M *** HTC BH M200 User Manual (The “***” can be any alphanumeric character 0-9, A-Z or blank for the marketing purpose, only different model designations on the marking plate for different markets. No safety concern.
Multi-language Contents English ................................................................................................................................. 1-23 Deutsch .............................................................................................................................24-49 Français .............................................................................................................................50-75 Italiano.......................................................
English Introduction.........................................................................................3 Congratulations .......................................................................3 Getting Started ....................................................................................4 BH M200 Headset Overview ....................................................4 Charging your Headset ............................................................5 Wearing your Headset .........................
English LED Indications ................................................................................. 13 Bluetooth Headset Specifications ..................................................... 13 Important Health Information and Safety Precautions ..................... 14 ELECTRICAL SAFETY.............................................................. 14 SAFETY PRECAUTIONS FOR POWER SUPPLY UNIT ................ 14 SAFETY PRECAUTIONS FOR DIRECT SUNLIGHT..................... 15 SAFETY IN AIRCRAFTS ........
Congratulations Congratulations on your purchase of the HTC BH M200 Bluetooth® mono headset. This headset includes a built-in microphone and earphone, which allows wireless communication between your mobile phone and headset. It uses Bluetooth 2.0 technology, and is downward compatible with devices using Bluetooth version 1.1 or 1.2 technology. Your BH M200 Bluetooth headset uses a built-in Lithium Polymer rechargeable battery, which gives long life to weight ratio.
English Getting Started BH M200 Headset Overview Fig. 1. Front, Back and Side View with Lanyard 5 6 1 7 2 3 8 4 4 1. Ear hook 5. Lanyard 2. Multi-function button (MFB)/ Status indicator LED 6. Charging port 3. Speaker 7. Volume up key 4. Microphone 8.
English Charging your Headset Make sure that your headset is fully charged before you start to use it. Use the charger to charge from a power socket, as shown in Fig. 2. Fig. 2. Charger Connection NOTE: Charge the headset for approximately 2 hours. The LED is Red while charging. While battery power is low, the headset beeps every 20 seconds, and the LED flashes Red constantly. Wearing your Headset The headset can be worn on either ear (see Fig. 3).
Fig. 3. Wearing Headset on Right/Left Side English Fig. 4. Ear Hook Rotation Fig. 5.
You can carry your headset around your neck using the lanyard. To fit your headset to the lanyard, insert the speaker part into the holder on the lanyard and push in until it clicks into place. To remove, pull out from the bottom of headset. Fig. 6. Lanyard Attachment Switching the Headset On or Off Switching on Press and hold the Multi-function button (MFB) for 3 seconds until the Blue LED comes on (it will then stay on for 3 seconds).
Switching off English Press and hold the MFB for 3 seconds until the Red LED comes on (it will then stay on for 3 seconds). NOTE: You can also switch the headset off during a call by holding the MFB for 6 seconds. The call will be transferred to your mobile phone. Pairing your Headset Your BH M200 Bluetooth headset needs to be paired to your compatible Bluetooth-enabled mobile phone before it can be used. Note that different Bluetooth devices use a different method to go through the pairing process. 1.
English Up to 1 meter Disconnecting your Headset from the Mobile Phone Do one of the following to disconnect your headset from your mobile phone: • Switch off the headset. • Move your headset more than 10 meters away from your mobile phone. • Disconnect your headset in the Bluetooth menu of your mobile phone.
English Phone Use Making a call While your headset is connected with your mobile phone, use your mobile phone in the normal way to make a call. Making a call with voice dialing If your mobile phone supports voice dialing, long press the Volume up key or Volume down key for 3 seconds to activate voice dialing. NOTE: Your mobile phone must support voice dialing and have voice tag(s) stored. Redialing last number Double-click the MFB to active last number redialing.
English refer to your mobile phone’s user guide for more information about this setting. Transferring a call between headset and mobile phone When activating a call, press and hold the MFB for 3 seconds to switch conversation between your headset and the mobile phone. Call swapping During a conversation, you can put a call on hold and answer a waiting call. If your mobile phone supports this feature: 1. Double-click the MFB to put the first caller on hold and answer the second call. 2.
English Muting a call During a conversation, press and hold the Volume down key for 3 seconds and the microphone will mute. You will hear a short beep sound every 4 seconds until you cancel mute by pressing and holding the Volume down key for 3 seconds. Adjusting sound and volume The headset offers 8 pre-set volume levels. • To increase the volume, press the Volume up key. • To decrease the volume, press the Volume down key.
Mode English LED Indications LED Indicator Power On Blue LED solid On for 3 seconds Power Off Red LED solid On for 3 seconds Pairing LED flashes Blue and Red alternately Charging On Red LED solid On Fully charged LED Off Battery low Red LED flashes constantly Idle mode Blue LED slow blinking Call active Blue LED flashes twice continuously Bluetooth Headset Specifications • • • • • • • Compatible with Bluetooth Ver. 1.1, 1.2, or 2.
English Important Health Information and Safety Precautions When using this headset, the safety precautions below must be taken to avoid possible legal liabilities and damages. Retain and follow all product safety and operating instructions. Observe all warnings in the operating instructions on the product. To reduce the risk of bodily injury, electric shock, fire and damage to the equipment, observe the following precautions.
This headset contains a Li-ion Polymer battery. There is a risk of fire and burns if the battery pack is handled improperly. Do not attempt to open or service the battery pack. Do not disassemble, crush, puncture, short external contacts or circuits, dispose of in fire or water, or expose a battery pack to temperatures higher than 60°C (140°F). WARNING! Danger of explosion if battery is incorrectly replaced.
English SAFETY IN AIRCRAFTS Due to the possible interference caused by this headset to an aircraft’s navigation system and its communications network, using this headset’s phone function on board an airplane is against the law in most countries. If you want to use this headset when on board an aircraft, remember to turn off your phone by switching to Flight Mode.
ROAD SAFETY Vehicle drivers in motion are not permitted to use telephony services with handheld devices, except in the case of emergency. Use of headphones while operating a vehicle is not recommended and is illegal in some areas. Be careful and attentive while driving. INTERFERENCE WITH MEDICAL EQUIPMENT FUNCTIONS This headset may cause medical equipment to malfunction. The use of this headset is forbidden in most hospitals and medical clinics.
English General Precautions • Heed service markings Except as explained elsewhere in the Operating or Service documentation, do not service any product yourself. Service needed on components inside the headset should be done by an authorized service technician or provider. • Damage requiring service Unplug the headset and refer servicing to an authorized service technician or provider under the following conditions: • Liquid has been spilled or an object has fallen into the product.
NOTICE: When taking the headset from low-temperature conditions into a warmer environment or from high-temperature conditions into a cooler environment, allow the headset to acclimate to room temperature before turning on power. • Avoid pushing objects into product Never push objects of any kind into cabinet slots or other openings in the product. Slots and openings are provided for ventilation. These openings must not be blocked or covered.
English Troubleshooting and FAQ If you cannot connect your headset to your mobile phone, do as follows, • Ensure your headset is properly charged, switched on, paired with and connected to your mobile phone. • Ensure Bluetooth feature of your mobile phone is activated. • Ensure the headset is within 10 meters range of your mobile phone, and there are no obstructions, such as walls or other electronics devices in between. • If it stops functioning, to reset the headset, plug the headset into a charger.
This product is CE marked according to the provisions of the R& TTE Directive (99/5/EC). Compliance with these directives implies conformity to the following European Norms. • ETSI EN 301 489-1 / -17 • ETSI EN 300 328 • EN 55022 • EN 61000-3-2; EN 61000-3-3 • EN 61000-4-2; EN 61000-4-3; EN 61000-4-4 • EN 61000-4-5; EN 61000-4-6; EN 61000-4-11 • EN 60950-1; IEC 60950-1 FCC (Federal Statement) This device complies with Part 15 of the FCC Rules.
English guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: ---Reorient or relocate the receiving antenna. ---Increase the separation between the equipment and receiver.
• RoHS Compliance This product is in compliance with Directive 2002/95/EC of the European Parliament and of the Council of 27 January 2003, on the restriction of the use of certain hazardous substances in electrical and electronic equipment (RoHS) and its amendments. 23 English The WEEE logo on the product or on its box indicates that this product must not be disposed of or dumped with your other household waste.
