mode is M3 and the T rating in this mode is T3. Please power off the Bluetooth function while using hearing aid devices with your CEDA100. Hearing devices may also be rated.
SAR Information 0.213 W/kg @ 10g ( CE ) 1.03 W/kg @ 1g ( FCC ) THIS MODEL DEVICE MEETS THE GOVERNMENT’S REQUIREMENTS FOR EXPOSURE TO RADIO WAVES. For body worn operation, this phone has been tested and meets the FCC RF exposure guidelines when used with the HTC Corporation accessories supplied or designated for this product. Use of other accessories may not ensure compliance with the FCC RF exposure guidelines. Your wireless mobile phone is a radio transmitter and receiver.
Telecommunications & Internet Association (TIA) Safety Information The Health Industry Manufacturers Association recommends that a minimum separation of six inches be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker. These recommendations are consistent with the independent research by and recommendations of Wireless Technology Research.
Section 4C Warranty and Other Notices ⽧ Manufacturer’s Warranty (page 130) ⽧ Privacy Restrictions (page 132) ⽧ Weather Disclaimer (page 132) ⽧ Warranty Disclaimer (page 132) ⽧ Limitation of Damages (page 132) Your device has been designed to provide you with reliable, worry-free service. If for any reason you have a problem with your equipment, please refer to the manufacturer’s warranty in this section.
To obtain repairs or replacement within the terms of this Warranty, the product should be delivered with proof of Warranty coverage (e.g. dated bill of sale), the consumer’s return address, daytime phone number and/or fax number and complete description of the problem, transportation prepaid, to the Company at the address shown below or to the place of purchase for repair or replacement processing.
Privacy Restrictions Some countries require full disclosure of recorded telephone conversations, and stipulate that you must inform the person with whom you are speaking that the conversation is being recorded. Always obey the relevant laws and regulations of your country when using the recording feature of your PDA Phone. Weather Disclaimer THE WEATHER INFORMATION, DATA AND DOCUMENTATION ARE PROVIDED “AS IS” AND WITHOUT WARRANTY OR TECHNICAL SUPPORT OF ANY KIND FROM HTC.
HTC, the HTC logo, HTC Innovation, ExtUSB, and HTC Care are trademarks and/or service marks of HTC Corporation. Microsoft, MS-DOS, Windows, Windows NT, Windows Server, Windows Mobile, Windows XP, Windows Vista, ActiveSync, Windows Mobile Device Center, Internet Explorer, MSN, Hotmail, Windows Live, Outlook, Excel, PowerPoint, Word, OneNote and Windows Media are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries.
D Data Connection 35, 80 Device Name 59 Direct Push 35, 101 Downloading Downloading a Complete Email Message 98 Email Settings 96, 99 File Attachments 98 Satellite Data 114 Web Feeds 89 A A2DP 54 About 59 ActiveSync 67, 69, 70 Adding and Removing Programs 64 Adobe Reader LE 36 Airplane Mode 24, 35 Alarm 60 Album About 44 Closing Album 46 Playing Back Video 45 Selecting a Photo or Video to View 44 Viewing an Image 44 Appointments 26 Attachment Adding an Attachment to a Message 97 Downloading 98 Audio Booste
Sending 75 Three-Way Call 78 Troubleshooting Sync Connection 70 Windows Media Player Mobile 49 Turning the Phone On and Off 24, 35 Turning Your Device On and Off 10 Numeric mode 18 O Office Mobile 36 P Panorama Capture Mode 39 Phone Services 61 Photo Capture Mode 39 Picture Theme Capture Mode 39 Playing Media 49 Playing Music Windows Media Player Mobile 49 Playlists Windows Media Player Mobile 49 POP3 95 Putting a Call On Hold 21 U USB to PC 70 Using Your Device as a USB Drive 56 V Video Capture Mode 39 V
