User Manual

HT211

EN - 10

5.4. RESISTANCE MEASUREMENTS

CAUTION

Before taking resistance measurements in circuit remove power from the

circuit being tested and discharge all capacitors.

Fig. 5: Using the instrument for Resistance measurement

1. Switch on

 . position. “M” symbol is displayed

2. Insert the test leads into the jacks, the red plug into

mAµAVHz% jack and

black plug into COM jack

3. Connect the test leads to the circuit under test (see Fig. 5). The resistance value is

displayed

4. If the message "O.L" is displayed the higher range is reached

5. For HOLD function refer to § 4.2