Manual

GSC53N - GSC57 - ZG47
EN - 7
 record simultaneously (pressing the START key after a proper
setting): RMS values of voltages, currents, corresponding harmonics,
active, reactive and apparent powers, power factors and cos , active,
reactive and apparent energies, voltage anomalies (voltage sag and
surge) with 10ms resolution. It will be possible to analyse the
recorded data ONLY by transferring them to a PC.
 record simultaneously (pressing the START key) values of Voltage
and Current values coming from test leads and Clamps, using
“Typical Configurations” with pre-programmed parameters inside
meter (see paragraph ).It will be possible to analyse the recorded
data ONLY by transferring them to a PC.
WARNING
Please note the difference between memorize and record. These terms
will be used repeatedly in this manual. Please focus on their definitions and
distinctions.