Manual

GSC53N - GSC57 - ZG47
EN - 83
8.3. ANALYSER FUNCTIONS
 For a simple usage, the main working mode of the ANALYSER mode can be
selected by means of F3 and F4.
 "VOLTAGE" function: to be used to display voltage and corresponding
harmonics (see paragraph 8.4)
 "CURRENT" function: to be used to display current and corresponding
harmonics (see paragraph 8.5)
 "POWER" function: it permits to display all the parameters measurable by
the instrument: voltage, current, active, reactive and
apparent power, power factor, cos and energy (see
paragraph 8.6)
 "ENERGY" function: to be used to display active, reactive and apparent
power, power factor, cos and energy (see paragraph
8.7)
More practically, we may schematise the right procedure of use the ANALYSER function
as follows:
1. Check and eventually modify the "ANALYSER CONFIG" settings of the instrument
2. Using F3 and F4, select the type of measurement to be taken
3. Connect the instrument to the electrical system to be tested
4. Evaluate the values of the parameters under test
5. If you want to record:
a) Decide what to record
b) Press MENU and check if the "RECORDER CONFIG" settings meet your
requirements.
c) Consider Typical Configuration recording (see paragraph 10.2).
6. Connect the External Power Supply A0050 (optional for GSC57).
7. Start the recording by pressing START/STOP key.