User Manual
HT211
EN - 8
5.2. AC VOLTAGE MEASUREMENT
CAUTION
The maximum input for AC voltage is 600V. Do not attempt to measure
higher voltages to avoid electrical shocks or damages to the instrument.
Fig. 3: Using the instrument for AC Voltage measurement
1. Switch on V
Hz% position
2. Insert the test leads into the jacks, the red plug into
mAµAVHz% jack and
black plug into COM jack
3. Connect the test leads to the circuit under test (see Fig. 3). The voltage value is
displayed
4. If the message "O.L" is displayed the higher range is reached
5. For use of HOLD, RANGE, MAX MIN functions please refer to § 4.2