Manual

GSC53N - GSC57 - ZG47
EN - 12
5. INITIAL SETTINGS
By pressing the MENU key the following screen will be displayed:
MENU GENERAL
SAFETY TEST MEMORY
ANALYSER MEMORY
RESET
ANALYSER CONFIG
RECORDER CONFIG
CONTRAST
DATE&TIME
LANGUAGE
It’s not possible to enter the MENU during a recording or a Real Time Energy
measurement. Pressing this button during a recording the display will show main recording
parameter (see paragraph 10.3)
5.1. HOW TO ADJUST THE CONTRAST
By pressing the keys F1 and F2, position the cursor on the CONTRAST item and confirm it
by pressing the ENTER key.
By pressing the keys F3 and F4, adjust the contrast (higher values correspond to a higher
contrast while lower values correspond to a lower contrast) and press the ENTER key to
SAVE the change or press ESC to quit the modification.
This setting will remain unchanged after turning off the instrument.
5.2. HOW TO SET DATE AND TIME
By pressing the keys F1 and F2, position the cursor on the DATE&TIME item and confirm
it by pressing the ENTER key.
The time is expressed as hh:mm (2 digit for hours, 2 digit for minutes) military time.
Press the ENTER key to SAVE the change or press ESC to quit the modification.
This setting will remain unchanged also after turning off the instrument.
5.3. HOW TO SET THE LANGUAGE
By pressing the keys F1 and F2, position the cursor on the LANGUAGE (EN) or LINGUA
(IT) item and confirm it by pressing the ENTER key.
By pressing the keys F1 and F2, position the cursor on the desired language and press the
ENTER key to SAVE the change or press ESC to quit the modification.
This setting will remain unchanged after turning off the instrument.