Manual

GSC53N - GSC57 - ZG47
EN - 100
6. The values of the available electrical parameters will be displayed. For further details
see the paragraph relevant to the position of the switch.
7. You can eventually press HOLD to interrupt the updating in real time of the displayed
values.
8. You can press SAVE to save the displayed values (see paragraph 9.2).
9. If you want to record:
a) Check and, if needed, modify the values of the basic parameters (see paragraphs
8.1 and 8.2).
b) Check and, if needed, modify the recording parameters by pressing MENU (see the
paragraph corresponding to the position of the rotary switch selected).
c) To start the recording press START (see chapter 10.1).