Manual

GSC53N - GSC57 - ZG47
EN - 67
7. AUX: MEASUREMENT WITH EXTERNAL PROBES
Turn the switch on AUX position.
The F4 function key effects the following operations:
 Pressing this key the instrument shows one of the following working
mode displayed circularly:
 Environmental Parameter & Leakage Current (mA, °C, °F, HR%, m/s, mV, Lux)
 Sound Level Measurement
The "Environmental Parameter & Leakage Current" mode allows the following operations:
 display in real time the values coming from external probes or clamps.
 memorize the values displayed (pressing SAVE key).
 record simultaneously (pressing the START key after a proper setting)
up to three Input signal simultaneously among the possibilities illustrated
above. It will be possible to analyse the recorded data ONLY by
transferring them to a PC.
 record (pressing the START key) an Input signal coming from an
External Probe or clamp, using “Typical Configurations” with pre-
programmed parameters inside meter (see paragraph 7.2.2).It will be
possible to analyse the recorded data ONLY by transferring them to
a PC.
WARNING
Please focus the difference between memorize and record: the former
means that the instrument stores in the memory only the actual values
displayed while the latter means that you want to store the course of the input
signals during a recording time (typically long).