User Manual
HT211
EN - 13
5.7. TEMPERATURE MEASUREMENT WITH TYPE K PROBE
CAUTION
Before taking temperature measurements in circuit remove power from the
circuit being tested and discharge all capacitors.
Fig. 8: Using the instrument for Temperature measurement
1. Switch on °C°F position.
2. Press the MODE key selecting the “°C” or “°F” unit
3. Insert the standard adapter accessory into mAµAVHz% jack (+ polarity),
and COM jack (- polarity) (see Fig. 8)
4. Connect the standard bead type K probe or the optional type K probe (see § 7.3.2) into
the adapter with respect the correct positive and negative polarity then temperature
reading is displayed
5. If the message "O.L" is displayed the higher range is reached
6. For HOLD function measurement refer to § 4.2