Touch HD User Manual www.htc.
Please Read Before Proceeding THE BATTERY IS NOT CHARGED WHEN YOU TAKE IT OUT OF THE BOX. DO NOT REMOVE THE BATTERY PACK WHEN THE DEVICE IS CHARGING. YOUR WARRANTY IS INVALIDATED IF YOU OPEN OR TAMPER WITH THE DEVICE’S OUTER CASING. In regard to HSDPA/WCDMA,the phone just supports Band I (UMTS 2100) & Band VIII (UMTS 900) and doesn’t support band frequency for US.
Opera® Mobile from Opera Software ASA. Copyright 1995-2008 Opera Software ASA. All Rights Reserved. Google is a registered trademark and Google Maps is a trademark of Google, Inc. in the United States and other countries. YouTube is a trademark of Google, Inc. Copyright © 2008, Esmertec AG. All Rights Reserved. All other company, product and service names mentioned herein are trademarks, registered trademarks or service marks of their respective owners.
Disclaimers THE WEATHER INFORMATION, DATA AND DOCUMENTATION ARE PROVIDED “AS IS” AND WITHOUT WARRANTY OR TECHNICAL SUPPORT OF ANY KIND FROM HTC.
Limitation of Damages TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, IN NO EVENT SHALL HTC OR ITS PROVIDERS BE LIABLE TO USER OR ANY THIRD PARTY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL OR PUNITIVE DAMAGES OF ANY KIND, IN CONTRACT OR TORT, INCLUDING, BUT NOT LIMITED TO, INJURY, LOSS OF REVENUE, LOSS OF GOODWILL, LOSS OF BUSINESS OPPORTUNITY, LOSS OF DATA, AND/OR LOSS OF PROFITS ARISING OUT OF, OR RELATED TO, IN ANY MANNER, OR THE DELIVERY, PERFORMANCE OR NONPERFORMANCE OF OBLIGATIONS, OR
This product is equipped with a USB Cable for connecting with desktop or notebook computer. Be sure your computer is properly grounded (earthed) before connecting this product to the computer. The power supply cord of a desktop or notebook computer has an equipment-grounding conductor and a grounding plug. The plug must be plugged into an appropriate outlet which is properly installed and grounded in accordance with all local codes and ordinances.
• Take extra precautions • Keep the battery or device dry and away from water or any liquid as it may cause a short circuit. • Keep metal objects away so they don’t come in contact with the battery or its connectors as it may lead to short circuit during operation. • Do not use a battery that appears damaged, deformed, or discolored, or the one that has any rust on its casing, overheats, or emits a foul odor.
PREVENTION OF HEARING LOSS CAUTION: Permanent hearing loss may occur if earphones or headphones are used at high volume for prolonged periods of time. NOTE: For France, Earphone (listed below) for this device have been tested to comply with the Sound Pressure Level requirement laid down in the applicable NF EN 503321:2000 and/or NF EN 50332-2:2003 standards as required by French Article L. 5232-1. • Earphone, manufactured by HTC, Model HS G335.
blasting operations are in progress. Areas with a potentially explosive atmosphere are often, but not always, clearly marked. These include fueling areas, below deck on boats, fuel or chemical transfer or storage facilities, and areas where the air contains chemicals or particles, such as grain, dust, or metal powders. ROAD SAFETY Vehicle drivers in motion are not permitted to use telephony services with handheld devices, except in the case of emergency.
HEARING AIDS Some digital wireless phones may interfere with some hearing aids. In the event of such interference, you may want to consult your service provider, or call the customer service line to discuss alternatives. NONIONIZING RADIATION Your device has an internal antenna. This product should be operated in its normaluse position to ensure the radiative performance and safety of the interference.
General Precautions • Avoid applying excessive pressure to the device Do not apply excessive pressure on the screen and the device to prevent damaging them and remove the device from your pants’ pocket before sitting down. It is also recommended that you store the device in a protective case and only use the device stylus or your finger when interacting with the touch screen. Cracked display screens due to improper handling are not covered by the warranty.
• Avoid wet areas Never use the product in a wet location. • Avoid using your device after a dramatic change in temperature When you move your device between environments with very different temperature and/or humidity ranges, condensation may form on or within the device. To avoid damaging the device, allow sufficient time for the moisture to evaporate before using the device.
Contents Chapter 1 Getting Started 23 1.1 Getting to Know Your Touch Phone and Accessories ..................................... 24 Left panel.....................................................................................................................................24 Right panel..................................................................................................................................24 Front panel.........................................................................
1.11 Using your Device as a USB Drive .................................................................. 44 Chapter 2 Using Phone Features 45 2.1 Using the Phone................................................................................................ 46 The Phone screen .....................................................................................................................46 Enter your PIN .............................................................................................
People ...........................................................................................................................................70 Messages .....................................................................................................................................72 Mail.................................................................................................................................................73 Internet.......................................................
5.3 5.4 5.5 5.6 Set up synchronization in Windows Mobile Device Center.................................... 101 Use Windows Mobile Device Center............................................................................... 103 Setting Up ActiveSync® on Windows® XP...................................................... 104 Install ActiveSync................................................................................................................... 104 Set up synchronization in ActiveSync .......
Chapter 7 Working With Company E-mails and Meeting Appointments 127 7.1 Synchronizing with the Exchange Server ..................................................... 128 Set up an Exchange Server connection......................................................................... 128 Start synchronization ........................................................................................................... 129 7.2 Working With Company E-mails ........................................................
The Windows Live™ interface ............................................................................................ 158 Windows Live™ Messenger ................................................................................................ 159 Launch Messenger and sign in ......................................................................................... 159 Add Windows Live™ contacts............................................................................................ 160 8.
11.2 11.3 11.4 11.5 Zooming.................................................................................................................................... 194 The Review screen................................................................................................................. 195 Advanced Options................................................................................................................. 196 Viewing Photos and Videos Using Album..................................
Add new contacts.................................................................................................................. 228 Organize and search contacts........................................................................................... 229 Share contact information.................................................................................................. 229 12.6 Comm Manager............................................................................................. 230 12.
13.7 Protecting Your Device ................................................................................. 259 Protect your SIM card with a PIN...................................................................................... 259 Protect your device with a password.............................................................................. 259 Encrypt files on your storage card................................................................................... 260 13.8 Managing Memory ...........
Chapter 1 Getting Started 1.1 Getting to Know Your Touch Phone and Accessories 1.2 Installing the SIM Card, Battery, and Storage Card 1.3 Charging the Battery 1.4 Starting Up 1.5 Navigating Your Device 1.6 Home Screen 1.7 Status Icons 1.8 Start Menu 1.9 Quick Menu 1.10 Adjusting the Volume 1.
Getting Started 1.1 Getting to Know Your Touch Phone and Accessories Left panel Right panel VOLUME UP During a call or when playing music, press this button to increase the volume. VOLUME DOWN During a call or when playing music, press this button to lower the volume. Stylus (See “Stylus” in this chapter for details.
Getting Started 25 Front panel Notification LED Shows a flashing green light when there are new notifications. Second Camera Use this camera for video call conversations or to take a self-portrait. Earpiece Listen to a phone call from here. Touch Screen HOME Press to return to the Home screen. See Chapter 3 for details. TALK/SEND • Press to answer an incoming call or dial a number. • During a call, press and hold to toggle the speakerphone on and off. • Press and hold to use Voice Speed Dial.
Getting Started Back panel Speaker Back Cover 5.0 Megapixel Camera See “Taking Photos and Videos” in Chapter 11 for details.
Getting Started 27 Top panel 3.5 mm Audio Jack Connect the supplied stereo headset for hands-free conversation or for listening to audio media. POWER Press to turn off the display temporarily. To turn off the power, press and hold for about 5 seconds. For more information, see “Starting Up” in this chapter. Notification LED Shows a flashing amber light when the battery level reaches 10% or lower. Shows a solid amber light when the battery is being charged.
Getting Started Accessories The product package includes the following items and accessories: • • • • • Battery AC adapter Screen protector Stereo headset USB sync cable • • • • Pouch Quick Start Guide Getting Started and Application discs Extra stylus 1.2 Installing the SIM Card, Battery, and Storage Card Always turn off your device before installing or replacing the SIM card, battery, and storage card. You also need to remove the back cover before you can install these components.
Getting Started 29 To install the SIM card 1. Make sure your device is turned off. Cut-off corner 2. Locate the SIM card slot, then insert the SIM card with its gold contacts facing down and its cut-off corner facing out the card slot. 3. Slide the SIM card completely into the slot. To remove the SIM card 1. Remove the battery if it is installed. 2. Slide the SIM card out from the SIM card slot with your thumb.
Getting Started Warning! To reduce risk of fire or burns: • Do not attempt to open, disassemble, or service the battery pack. • Do not crush, puncture, short external contacts, or dispose of in fire or water. • Do not expose to temperatures above 60oC (140oF). • Replace only with the battery pack designated for this product. • Recycle or dispose of used battery as stipulated by local regulations. To install the battery 1.
Getting Started 31 Storage card To have additional storage for your images, videos, music, and files, you can purchase a microSD™ card and install it into the your device. To install a microSD card Insert the microSD card into the slot with its gold contacts facing down until it clicks into place. Note To remove the microSD card, press it to eject it from the slot. Storage card slot 1.3 Charging the Battery New batteries are shipped partially charged.
Getting Started Warning! • Do not remove the battery from the device while you are charging it using the AC or car adapter. • As a safety precaution, the battery stops charging when it overheats. 1.4 Starting Up After installing your SIM card and battery and charging the battery, you can now power on and start using your device. Turn your device on and off To turn on the power 1. Press the POWER button. 2.
Getting Started 33 To automatically configure data connection settings 1. When you see the notification message from the Connection Setup, tap Yes. Note If you do not see the notification message, tap on the Title bar to display the message. 2. If your SIM card supports multiple network operator profiles, a message will appear with network profile choices. Select the profile you want to use and tap OK. 3. Connection Setup then starts to configure your device’s data connection settings. 4.
Getting Started 1.5 Navigating Your Device There are different ways you can navigate and interact with the interface of your device. Finger-touch control A quick and easy way to interact with the home screen and the whole interface of your device is by touch.
Getting Started 35 The direction of swiping resembles the way you move a printed document as you are reading it. For detailed instructions, see “Finger scrolling” in Chapter 3. Slide Sliding on the touch screen also involves dragging with your finger, but you need to press and hold your finger with some pressure before you start to drag. While dragging, do not release your finger until you have reached the target position.
Getting Started Stylus You can use the stylus to navigate and interact with the touch screen. To use the stylus, pull it out from the stylus compartment at the bottom of the right panel of your device. The stylus is magnetic and sticks to the side when held close to the device. This prevents you from accidentally losing or misplacing the stylus. Basically, you tap with the stylus to open programs and select items on the screen, and you tap and hold on the screen to open a shortcut menu.
Getting Started 37 1.6 Home Screen The default home screen of the device is the TouchFLO™ 3D Home screen which allows finger-touch access to the most important functions such as contacts, text messages, e-mail, Internet, and more. For more information about using the TouchFLO 3D Home screen, see Chapter 3. Signal strength Connection status Notification Start menu Adjust volume Battery status Quick menu TouchFLO 3D Home screen Open the Phone screen (See Chapter 2 for details) Open the Programs tab.
Getting Started 1.7 Status Icons When you touch or tap the icon area of the title bar, the System Status screen opens and displays larger status icons so you can touch them with your finger more easily and accurately. Tip The System Status screen can be disabled in TouchFLO settings. See “Settings on your Device” in Chapter 13 for details. The following are some of the status icons that you may see on the device.
Getting Started 39 Icons that appear in this area Icons that appear in this area Connection Setup Speakerphone on Multiple notifications; tap the icon to view all New text messages; SMS notification of voice mail Roaming Sending MMS Alarm Other wireless network(s) detected Wired headset connected Receiving MMS Bluetooth on MMS sent Bluetooth visible mode on Cannot send MMS New incoming MMS New Windows Live™ message Missed call Bluetooth stereo headset connected
Getting Started Icons that appear in this area Icons that appear in this area GPRS available GPRS connecting EDGE available GPRS in use HSPA available EDGE connecting WCDMA/UMTS available EDGE in use Connected to a wireless network HSPA connecting Connection is active Connection is not active Synchronization in progress HSPA in use WCDMA/UMTS connecting WCDMA/UMTS in use Maximum signal strength No signal Phone is turned off No phone service Searching for phone service Voice call in progress
Getting Started 41 1.8 Start Menu The Start menu, which can be opened from the top left corner of the screen, gives you access to all the programs and settings of your Windows Mobile-powered device. Touch or tap to select an item on the Start menu. Open the Start menu. Open a recently-used program. When you are on another screen, touch or tap this item to return to the TouchFLO 3D Home screen. Open a program. Access more programs. View and change settings. View Help information for the current screen.
Getting Started 1.9 Quick Menu The Quick menu, which can be opened from the top right corner of the screen, shows the currently running programs. You can quickly switch between running programs, stop programs, and see how much program memory is being used. Customize Task Manager settings. (See “Using Task Manager” in Chapter 13.) Stop all currently running programs. Touch this icon to open the Quick Menu. Shows the total percentage of program memory in use. Touch to open the Memory settings screen.
Getting Started 43 1.10 Adjusting the Volume Adjusting the system volume changes the volume level of sound notifications and audio/video playback, whereas adjusting the ring volume affects only the volume of the phone ring. The system volume and ring volume can be separately adjusted. 1. Touch the icon area in the title bar and then touch the Speaker icon ( the System Status screen. ) on 2. To switch between the Ring Volume and System Volume screens, touch Ring or System on top of the screen. 3.
Getting Started 4. The System Volume or Ring Volume screen automatically closes. You can also manually close the screen by touching the screen. Note On certain screens that do not show the volume status icon on the title bar, you need to use the VOLUME UP/DOWN buttons on the left panel of your device to adjust the volume. Also use these buttons to adjust the conversation phone volume during an ongoing call. 1.
Chapter 2 Using Phone Features 2.1 Using the Phone 2.2 Voice Call 2.3 Voice and Video over IP Calls 2.4 Smart Dial 2.
Using Phone Features 2.1 Using the Phone Like a standard mobile phone, you can use your device to make, receive, and keep track of calls and send messages. The Phone screen To open the Phone screen, do one of the following: • On the Home screen, tap Phone. • Tap Start > Phone. • Press the TALK/SEND button. TALK/SEND button Enter your PIN Most SIM cards are preset with a PIN (personal identification number) that is provided by your wireless service provider. 1.
Using Phone Features 47 2.2 Voice Call Make a call To make a call from the Phone screen 1. On the Home screen, tap Phone. 2. Tap the keys on the keypad to enter the phone number. Tip If you tapped a wrong number, tap to erase each subsequent digit of a number. To erase the entire number, tap and hold . 3. Tap Talk to place the call. Tip Note When in a call, use the VOLUME UP/DOWN buttons on the side of the device to adjust the phone volume.
Using Phone Features To make an emergency call Enter the international emergency number for your locale, and press the TALK/SEND button on your device. Tip Additional emergency numbers may be included in your SIM card. Contact your wireless service provider for details. To make an international call 1. Tap and hold the number 0 key on the Phone screen until the plus (+) sign appears. The plus (+) sign replaces the international prefix of the country that you are calling. 2.
Using Phone Features 49 To answer or reject an incoming call • To answer the call, tap Answer, or press the TALK/SEND button. • To reject the call, tap Ignore, or press the END button. • To mute the ringing sound without rejecting the call, tap Mute Ring. Note When you answer a call and hold the device close to your ear, the display automatically turns off. This helps prevent accidental screen presses during a phone call and also help to save battery power.
Using Phone Features When Reject call with text message is enabled, tap Send Text to reject the call and send the text message to the caller. To put a call on hold Your device notifies you when you have another incoming call, and gives you the option of rejecting or accepting the call. If you are already on a call and accept the new call, you can choose to switch between the two callers, or set up a conference call between all three parties. 1.
Using Phone Features 51 To mute the microphone during a call to toggle between turning on or off the microphone. When the Tap appears on the screen. microphone is turned off, the mute icon To open Notes while in a call . Tap To vibrate the device when the call is established You can set the device to vibrate once to alert you that the call has been established with the other party. 1. On the Phone screen, tap Menu > Options >Advanced tab. 2.
Using Phone Features To check a missed call You will see the icon in the title bar when you missed a call. To check who the caller was, do one of the following: • Tap the title bar, then tap • On the Phone screen, tap Menu > Call History and then tap and then tap View. . Call History Use Call History to check for missed calls, dialed numbers, and calls received. To open the Call History screen, tap Menu > Call History on the Phone screen.
Using Phone Features 53 Turn the phone function on and off In many countries, you are required by law to turn off the phone while on board an aircraft. To enable or disable the phone function 1. Tap Start > Programs > Comm Manager. 2. On the Comm Manager screen, tap the Phone button to enable or disable the phone function. When enabled, the ON indicator is activated. To enable or disable Airplane Mode Another way to turn off the phone function is to switch your device to Airplane Mode.
Using Phone Features 2.3 Voice and Video over IP Calls Your device allows you to make Voice over IP (VoIP) and Voice and Video over IP (VVoIP) calls to your contacts with VoIP-capable handsets, IP phones, or computers with VoIP application installed. Note VoIP and VVoIP calling are charged services and have to be provisioned on your mobile phone account. Contact your wireless service provider for details.
Using Phone Features 55 • WiMAX / WiFi Only. Select this option if you only want to use your WiMAX or Wi-Fi network connection for all outgoing calls. • GSM Only. Select this option if you only want to use your cellular network (EDGE or GPRS) for all outgoing voice calls. Calls made over the cellular network may incur additional charges. • WiMAX / WiFi Preferred. When selected, your device will initially use the WiMAX or Wi-Fi network connection for all outgoing calls.
Using Phone Features 3. When your device is connected to a wireless network, tap Start > Phone. 4. Check the VoIP status icon on the top right corner of the Phone screen. Refer to the following table for the status icons’ description. VoIP registration status icon Icon Description Ready. Registration to the VoIP service is successful. You can now make or receive voice or video over IP calls. Registering. The device is registering with the VoIP service. Not available.
Using Phone Features 57 To make a VoIP call using the SIP URI You can make a Voice over IP call to contacts outside the VoIP service’s domain if you know their Uniform Resource Identifier (URI). The URI is your contact’s phone number inside a Session Initiation Protocol (SIP) server, and resembles an e-mail address (for example, contactname@sipnetwork.com). 1. On the Phone screen, tap Menu > Dial SIP URI. 2. Enter the SIP URI of the contact using the onscreen keyboard, then tap ap Call.
Using Phone Features Make a VVoIP call Video calls made over IP are called Voice and Video over IP calls or VVoIP calls. Do one of the following to make a VVoIP call: • On the Phone keypad, tap the VoIP phone number to call, then tap Menu > Video Call to start a VVoIP call. • If you want to video call a contact outside the VoIP service’s domain, tap Menu > Dial SIP URI, enter the SIP URI of the contact, then tap ap Menu > Video Call to start a VVoIP call.
Using Phone Features 59 End a VVoIP call Once a VVoIP call is in progress, tap End Call or press END to hang up. Change the VVoIP call settings While on a VVoIP call, you can change certain settings such as the size of the image, brightness of the video image, the camera to use, and more. The following shows the VVoIP call screen elements and control buttons during an ongoing VVoIP call. 1 Image display area. Displays your image and the other party's image, depending on the selected Swap View setting.
Using Phone Features Brightness To adjust the brightness of the live image, tap Menu > Brightness while in a VVoIP call. A brightness bar appears below the status area. to make the live image brighter or tap Tap to make it less bright. You can also move the slider left or right with your finger or stylus to adjust the brightness. Note You cannot adjust the brightness for a still image.
Using Phone Features 61 • Video screen preference. Change how your image and the other party’s image are displayed on the screen, select your preference from the Video screen preference list or tap the View button on the Video Call screen. • Camera options: • Flip the 2nd camera video. Select this check box if you are going to show a text document to the other party using the second camera. • Switch camera off when answering video call.
Using Phone Features 2.4 Smart Dial Smart Dial makes it easy for you to dial a phone number. When you start entering a phone number or contact name, Smart Dial automatically searches and sorts the contact entries on the SIM card, in Contacts, and the phone numbers in Call History (including incoming, Smart Dial outgoing, and missed calls). You can then panel select the desired number or contact from the filtered list to dial.
Using Phone Features 63 Make a call or send a text message using Smart Dial 1. On the Home screen, tap Phone. 2. Begin entering the first few numbers or characters. When you start entering a number or letter, the Smart Dial panel will display matches found. Tip Tap to close the phone keypad and to see if there are more matching contacts. 3. In the Smart Dial panel, flick and slide your finger on the touch screen. 4. You can do one of the following: • Tap the contact to call the selected contact.
Using Phone Features 2. On the Home screen, slide to the Settings tab and then tap Menu > Bluetooth Devices > SIM Access tab. 3. Select the Remote SIM Access check box, then tap OK. 4. Connect the car kit phone to your device via Bluetooth. To learn how to connect, consult your car kit phone’s manual. 5. If this is the first time you are pairing the car kit phone with your device, enter the car kit’s passcode on your device. 6.
Chapter 3 TouchFLO™ 3D 3.1 About TouchFLO™ 3D 3.2 Using the TouchFLO 3D Home Screen 3.
TouchFLO™ 3D 3.1 About TouchFLO™ 3D TouchFLO™ 3D gives you touch control over your Windows Mobile-powered device. TouchFLO 3D provides the following features: • A Home screen that allows finger-touch access to the most widely-used functions, such as People, Messages, Mail, Music, Internet, and more • Allows you to use finger gestures to navigate screens 3.
TouchFLO™ 3D 67 To switch between the tabs of the Home screen Do one of the following: • Touch or tap the desired tab on the Home screen. • Press and hold your finger on the active tab, then slide your finger right or left over the tabs. Release when you have selected the desired tab. Note Apply some pressure when pressing and holding on the active tab to be able to slide over the tabs.
TouchFLO™ 3D • Swipe left across the screen to move to the next tab, and swipe right across the screen to move to the previous tab. Home The Home tab displays the current date, a flip-style clock, and an Alarm icon that indicates whether the alarm is on or off. Missed calls and your upcoming calendar appointments are also shown on the Home tab. To select an item on the Home tab, touch the item.
TouchFLO™ 3D 69 Touch the date or the flip clock to open the Clock & Alarms screen where you can set the date, time, and alarm. (See Chapter 13 for details.) Swipe upward on the screen to display the smaller digital clock and view more appointments. Touch this area to view details about missed calls in the Call History. (See Chapter 2 for details.) Home tab with flip clock One all-day appointment and up to two timed appointments can be displayed. Touch this area to create, edit or view an appointment.
TouchFLO™ 3D People On the People tab, you can add favorite contacts who you most frequently communicate with. This allows you to quickly make calls, send text messages, and send e-mails to your favorite contacts. Tip You can add up to 15 favorite contacts on the People tab. To add favorite contacts You should already have created or synchronized contacts on your device before you can add them to the People tab. 1. On the Home screen, slide your finger to the People tab. 2.
TouchFLO™ 3D 71 To choose from your favorite contacts • Do any of the following: To flip through the contact pictures one at a time, swipe your finger up or down the screen. On the picture strip at the right side of the People screen: • Touch the picture of the desired favorite contact; or • Press and hold on the currently selected contact picture to display a slide-out bar, and then slide up or down the picture strip. Release your finger when the desired favorite contact is selected.
TouchFLO™ 3D • After selecting a favorite contact, touch an icon below the contact name to call or to compose and send a text or an e-mail message to the contact. Touch to call the contact. Touch to call the contact’s home phone. Touch to compose and send a text message. Touch to call the contact’s Touch to compose and work/office phone. send an e-mail message. The icons shown will depend on available contact information. For example, ( ) will be shown if the contact’s home phone is specified.
TouchFLO™ 3D 73 To view the entire message thread from the sender and reply, touch the message on the screen. Touch All Messages to access all text messages in your inbox and other folders. Touch this icon to create a new SMS text message. To flip through received text messages, swipe your finger upward/ downward, touch the Up/Down arrow on the screen. Touch Menu to remove the current message and access more options.
TouchFLO™ 3D For detailed instructions on setting up e-mail accounts using the E-mail Setup wizard, see Chapter 6. To check e-mail When there are new e-mails, the icon on the Mail tab and the respective icons of the e-mail accounts will show the number of newly received messages. • To browse through received e-mails, swipe up or down on the envelope image. • Touch the e-mail on the screen to open and read the message. Touch Inbox to access all e-mail messages of the currently selected account.
TouchFLO™ 3D 75 Internet On the Internet tab, you can open Opera Mobile™ to browse the web and add web favorites for one-touch access to your favorite web sites. Touch here to browse the web using Opera Mobile. Swipe upward to scroll down the screen and access more web favorites, when available. Touch All Bookmarks to open Opera Mobile and add, view or delete web favorites. For more information about using Opera Mobile, see Chapter 8.
TouchFLO™ 3D To set an album as a Favorite 1. On the Photos and Videos tab, touch Album to open the Album program. 2. Touch Albums and then select one of the listed favorite albums. 3. Tap Menu > Set as Favorite. and then tap OK on the confirmation screen. To view photos and videos Touch here to take a photo. Touch the photo or video on the screen to view or play it in full screen. Touch here to open the Album program. (See “Viewing Photos and Videos Using Album” in Chapter 11 for details.
TouchFLO™ 3D 77 Music The Music tab allows you to visually browse through albums and music tracks and play music. The albums and music tracks that you see on the Music tab are from the Now Playing list of the Library. Note Your device searches for all music files that have the following audio formats: AMRNB/WB (.awb), MP3 (.mp3), WMA (.wma), AAC/AAC+/eAAC+ (.aac), and MPEG-4 (.m4a). It searches for music from the following locations: Device: \My Music (including all subfolders) \My Documents (including al
TouchFLO™ 3D To advance forward or backward in the music Touch and hold on the thin bar below the album art to display the progress bar: Drag your finger right or left on the progress bar to move forward or backward in the current music. To set repeat and shuffle modes Touch Menu > Repeat and choose whether to repeat once, repeat all, or do not repeat. To toggle shuffle mode on and off, touch Menu > Shuffle and then select Shuffle On or Shuffle Off.
TouchFLO™ 3D 79 To use playlists You can group your favorite music into a playlist and then play back the playlist. • To create a new playlist: 1. Select the desired music on the Music tab or the Library. 2. Touch Menu > Add to Playlist. 3. Touch , enter a Playlist name and then touch OK. • To add more music files to a playlist: 1. On the Playlists tab, touch a playlist to open it. 2. Touch Menu > Edit. 3. Touch Menu > Add. 4.
TouchFLO™ 3D Windows Media® Player playlists Custom playlists Note If a Windows Media® Player playlist contains a combination of music, video and image files, only music files in the playlist will be synchronized to your device and other media types will be filtered out. Weather The Weather tab shows you the current weather as well as weather information for the next five days of the week. To add a city The Weather tab can display weather information of your local city and other added cities.
TouchFLO™ 3D 81 You can also slowly scroll through the country list by dragging your finger upward on the screen. Touch the desired country to select it. 3. The Select City screen then appears. Flick your finger on the screen or use the Quick Scroll bar on the right of the screen to choose the city. You can also slowly scroll through the city list by dragging your finger upward on the screen. Touch the desired city to select it.
TouchFLO™ 3D To choose download options 1. On the Weather tab, touch Menu > Settings. Tip You can also slide to the Settings tab and then touch Data. 2. You can choose from the following options: • Download weather automatically. When this option is selected, weather information is automatically downloaded from the AccuWeather web site whenever you select the Weather tab, if the data has not been updated within the last three hours.
TouchFLO™ 3D 83 Programs The Programs tab allows you to add your favorite programs for one-touch access. Touch a program icon to open the corresponding program. Touch an empty slot to add a favorite program. Touch All Programs to access all the programs of your device. Touch Remove to choose which program to remove from the Programs tab. When you have filled up the screen with programs, scroll down the Programs tab to access more empty slots and add more programs.
TouchFLO™ 3D 3.3 Finger Gestures You can use finger gestures to scroll, zoom and pan on the touch screen. Finger scrolling Finger scrolling can be used to scroll up and down web pages, documents, and lists such as the contacts list, file list, message list, calendar appointments list, and more. When finger scrolling, swipe or flick your finger on the touch screen. To scroll up and down • To scroll down, swipe your finger upward on the touch screen.
TouchFLO™ 3D 85 To scroll left and right • To scroll towards the right, swipe your finger to the left. To scroll towards the left, swipe your finger to the right. • To auto-scroll, flick your finger left or right. Touch the screen to stop scrolling. Finger zooming The type of finger gesture to use when zooming varies in different programs. • To zoom in on a web page in Opera Mobile, tap your finger twice on the screen. See “Using Opera Mobile” in Chapter 8 for details.
TouchFLO™ 3D
Chapter 4 Entering Text 4.1 Entering Information 4.2 Using the Full QWERTY 4.3 Using the Compact QWERTY 4.4 Using the Phone Keypad 4.5 Using Multitap and T9 Modes 4.6 Using Numeric and Symbol Mode 4.7 Using Block Recognizer 4.8 Using Letter Recognizer 4.
Entering Text 4.1 Entering Information When you start a program or select a field that requires text or numbers, the Input Panel icon becomes available on the menu bar. Tap the Input Selector arrow (that appears next to the Input Panel icon) to open a menu where you can select a text input method and customize input options. After selecting a text input method, the corresponding Input Panel is displayed, which you can use to enter text. Tip Select Other Input Methods to display more input methods.
Entering Text 89 Icon Notes Input method Icon Input method Full QWERTY Letter Recognizer or Block Recognizer Compact QWERTY Transcriber Phone Keypad Keyboard • Some text input methods may not be available in certain language versions of the device. • When in landscape mode, the Compact QWERTY and Phone Keypad are not available. 4.2 Using the Full QWERTY The Full QWERTY is a full on-screen QWERTY keyboard layout similar to a desktop PC keyboard.
Entering Text • Tap to enter letters or symbols. • Tap and hold to enter a punctuation mark, symbol, or number that appears on top of a key. Displays the word candidate list in T9 mode. Tap a word to insert it into your text. Tap to add a word to the T9 dictionary. • Tap to enter an uppercase letter. • Tap twice to turn on Caps Lock. Tap to delete the previous character. Tap to create a new line. Tap to toggle between using Normal or T9 mode.
Entering Text 91 4.3 Using the Compact QWERTY The Compact QWERTY is a type of on-screen keyboard which features 20 keys. With its large, touch-friendly keys and enhanced features such as T9 predictive input, you can enter text faster and more accurately. • Tap to enter letters or symbols. • Tap and hold to enter a punctuation mark, symbol, or number that appears on top of a key. Displays the word candidate list in T9 mode. Tap a word to insert it into your text. Tap to add a word to the T9 dictionary.
Entering Text 4.4 Using the Phone Keypad The Phone Keypad is a 12-key on-screen keypad that has a layout similar to mobile phone keypads, plus some additional keys. The Phone Keypad has large keys and enhanced input features such as T9 predictive input, which makes it faster for you to enter text in your messages and documents. Displays the word candidate list in T9 mode. Tap a word to insert it into your text. Tap to add a word to the T9 dictionary. • Tap to enter letters or symbols.
Entering Text 93 4.5 Using Multitap and T9 Modes When using the on-screen keyboards, you can choose to enter text using Multitap or T9 mode. Multitap mode In Multitap mode (for Compact QWERTY and Phone Keypad), enter a character by tapping a key until the desired character is displayed on the screen. • To enter the first letter that shows on a key, tap the key once. To enter the second letter, tap twice.
Entering Text To add a word to the T9 dictionary If the word that you have entered is not found in the dictionary, you can add it to the dictionary. 1. While in T9 mode, type a letter and then tap candidate list. on right side of the word 2. Type the word you want to add and then tap ADD. Tap to cancel word addition. To customize Touch Input settings 1. Tap the Input Selector arrow, then tap Touch Input Settings. 2.
Entering Text 95 4.6 Using Numeric and Symbol Mode Switch to Numeric and Symbol mode to let you easily enter numbers and common symbols such as parentheses, braces, currency signs, punctuation marks, special characters, and more. Numeric and Symbol mode is available when using the Full QWERTY, Compact QWERTY, and Phone Keypad. Tap a number or symbol to insert it into your text. Tap to go to the previous or next page of symbols. See “To lock the keyboard in Numeric and Symbol mode.
Entering Text Tip In Compact QWERTY and Phone Keypad, tap / to toggle between locking the keyboard in Numeric and Symbol mode and switching back to the letter keyboard layout after tapping a symbol or number. 4.7 Using Block Recognizer With Block Recognizer, you use a single stroke to write letters, numbers, symbols, and punctuation, which are then converted into typed text. To use Block Recognizer 1. From a program, tap the Input Selector arrow and then tap Other Input Methods > Block Recognizer. 2.
Entering Text 97 • • • Tip Enter lowercase letters by writing in the abc (middle) area of the box. Enter numbers by writing in the 123 (right) area of the box. Enter punctuation and symbols by writing the desired character in the 123 (right) area of the box. For help with writing characters, tap the question mark near the writing area. 4.9 Using Transcriber Transcriber is a handwriting recognition program that enables you to write in cursive, print, or a combination of both. To write using Transcriber 1.
Entering Text To edit text 1. In a program, draw a line from left to right across the text you want to edit. 2. After you lift the stylus from the screen, the line disappears and the selected text will be highlighted. 3. Do either of the following: • Rewrite the text. • Use gestures to capitalize letters, insert a space, and so on. For information about using Transcriber gestures, see Help on your device.
Chapter 5 Synchronizing Information With Your Computer 5.1 About Synchronization 5.2 Setting Up Windows Mobile® Device Center on Windows Vista® 5.3 Setting Up ActiveSync® on Windows XP® 5.4 Synchronizing With Your Computer 5.5 Synchronizing via Bluetooth 5.
Synchronizing Information With Your Computer 5.1 About Synchronization You can take information from your computer wherever you go by synchronizing them to your device.
Synchronizing Information With Your Computer 101 Bluetooth. For more information about setting up a Bluetooth partnership, see Chapter 9. For information about synchronizing through Bluetooth, see “Synchronizing via Bluetooth” later in this chapter. Try to synchronize regularly in order to keep information up-to-date in both your device and your computer. Notes • You can also synchronize Outlook e-mail, contacts, calendar, and tasks on your device with the Exchange Server at your work.
Synchronizing Information With Your Computer 3. On the Windows Mobile Device Center’s Home screen, click Set up your device. Note Choose Connect without setting up your device if you only want to transfer media files, check for updates, and explore your device but not synchronize Outlook information. 4. Select the items you want to synchronize, then click Next. 5. Enter a device name, then click Set Up.
Synchronizing Information With Your Computer 103 Use Windows Mobile Device Center To open Windows Mobile Device Center, click Start > All Programs > Windows Mobile Device Center on your Windows Vista computer. On Windows Mobile Device Center, you can do the following: • Click Mobile Device Settings to change synchronization settings.
Synchronizing Information With Your Computer 5.3 Setting Up ActiveSync® on Windows® XP The Getting Started disc that comes with your device contains Microsoft ActiveSync 4.5 or later. Follow the steps in this section to install and set up ActiveSync on Windows XP or other compatible Windows systems. Note For a list of compatible Windows systems, go to http://www.microsoft.com/windowsmobile/activesync/activesync45.mspx. Install ActiveSync 1.
Synchronizing Information With Your Computer 105 When you finish the wizard, ActiveSync synchronizes your device automatically. Notice that Outlook e-mails and other information appear on your device after synchronization. 5.4 Synchronizing With Your Computer Connect and synchronize your device with your computer using the USB cable or Bluetooth connection. Start and stop synchronization You can manually synchronize either from your device or computer.
Synchronizing Information With Your Computer Change which information is synchronized You can change the information types and the amount of information to synchronize for each type either on your device or your computer. Follow the steps below to change synchronization settings on your device. Note Before changing synchronization settings on your device, disconnect it from your computer. 1. In ActiveSync on your device, tap Menu > Options. 2.
Synchronizing Information With Your Computer 107 Troubleshoot sync connection problem In some cases, when the computer connects to the Internet or a local network, it may disconnect the connection with your device in favor of the Internet or network connection. If this happens, tap Start > Settings > Connections tab > USB to PC, then clear the Enable advanced network functionality check box. This makes your computer utilize a serial USB connection with your device. 5.
Synchronizing Information With Your Computer 5.6 Synchronizing Music and Video If you want to carry your music or other digital media along with you while you travel, set up Windows Media® Player on your computer to synchronize music and video with your device. Other than selecting the Media information type to be synchronized, all media synchronization settings must be set in Windows Media® Player.
Chapter 6 Exchanging Messages 6.1 Messaging 6.2 Text Messages 6.3 Types of E-mail Accounts 6.4 E-mail Setup Wizard 6.
Exchanging Messages 6.1 Messaging Messaging is a central location where you will find all types of messaging accounts, which include text messages (SMS) and e-mail accounts. To select a messaging account Do one of the following: • On the TouchFLO 3D Home screen, slide to the Mail tab and then touch Menu > Accounts > Accounts. The Account Picker screen then opens where you can select an account. Tip • You can also tap Start > Messaging to access the Account Picker screen.
Exchanging Messages 111 3. Select a messaging account in which to add a signature. 4. Select the Use signature with this account check box. 5. In the provided text box, enter the information that will be displayed as your signature. 6. If you want the signature to be added whenever you reply or forward messages, select the Use when replying and forwarding check box, then tap OK. 7. Repeat the steps to add a signature to other messaging accounts. 6.
Exchanging Messages From the Contacts screen 1. Tap Start > Contacts. 2. Tap the contact’s name to open his or her contact card. 3. Touch Send text message. Compose and send a text message After creating a new text message, follow the steps below to enter your message and then send it. 1. To add recipients, enter their mobile phone numbers in the To field, separating them with a semicolon. You can also tap To or tap Menu > Add Recipient to add mobile phone numbers from Contacts.. 2. Enter your message.
Exchanging Messages 113 To reply to a text message 1. In the Text Messages inbox, tap a message thread to open it. 2. At the bottom of the screen, type your reply message and then tap Send.
Exchanging Messages To copy a message in the thread to the SIM card 1. In the Text Messages inbox, tap the message to open it. 2. Select a message in the thread that you want to copy to the SIM card. Note You cannot copy a sent message from the thread to the SIM card. 3. Tap Menu > Copy to SIM. To copy a text message from the SIM card to the device 1. In the Text Messages inbox, select the SIM message you want to copy. 2. Tap Menu > Copy to Phone.
Exchanging Messages 115 6.3 Types of E-mail Accounts You can set up the following types of e-mail accounts on your device: • Outlook e-mail that you sync with your computer or the Exchange Server. • E-mail account that you have from an Internet Service Provider (ISP) or other e-mail provider. • Web-based e-mail accounts such as Gmail®, Yahoo!® Mail Plus, AOL®, and others. • Work account that you access using a VPN connection.
Exchanging Messages 6.4 E-mail Setup Wizard Windows Mobile’s E-mail Setup wizard walks you through the process of setting up your e-mail account. It has an Auto Setup feature which can automatically set up your e-mail account based on the e-mail address and password that you enter, if your e-mail provider settings are preconfigured on your device.
Exchanging Messages 117 Note If the E-mail Setup wizard was unsuccessful in finding and downloading settings from the Internet, select Internet e-mail from the Your e-mail provider list on the next screen. You will be asked to enter e-mail server settings. See “To specify e-mail server settings” for details. 5. In the Automatic Send/Receive list, choose how frequent you want e-mail messages to be automatically sent and downloaded on your device.
Exchanging Messages Options Automatic Send/Receive Download messages Send/receive when I click Send Use automatic send/ receive schedule when roaming When deleting messages Message format Message download limit Description You can select a time interval for connecting to the Internet automatically to send and receive messages. Set the number of days of messages that you want to be downloaded to your device. By default, messages are immediately delivered when you tap Send.
Exchanging Messages 119 4. In Your e-mail provider, select Custom domain and then tap Next. 5. Enter the domain of your e-mail provider and then tap Next. 6. The E-mail Setup wizard then tries to find the e-mail provider settings on your device or from the Internet. If the settings are found, it shows a successful message. Tap Next. 7. Enter Your name and the Account display name and then tap Next.
Exchanging Messages Tip To choose from other e-mail accounts that are not displayed on the Mail tab, touch Menu > Accounts > Accounts and then select an e-mail account from the Account Picker screen. 3. Touch the New E-mail icon ( ) to create a new e-mail. To send an e-mail to a favorite contact 1. On the TouchFLO 3D Home screen, slide to the People tab. 2. Swipe your finger on the screen to flip through the photos of your favorite contacts. 3.
Exchanging Messages 121 To add an attachment to a message 1. In the message that you are composing, tap Menu > Insert and tap the item you want to attach: Picture, Voice Note, or File. 2. Select the file or picture you want to attach, or record a voice note. Filter the Inbox message list When the Inbox on your device is full of messages, you can filter your Inbox to display only the messages that contain a particular sender or subject you are searching for.
Exchanging Messages To download a complete e-mail message, open the e-mail and then do one of the following: • Finger-scroll to the end of the message, and tap Get entire message and any attachments (POP3 e-mail account) or tap Get the rest of this message (IMAP4 and Outlook e-mail accounts). • Tap Menu > Download Message.
Exchanging Messages 123 To reply to or forward a message 1. Open the message and tap Menu > Reply, Menu > Reply All, or Menu > Forward. 2. Enter your response, then tap Send. Notes • You can receive and view HTML e-mails from any type of e-mail account. The HTML format is retained, without layout shifting or resizing. HTML e-mail support in Outlook Mobile is available only if you are synchronizing your device with Microsoft Exchange Server 2007.
Exchanging Messages Customize e-mail settings To change the download size and format for Outlook e-mail 1. Disconnect your device from the computer. 2. Tap Start > Programs > ActiveSync. 3. Tap Menu > Options, select E-mail, then tap Settings. 4. On the E-mail Sync Options screen: • Under Message format, select HTML or Plain Text. HTML is only available when connected to Microsoft Exchange Server 2007 or later. • Under Download size limit, select the desired e-mail size. 5.
Exchanging Messages 125 To automatically receive attachments on IMAP4 e-mails 1. Tap Menu > Options on the Account Picker screen, or tap Menu > Tools > Options while you’re in a message list. 2. Tap the name of your IMAP4 e-mail account. 3. Tap Download Size Settings. 4. In Download attachments: • Select All attachments to always download file attachments; or • Select a file size limit for auto-downloading attachments. 5. Tap Done. To store attachments on the storage card 1. Tap Start > Messaging. 2.
Exchanging Messages
Chapter 7 Working With Company E-mails and Meeting Appointments 7.1 Synchronizing with the Exchange Server 7.2 Working With Company E-mails 7.3 Managing Meeting Requests 7.
Working With Company E-mails and Meeting Appointments 7.1 Synchronizing with the Exchange Server To keep up-to-date with your company e-mails and meeting schedules while you’re out of the office, you can connect your device to the Internet through WiMAX, Wi-Fi, or a data connection and synchronize with your company’s Exchange Server.
Working With Company E-mails and Meeting Appointments 129 9. Select the items that you want to sync with the Exchange Server. Tips • To change synchronization settings of an information item, for example, E-mail, select the item, then tap Settings. • To change the rules for resolving synchronization conflicts, tap Menu > Advanced. 10.Tap Finish.
Working With Company E-mails and Meeting Appointments 7.2 Working With Company E-mails Your device gives you instant access to your company e-mails and lets you manage your messages easier. Direct Push, Fetch Mail, Remote e-mail search, and e-mail flags are just some of the tools you can use to manage your e-mails. Note Some messaging features depend on the Microsoft Exchange Server version used in your company. Check with your network administrator for the availability of these features.
Working With Company E-mails and Meeting Appointments 131 Scheduled synchronization If you do not want to use Direct Push, you can set a regular schedule for synchronizing Outlook e-mail and information. 1. In ActiveSync on your device, tap Menu > Schedule. 2. Select a shorter time interval in the Peak times box for you to be able to receive e-mails more frequently. (Peak times usually refer to your working hours when e-mail volume is high). 3. Select a longer interval in the Off-peak times box.
Working With Company E-mails and Meeting Appointments Notes • For information about changing e-mail sync options such as setting the download size for e-mail, see "Customize e-mail settings" in Chapter 6. • When you receive an e-mail that contains a link to a document such as a PDF or Microsoft Office document located on SharePoint or an internal file server, you can tap the link to view the document on your device.
Working With Company E-mails and Meeting Appointments 133 Flag your messages Flags serve as a reminder for you to follow-up on important issues or requests contained in e-mail messages. Flagging messages, which has been a useful feature on desktop Outlook E-mail, can also be done in Outlook Mobile on your device. You can flag received e-mail messages on your device. Requirement Flags are enabled only if e-mails are synchronized with Microsoft Exchange Server 2007 or higher.
Working With Company E-mails and Meeting Appointments Out-of-office auto-reply Outlook Mobile allows you to retrieve and change your out-of-office status. Just like desktop Outlook E-mail, Outlook Mobile automatically sends an autoreply message when you’re not available. To send out-of-office auto-reply messages 1. Tap Start > Messaging > Outlook E-mail. 2. Tap Menu > Tools > Out of Office. 3. In the I am currently list, select Out of the Office. 4. Enter your auto-reply message, then tap Done. 7.
Working With Company E-mails and Meeting Appointments 135 Tips • Before responding, you can check your availability during the time of the requested meeting by tapping View your calendar. • If the time of the meeting conflicts with your other appointments, a “Scheduling Conflict” status appears on top of the e-mail. 3. Choose whether or not to edit your response e-mail before sending, then tap OK.
Working With Company E-mails and Meeting Appointments Tips • For information about creating a meeting request, see “To send a meeting request” in Chapter 12. • To view an attendee’s contact information, tap the attendee’s name. If the attendee is included in your contacts list, you will see the contact information immediately. If the attendee is not in your contacts list, tap Company Directory to view the contact information. 7.
Working With Company E-mails and Meeting Appointments 137 • In a new e-mail message, tap the To box (or tap Menu > Add Recipient), then tap Company Directory on the top of the list. • When creating a meeting request and selecting required and optional attendees in Calendar, tap Company Directory.
Working With Company E-mails and Meeting Appointments 3. Enter a partial or full contact name and tap Search. In the search results list, tap a contact to select it. Notes • You can save a contact from the Company Directory to your device by selecting the contact, then tapping Menu > Save to Contacts. • You can search on the following information as long as that information is included in the Company Directory: First name, Last name, E-mail name, Display name, E-mail address, or Office location.
Chapter 8 Internet 8.1 Ways of Connecting to the Internet 8.2 Starting a Data Connection 8.3 Using Opera Mobile™ 8.4 Using YouTube™ 8.5 Using Windows Live™ 8.6 Using RSS Hub 8.
Internet 8.1 Ways of Connecting to the Internet Your device’s networking capabilities allow you to access the Internet or your corporate network at work through one of the following connections: • Mobile WiMAX • Wi-Fi • EDGE (or GPRS) • Dial-up Note You can also add and set up the following connections: • VPN: A VPN connection is used to access your corporate network by using an existing Internet connection.
Internet 141 To check the WiMAX network status You can check the current WiMAX connection status from any of the following screens of your device: • Title bar When you enable WiMAX on your device, the WiMAX connecting icon ( ) appears on the Title bar. Once your device successfully connects to a WiMAX network, the icon changes to ( ). • WiMAX settings screen On the Home screen, slide to the Settings tab and then tap All Settings > Connections tab > WiMAX.
Internet Note You cannot connect to a Wi-Fi and a WiMAX network simultaneously. When you turn on Wi-Fi while your device is connected to a WiMAX network, a message appears prompting you to disconnect the WiMAX connection first. See “Mobile WiMAX” in this chapter to know how to turn WiMAX on or off. To connect to a Wi-Fi network After Wi-Fi is turned on, your device scans for available Wi-Fi networks in your area. 1.
Internet 143 Next time you use your device to detect Wi-Fi networks, you will not see the pop-up message windows again, and you will not be prompted to enter the network key of the previously accessed Wi-Fi network (unless you perform a hard reset which will erase custom settings on your device). Note Wi-Fi networks are self-discoverable, which means no additional steps are required for your device to connect to a Wi-Fi network.
Internet • Wireless LAN screen On the Home screen, slide to the Settings tab and then tap Menu > Wireless Networks. On the Main tab, you will see the Wi-Fi network that your device is currently connected to. The configuration and signal quality of the Wi-Fi network are also shown. • Configure Wireless Networks screen On the Home screen, slide to the Settings tab and then tap All Settings. In the Connections tab, tap Wi-Fi. This screen displays the Wi-Fi networks currently available.
Internet 145 To save battery power while connected to a Wi-Fi network Using Wi-Fi quickly consumes battery power. Turn off Wi-Fi when not in use. You can also enable power saving settings. 1. On the Home screen, slide to the Settings tab. 2. On the Settings screen, tap Menu > Wireless Networks > Power Mode tab. 3. On the Power Mode tab, move the Power Save Mode slider to a position that optimizes performance with the least power consumption.
Internet To add a new EDGE/GPRS connection When you need to add another EDGE/GPRS connection on your device, obtain the Access point name from your wireless service provider. Also, check if the EDGE/ GPRS network requires a user name and password. 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. 3. 4. 5. On the Connections tab, tap Connections. In My ISP, tap Add a new modem connection. On the Make New Connection screen, enter a name for the connection.
Internet 147 Dial-up To set up a dial-up connection to your Internet Service Provider (ISP) on your device, you need the same settings that you normally use when you dial up from your computer. This includes the ISP server phone number, your user name and password. 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. On the Connections tab, tap Connections. 3. In My ISP, tap Add a new modem connection. 4. In the Select a modem list, select Cellular Line, then tap Next. 5.
Internet To disconnect active data connections 1. Tap Start > Programs > Comm Manager. 2. Tap the Data Connection button. 8.3 Using Opera Mobile™ Opera Mobile™ is a full-featured Internet browser, optimized for use on your device. Note You can also use Internet Explorer® Mobile to browse the web. To open Internet Explorer Mobile, tap Start > Internet Explorer.
Internet 149 1 Refresh. Tap to reload the web page being viewed. 2 Address bar. Enter the URL of the web site here. 3 Back. Tap to go back to the previous web page viewed. 4 Bookmarks. Tap to go to the Bookmarks screen where you can add a bookmark, edit bookmarked web pages, and send the favorite URL link via one of the Messaging accounts. 5 Tabs. Tap to add a new browsing tab or switch to another existing browsing tab. 6 Home. Tap to go to the Home page. 7 Menu.
Internet View web pages While browsing web pages, use finger gestures to pan and zoom on the web page. • To zoom in, tap your finger twice on the screen. To zoom out, tap your finger twice on the screen again. • Tap the Zoom control to open the zoom control bar. Move the slider to the right to zoom in or to the left to zoom out on the page.
Internet 151 Opera Mobile menu On the menu bar, tap to open the menu. Tap to open the Settings screen where you can set the default home page, change display settings, set privacy settings, and more. Tap to view items being downloaded. You can also resume or stop current downloads. Tap to view information about the Web page you are browsing. Tap to see web pages that you have viewed. Tap to manage and view web pages that you have saved. Tap to open the Opera Mobile help file.
Internet 8.4 Using YouTube™ YouTube™ lets you browse, search, and watch video clips from the YouTube server. Note You need an active connection to use YouTube. If you are using a EDGE/GPRS connection, your data connection bill may increase significantly due to large file sizes of the videos. To open YouTube Tap Start > Programs > YouTube. Tap to open the Program Displays the current program Guide list. The Program channel being viewed.
Internet 153 Browse for videos The Program Guide list lets you change the program channel so you can browse different types of videos available on the YouTube server. By default, there is only one channel in the Program Guide. To add a new program channel into the Program Guide list 1. On the YouTube screen, tap . 2. On the Search screen, enter the channel you want to add to the Program Guide list. 3. Tap Search. YouTube searches for the channel and then displays the available videos from it. 4.
Internet To delete a program channel from the Program Guide list You can only delete program channels that you have added to the Program Guide list. 1. On the Videos screen, tap Program Guide. 2. Scroll down to the channel you want to delete and then tap . 3. On the confirmation screen, tap Yes. Watching videos On the Videos, Bookmarks, or History screen, tap a video to launch the YouTube Video Player. Drag to go forward or backward in the video.
Internet 155 Tap to go to the next page of related videos. If no action is taken, it automatically goes to the next page after 10 seconds. Tap to view details about the video you just watched. Tap to go back to the previous page of related videos. Tap to send the link to the video you just watched to another person using one of the Messaging accounts. Tap to add the video to your Bookmarks. Tap to play back the video again.
Internet To delete a video from Bookmarks 1. On the Bookmarks screen, tap Edit. 2. Tap on the video you want to remove from Bookmarks. 3. On the confirmation screen, tap Yes. 4. Tap Done. History View recently watched videos on the History screen. To view History On the YouTube screen, tap watch it. Note . Tap a video to To clear the History list, tap Clear.
Internet 157 8.5 Using Windows Live™ Windows Live™ gives you a full Internet experience on your device. Windows Live™ helps you to find information, pursue your interests, and get in touch with friends and family on the Internet easier. Windows Live™ offers the following key features: • Live Search Bar, which lets you search for information on the web. • Live Messenger, the next generation of MSN Messenger Mobile. • Live Mail, the next generation of Hotmail.
Internet 5. Choose what information you want to sync online with your device. If you select Store Windows Live contacts in your mobile phone’s contact list, your Windows Live™ contacts will be added to the contact list and to Windows Live™ Messenger on your device. If you select Sync e-mail, your Windows Live™ Mail or Hotmail inbox messages will be downloaded to your device. 6. Tap Next. 7. After synchronization is complete, tap Done.
Internet 159 Windows Live™ Messenger With this mobile version of Windows Live™ Messenger, you enjoy many of the same cool features that you get from the desktop version, which include the following: • • • • • • • • Note Instant messaging via text and voice Multiple conversations Insert emoticons Contact list with presence Send and receive files including photos Change status/display name View contacts by online status, groups, and more Send messages even when a contact is offline Before you can use Window
Internet To sign in and out 1. Tap Sign in on the Messenger screen. 2. If this is your first time to sign in, a message appears to inform you that your messenger contacts will be added to the contact list on your device. Tap OK to add them. Signing in may take several minutes, depending on your connection speed. 3. To sign out, tap Menu > Sign Out. To start and end conversations 1. In the contact list, select a contact, then tap Send IM to open a message screen. 2.
Internet 161 To add a Windows Live™ contact in Contacts 1. On the Home screen, slide to the People tab and then tap All People. 2. Tap New, then tap Windows Live. 3. In the IM box, enter the e-mail address of the contact, which can be a Windows Live ID or any other e-mail address. Tip You can fill in other information about the contact, if desired. This is not necessary if you will communicate with the contact only through Windows Live™ Messenger or Live Mail. 4. Tap OK. 5.
Internet To subscribe to news channels 1. Tap Start > Programs > RSS Hub, then tap Continue. 2. In the New Channel Wizard screen, select the Choose from a list of known Channels option, then tap Next. A list of RSS channels is displayed. Category Channels Tap to load pre-selected RSS channels. Note If the RSS channel you want to subscribe to is not in the list of known channels, tap Back, then select another option on the New Channel Wizard screen.
Internet 163 Tap to select the channel category to display Channel is updated. Tap it to view the headlines. Channel list Headline count Tap to update the channels Tap to cancel channel updating To add new channels 1. In the channel list, tap Menu > Channel > New to open the New Channel Wizard screen. 2. Select an option, then follow screen instructions to add new channels. For more information on New Channel Wizard options, see Help on your device.
Internet Manage channel categories To view all the channels in a particular category, tap All Categories in the upper left area of the channel list, then tap the category you want to display. To add a new category, tap Menu > Categories in the channel list to display all categories, then tap Menu > New. To rename or delete a category, tap Menu > Categories in the channel list to display all categories, select a category, then tap Menu > Rename or Menu > Delete.
Internet 165 New or unread headlines display in bold and are marked with a blue newspaper icon. Headlines that have been read are marked with a gray newspaper icon. View the news summary Tap a headline in the headline list to display the news summary. Channel name Headline and read status Audio/Video/Image file attachment. Tap to download the file. News summary Tap to open the news item in Opera Mobile. See “Using Opera Mobile” in this chapter for details.
Internet To download, play, or save podcasts 1. When you see an audio or video file attachment in the news summary, do one of the following to download the file: • Tap Menu > Podcasts > Start Download. • Tap the Download audio/Download video link below the audio/video file icon. Tip To cancel the file download, tap Menu > Podcasts > Cancel Download, or tap Cancel download below the audio/video file icon. 2.
Internet 167 For more information about the features and how to configure RSS Hub, refer to the online help. To open the online help, tap Start > Help while in RSS Hub. 8.7 Using Your Device as a Modem (Internet Sharing) Internet Sharing connects your desktop or notebook computer to the Internet by using your device’s data connection (WiMAX, EDGE, or GPRS, for instance). You can choose to connect via USB or Bluetooth.
Internet To set up your device as a USB modem 1. On your device, tap Start > Programs > Internet Sharing. 2. In the PC Connection list, select USB. 3. In the Network Connection list, select the name of the connection that your device uses to connect to the Internet. 4. Connect your device to the computer using the USB cable. 5. Tap Connect.
Internet 169 7. On your computer, set up a Bluetooth Personal Area Network (PAN) with your device: For Windows Vista: a. Click Start > Control Panel > Network and Internet > Network and Sharing Center. b. Click Manage network connections and then under Personal Area Network, double-click Bluetooth Network Connection. c. In the Bluetooth Personal Area Network Devices dialog box, select your device, then click Connect. For Windows XP: a. Tap Start > Control Panel > Network Connections. b.
Internet Set up your device as a WiMAX modem You can use your device to connect your desktop or notebook computer to the Internet using your WiMAX connection. Note Make sure that you are within a WiMAX coverage area before you set up your device as a WiMAX modem. 1. Turn on WiMAX on your device. See “Mobile WiMAX” earlier in this chapter to know how to turn WiMAX on. 2. Connect the device to your desktop or notebook computer using the USB sync cable. 3.
Chapter 9 Bluetooth 9.1 Bluetooth Modes 9.2 Bluetooth Partnerships 9.3 Connecting a Bluetooth Hands-free or Stereo Headset 9.4 Beaming Information Using Bluetooth 9.
Bluetooth 9.1 Bluetooth Modes Bluetooth is a short-range wireless communications technology. Devices with Bluetooth capabilities can exchange information over a distance of about eight meters without requiring a physical connection. Bluetooth on your device operates in three different modes: • On. Bluetooth is turned on. Your device can detect other Bluetooth-enabled devices, but not vice versa. • Visible. Bluetooth is turned on, and all other Bluetooth-enabled devices can detect your device. • Off.
Bluetooth 173 To turn off Bluetooth visibility after a certain period of time You can automatically turn off Bluetooth visibility after a specified period of time. 1. On the Home screen, slide to the Settings tab and then tap Menu > Bluetooth Devices > Timeout tab. 2. In Turn off Visible mode, select the time before your device’s Bluetooth visibility turns off. Tap OK. 9.
Bluetooth Note Creating a Bluetooth partnership between two devices is a one-time process. Once a partnership is created, the devices can recognize the partnership and exchange information without entering a passcode again. To accept a Bluetooth partnership 1. Ensure that Bluetooth is turned on and in visible mode. 2. Tap Yes when prompted to establish a partnership with the other device. 3.
Bluetooth 175 2. On the Home screen, slide to the Settings tab and then tap Menu > Bluetooth Devices > Devices tab > Add new device. 3. Tap the name of the Bluetooth headset, then tap Next. The device will automatically pair the device with the Bluetooth headset. Windows Mobile will automatically try one of the preconfigured passcodes (0000, 1111, 8888, 1234) to pair the Bluetooth headset with the device. If this fails, you have to enter the passcode delivered with your headset manually.
Bluetooth a. On your computer, open Bluetooth Devices from the Control Panel, then click the Options tab on the Bluetooth Devices window. b. For Windows Vista, select Allow Bluetooth devices to find this computer. For Windows XP, select Turn discovery on and Allow Bluetooth devices to connect to this computer. c. Create a Bluetooth partnership between your device and computer. For information about creating a partnership, see “Bluetooth partnerships”. d.
Bluetooth 177 9.5 Printing Files via Bluetooth Connect your device to a Bluetooth printer to print contact information, appointment details, images, and other file types. Note You can print files in the .txt, .jpg, .xhtml, .vcf, .vcs file formats. Before you start printing, make sure to turn on the Bluetooth printer and to turn on Bluetooth on your device. To turn on Bluetooth, tap Start > Programs > Comm Manager, then tap the Bluetooth button. To print contact information 1.
Bluetooth To print a text file 1. In File Explorer, locate the text file you want to print. 2. Tap and hold the txt file and then on the menu, tap Print via Bluetooth. 3. Follow steps 3 to 5 in the “To print contact information” procedure.
Chapter 10 Navigating on the Road 10.1 Google™ Maps 10.2 Guidelines and Preparation for Using GPS 10.
Navigating on the Road 10.1 Google™ Maps Google™ Maps lets you track your current location, view real-time traffic situations, and receive detailed directions to your destination. It also provides a search tool where you can locate places of interest or an address on a vector or a satellite map. Note You need an active data connection, or a WiMAX/Wi-Fi connection to use Google Maps. Open Google Maps Tap Start > Programs > Google Maps.
Navigating on the Road 181 Search for a place of interest You can search and locate a place of interest using Google Maps. Google Maps also shows the contact information and gives directions on how to get to the place of interest from your current location. Note You can also search for keywords, addresses, and postal codes. 1. On the Google Maps screen, tap Search. 2. Enter the place of interest you want to go to (for example, hotels in Moscow), then tap OK. 3.
Navigating on the Road 4. On the Address tab, you can: • Tap Go to web site to open the web site of the place of interest. Note This information only appears when the web site of the place of interest is available. • Tap the [phone number] to call the place of interest that you have selected. • Tap Directions to here or Directions from here to get directions on how to get to the place of interest from your current location or vice versa.
Navigating on the Road 183 1 Do not place where it will block the driver’s vision. 2 Do not place where air bags could deploy. 3 Do not place anywhere in the vehicle without securing the device in the holder. • Please use the GPS system cautiously. Users shall be liable for any damages resulting from negligent operation of the system. • The GPS signal cannot pass through solid non-transparent objects.
Navigating on the Road 10.3 Downloading Satellite Data via QuickGPS Before you start using your device for GPS navigation, open the QuickGPS program first to download ephemeris data (current satellite position and timing information) onto your device. This data is needed to determine the GPS position of your current location. QuickGPS downloads ephemeris data from a web server, instead of from the satellites, using the Internet connection on your device, which can be via Wi-Fi, ActiveSync or EDGE/GPRS.
Navigating on the Road 185 Download options To configure download times, tap Menu > Options and choose from the available options: • Remind me when data expires. Enables your device to display a reminder message when the validity of the ephemeris data has expired. When you see the reminder message, tap Menu to dismiss the reminder or to set the snooze time so that you will be reminded again. Tap OK to open the QuickGPS program and download the latest data. • Auto download when data expires.
Navigating on the Road
Chapter 11 Experiencing Multimedia 11.1 Taking Photos and Videos 11.2 Viewing Photos and Videos Using Album 11.3 Using Windows Media® Player Mobile 11.4 Using FM Radio 11.
Experiencing Multimedia 11.1 Taking Photos and Videos Use Camera to take photos and record video clips. You can either use the main (back) camera or second (front) camera to take photos or shoot videos. To open the Camera screen On the Home screen, slide to the Photos and Videos tab and then tap the camera ). The screen orientation automatically switches to landscape mode when icon ( you open Camera. Tip You can also tap Start > Programs > Camera to open the Camera program.
Experiencing Multimedia 189 You can select from the following capture modes: Icon Capture Mode Photo Captures standard still images. Video Captures video clips, with or without accompanying audio. Panorama Captures a sequence of still images continuously in one direction, and allows stitching of all the images to create a panoramic view of a scenery. Contacts Picture Captures a still image and gives you the option to immediately assign it as a Photo ID for a contact.
Experiencing Multimedia Camera controls The camera comes with an auto-focus function to let you capture sharp and crisp photos and videos of your subjects. Depending on the Shoot Option you have chosen, you will need to either touch or touch and hold the Virtual Camera button ( ) at the right side of the screen to activate auto-focus. When auto-focus is ). When focus is set, the activated, it is indicated by a flashing white bracket ( ).
Experiencing Multimedia 191 On-screen controls and indicators Tap the screen to display the controls and indicators. When capturing in Photo, Video, and Contacts Picture modes 1 2 5 6 When capturing in Video mode 3 7 4 9 8 1 Zoom control. Tap to zoom in, or to zoom out. You can also tap and hold these onscreen buttons to continuously zoom in or out on your object. Note This control appears only when zooming is supported by the Resolution you have selected. See “Zooming” for details.
Experiencing Multimedia 6 Capture mode. Displays the current capture mode. Tap to open an on-screen menu where you can choose the capture mode. 7 Menu. Tap to open the Menu Panel. See “Menu Panel” for details. 8 Virtual Camera button. This on-screen button activates auto-focus and functions as the shutter release button. 9 Recording indicator. Flashes when recording a video. 10 Template Selector icon. In Picture Picture Theme mode Theme mode, tap to toggle among different templates.
Experiencing Multimedia 193 1 2 3 4 5 6 1 Resolution. Select the resolution to use when taking photos or capturing videos. Refer to the resolution table in this chapter. 2 White Balance. White balance enables the camera to capture colors more accurately by adjusting to different lighting conditions. White balance settings include: Auto ( ), Daylight ( ), Night ( ), Incandescent ( ), and Fluorescent ( ). 3 Brightness. Tap to open the Brightness bar at the bottom of the screen.
Experiencing Multimedia Zooming Before capturing a photo or a video clip, you can zoom in to make the object in focus move closer, or zoom out to make the object move farther away. To zoom in or out to zoom in or tap to zoom out. You can also tap and hold these onscreen Tap buttons to continuously zoom in or out on your object. The camera zoom range for a photo or a video clip depends on the capture mode and resolution. Refer to the table for more information.
Experiencing Multimedia 195 Capture mode Picture Theme Note Resolution Determined by the current template Zoom range Depends on the size of the selected template The capture size settings and zoom ranges are only for the main camera. The Review screen After capturing, the Review screen lets you view, send, or delete the photo or video clip by tapping an icon. Icon Function Back Return to the live Camera screen. Delete Delete the captured image or video.
Experiencing Multimedia Advanced Options The Advanced Options let you adjust options for your selected capture mode and set Camera program preferences. Access the Advanced Options by tapping Advanced on the Menu Panel. You can tap on-screen to navigate through the Advanced Options screen. Tap an item to change the setting. Tap to go back to the Camera screen. Tap to go through the different Advanced Camera Settings screens. • Review Duration.
Experiencing Multimedia 197 • Keep Backlight. Turn the backlight on or off. This overrides your device backlight settings while you are using the camera. • Shutter Sound. Choose whether or not you want the camera to make a shutter sound when you press the Virtual Camera button. • Shoot Option. The camera comes with an auto-focus feature that is activated when the Virtual Camera button is either touched or touched and held. • • Touch (Default).
Experiencing Multimedia Choose either Center Area to measure light using the center area of the subject, or Average to measure light using the area around the subject. • Prefix. When Default is selected as the prefix, the file name of each new captured file is set to “IMAGE” or “VIDEO” followed by a sequential number, for example: IMAGE_001.jpg. You may also choose to name files using either the current Date or Date & Time as the prefix.
Experiencing Multimedia 199 • Template (Picture Theme mode). Select a template. • Recording Limit (Video mode). Set the maximum duration or file size for recording video. Template Folder (Picture Theme mode). By default, templates are stored in the \My Documents\Templates folder on the device’s Main Memory. If you transferred some templates to a storage card (via File Explorer), set this option to Main + Card to specify that templates are located in both the main memory and the storage card.
Experiencing Multimedia To open Album Do one of the following: • On the Home screen, slide to the Photos and Videos tab and tap Album. . • In the Camera program, tap • Tap Start > Programs > Album. Note Tap to open the Camera program. When you open Album from the Camera program, the screen orientation of Album is switched to landscape mode. Select a photo or video to view 1. On the main Album screen, tap Albums and then select the album to view.
Experiencing Multimedia 201 View an image While viewing an image in full screen, tap the screen to open the on-screen menu. Tap to send the image using one of the Messaging accounts. Tap to start the slideshow. Tap to go back to the main Album screen, Photos and Videos tab, or Camera. Tip Tap to open a menu where you can save the screen image as a photo for a contact, save the current image as a new file, delete the image, and view file properties.
Experiencing Multimedia To rotate the image While viewing images, you can automatically rotate the image by simply turning your device sideways. To view the next or previous image When viewing images in Portrait or Landscape mode, go to the next image by swiping your finger across the screen from right to left. Go back to the previous image by swiping your finger from left to right.
Experiencing Multimedia 203 To zoom in or out of an image While viewing an image, make a full circle motion on the screen with your finger. Slide your finger clockwise on an area to zoom in on that area. Tips Slide your finger counterclockwise to zoom out. • When you zoom in on an image, double tap the screen to automatically zoom out and fit the image to the screen. • When you zoom in on an image, tap and hold the screen so you can pan the image.
Experiencing Multimedia To view still images as a slideshow While viewing the slideshow, tap the screen to show playback controls. Note The screen orientation automatically switches to landscape mode when viewing a slideshow. Tap to open the slideshow options where you can set the transition effect to use, time per slide, and orientation of the images. Tap to return to the main Album screen or the Photos and Videos tab. Tap to go back to the previous image. Tip Tap to go to the next image.
Experiencing Multimedia 205 Play back video While playing back video, tap the screen to show the playback controls. Drag to go forward or backward in the video. Elapsed time Total duration Tap to go back to the beginning of the video. Tap to stop video playback. Tap to play or pause video playback. Tip If the video is in your favorite album, you can start the video playback from the Photos and Videos tab on the Home screen. On the Photos and Video tab, tap Play.
Experiencing Multimedia 11.3 Using Windows Media® Player Mobile Windows Media® Player Mobile plays digital audio and video files that are stored on your device or on a network, such as on a web site. Video File Formats Supported File Extensions Windows Media Video MPEG4 Simple Profile H.263 H.264 Motion JPEG .wmv, .asf .mp4 .3gp, .3g2 .mp4, .3gp, .3g2, .m4v .
Experiencing Multimedia 207 About the controls Tap and drag to jump to any part of the video or audio Mute/Unmute Full screen Increase volume Visit WindowsMedia.com Decrease volume Skip to the beginning of Skip to the next file the current file or to the Play/Pause previous file About the screens and menus Windows Media® Player Mobile has three primary screens: • Playback screen. The screen that displays the playback controls (such as Play, Pause, Next, Previous, and Volume) and the video window.
Experiencing Multimedia • Library screen. The screen that lets you quickly find your audio files, video files, and playlists. It contains categories such as My Music, My Videos, My TV, and My Playlists. At the bottom of each screen, you can open a Menu. The commands on this menu vary, depending on which screen you are viewing. For more information about the commands in these menus, see Help on your device.
Experiencing Multimedia 209 Note On the Device Setup dialog box, make sure that the Sync this device automatically check box is selected. 6. Click Finish. The files will begin synchronizing to your device. The next time you connect your device to your computer while Windows Media® Player is running, synchronization will start automatically. To synchronize content manually to your device 1.
Experiencing Multimedia 4. Click Start Sync to start synchronizing the selected files to your device. Notes • Use Windows Media® Player 11 or higher on your computer to synchronize media files to your device. • Audio files copy faster if Windows Media® Player is configured to automatically set the quality level for audio files copied to your device. For more information, see the Windows Media® Player Help.
Experiencing Multimedia 211 Playlists In Windows Media® Player Mobile, you can create a new playlist by saving the current Now Playing playlist and giving it a new name. To save a new playlist 1. If you are not on the Library screen, tap Menu > Library. 2. Tap to select a category (for example, My Music or My Playlists). 3. Select a media file that you want, then tap Menu > Queue Up. This adds the file to the Now Playing list.
Experiencing Multimedia 11.4 Using FM Radio FM Radio allows you to listen to FM radio stations on your device. Since FM Radio uses the provided stereo wired headset as an antenna, you must plug in the headset first onto the earphone jack of your device before you open the program. To open FM Radio Tap Start > Programs > FM Radio. The first time this program is used, it will automatically scan for available FM channels in your area, save them as presets, then play the first FM station found.
Experiencing Multimedia 213 Tip Tap Menu to choose more options for FM Radio, such as Scan & Save to perform a rescan of the FM band for available FM stations and save them as presets, and more. Radio display 1 Shows the status of FM Radio. 2 Shows the preset number when you select a preset FM station. 3 Shows the received signal strength. 4 Shows the radio frequency. 1 2 3 4 Adjust the volume Press the VOLUME CONTROL on the side of the device to adjust the FM Radio volume.
Experiencing Multimedia To listen to a preset FM station Do one of the following: • On the main FM Radio screen, tap the preset button that shows your favorite station. • On the Preset screen, select a preset number that shows your favorite station, then tap Listen. FM Radio main menu Tap Menu on the FM Radio screen to access options for the FM Radio program. • Scan & Save Automatically scan radio stations that can be picked up by the device and save them as presets.
Experiencing Multimedia 215 11.5 Using Audio Booster Audio Booster optimizes sound for a better listening experience. It provides preset moods, such as hip hop, jazz, rock, etc., and several enhancement presets that suit different types of music. To access Audio Booster Tap Start > Programs > Audio Booster. 5 1 Control Function 1 On Select the check box to enable or disable the equalizer. 2 Frequency band Drag the sliders to adjust the frequency.
Experiencing Multimedia To create a custom equalizer preset 1. Adjust the frequency bands to your desired values by dragging the equalizer controls. The selected values are indicated on top of the sliders. 2. Save your equalizer settings as a preset by tapping Menu > Save as Preset. 3. Enter a preset name and then tap Done. The preset you created will be added to the list box. To delete a custom equalizer preset 1. Tap the list box then select the Equalizer preset you want to delete. 2.
Chapter 12 Programs 12.1 Programs on your Device 12.2 Adding and Removing Programs 12.3 Adobe® Reader® LE 12.4 Calendar 12.5 Contacts 12.6 Comm Manager 12.7 Microsoft® Office Mobile 12.8 Notes 12.9 Java 12.10 SIM Manager 12.11 Tasks 12.
Programs 12.1 Programs on your Device The following are programs you can find on your device or install from the Application disc. Programs in the Start Menu Icon Description Office Mobile Use the complete suite of Microsoft® Office applications for your mobile device. Excel Mobile Create new workbooks or view and edit Excel workbooks. OneNote Mobile Create notes with text, photos, and voice recordings. PowerPoint Mobile View PowerPoint slides and presentations.
Programs 219 Programs screen Icon Description Games Play these pre-installed games: Bubble Breaker and Solitaire. ActiveSync Synchronize information between your device and a PC or the Exchange Server. See Chapter 5 and 7 for details. Adobe Reader LE View PDF (Portable Document Format) files on your device. Album View photos and videos that you captured using the device camera. See Chapter 11 for details.
Programs Icon Description Internet Sharing Connect your notebook computer to the Internet using your device's data connection. See Chapter 8 for details. Java Download and install Java applications, such as games and tools, on your device. Messenger This is the mobile version of Windows Live™ Messenger. See Chapter 8 for details. Notes Create handwritten or typed notes, drawings, and voice recordings. Opera Mobile This is the mobile version of the Opera browser. See Chapter 8 for details.
Programs 221 Icon Description Windows Live Use this mobile version of Windows Live™ to find information on the web. It also lets you sign into your Windows Live account so that you can access your Live Mail messages and send/receive instant messages in Live Messenger. See Chapter 8 for details. Windows Media Player Mobile Play back audio and video files. See Chapter 11 for details. YouTube™ Search for uploaded videos in YouTube and play them on your device. See Chapter 8 for details.
Programs 3. Connect your device to the computer. 4. Double-click the installation setup file. To uninstall a program 1. Tap Start > Settings > System tab > Remove Programs. 2. In the Programs in storage memory list, select the program you want to remove, then tap Remove. 12.3 Adobe® Reader® LE Adobe® Reader® LE is an application for viewing PDF (Portable Document Format) documents on your device. It supports a subset of the features found in the PC versions of Adobe Reader.
Programs 223 • Tap Tools > Go To > Page Number to enter a page number that you want to view. To search for text in the document 1. Tap Tools > Find > Text or tap in the toolbar. 2. Type in the text to be searched, then tap Find. The matched text in the document will be highlighted. 3. To view the next occurrence of the text, tap Tools > Find > Next. Tips • Adobe Reader LE displays a bookmark pane for the PDF files that contain bookmarks.
Programs • If it is a special occasion such as a birthday or a whole-day event, set the All Day option to Yes. • If there is a time frame for the appointment, set the start and end dates and times. 4. Specify the type of category for your appointment, so that it can be grouped with other related appointments. Tap Categories, then select a preset category (Business, Holiday, Personal, or Seasonal), or tap New to create your own category. 5. When finished, tap OK to return to the calendar.
Programs 225 View appointments By default, Calendar displays appointments in Agenda view. You can also look at your appointments in Day, Week, Month, and Year views. The highlighted hours here indicate the time of your appointments. The red box and arrows indicate that there are conflicting appointments. Tap to view appointment details. Tap to switch views. Agenda view • To see detailed appointment information in any view, tap the appointment.
Programs Send appointments To send a meeting request Use Calendar to schedule meetings via e-mail with contacts who use Outlook or Outlook Mobile. 1. Open the Calendar screen. 2. Schedule a new appointment, or open an existing one and tap Menu > Edit. 3. Tap Attendees, then tap Add Required Attendee or Add Optional Attendee and add the contacts whom you want to invite. Note You can specify if an attendee is required or optional only if your device is connected to a Microsoft Exchange 2007 server.
Programs 227 12.5 Contacts Contacts is your address book and information storage for people and businesses you communicate with. You can add the following types of contacts to your device: • Outlook contacts. Contacts that are stored on your device, which can be created on your device or synchronized with your PC or the Exchange Server. • SIM contacts. Contacts that are stored on the SIM card. Only a name and phone number can be stored for each entry. • Windows Live™ contacts.
Programs Add new contacts To add a contact on your device 1. Open the Contacts screen. 2. Tap New, select Outlook Contact, and enter the contact information. 3. In the File as field, choose how you want the contact name to appear in the contact list. 4. To add a photo of the contact, tap Select a picture, and then select the picture file or tap Camera to take a photo of the contact. 5.
Programs 229 Organize and search contacts To group similar contacts For easier management, you can group similar contacts by assigning them to categories. 1. Create a new Outlook contact or edit an existing Outlook contact. 2. Tap Categories. 3. Select a preset category such as Business or Personal, or tap New to create your own category. 4. When finished, tap OK.
Programs To send contact information via text messaging 1. On the Contacts screen, select a contact. 2. Tap Menu > Send Contact > Text Messages. 3. Select the contact information you want to send, then tap Done. 4. In the new text message, enter the mobile phone number of the recipient, then tap Send. 12.6 Comm Manager Comm Manager is a central location where you can easily turn on and off the communication features of your device such as the phone, Bluetooth, Wi-Fi, WiMAX, and data connection.
Programs 231 1 2 3 4 5 6 1 Switch Airplane Mode on or off. Turning on Airplane Mode turns off the phone, Wi-Fi and Bluetooth functions. For more information, see "To enable or disable Airplane Mode" in Chapter 2. 2 Switch the phone on or off. Tap Settings > Phone to set the ring tone and other phone settings. See Chapter 13 for details. 3 Switch Bluetooth on or off. Tap Settings > Bluetooth to configure Bluetooth on your device. See Chapter 9 for details. 4 Switch Wi-Fi on or off.
Programs 12.7 Microsoft® Office Mobile Microsoft® Office Mobile consists of the following applications: • Microsoft® Office Excel® Mobile lets you create and edit Excel workbooks and templates on your device. • Microsoft® Office OneNote® Mobile lets you create notes with text, photos, and voice recordings for synchronization later with Microsoft® Office OneNote® 2007 on your computer. • Microsoft® Office PowerPoint® Mobile allows you to view (not create) slide show presentations in *.ppt and *.
Programs 233 12.8 Notes Using Notes, you can create handwritten and typed notes, record voice notes, convert handwritten notes to text for easy readability, and more. To create a note 1. Tap Start > Programs > Notes. In the note list, tap New. 2. Choose an input method and then enter your text. Tip For more information about input methods and entering text, see Chapter 4. 3. When finished, tap OK to save and return to the note list. Notes • To select handwritten text, tap and hold next to the writing.
Programs To record a voice note You can create a stand-alone recording (voice note) or you can add a recording to a note. 1. Tap Start > Programs > Notes. 2. If you do not see the Recording toolbar, tap Menu > View Recording Toolbar. 3. Do one of the following: • To add a recording to a note, create or open a note. • To create a stand-alone recording, record from the note list. 4. Tap the Record icon ( ) to begin recording your voice. Tap the Stop icon ( ) when you are finished recording.
Programs 235 To download and install via Internet Explorer Mobile 1. Tap Menu > Install > Browser to open Internet Explorer Mobile. 2. Locate the MIDlet/MIDlet suite while connected to the Internet. 3. Select the MIDlet/MIDlet suite to download. 4. Information about the MIDlet/MIDlet suite is then displayed. Tap Continue. 5. Confirm to start downloading. 6. Select or a folder where to install the MIDlet suite to, then tap OK.
Programs To create folders 1. On the Java screen, tap Menu > New Folder. 2. Enter a folder name, then tap Create. To update a MIDlet/MIDlet suite Tap and hold a MIDlet/MIDlet suite, then tap Update. Alternatively, you can tap Menu > Actions > Update. Java will search for updates for the selected MIDlet/MIDlet suite where it was installed from before. To uninstall MIDlets Before you uninstall a MIDlet, make sure that it is not running. 1. Tap and hold the MIDlet, then tap Uninstall. 2. Tap OK to confirm.
Programs 237 To copy SIM contacts to your device If you have saved contacts on your SIM card, you can copy them into Contacts on your device. 1. On the SIM Manager screen, select the desired contact, or select all SIM contacts by tapping Menu > Select All. 2. Tap Menu > Save to Contacts. To copy contacts to the SIM card Only one phone number per contact name can be stored on a SIM card.
Programs 3. Under the Mark column, you can change the indicator that will be appended to the SIM contact names for each phone number type. To do so, select a phone type, tap Edit, enter your desired indicator, then tap Save. 4. After modifying, tap OK. 5. Tap Menu > Contacts to SIM. 6. Select the check boxes of the contact’s phone numbers that you want to copy to your SIM card, then tap Save. To store your SIM card’s phone number 1. On the SIM Manager screen, tap Menu > Tools > List of Own Numbers. 2.
Programs 239 12.11 Tasks Use Tasks to keep track of things you need to do. A task can occur once or repeatedly (recurring). Your tasks are displayed in a task list. Overdue tasks are displayed in red. A reminder will be displayed when you have new tasks to be completed. To create a task 1. Tap Start > Programs > Tasks. 2. Tap Menu > New Task, enter a subject for the task, and fill in information such as start and due dates, priority, and so on. 3.
Programs 12.12 ZIP The ZIP program increases the storage capacity of your device by allowing you to compress files in the conventional ZIP format. It also allows you to extract files from a zip file. To start ZIP on your device Tap Start > Programs > ZIP. Each time you start ZIP, it searches for files that have the .zip file extension, and displays these files on the Archive List screen. To open a ZIP file and extract files 1.
Programs 241 To create a new zip archive 1. Touch File > New Archive. 2. On the Save As screen, enter the zip file name and choose a folder where you want to save it. You can also choose whether to save the zip file on the device’s main memory or a storage card. 3. Touch Save. 4. Touch Menu > Action > Add. 5. Navigate to the folder that contains the files you want to archive. 6. Select files to add by doing one of the following: • Touch a file to select it.
Programs
Chapter 13 Managing Your Device 13.1 Copying and Managing Files 13.2 Settings on your Device 13.3 Changing Basic Settings 13.4 Using Connection Setup 13.5 Using Task Manager 13.6 Connecting to an External Display 13.7 Protecting Your Device 13.8 Managing Memory 13.9 Resetting Your Device 13.10 Windows Update 13.
Managing Your Device 13.1 Copying and Managing Files You can copy files between your device and computer, or copy files to a storage card installed on your device. You can also efficiently manage your files and folders using File Explorer. To copy files using Windows Mobile Device Center or ActiveSync 1. Connect your device to the computer. 2. Click File Management > Browse the contents of your device in Windows Mobile Device Center on your computer, or click Explore in ActiveSync on your computer.
Managing Your Device 245 the desired operation on the shortcut menu. To copy or delete multiple files, tap and drag over the desired files to select, tap and hold the selection, then choose the desired operation on the shortcut menu. To copy files to a storage card 1. Make sure that the storage card is properly installed on your device. 2. Tap Start > Programs > File Explorer and navigate to the appropriate folder. 3. Tap and hold the file you want to copy, then tap Copy. 4.
Managing Your Device Icon Description Lock Set a password for your device. Menus Set which programs will appear in the Start menu. Owner Information Enter your personal information on your device. Phone Customize phone settings such as ring tone, set a PIN number for your SIM card, and more. Sounds & Notifications Enable sounds for events, notifications, and more, and set the type of notification for different events.
Managing Your Device 247 Icon Description Customer Feedback Set your device to automatically send information about how you use Windows Mobile. By default, this option is disabled. Device Information See information about the firmware version, hardware, identity, and the duration of calls made on your device. Encryption Encrypt files on your storage card. Encrypted files will only be readable on your device. Error Reporting Enable or disable the device's error reporting function.
Managing Your Device Icon Description Regional Settings Set the regional configuration to use, including the format for displaying numbers, currency, date, and time on your device. Remove Programs Remove programs that you installed on your device. Screen Re-calibrate the screen, apply ClearType, and change the screen text size. Task Manager Stop running programs and set the ( ) button to end programs immediately when you tap the button. For more information, see "Using Task Manager" in this chapter.
Managing Your Device 249 Icon Description Comm Manager Manage your device’s connections (including EDGE/GPRS, Wi-Fi, Bluetooth, and WiMAX) or turn the phone function on or off. Connection Setup Configure your device’s data connections, such as GPRS, and WAP, based on the detected or selected network operator. See “Using Connection Setup” in this chapter for details.
Managing Your Device 13.3 Changing Basic Settings Date and time To set the date and time 1. On the Home screen Home tab, tap the time display and then tap the Time tab. Tip Tap the More tab and select the Display the clock on the title bar in all programs option to show the clock on all screens. 2. Select the correct time zone and change the date or time. Note During synchronization, the time on your device is updated with the time on your computer.
Managing Your Device 251 3. To customize regional settings further, tap the appropriate tabs and set the desired options. Display settings To adjust the screen brightness 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. On the System tab, tap Power > Backlight tab. 3. Adjust the brightness by dragging the slider under On battery power and On external power. Tip Select Auto adjust backlight to automatically adjust the backlight brightness according to the ambient lighting.
Managing Your Device Note If you synchronize multiple devices with the same computer, each device must have a unique name. To change the device name 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. On the System tab, tap About > Device ID tab. 3. Enter the device name. Notes • The device name must begin with a letter, consist of letters from A to Z, numbers from 0 to 9, and cannot contain spaces. Use the underscore character to separate words.
Managing Your Device 253 Alarms and notifications To set an alarm 1. On the Home screen Home tab, tap the time display and then tap the Alarms tab. 2. Tap and enter a name for the alarm. 3. Tap the day of the week for the alarm. Select multiple days by tapping each desired day. Tap again to deselect the day. 4. Tap the time to open a clock and set the time for the alarm. Tip You can drag the hour and minute hands of the clock to set the time. 5.
Managing Your Device Phone services Your device can directly link to the mobile phone network, and enable you to access and change the settings of various phone services for your device. Phone services may include Call Forwarding, Call Waiting, Voicemail, and more. Contact your wireless service provider to find out about the availability of phone services for your device. To access and change settings of phone services 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2.
Managing Your Device 255 Note If your SIM card supports multiple network operator profiles, the next message that appears will display network profile choices. Select the profile you want to use and tap OK. 2. When prompted to automatically configure your device to the proper network settings, tap Yes. Connection Setup configures your device’s data connection settings. 3. After the Connection Setup completes the configuration, tap Restart.
Managing Your Device 13.5 Using Task Manager Task Manager lets you view and stop running programs, configure the and enable the Quick Menu on the Home screen. button, To open Task Manager • Tap the Quick Menu button on the top right corner of the Home screen to open the Quick Menu, then tap . • On the Home screen, slide to the Settings tab and then tap All Settings. On the System tab, tap Task Manager. To switch back to a running program • Tap the program name in the Quick Menu.
Managing Your Device 257 To close running programs from the Task Manager 1. On the Task Manager screen, tap the Running tab. 2. Do one of the following: Tip • Select the check box of the programs that you want to close, then tap Stop Selected. • Tap Stop All to close all programs in the list. • Tap Menu > Stop All but Selected to close all programs except those which check boxes are selected. You can also close running programs from the Quick Menu on the Home screen.
Managing Your Device 13.6 Connecting to an External Display The TV Out function outputs the device’s screen contents and audio to an external display with an RCA cable socket such as a television. Notes • You need an HTC TV Out cable to be able to connect your device to an external display. The HTC TV Out cable is sold separately. • When you plug in the HTC TV Out cable to your device, you will not be able to play music files from the TouchFLO 3D Music tab.
Managing Your Device 259 13.7 Protecting Your Device Protect your SIM card with a PIN You can protect your SIM card from unauthorized use by assigning a PIN (personal identification number). The default SIM card PIN is provided by your wireless service provider. To enable the SIM card PIN 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. On the Personal tab, tap Phone > PIN tab. 3. Select the Require PIN when phone is used check box. 4. Enter the PIN number and then tap OK.
Managing Your Device 6. Tap OK. The next time the device is turned on, you will be prompted to enter your password. Notes • To ensure that you can always make emergency calls, do not begin your password with the digits of your local emergency number. • If you entered a hint, the hint will be displayed after the wrong password is entered five times. • Each time a wrong password is entered, the device response time gets longer until the device appears to be not responding.
Managing Your Device 261 13.8 Managing Memory To see how much memory is available for use 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. On the System tab, tap Memory > Main tab. The amount of memory allocated to data storage versus program storage is displayed, as well as the amount of memory in use versus the available memory. To see the available space of the storage card 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2.
Managing Your Device 13.9 Resetting Your Device Soft reset Occasionally, you may need to reset your device. A soft (or normal) reset of your device clears all active program memory and shuts down all active programs. This can be useful when your device is running slower than normal, or a program is not performing properly. A soft reset is also necessary after the installation of some programs. If a soft reset is performed when programs are running, unsaved work will be lost. RE 2.
Managing Your Device 263 Important If Encrypt files when placed on a storage card is enabled, backup all files from the storage card before using Clear Storage, hard reset, or updating the ROM system software. Otherwise you will no longer be able to access the encrypted files on the storage card. Use ActiveSync or Windows Mobile Device Center to transfer files between your storage card and computer. After the procedure, copy your files back to the storage card. To perform a hard reset 1.
Managing Your Device 13.10 Windows Update You can update Windows Mobile® on your device with the latest updates, security patches or fixes, if these are available. To set up Windows Update The first time you run Windows Update, you need to set up how you want Windows Update to check for patches on the Microsoft web site. 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. On the System tab, tap Windows Update. 3. On the Update Setup screen, tap Next. 4.
Managing Your Device 265 To change Windows Update options 1. On the Home screen, slide to the Settings tab and then tap All Settings. 2. On the System tab, tap Windows Update. 3. Tap Menu and select the option you want to change. • Tap Connections to change how the device connects to the Internet when checking for updates. • Tap Change Schedule to change how Windows Update checks for Windows Mobile® updates. 13.
Managing Your Device • Use the AC adapter to plug your device into an external power outlet whenever possible, especially when using a storage card or when using a modem or other peripherals. • Turn Bluetooth off when you are not using it. Make your device visible to other devices only when you are trying to establish a Bluetooth partnership. For more information about Bluetooth, see Chapter 9. • Turn off WiMAX or Wi-Fi when not in use. For more information about WiMAX and Wi-Fi, see Chapter 8.
Appendix A.1 Specifications A.
Appendix A.1 Specifications Processor Qualcomm® MSM 7201A™ 528 MHz Operating System Windows Mobile® 6.1 Professional Memory ROM: 512 MB RAM: 288 MB Dimensions (LxWxT) 115 mm x 62.8 mm x 12 mm (4.528 in x 2.472 in x 0.472 in) Weight 146.4 grams (5.164 ounces) with battery Display 3.8-inch TFT-LCD flat touch-sensitive screen with 480 x 800 WVGA resolution Network HSPA/WCDMA • 900/2100 MHz • Up to 2 Mbps up-link and 7.
Appendix 269 Battery • Rechargeable Lithium-ion or Lithium-ion polymer battery • Capacity 1350 mAh • Talk time: Up to 390 minutes for WCDMA Up to 310 minutes for GSM • Standby time: Up to 450 hours for WCDMA Up to 390 hours for GSM • Video call time: Up to 120 minutes (The above are subject to network and phone usage.) Expansion Slot microSD™ memory card (SDHC™ capable) AC Adapter Voltage range/frequency: 100 - 240V AC, 50/60 Hz DC output: 5V and 1A A.
Appendix Federal Communications Commission Notice This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Appendix 271 1.5cm separation distance between the user’s body and the back of the phone, including the antenna. The use of belt-clips, holsters and similar accessories should not contain metallic components in its assembly. The use of accessories that do not satisfy these requirements may not comply with FCC RF exposure requirements, and should be avoided. Safety Precautions for RF Exposure Use only original manufacturer-approved accessories, or accessories that do not contain any metal.
Appendix As with other mobile radio transmitting equipment, users are advised that for satisfactory operation of the equipment and for the safety of personnel, it is recommended that no part of the human body be allowed to come too close to the antenna during operation of the equipment. Your device has an internal antenna. Use only the supplied integral antenna.
Appendix 273 it is on, use the specific original manufacturer supplied or approved carrying case, holster, or other body-worn accessory SAR Information 0.540 w/kg @ 1g (Head) 1.23 w/kg @ 1g (Body) Telecommunications & Internet Association (TIA) Safety Information Pacemakers The Health Industry Manufacturers Association recommends that a minimum separation of six inches be maintained between a handheld wireless phone and a pacemaker to avoid potential interference with the pacemaker.
Appendix Turn the phone OFF in health care facilities when any regulations posted in these areas instruct you to do so. Hospitals or health care facilities may be using equipment that could be sensitive to external RF energy. WEEE Notice The Directive on Waste Electrical and Electronic Equipment (WEEE), which entered into force as European law on 13th February 2003, resulted in a major change in the treatment of electrical equipment at end-of-life.
Index A B A2DP 174 ActiveSync - about 219 - set up 104 - synchronize with computer 105 - synchronize with Exchange Server 128 Add and remove programs 221 Adobe Reader LE 219, 222 Airplane Mode 53, 231 Alarm 253 Album - about 199, 219 - close Album 205 - play back video 205 - select a photo or video to view 200 - view an image 201 Attachment - add to e-mail 121 - download 122 - set IMAP4 to automatically receive attachments 125 - set Outlook to automatically receive attachments 124 Audio Booster 215, 219
Index C Calculator 219 Calendar - about 218 - create appointment 223 - send appointment 226 - view appointment 225 Call History 52 Calling - from Contacts 47 - from Home screen 47 - from Phone screen 47 Camera - about 188, 219 - Advanced Options 196 - capture modes 188 - controls 190 - file formats 189 - icons 191 - Menu Panel 192 - specifications 269 - zooming 194 Car kit phones 63 Clear Storage 263 Clock & Alarms 246, 250, 253 Comm Manager 219, 230, 249 Compact QWERTY 91 Company Directory 136 Confere
Index 277 - send 120 - settings (POP3/IMAP4) 117 - setup wizard 116 - synchronize 100, 123, 128 - types of e-mail accounts 115 EDGE/GPRS - add new connection 146 Emergency call 48 Emoticon - Windows Live Messenger 160 Entering Information 88 Equalizer 215 Excel Mobile 218, 232 Exchange Server 128 F Favorite contacts 70 File Explorer 219, 244 Find contact - Company Directory 136 - on device 229 Finger gestures 84 Finger panning 85 Finger scrolling 84 FM Radio 212, 219 Forward e-mail 123 Full QWERTY 89 G G-
Index - install MIDlets/MIDlet suites from Internet 235 - manage MIDlets/MIDlet suites 235 - uninstall MIDlets 236 - update a MIDlet/MIDlet suite 236 L Letter Recognizer 96 Library - Music tab (Home screen) 78 - Windows Media Player Mobile 207 Live Messenger 159 M Mail tab (Home screen) 73 Meeting request 134, 226 Memory 42, 261, 268 Messages tab (Home screen) 72 Messaging - about 110, 218 - e-mail 115, 116, 119 - text (SMS) 111 Messenger 159, 220 microSD card - install 31 Microsoft Office Mobile 218,
Index 279 Play media 210 Play music - Music tab (Home screen) 77 - Windows Media Player Mobile 210 Podcasts 166 POP3 116 PowerPoint Mobile 218, 232 Programs 218 Programs tab (Home screen) 83 Put call on hold 50 Q QuickGPS 184, 220 Quick menu 42, 256 R Record - voice note 234 Regional Settings 248, 250 Regulatory notices 271 Remote Desktop Mobile 220 Reply - e-mail 123 - text (SMS) 73, 113 Reset - clear storage 263 - hard reset 262 - soft reset 262 Review screen (Camera) 195 Ring tone 82, 252 Ring type 252
Index - Certificates 246 - Clear Storage 246, 263 - Clock & Alarms 246, 250, 253 - Customer Feedback 247 - Device Information 247 - Encryption 247, 260 - Error Reporting 247 - External GPS 247 - Key Lock 247 - Managed Programs 247 - Memory 247 - Microphone AGC 247 - Power 247 - Regional Settings 248, 250 - Remove Programs 222, 248 - Screen 248, 251 - Task Manager 248, 256 - TouchFLO 41, 85, 248 - Windows Update 248, 264 Settings tab (Home screen) 82 SIM Access Profile (SAP) 63 SIM card - install 28 - PI
Index 281 Transcriber 97 Troubleshoot - sync connection 107 - Windows Media Player Mobile 211 Turn device on and off 33 Turn phone function on and off 231 Turn the phone function on and off 53 TV Out 258 U USB modem 168 USB to PC 107, 249 V Vibrate 39, 43, 51, 253 Video capture mode 189 Voice and Video over IP 58 - Answer a video call 58 - Change the call settings 59 - End a video call 59 - Make a video call 58 Voice call - about 47 - answer call 48 - end call 51 - make call 47 Voicemail 48 Voice over IP
Index
