User Guide

28 Getting Started
Charge the battery
New batteries are shipped partially charged. Before you start using your
device, it is recommended that you install and charge the battery. Some
batteries perform best after several full charge/discharge cycles.
To charge the battery
• Connect the power adapter
to the device’s DC IN/SYNC
port.
• Connect the device to your
computer using the provided
USB Sync cable.
Note Only the AC adapter and USB
sync cable provided with your
device must be used to charge
the device.
Charging is indicated by a solid amber light on the Notification LED 1 (GSM)
indicator. As the battery is being charged while the device’s power is on, a
charging icon appears in the title bar of the Today screen. After the battery
has been fully charged, the Notification LED 1 charging indicator becomes
green and a full battery icon appears in the title bar of the Today screen.
Warning! • Do not remove the battery from the device while you are charging it
using the AC or car adapter.
• As a safety precaution, the battery stops charging when it overheats.
1.3 Starting Up
After installing your SIM card and battery and charging the PDA phone, you
can now power on and start using your device.
Turn your device on and off
To turn on the power
• Press and hold the POWER button for a few seconds.