User Manual

HT79
EN - 10
5.3. RESISTANCE MEASUREMENT
CAUTION
Before attempting any resistance measurement, remove power from the
circuit under test and discharge all capacitors, if present.
Fig. 6: Use of the instrument for Resistance measurement
1. Select the position. 
2. Insert the red cable into input terminal V and the black cable into input terminal
COM.
3. Position the test leads in the desired spots of the circuit to be measured (see Fig. 6).
The display shows the value of resistance.
4. Symbol “OL.” appearing on the display indicates the overload condition of the
instrument.
5. To use the HOLD function, please refer to § 4.3.1.