Getting Started Guide

1. While holding the phone

face up and the top panel

facing you, open the slot

cover with your thumb

or finger.

There are two slots inside

the compartment. The

upper slot contains the

SIM card tray.

2. Insert and push the tip of

the SIM eject tool (or a

small bent paperclip) into

the small hole next to the

SIM card tray slot until

the SIM card tray ejects.

3. Pull the SIM card tray out,

and place the microSIM

card (contacts facing

down and cut-off corner

facing out) into the tray.

Then insert the tray back

into the slot.

4. Insert your microSD card

into the storage card slot

with its gold contacts

facing down and push it

in until it clicks into place.

5. To close the slot cover,

slightly move it side to

side to let the rubber

hinge sink down by itself.

Then gently press down

the cover.

microSIM

microSD

SIM eject tool

Please don’t bend or press

down the rubber hinge of

the slot cover with force to

avoid damage or distortion.

Inserting your microSIM and microSD cards

Your HTC Butterfly s

PAGE 1
Your HTC Butterfly s Inserting your microSIM and microSD cards Please don’t bend or press down the rubber hinge of the slot cover with force to avoid damage or distortion. 1. While holding the phone face up and the top panel facing you, open the slot cover with your thumb or finger. There are two slots inside the compartment. The upper slot contains the SIM card tray. 2.
PAGE 2
Read this first Charge the battery The battery in your phone hasn’t been charged yet. Please use the supplied power adapter to do a full charge before you start using your phone. Also, please don’t try to take your phone apart. (If you do, it may invalidate your warranty.) Choose a rate plan wisely Depending on how you use your phone, it can use up a lot of Internet bandwidth really quickly. Before you use your phone, we strongly recommend that you contact your mobile operator about data rates.