User Guide

86 3A. Sprint Service: The Basics
Call Waiting
When you’re on a call, Call Waiting alerts you to
incoming calls by sounding two beeps. Your device’s
screen informs you that another call is coming in and
displays the caller’s phone number (if it is available and
you are in digital mode).
To respond to an incoming call while you’re on a call:
䊳 Tap answer. (This puts the first caller on hold and
answers the second call.)
To switch back to the first caller:
䊳 If you see a “TAP TO SWAP” notification message
at the top of the screen, tap that message.
– or –
Tap and then tap the
flash button.
Making a 3-Way Call
With 3-Way Calling, you can talk to two people at the
same time. When using this feature, the normal airtime
rates will be charged for each of the two calls.
1. On the Start screen, tap to open the Phone
application.
2. Tap to display the dial keypad.
3. Enter a number and tap call.
4. Once you have established the connection, 
tap , tap the
add call button, and dial the
number of the second participant. (This puts the
first caller on hold and dials the second number.)
5. When you’re connected to the second party, 
tap and tap the
merge calls button.
If one of the people you called hangs up during your
call, you and the remaining caller stay connected. If you
initiated the call and are the first to hang up, all callers
are disconnected.
To end the three-way call, tap
end call.
Tip: For those calls where you don’t want to be interrupted,
you can temporarily disable Call Waiting by pressing 
before placing your call. Call Waiting is
automatically reactivated once you end the call.