User Manual

HTA106
EN – 2
1. SAFETY PRECAUTIONS AND PROCEDURES
This instrument conforms to safety guidelines relating to electronic measuring instruments.
For your own safety and that of the instrument, please follow the procedures described in
this instruction manual and specially read all the notes preceded by the symbol
carefully. Strictly keep to the following instructions before and during measurements:
 Do not perform measurements in environments with explosive gas, fuels or dust.
 Do not perform any measurement in case of unusual conditions of the instrument such
as deformation, breakage, leakage of substances, absence of display reading etc.
The following symbols are used on the instrument and in this manual:
Caution: refer to the instructions reported on this manual; improper use may
damage the instrument or its components.
1.1. PRELIMINARY INSTRUCTIONS
 Use the instrument only as specified in this manual otherwise, the protection provided
by the instrument may be impaired.
 Only the accessories supplied with the instrument guarantee compliance with the
safety standards. They must be in good conditions and must be replaced, if necessary,
with identical models.
 Do not perform measurements beyond the limits specified in this manual.
 Check that batteries have been placed correctly.
1.2. DURING USE
Carefully read the following recommendations and instructions:
CAUTION
No compliance with the Warnings and/or Instructions may damage the
instrument and/or its components or injure the operator.
 Use the instrument only within the temperature/humidity ranges specified in this
manual
 If during a measurement the read value or sign never changes, please verify if the
HOLD function is active
1.3. AFTER USE
 When the measurements are completed, please switch off the instrument
 Remove the battery when the instrument remains unused for long periods