Manual
GSC53N - GSC57 - ZG47
EN - 103
9. SAVING RESULTS
The SAVE button can be used to store the displayed results related to the rotary switch
position:
SAFETY TEST and for AUX rotary switch position: pressing this key the instrument will
store the displayed result generating a corresponding record in the SAFETY TEST
MEMORY (see paragraph 11.1)
ANALYSER rotary switch position: pressing this key the instrument will store the
displayed result generating a "Smp" record in the ANALYSER MEMORY (see
paragraph 11.2)
Please note that Saving results is different from recording.
9.1. SAVING SAFETY TEST RESULTS
After a SAFETY TEST (function LOW , M , RCD, LOOP, EARTH) or during a real time
measurement in AUX position the user can press the SAVE button to store the displayed
result.
The REMINDER
PLACE parameter
isn't related to
Measurement Order
Number and can help
the user to remind the
place where he
performed the
measurement.
05.06.01
SAVE IN LOC. 006
OK? (SAVE/ESC)
REMINDER PLACE:009
Memory Location
REMINDER PARAMETER
The following keys are available:
F3, F4: to adjust the REMINDER PLACE.
SAVE: to store the test result associating to the actual REMINDER PLACE
ESC: to quit this mode without saving.
9.2. SAVING DISPLAYED VALUES OF ANALYSER FUNCTION
During a Real Time measurement (in ANALYSER function) if the user press the SAVE
button, a "Smp" record will be generate in the "ANALYSER MEMORY". This file contains
the Voltage and Current values present at instrument's input when the user pressed the
SAVE key.
Downloading these values to a PC (using the management Software) the Power, Energy,
Harmonics, etc values can be calculated and displayed as well.